Setting the value of a parameter
Hi Experts
I want to call transaction ME55 through a Z program and stop at the selection screen with values of ZPROGRAM. There is one parameter which does not have a parameter id. Is there any way to set it.
Also we cannot do submit because there is code in ME55 based on sy-tcode. So while we do submit then the TCODE is of our ZPROGRAM and hence ME55 shows different output. Can we deal with this?
Also if we write BDC then the ME55 is behaving unexpectedly ie we wrote a BDC till the first screen of ME55 and then we excute it and try to release it , it releases the PR but instead of stopping at that screen which it would have done if we run ME55, it is coming back to our ZPROGRAM.
Please help to solve the problem ie set the value of the parameter.
Which parameter are you trying to set?
Similar Messages
-
Changing the value of a parameter that has been passed into an SSRS 2008 R2 report
I support 200+ reports that all use stored procedures and have many drill downs with built in URLs.
I want to do the below to avoid creating a brand new parameter that I will have to add to literally hundreds of places.
We have what I'll call Param1 that receives a value from the user. That Param1 is passed to the stored procedure(s) for the report and also embedded in any Action URLs for drill downs to other reports from that report. All works great.
Now I have a need to concatenate a string to whatever value they supplied which provides context for the environment in which they are running. The reason I want to do this instead of creating a new parameter is because I need this in all my reports
and as stated above I would have to make 100s of changes to make that happen. If I can figure out a way to concatenate a value to the existing Param1 value I can greatly reduce the number of changes.
I can't seem to be able to find a way to modify the value on an existing parameter that is passed into the report prior to report execution.
I get an error when I simply try to concatenate something to the parameter in its Default property.
I can't find a way to update a parameter value in the Report Code block. There don't appear to be any methods available on the Parameter Collection to set the value of a parameter.
Any ideas?
Thanks!
NathanCreate a new parameter. Mark it internal, set it's value by expression to:
=User!UserId+"MyNewValue"
and pass it to the proc?
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question. -
In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file
In flex, How to set a value to one parameter, the parameter
defined in a cffunction in a cfc file, In the cffunction there are
much cfargument, I want set a value to one of them, such as the
cfc:
<cffunction access="remote" name="myShow" output="false"
returntype="struct">
<cfargument name="ID" type="numeric" default=0>
<cfargument name="GoodsID" type="string" default="">
<cfargument name="DestTime" type="string" default="">
<cfargument name="DestCount" type="numeric" default=1>
How I set a value to only parameter one of them , such as set
GoodsID when use mx:remoteObject.
Thanks for your helpGot maybe a solution for you, I have just tested it.
So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
select #Var1+#Var2 from dual
This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
Hope it helps.
Shamil -
Not able to set the value in marketing context node for BP_HEAD
Hi,
I am trying to set the value in marketing node of BP_HEAD from bp_addr component. i am calling the set_property method but it is not changing the value, when i debugg the code, it actually changing the value in bol structure but it is not calling the get/set method of bp head.
i am working on BP corporate person creation i.e. in bp_head component and account details view. I added the marketing attributes in UI configuration and also the address attributes.
this is what i coded in get method of country in standardaddress context node of BP_ADDR
lv_entity ?= current.
IF lv_entity IS BOUND.
lv_parent = lv_entity->get_parent( ).
IF lv_parent IS BOUND.
lv_entity_mkt = lv_parent->get_related_entity( iv_relation_name = 'BuilMarketingRel' ).
IF lv_entity_mkt IS BOUND.
CALL METHOD lv_entity_mkt->set_property
EXPORTING
iv_attr_name = 'ATTRIBUTE'
iv_value = attribute1.
Can anyone please guide me on how to set the value cross component and can we call the get/set method of that attribute which is not in same component?
Regards,
Kamesh BathlaSorry, what I said was rubbish, because the LSMW and the session run in different external sessions.
I have searched forum for these terms: "company BUK parameter BDC background"
These threads Is it possible to set default company code in SM35? and Release BDC in SM35 in background, How to set defaul company code? seem promising, but I'm not sure they really solve.
