Setting the time on Linksys WRT610N wireless router

Using a Linksys WRT610N, v1, latest firmware installed.
I have been working on wireless access permissions for specific times but, after testing, it appears the time is off 7 or 8 hours. I checked the time zone and it is correct but I can't find anyplace to tell me what time the router thnks it is.
How do I tell what time the router thinks it is and how do I change the time?

Open the setup page of the router .
On the Basic Setup page at the bottom you will see the Time Zone settings .
Select the Time Zone in which you are .
See if that helps you .

Similar Messages

Setting up time capsule with existing wireless router and another time capsule

Hello,
I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
Is this true?? I find it hard to believe this issue hasn;t come up before.
Thanks,
Deborah

Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
Would I need to connect my time capsule directly to the router for first time set up?
If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
Thanks, I really appreciate your help!
Deborah

Setting up Time Capsule as primary wireless router and enabling port forwarding

I am attempting to setup my Time Capsule as the primary router on my wireless network. I have an Actiontec Verizon FIOS router that I am connecting the TC to using ethernet, and I was then going to turn off the wireless function on the Verizon router so that the TC will be the only wireless router. I am not exactly sure how to go about this, and I also have to connect a wireless device to the TC that requires a static IP address and port forwarding enabled so that I can access from my iPhone. I am completely lost on how to do this, any help will be greatly appreciated.

Unless Verizon has made a major change in the last few days, you will not be able to use the TC as the primary router......simply because it is not possible to configure the Verizon router to act as a simple modem......which is what it must do if you want to have the TC act as the primary router on your network.
As LaPastenague has explained. turning off the wireless on the Verizon modem/router will not make it a modem. It will still be a wired modem/router in charge of the network, not allowing the Time Capsule to take over the role of main router for the network.
But, let's assume that I am wrong. Please check with Verizon support and ask them........
1) If it is somehow now possible to configure their modem/router to act as a simple bridge mode modem. If they say that this is not possible (or they will not support this).....
2) Ask them if they can provide you with a simple, bridge mode modem......instead of the modem/router that you have now. A simple modem will have only one Ethernet port, and it will not offer any type of routing or wireless service at all.)

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Using Time Capsule with 2nd wireless router

Hi,
I have been trying to extend my time capsule and have had limited luck.
I have my time capsule in my office which is a separate building behind my house. The cable internet service runs to this location. I purchased an airport express and put that in the house so we would have wireless access in the house. I have tried every location available in the house and it is still really slow. (I get a transmit rate of 270 in the office. In the house it ranges from 7 to 20).
So, I was thinking maybe I could run a 30ft or so ethernet cable from the time capsule to another wireless n router in the house. So when out in the office I would connect to the TC and in the house to the Linksys (or whatever I buy). My question: would this even work? Can I have 2 wireless routers and would the Linksys work if it was connected via ethernet to the timecapsule vs. being connected directly to the cable modem?
Alternatively, can you connect 2 cable modems to one incoming cable line if I could find another cable modem somewhere?

Sure, happy to help.
Temporarily, move the Express close to your computer and connect an ethernet cable from your computer to the Express for the configuration.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your AirPort Express and click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode...set to Create a wireless network
Wireless Network Name...Exact same name as your Time Capsule network
Radio Mode....802.11n (802.11b/g compatible) would be a good choice
Wireless Channel...Automatic
Wireless Security....Exact same setting as your Time Capsule network
Wireless Password....Exact same setting as your Time Capsule network
Wireless
Click the Internet icon
Look for the setting for Connection Sharing at the bottom of the page and set this to "Off (Bridge Mode)"
Click Update at the lower right of the window and close AirPort Utility immediately and disconnect the ethernet cable as soon as you see the message that your settings have been stored.
You can now move the Express to the location you need and connect the ethernet cable and power it up.

Hi, I just bought a linksys WRT54G Wireless Router. My...

