Setting the User Code for RICOH Aficio MP C 4000

Hi guys, initially I had trouble setting my office network printer. But the thread at http://discussions.apple.com/thread.jspa?threadID=2235451 helped a lot. Now I am still stuck as the office uses "user codes" for each of the staff but when I tried to set it up, i couldn't punch in any numbers as only 4 options were presented ie nos from 1001-1004.
I might be wrong but it seems to me that the user codes could be hardcoded in a text file somewhere. Question is how do I do that?
Thanks

so ive read and done everything on this feed. i also noticed that this question was marked at answered but it doesnt seem like the answer should be to hook into another printer.
im trying to print to my office printer, Ricoh aficio mp c5000, and im so close i can taste it but i must be missing something.
ive called applecare, ricoh, downloaded wayyy too many drivers, done everything in this feed and still nothing... well not exactly.
when i hit print the printer wakes up and makes noise but it doesnt pickup any paper or actually print. i can hear things startup and start spinning but nothing prints.
i know that for all the pc's that work on this printer, have to print in black and white or otherwise enter a Valid Access for color. I dont even see the option of valid access in the print settings.
also
i saw an option of finisher, option tray, upper internal tray, and internal shift tray. would those settings play a part as to why im not printing (using the Ricoh Aficio MP C5000 PXL driver)
Please help

Similar Messages

BAPI/FM for setting the user status for the Project definition and WBS elem

Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
Shiva

Hi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu

How do I set the region code for my Mac?

I have been using my powerbook since 2004. I must have changed the region code once before for the DVD player. But since then any and all DVD's have played - unless the DVD itself had a problem. A few days back i put in a DVD which needed region change. Without thinking I changed it and now I have DVD's that used to play before, not play anymore. Please let me know how I can put the region code back to what it was - where all DVD's played.
I don't think I have changed the region code five times - but can one really nor change the code once it has changed the fifth time???????? Please advice.

I got a prompt when I had inserted the DVD which needed region change. But not now when I put in any other DVD. Some work, some don't. Is it not true that when changing the fourth time, the machine gives some indication that the next time will be the last? I thought so, whcih is why I am wondering, why it is not prompting or warning me.

My daughter set the lock code for my second or first generation ipod and i dont know what numbers she pressed. The ipod was loaded on a pc in Texas, and i'm currently in Georgia. I have a laptop, but I dont want to wipe out all my music. HELP!!!

My daughter has interrupted business as usual because she decided to change the passcode on my ipod. This is a first or second generation nano maybe, and it was loaded on a pc in Texas. I dont want to lose the songs that my mom loaded for me because they're irretreivable. Could someone tell me the process to unlock my ipod from my laptop, but reserve my exsisting music?

Try connecting the iPod to the computer your normally sync it with. Then properly eject it. Upon doing so, you may discover that your iPod is unlocked. If it is, make sure to disable the Screen Lock or change the code to something you can remember.
Otherwise, if that doesn't work, your only option at that point is to restore the iPod via iTunes. And yes this will involve wiping all content and settings from the iPod. Afraid there is no other way.
B-rock

DVD Player Hasn't set the REGION code

I just got a new MacBookPro (a replacement for one that had failed). Well, I restored all my data and am working fine... BUT...
I think all my settings think that I've already set the Region Code of the DVD drive. But, using a tool, I was able to verify that the region code has NOT been set.
How can I force DVD Player to set the region code of the DVD Drive? Right now, I can't play anything.
Thanks!

Hi Jack and welcome!
Until I read the last sentence my answer would have been: insert a commercial DVD intended for your region code (unhelpfully you don't say where you are!), i.e. NTSC for the US or PAL for Europe, and it will ask you set the region code for that DVD.
Remember: you can only ever do this five times, so best not to play DVDs from other regions.
But then you spoilt it all by saying "Right now, I can't play anything"!
What did you try to play?
Did you repair permissions?

Required the transaction code for the user exit

Hi Abap Gurus,
        i want to find out the *sap transaction code for which the user exit belongs to from the below code i am getting the enhancement name and the type.
i want to know the transaction code for exit EXIT_SAPLMEKO_002 and EXIT_SAPLFYTX_USER_001
data: begin of it_modsap occurs 0,
        name   type modsap-name,
        typ    type modsap-typ,
        member type modsap-member,
      end of it_modsap.
type-pools:slis.
data:wa_layout type slis_layout_alv.
data:it_sort   type slis_t_sortinfo_alv.
data:wa_sort   like line of it_sort.
parameters:p_exit type modsap-member.
select * from modsap into table it_modsap where member = p_exit.
read table it_modsap index 1.
select * from modsap into table it_modsap where name = it_modsap-name.
wa_layout-colwidth_optimize = 'X'.
wa_sort-fieldname = 'NAME'.
wa_sort-tabname   = 'IT_MODSAP'.
wa_sort-up        = 'X'.
append wa_sort to it_sort.
clear wa_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
    i_callback_program = sy-repid
    i_structure_name   = 'MODSAP'
    is_layout          = wa_layout
    it_sort            = it_sort
tables
    t_outtab           = it_modsap.

HI
The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23' 'ME23N' 'ME31L' 'ME31'   'ME32L' 'ME32' 'ME33L' 'ME33' 'ME38'   'ME39' 'VL31N' 'VL32N' 'VL33N'.
This is basically used for tax calculation purposes.
The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
Also use user exit for your business scenario.
Br
Vijay V

How do I set my Region Code for the DVD player?