In case these threads don't help you, I think you can create your own Z transaction which sets the BUK parameter id and then does a LEAVE TO TRANSACTION 'ABAON'. Then create again the recording on the Z transaction.
If you are using ECC6, then you may also enhance the standard to reset BUK parameter id at the very beginning of ABAON, in case it's run in batch input (sy-binpt = 'X'). Be careful as sometimes SAP does batch input on some transactions, so that could make the standard fail.
Last thing, you can contact SAP support, though it might probably be considered as consulting. -
Setting the value of dropdown according tio 1st dropdown values
Hi All,
I have a requiremnt.
My code is like this.
DATA: LV_GROUP TYPE QCODEGRP,
LV_CODE TYPE QCODE,
LV_GROUP_FIELDNAME(30) TYPE C,
LV_CODE_FIELDNAME(30) TYPE C.
§ 4.The event DOUBLE_CLICK provides parameters for row and column
of the click. Use row parameter to select a line of the
corresponding internal table.
" break-point.
FIELD-SYMBOLS TYPE LVC_T_MODI.
DATA: LS_MODI TYPE LVC_S_MODI.
CASE E_FIELDNAME.
WHEN 'PART_CODE' OR 'PART_GROUP'.
PERFORM F4_GET_CATALOG_SELECTION USING TQ80-OTKAT
CHANGING LV_CODE
LV_GROUP.
LV_GROUP_FIELDNAME = 'PART_GROUP'.
LV_CODE_FIELDNAME = 'PART_CODE'.
WHEN 'JOB_CODE' OR 'JOB_GROUP'.
PERFORM F4_GET_CATALOG_SELECTION USING TQ80-FEKAT
CHANGING LV_CODE
LV_GROUP.
LV_GROUP_FIELDNAME = 'JOB_GROUP'.
LV_CODE_FIELDNAME = 'JOB_CODE'.
WHEN 'ACTIVITY_CODE' OR 'ACTIVITY_GROUP'.
PERFORM F4_GET_CATALOG_SELECTION USING TQ80-MFKAT
CHANGING LV_CODE
LV_GROUP.
LV_GROUP_FIELDNAME = 'ACTIVITY_GROUP'.
LV_CODE_FIELDNAME = 'ACTIVITY_CODE'.
WHEN OTHERS.
EXIT.
ENDCASE.
FORM F4_GET_CATALOG_SELECTION USING P_CATALOG
CHANGING P_CODE
P_GROUP.
DATA:
LV_CATALOG LIKE QKAT-KATALOGART,
LV_H_CODE LIKE VIQMFE-FECOD,
LV_PICK TYPE C,
LV_RETN TYPE C,
LV_DISP TYPE C,
W_NOTIF_CATALOG LIKE LINE OF G_NOTIF_CATALOG,
I_CODEGRP LIKE QPK1CODEGRP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_QPK1CD OCCURS 10.
INCLUDE STRUCTURE QPK1CD.
DATA: END OF I_QPK1CD.
LV_CATALOG = P_CATALOG.
LV_H_CODE = '*'.
LV_PICK = 'X'.
LOOP AT G_NOTIF_CATALOG INTO W_NOTIF_CATALOG WHERE QKATART = LV_CATALOG.
MOVE W_NOTIF_CATALOG-QCODEGRP TO I_CODEGRP-CODEGRUPPE.
APPEND I_CODEGRP.
ENDLOOP.
CALL FUNCTION 'QPK1_GP_CODE_SELECTION'
EXPORTING
I_KATALOGART = LV_CATALOG
I_CODEGRUPPE = CDGRP
I_CODE = LV_H_CODE
I_SPRACHE = SY-LANGU
I_PICKUP_MODE = LV_PICK
I_DISPLAY_MODE = LV_DISP
I_RETURN_IF_ONE = LV_RETN
TABLES
T_QPK1CDTAB = I_QPK1CD
T_CODEGRPTAB = I_CODEGRP
EXCEPTIONS
NO_MATCH_IN_RANGE = 01
NO_USER_SELECTION = 02
NO_AUTHORIZATION = 03
NO_SELECTION_SPECIFIED = 04
OBJECT_LOCKED = 05
LOCK_ERROR = 06
OBJECT_MISSING = 07.