Hi,
I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
What is wrong?
Thanks in Advanced

Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Linksys WRT110 Wireless Router

I need to setup my Linksys WRT110 wireless router for wireless use as well as a router between my cable modem and my desktop PC. So far, I cannot find any documentation on how this is done or if it is possible at all. When I called Linksys support they told me it can be done and provided me with a link to the instructions, however, they did not work. Does anyone know if this is possible? I need to setup in order to work from home and I cannot use a wireless connection to my cable modem but I need a router between my desktop PC and my cable modem. Oh, by the way, I have a new HP desktop which is running Windows 7. I would appreciate any help someone can lend me. Thank you. SHH

From what i read on your post looks like your trying to use your wrt110 as a wireless access point and you want to still use your router near your modem.
To do this what you have to do is disable your wrt110 as a dhcp server since your other router near your is acting as the dhcp server.
So what you do is hook a cable to your wrt110 in port 1. type in 192.168.1.1 in the address bar of your internet explorer.For now this 192.168.1.1 number will get you into the wrt110 until you change it to 192.168.1.5 under setup you will see 2 areas. Under the ip address type in 192.168.1.5 so this make your wrt110 have this ip address.
Below that you will see DHCP server setting disable this. So your wrt110 will not act as the dhcp server it will act as a wireless access point.
Now if you type 192.168.1.1 in your web brower that will open the configuration screen of the router next to your modem. Which that dchp server setting will be enabled.
So basically from your modem your first router will route the signal from the modem thru the router to the computers hooked to it. then say you run a cable from that router to the wrt110.So basically your just uplinking to the wrt110. only thing is your wrt110 will have to act as a access point instead of a router.
Your main router configuration screen to get into it. you would type 192.168.1.1 in your brower after you setup your wrt110 an disable the dhcp server and set the ip to 192.168.1.5 when you type this number the 105 number in your browser it will go into the web config screen of the wrt110
So to access the web config screens of both routers they will have different numbers.
1st router by your modem will be 192.168.1.1
2nd wirless one will be 192.168.1.5 which you changed when you when in and disable it as a dhcp server since your 1st router by your modem acts as the dhcp server.
Hopefully this will help. I know it does get a little confusing been there and done that more then once. If not call linksys on the phone tell them what products you have and how you want it to work they will walk you thru it.
My setup in my home from my modem it connects to a 4 port router, then from there to a 24 port switch then uplinks with a Power over Ethernet adapter which sends power thru this little adapter over the brown pair in the cable so you dont need a electrical outlet where you put your wireless access point/router. Then from my switch it uplinks with that POE to a Wrt110 upstairs in my home. I know what a pain this can be i've call them more then once to get mine setup and working.
GOOD LUCK HOPE THIS HELPS

My Linksys E1200 wireless router stopped working

Hi, my Linksys E1200 wireless router stopped working. When my checked my network it said "Limited Connection." However, when I connect my ethernet cable directly to the modem my internet works fine.
Can someone help me with this?

@JeffNewYork
Are you getting that error hardwired to the router? Or wireless? Since the internet is working directly to your modem, you may need to reset and reconfigure the router depending on the settings from your Internet Service Provider (ISP).
Setting up a Linksys router with Cable Internet service
Setting up a Linksys router with DSL Internet service
Setting up a router with a Static IP account
Good luck!

Set up Time Capsule w/ belkin modem/router AND DSL splitter

G'day,
I've got an existing network set up and would like to add the Time Capsule into the network. I'd like to use my current hardware if possible but am willing to purchase stuff if I need to.
There are some posts on my model of Belkin modem/router, but it didn't really help me.
Here are my machines:
1) PC - desktop (ethernet networking card, Windows 7,
2) Laptop (wireless networking, Windows 7)
3) Macbook Air (wireless networking)
4) iPhone (wireless networking)
Here are my hardware:
A) Wall socket
B) DSL splitter (3 x ports - port for line, port for phone, port for modem)
C) Cordless phone
D) Belkin modem/router (model number F5D7633-4A - 1 x ADSL port, 4 x Ethernet cable ports)
E) Time Capsule
Here is my current set up:
Wall socket > phone cable > Splitter > phone cable to phone, phone cable to modem/router > ethernet cable from modem/router to PC
This solution gives me internet access via the ethernet cable to the PC and via the Belkin modem/router wirelessly to the Laptop. However, I haven't been able to connect my Macbook Air to this network yet - it doesn't seem to work.
So my question is, how can I include my Time Capsule into the network. Will I need another modem? I read about a bridge but I have no idea what that is or where to find that setting.
Also, can someone explain how to get my Macbook Air to connect to the network?
Can someone talk me through exactly what extra hardware I need and what I need to do to set it all up?
Cheers,
Chris

