Setting the time on a wrt160nl
On the status page of my wrt160nl the current time is shown as "Not Available". From the time stamps on the storage I'd guess that when I set it up last week it thought it was 00:00 on 1 Jan 2009. I've set up the time zone but can't find any way of setting up the time (and/or date), and there's nothing in the manual. Anyone know how the time is supposed to be set up? I assume it is supposed to know the time, otherwise the access restrictions won't work. Is it supposed to be looking for a network time server somewhere?
Solved!
Go to Solution.
Thanks for your help - I think I've found the problem. I 'm using the WRT160nl as a 4 port switch, media server and wireless access point; it seems it only looks for the time on its "internet" port, not on the default gateway on the LAN (which is where I'd assumed it would go as it knows that's where the internet actually is). So I've now done some messy reconfiguration that makes the default gateway on the "internet" port and it seems to have magically found the time. Not ideal but it seems to work. Life would be much easier if you could telnet on to the thing and find out what's really going on...
Similar Messages
-
How do you set the time period on IMAP email accounts (razr maxx)
Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-RichHey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?
-
Can't set the time on the 6500 Slide
I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left. -
How do I set the time in icloud mail?
I have tried to set the time zone in my account. It show CST, but is 2hours behind time and I cannot get it to change.
Hi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone -
Setting the time on 1300 bridges
stupid question, how do you set the clock on the 1300 bridges, specifically the 1310?
kieran
two issues
one the Cisco AP's do not have a clock like your PC if you set the time manually when the AP loses power or reboots the time is reset to the default and you need to set it again.
te]wo the better solution is to designate a time server for the AP to syncronize to.
either method can be configured by clcking services on hte WEB interface and then select NTP or SNTP depending on you IOS version. then entering the time server IP address in the proper box or typing in hte proper date and time in the fields below, if you select the time server method the date and time will be filled in automaticaly once the time is syncronized.
HTH
Bill -
i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
Attachments:
BX0265 ShelfLife DAQmx.vi 120 KBOkay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903.
You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum. If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum. Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me -
Timer works if I set the time before the current one
Hi,
I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
Here's the segmant:
private class ButtonResponder implements ActionListener
public void actionPerformed(ActionEvent event)
if (event.getSource() == exitButton)
System.exit(0);
if(event.getSource() == setButton)
int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
Calendar calendar = Calendar.getInstance();
calendar.set(Calendar.HOUR_OF_DAY, hour);
calendar.set(Calendar.MINUTE, min);
calendar.set(Calendar.SECOND, 0);
Date time = calendar.getTime();
timer = new java.util.Timer();
timer.schedule(new TimerTask()
public void run()
JOptionPane.showMessageDialog(null, "it is time");
, time, 5*1000);
if (event.getSource() == cancelButton)
timer.cancel();
}So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
Message was edited by:
OctavianBump the day if the time is less than current time.
Kaj -
How do you set the time for this forum??? Not in nerd pleas
how do you set the time for this forum?
There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.
-
Setting the time to UTC?
Okay my local time is 1 hour behind. My UTC time is correct. In /etc/rc.conf iI have "HARDWARECLOCK="UTC" but everywhere the time is displayed its in local time? Is there a way to set the time to UTC system wide?
Are you dualbooting windows btw? If you are, keep HARDWARECLOCK at localtime
-
Can I set the time ruler in the main window to minutes/seconds/milliseconds?
Is there a way to set the time ruler in the MAIN window to minutes/seconds/milliseconds?
It seems that the only ruler time display option is minutes/seconds/frames/subframes.
Or, failing that, is there a way to suppress the display of frames/subframes?
I have already figured out how to set the main ruler to time, and the LCD to minutes/seconds/milliseconds…it's just a matter of having that in the ruler as well.
Thanks.To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41 -
TS4020 how do i set the time my iCloud account to Sydney Australia
how do i set the time my iCloud account to Sydney
CheersHi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone -
Please help to set the time zone in a porper way
Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2 from sys.obj$ o, sys.col$ c, sys.user$ u
3 where c.type# = 231
4 and o.obj# = c.obj#
5 and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size 1375060 bytes
Variable Size 260048044 bytes
Database Buffers 159383552 bytes
Redo Buffers 6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM -
Newbie question.. but how do I set the time in CIMC?
What type of server do you have?
Is it a c-series server?
To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo. -
Setting the time in iPod Classic
Hello,
I set the time in 24 h mode as this is normal in Germany. When changing the time, the screen still shows the American way in 12 h mode. How can I change this, too?
Best regards
rudi_ratlosHi Jochen,
Clock control will display only the System time but you can change it by defining the 'Time Zone' dropdown in 'Display' tab of Clock properties.
Regards
Basheer -
Which computer sets the time stamp of a shared variable?
Which computer sets the time stamp of a shared variable? The computer that hosts the variable or the computer writing the variable?
(This is important when the system clocks differ.)
Greetings,
shb
Solved!
Go to Solution.Good Question - I have only one use case which is similiar...
I have a cRIO which hosts a NSV library which is bound to a mirror library on the PC. The PC library
is set to log to a Citadel DB. When my cRIO RT software writes values to the NSV the timestamp is created
at the instant the write occurs using the RT system clock (which incidentally is sync'd to GPS time). This timestamp is preverved all
the way up to the PC and the Citadel DB.
Maybe you are looking for
-
I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?
-
Modification of Sales Order after Partial Delivery
Here is a statement, I couldn't completely understand: "Once partial deliveries have been shipped, you cannot change any quantity or dates in the order. If data changes, the order item has to be rejected and re-entered" I made an order and went on ti
-
There is a little thing that always annoys me on mac. That is opening downloads. I use firefox, but the same thing happens on Safari too. That is when I click on a link, say a word document it gives me the option of downloading it, or opening it. Now
-
Where are the Photoshop 'default' textures?
Hi, I'm trying to complete a PS tutorial about making historical styled typography. The tutorial is online at www.tutorialhero.com. The tutorial uses two textures which are 'DIRT' and 'ROCKWALL' which it refers to as being found in, "Default Ph
-
Itunes on second external hard drive
I had itune on my dell lap top that a 20g hard drive. The music and videos i have took up all the space on my lap top. So i got a external hard drive and moved itunes to it. No music in the itunes Library now. I found the folder that has all my music