CHECK SY-SUBRC = 0.
READ TABLE I_QPK1CD INDEX 1.
P_CODE = I_QPK1CD-CODE.
P_GROUP = I_QPK1CD-CODEGRUPPE.
My requirement is that I want to set the values of job_group and activity_group equal to values of part group drop down. I want to just select the value of part_group from the f4 option and other values should auto populate with same values.
Please help.
Thanks in Advance,
Hariom.Hi Hari,
Check the below thread
populate drop down menu based on entry in another field
Cheerz
Ram -
How to set the Value in Dropdownbyindex
Hi Experts,
I am New to Webdynpro-ABAP.
I have one Dropdownbyindex field. I need to set the value from BAPI. how to set that values in Dropdown..
I need Basic step-by-step procedure.
Regards,
P.ManivannanHi,
1. First import the BAPI in to WD component using create->service call.
2.The BAPI import, export and Table parameters will be set in to the Component Controller context.Then drag this BAPI node to your view.
3.In the 'texts' property of DDbyindex bind the BAPI output node which will be the Table parameter of the BAPI.It could be under CHANGING node.
4.In WDDOINIT method just click the code wizard and enter the method name which you will give when importing the BAPI.Automatically the values from the BAPI will be loaded into your Dropdown when you run the application.
Regards,
Dinesh -
Setting the value of a java variable in javascript function
How can i set the value of a java variable in a javascript function?
<%
String fName = "";
%>
now i want to define a javascript function which can set the value of fName to the value it has been passed.
<script language="javascript">
function setJValue(val)
</script>
ThanksThe only way you could simulate this, would be call the same page inside the Javascript function, and send it the parameter that was passed. Then you would have your Java code retrieve this parameter by request.getParameter("value");, and set the variable accordingly.
-
Can I set the value of kernel paramaters less than default in Solaris 10?
Can I set the value of kernel paramaters less than default in Solaris 10? If specified less than default values for kernel parameters in /etc/system, system is getting default values for such as SHMMAX, SEMMSL, SEMOPM. Is the default kernel parameter values the minimum values in Solaris 10?
-YongYes, but not through /etc/system.
/etc/system is the old way to do it. As a backward compatibility, it will allow lines there to increase parameters but not decrease them. This is on the theory that many memory defaults were significantly increased, and older /etc/system setups were trying to increase small defaults, not decrease large ones).
Use prctl and set up a project.
Darren -
Setting the value of a single attribute for multiple line items
Hi all,
I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
TYPES: BEGIN OF t_kblp,
fipos TYPE kblp-fipos,
kostl TYPE kostl,
END OF t_kblp.
DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
wa_kblp LIKE LINE OF lt_kblp,
lt_bseg TYPE STANDARD TABLE OF bseg,
wa_bseg TYPE bseg.
DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
lo_api_controller TYPE REF TO if_wd_controller,
lo_message_manager TYPE REF TO if_wd_message_manager,
lo_nd_tbseg TYPE REF TO if_wd_context_node,
lo_el_tbseg TYPE REF TO if_wd_context_element,
lt_el_tbseg TYPE wdr_context_element_set,
lv_bseg TYPE bseg.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager.
lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lt_el_tbseg = lo_nd_tbseg->get_elements( ).
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
* get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
lo_el_tbseg->set_static_attributes(
EXPORTING static_attributes = wa_kblp ).
CLEAR: lv_bseg, wa_kblp.
