Setting the Time Ruler to BPM? Premiere CS3

Hi everyone,
is there a way to set the time ruler in the edit window to a bpm grid?
This would be awesome for Music Video Editing!
If a Band plays to click, you could easily enter the Bpm for the song and cut in a very quick way along the grid.
thank you for any advice!
-dom

Unfortunately, no.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Can I set the time ruler in the main window to minutes/seconds/milliseconds?

Is there a way to set the time ruler in the MAIN window to minutes/seconds/milliseconds?
It seems that the only ruler time display option is minutes/seconds/frames/subframes.
Or, failing that, is there a way to suppress the display of frames/subframes?
I have already figured out how to set the main ruler to time, and the LCD to minutes/seconds/milliseconds…it's just a matter of having that in the ruler as well.
Thanks.

To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41

Set the time interval when BPM read e-mail to get offline adobe forms

Hi masters
Do you know where I can set the time interval when the BPM read the e-mail account to get the off-line adobe forms received ? I think it is 10 minutes but I need to change to 1 minute.

there is a config attribute

How to set the Time Zone for BPM 10 g participant.

Hi All,
One BPM 10g(version 10.3.2) application runs on windows server. There are some participants assigned to some role. How to view and adjust the time zone of any existing participant.
Please advise. It's urgent.
Thanks,
Anupam

It's been a long time, but if I remember correctly - in 10g a participant sets this by logging into the Workspace and clicking "Settings". Believe the time zone is something that the individual end user can select there.
Dan

An attempt to set the time was aborted due to the offset being too large

Kindly tell us what this alert mean I am getting this alert on my one domain controller I have total 4 DC in my environment and all of them are in good health except this one which I am sending the below alert.
An attempt to set the time was aborted due to the offset being too
large
Alert Description
Source:
ServerName
Full Path Name:
Server Name
Alert Rule:
An attempt to set the time was aborted
due to the offset being too large
Created:
3/27/2015 5:33:23 PM
The time service has detected that the system time needs to
be changed by 190800 seconds. The time service will not change the system time
by more than 172800 seconds. Verify that your time and time zone are correct,
and that the time source DC Server Name
(ntp.d|0.0.0.0:123->172.16.0.75:123) is working properly.

Hi Syed,
>The time service has detected that the system time needs to be changed by 190800 seconds. The time service will not change the system time by more than 172800 seconds. Verify that your time and time zone are correct, and that the time source DC Server
Name (ntp.d|0.0.0.0:123->172.16.0.75:123) is working properly.
According to above message, you may need to logon to the server and make sure the time zone is set correctly.
You may follow the below step to sync time:
Click Start, point to All Programs, point to
Accessories, and then click Command Prompt.
Type w32tm /resync, and then press ENTER.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

Can't set the time on the 6500 Slide

I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.

Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

How do I set the time in icloud mail?

I have tried to set the time zone in my account. It show CST, but is 2hours behind time and I cannot get it to change.

Hi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone

Setting the time on 1300 bridges

stupid question, how do you set the clock on the 1300 bridges, specifically the 1310?

kieran
two issues
one the Cisco AP's do not have a clock like your PC if you set the time manually when the AP loses power or reboots the time is reset to the default and you need to set it again.
te]wo the better solution is to designate a time server for the AP to syncronize to.
either method can be configured by clcking services on hte WEB interface and then select NTP or SNTP depending on you IOS version. then entering the time server IP address in the proper box or typing in hte proper date and time in the fields below, if you select the time server method the date and time will be filled in automaticaly once the time is syncronized.
HTH
Bill

How do i set the time frame of a waveform chart programmatically to be a 30 sec window or a 24 hour window

i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
Attachments:
BX0265 ShelfLife DAQmx.vi ‏120 KB

Okay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903.
You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum. If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum. Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Timer works if I set the time before the current one

Hi,
I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
Here's the segmant:
private class ButtonResponder implements ActionListener
          public void actionPerformed(ActionEvent event)
                if (event.getSource() == exitButton)
                              System.exit(0);
               if(event.getSource() == setButton)
                    int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
                    int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
                    Calendar calendar = Calendar.getInstance();
                    calendar.set(Calendar.HOUR_OF_DAY, hour);
                    calendar.set(Calendar.MINUTE, min);
                    calendar.set(Calendar.SECOND, 0);
                    Date time = calendar.getTime();
                timer = new java.util.Timer();
                    timer.schedule(new TimerTask()
                         public void run()
                              JOptionPane.showMessageDialog(null, "it is time");
                    , time, 5*1000);
               if (event.getSource() == cancelButton)
                    timer.cancel();
          }So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
Message was edited by:
Octavian

Bump the day if the time is less than current time.
Kaj

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

Setting the time to UTC?

Okay my local time is 1 hour behind. My UTC time is correct. In /etc/rc.conf iI have "HARDWARECLOCK="UTC" but everywhere the time is displayed its in local time? Is there a way to set the time to UTC system wide?

Are you dualbooting windows btw? If you are, keep HARDWARECLOCK at localtime

TS4020 how do i set the time my iCloud account to Sydney Australia

how do i set the time my iCloud account to Sydney
Cheers

Hi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone

Please help to set the time zone in a porper way

Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?

SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2    from sys.obj$ o, sys.col$ c, sys.user$ u
3   where c.type# = 231
4     and o.obj# = c.obj#
5     and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size                  1375060 bytes
Variable Size             260048044 bytes
Database Buffers          159383552 bytes
Redo Buffers                6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM

Setting the Time Ruler to BPM? Premiere CS3

Similar Messages

Maybe you are looking for