When I insert a DVD, it is not prompting me to set the region code and I cannot figure out how to set it manually. When I insert a DVD, I get an error message that says "supported disk not availabe". I have already run the Repair Disk Permissions from disk utility and that didn't work so I thought maybe the problem is with the region coding. Your help is appreciated!! Thanks.

http://support.apple.com/kb/ht2397

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

How to pass the User Group for a SQ00 Transaction iView

Hello,
To start off, I am relatively new to SAP technology in general. I may be missing something obvious.
I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend. I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
My problem is that the query that I need to run is not in the default User Group that comes up by default. So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created. From that screen I can navigate to the correct User Group and then run query. There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
Is their an application parameter that I can initially pass to set the User Group?
Thank you.

And my lecturer is suck, every lectures she just read
the slices and never explains why and how they are.
(If ask her, she talks and talks rubbish and
eventually I get nothing)Maybe you should drop the class and complain to the administration.

How to set the user's Default joboptions directory?

Hello Experts,
When we installed Acrobat Pro 8.x on our Win XP Pro systems our systems were NOT in a Windows Domain. At that time the default location for user-created/customized joboptions files was:
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
where <Username> is the name of the LOCAL Windows user.
A few years ago we migrated to a Windows Domain and converted our LOCAL users to domain users and disabled, but did not delete, the LOCAL user's account. We did not remove the LOCAL user's Documents and Settings directory structure either.
Our users now log into a DOMAIN rather than the LOCAL account.
As a result of that process the user's Documents and Settings directory structure changed to;
C:\Documents and Settings\<Username.DOMAINNAME>
where DOMAINNAME is, of course, our Windows Domain Name.
Now we are beginning to use Acrobat Distiller joboptions and I notice that when Acrobat/Distiller goes to save a user-created/customized joboptions file the default location has remained;
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
which is NOT the user who is logged in
Acrobat/Distiller should use the Documents and Settings directory of the user who is actually logged in which is;
C:\Documents and Settings\<Username.DOMAINNAME>\Application Data\Adobe\Adobe PDF\Settings
This anomaly has created some confusion and appears to have created a dependency of the old LOCAL user's Documents and Settings directory preventing us from deleting it.
Question:
How can we force Acrobat/Distiller to use the Documents and Settings directory of the logged in user (eg: the Domain user)?
In other words, how do we set the user's default joboptions directory?
Pointers/tips/and tricks are most welcome.

if the user is the one running the program, you can always get the home directory using System.getProperties ("user.home");
If you are trying to get the properties of another user, you could try using setProperties to change the user name first, before getiting the home directory, but it probably won't work because of the security manager. You could read the /etc/passwd file and parse the path out, but once again, the user of the code would have to have appropriate permission.

Jdev11G XMLMenuModel : Setting the "destination" attribute for the itemNode

Hi,
I am trying to set the "destination" attribute for the itemNode in the metadata.xml.This is the URI to which the user must be taken on clicking that node. But it is unable to pick the URI set for the destination attribute and hence there is no navigation that happens.Using the "action" attribute works fine. But I need to use the "destination" attribute.
Here are some of the files:
The metadata.xml (root_menu.xml):
<?xml version="1.0" encoding="windows-1252" ?>
<menu xmlns="http://myfaces.apache.org/trinidad/menu">
<groupNode id="groupNode1" idref="itemNode1" label="Merchant">
<itemNode id="itemNode1" label="Sites" action="site_action" rendered="#{testBean.test}"
focusViewId="/common/site/Site.jspx">
</itemNode>
<groupNode id="groupNode2" idref="itemNode2" label="Settings">
<itemNode id="itemNode2" label="Page Template" action="template_action"
focusViewId="/common/template/TemplateRules.jspx">
</itemNode>
<itemNode id="itemNode3" label="Configuration Parameters" destination="http://www.google.com"
action="config_action" focusViewId="/common/others/ConfigurationParameters.jspx">
</itemNode>
</groupNode>
<groupNode id="groupNode3" idref="itemNode4" label="System Admin">
<itemNode id="itemNode4" label="Cache Invalidation" destination="/faces/common/others/CacheInvalidation.jspx"
focusViewId="/common/others/CacheInvalidation.jspx">
</itemNode>
</groupNode>
</groupNode>
</menu>
The faces_config.xml:
<?xml version="1.0" encoding="windows-1252"?>
<faces-config version="1.2" xmlns="http://java.sun.com/xml/ns/javaee">
<application>
<default-render-kit-id>oracle.adf.rich</default-render-kit-id>
</application>
<navigation-rule>
<navigation-case>
<from-outcome>site_action</from-outcome>
<to-view-id>/common/site/Site.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>template_action</from-outcome>
<to-view-id>/common/template/TemplateRules.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>config_action</from-outcome>
<to-view-id>/common/others/ConfigurationParameters.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>cache_action</from-outcome>
<to-view-id>/common/others/CacheInvalidation.jspx</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>root_menu</managed-bean-name>
<managed-bean-class>org.apache.myfaces.trinidad.model.XMLMenuModel</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>createHiddenNodes</property-name>
<value>false</value>
</managed-property>
<managed-property>
<property-name>source</property-name>
<property-class>java.lang.String</property-class>
<value>/WEB-INF/root_menu.xml</value>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>testBean</managed-bean-name>
<managed-bean-class>testBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</faces-config>
Can you please tell me what else has to be set for the "destination" attribute to work?
Thanks,
Swapna

The code you sent is not clear, could you send your jspx page.
Thanks

Setting the User Code for RICOH Aficio MP C 4000

Similar Messages

Maybe you are looking for