ENDLOOP.
everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
lo_el_t_bseg->set_attribute(
name = `PROJK`
value = wa_kblp-pspnr ).
but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
Thanks,
Rajat Garg
Edited by: rajatg on Jun 24, 2011 5:09 PMHi Chris,
I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
move: wa_kblp-belnr to wa_bseg-kblnr,
wa_kblp-fipos to wa_bseg-fipos,
wa_kblp-kostl to wa_bseg-kostl,
wa_kblp-pspnr to wa_bseg-projk,
wa_kblp-geber to wa_bseg-geber,
wa_kblp-saknr to wa_bseg-saknr,
wa_kblp-fkber to wa_bseg-fkber,
wa_kblp-grant_nbr to wa_bseg-grant_nbr,
wa_kblp-gsber to wa_bseg-gsber,
lv_bseg-dmbtr to wa_bseg-dmbtr.
append wa_bseg to lt_bseg.
lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
get element via lead selection
lo_el_edit_property = lo_nd_edit_property->get_element( ).
lo_el_edit_property->set_attribute(
name = `EDIT_FIELD`
value = 'ABAP_TRUE' ).
lo_el_edit_property->set_attribute(
name = `EDIT_WBS`
value = 'ABAP_TRUE' ).
endif.
endloop.
o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
CALL METHOD lo_nd_t_bseg->bind_table
EXPORTING
new_items = lt_bseg.
Can you please see what I am doing it wrong here.... -
How do I set the value of a dynamic row text field
I have a repeated row form which contains a button and multiple text fields. There is a text field (Input Data Field) further up with some information I want to place in the table and multiple buttons that I want to read the value of and set to the table. I apologize there are multiple questions I have and I am using pseudocode to describe it.
Top form looks like
InputField
| ButtonX1 | ButtonY1 | DescriptionX1 (read only Text Field)
| ButtonXn | ButtonY1 | DescriptionXn
OutputRow looks like
| ButtonOutput | OutputField1 | OutputField2 | OutputField3 |
So I would like it to do
ButtonX1.click
OutputTable.OutputRow.addInstance(true) //this works - everything else I have questions on
OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue
Question 1
How do I address the location in each table to set a value
Question 2
How do I get the value of the description field in the same table and row as the button
I would like to say something to the effect of OutputTable.OutputRow[??].OutputField1.rawValue = this.parent.DescriptionX
OutputTable.OutputRow.OutputField2 = InputField.rawValue
Same question as above - how do I specify a dynamic row - is this the proper syntax for getting the value from the input field?
OutputTable.OutputRow.OutputField3 = this.ButtonLabel
Question 3
How can I get the value of the button's label to set in the field
There should be very many of these buttons and buttons will be added - I would prefer to set the value based on the button's label to make the value easier - not requiring changing the code
Question 4 - unrelated to those above.
Is it possible to build the first table
| ButtonX | ButtonY | Description |
from an XML File. I have seen examples of how to build if it is just data, but can the XML be pushed into a form with code to do the above actions?Each object in a form must have a unique name. I doing so it is not neccessarily the name but the path or SomExpression associated with that object that must be unique. In your case you have a Table.Row.object configuration. The Row is the part that is repeating so to give each object a unique name an instance number is placed on the repeating part. So objects in the 1st row woudl be Table.Row[0].object...objects in the second row woudl be Table.Row[1].object etc .....You can see this by adding a debug instruction on the Enter event of the description field. Put the code app.alert(this.somExpression) and when you enter the field you will see what the somExpression is. Do this for a few rows and you will see the pattern (don't forget to remove the debug code from the enter event). Now you know what you have to use to address the fields. If no instance is given it is assumed to be 0 ..that is why only the 1st row is being affected.
So now to answer your questions:
Question1: The square bracket notation is an issue for javascript (this is the notation for an array) so we have to use a different means of addressing the field to include the instance number. So to address the Description in the 3rd row we woudl use:
xfa.resolveNode("Table.Row[2].Description").rawValue = "This is my new description";
Note that the instance number is 2 for the 3rd row because the instance numbers are 0 based.