Hi Bob,
Thanks for chiming in. Could you talk me through how to do that? I'm a numpty and just haven't figured out which ports to plug which cords into, etc. If you or someone else could dumb it really right down that would be sweet.
Also, the Belkin is a modem/router, not a router. I am under the assumption that I need a modem to access the internet and that the Time Capsule is just a router.
Is that right?
Chris

Trying to setup my Linksys WRT54G Wireless Router but having trouble.

Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
If you can reply speaking English and not too much computer language that would be fantastic.
Many thanks

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

Find the documentation for your router and look up "Reset to Factory Defaults." This process will put the router back to the way it was when you bought it.

Time Capsule and FiOS wireless router

Can I connect the Time Capsule to my FiOS router and then disable the wifi feature on the FiOS router?

Are there any known issues with the TC in general, particularly from the wifi perspective?
TC is much better than it was.. make sure you keep it cool.. place it up from the bench on a couple of pencils.. that stuff about conductive rubber.. ignore it.. rubber in all its forms is an insulator and holds in heat. If it does start running really hot.. it has a fault and you should take it back.. Same with hard disk.. they occasionally go bad.. so backup to it.. fine.. storing files on it.. no don't do it.
Remember it is covered under your computer applecare.. so if you have any computer with extended applecare it will cover TC with certain conditions.. but that gives the TC effectively 3years warranty.. after that.. dispose of it and buy a new one.. the TC is not going to be reliable as the hard disk has been starting and stopping multiple times every day for 3years.. just don't trust them.
Wireless is ok.. I don't think it is particularly good range wise. Although Apple said how much better it was than previous Generations.. I have had all 4 now.. and performance in my experience was line ball between all of them. Apple design their routers to work very well with AEBS or AEx so if you want to extend wireless it is simple.. just it doesn't work with any other brand.. apple now reflecting a rather dark empire tendency.. they used to critize in others.
Clarification question...how do I backup my current files on the Lacie to the TC? Would that simply be connecting the two devices via USB and copying over?
Backing up TM files?? Not a good idea.. TM works differently on local disks and network disks.. and TC is best left to do its own stuff. If you mean moving actual file storage.. don't. The TC is not a file store.. it is a backup target.. TC has no way to back itself up.. and TM cannot backup a network drive .. so you would have to buy 3rd party software anyway.
Also USB on the TC is purely for printer and USB connected disk.. but you cannot directly copy from one to the other.. it would have to copy over network to the computer and then back to the TC.. it will be 2x to 4x faster if you do want to copy files to use Lacie plugged into the computer.. and copy to the TC. At least files are only going one way.

Linksys WRT54GSV4 Wireless Router

Hi
I have a Linksys WRT54GSV4 Wireless Router with frimware version 1.06.1.
I have a internet connection that can performe 100Mbit/s. But when i check my connection with "TP Test" I only get ~40Mbit/s. I do the test without the router and I get 80Mbit/s+.
Why is that? How do I get the router to pass through the traffic at high speed?
Thanks....

I guess you should get the latest firmware 1.00.9

How can I turn off my Linksys 1200 wireless router?

Hi,
I just got a Linksys 1200 wireless router and wanted to know how (and the best way) I can turn it off (besides unplugging it) when I am out of town?
Thanks

hi there.
there is no on/off switch in the router. these devices are meant to run 24/7 so there's no off on it.

Setting the time on Linksys WRT610N wireless router

Similar Messages

Maybe you are looking for