Question2. The resolveNode notation allows you to pass a string so you can also concatinate expressions to make the string. If you are writing code on a button in the same row you can get the instance that you are on by using the expression this.parent.index. The "this" portion refers to the current object (the button) and the parent.index gets you th eindex of the Buttons parent. If the button is embedded deeper in a hierarchy then you can continue to add parent indicators until you get back to the node that you want. So rewriting your expression from Q1 it woudl be:
xfa.resolveNode("Table.Row[" + this.parent.index + "].Description").rawValue = "This is my new description";
Question3: The buttons caption can be retrieved by using ButtonName.caption.value.text.value
Question4: When you say build from an XML file. What are you expecting to come from the XML file? The caption that goes on the button? Typically the XML file carries data (not to say that it cannot carry other things). Just need a bit of clarification on this one first.
Hope that helps
Paul -
HOW to set the value attribute of FORM INPUT data to a variable in a JSP
eg. Registration.jsp
The data is accessed from an hidden field called course
for example, if I have "Java programming" in the field course, and I use
an expression to access the value from the hidden field.
**My problem is that the data gets truncated to "Java" , I need "Java Programming"to display. The code looks like this
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<INPUT TYPE="text" SIZE=12 NAME="course"
VALUE=<%=getParameter("course") %>
IS there ANY OTHER WAY to set the value of VALUE to a variable?Instead of value=<%=request.getParameter("course")%>
Use double codes
value="<%=request.getParameter("course")%>" -
I need to set the Maximum so that the use can use the mouse to change the value of numericstepper (and not go over a certain number), but at the same time I have to allow the user to enter their value by typing in the text field. When the user enters a number greater than the Maximum, I disable the "Ok" button of the dialog and show a red warning(error message). The issue is that the user can hit "Enter" and numeric stepper would set the value to the Maximum and the dialog box would close and the rest of code would run. I want the numericstepper not to change the value and keep showing the warning even if the user hits the "Enter".
Note: Setting maxChar does not help since my maximum is 1000, and user might enter 5555
I would appreciate the help.Thanks for trying to help, But
The issue is that if I set the maximum value of stepper 1 greater than the max value that I want, then the user can select an invalid value(of myMax + 1) when he clicks on the UP arrow of the numeric stepper(which is not acceptable for what I am working on).
I need to preserve the users invalid number, while not letting the user to select an invalid number by clicking UP key.
I noticed that when the user enters a number greater than the Maximum, and then click on the down arrow, it would set the value to 1 less than the maximum. This is not acceptable either. -
Setting the value of a textbox from another page
Hi Everyone,
I have a multi paged application (multiple xib, multiple controllers)
In my selection view, the view that holds the UIViewPicker control, I need to populate the page that called the selector page...
I have the code to identify what page called the selector, and when the page is dismissed, I need to fill in the field from the calling page.
I have included the header of the calling view in my selector view, and now I need to be able to fill in a readonly textbox in the calling view....
Do I need to setup a property for each of the textboxes in the calling view, or can I populate them directly??
thanks
tonyalt-088 wrote:
I am sorry, but I am lost in this implementation....
How exactly do I tell the self.parentViewController what control will receive the new text value??
Ooooops!! I'm the one who needs to be sorry, Tony:
// from previous post
- (void)setTextInParent:(NSString* textValue) {
// assume that every possible parent controller has a "textbox" object
// which is a member of some class that has a writable 'text' property
[previousViewController setValue:textValue forKey:@"text"]; // <-- * Idiot alert *
Looks like another one of my senior moments. As you pointed out, we need the value of the 'textBox' property before we can set the value of the 'text' property.
To your question on how I am displaying the second view, it is called via
[self presentModelViewController:screen animated:YES]
from a button click event
Cool. That means we already have the address of vc1 in the 'parentViewController' ivar of vc2, so we don't need to add the 'previousViewController' ivar shown in my example.
So here's a corrected and maybe more relevant example--this one has been tested (Duh!), btw:
- (IBAction)done {
// get the currently selected string
NSInteger row = [pickerView selectedRowInComponent:0];
NSString *selection = [dataArray objectAtIndex:row];
NSLog(@"%s: selection=%@", _func_, selection);
// set text in textBox property of parent controller
[self.parentViewController setValue:selection forKeyPath:@"textBox.text"];
[self dismissModalViewControllerAnimated:YES];
I have tried to implement this code
[self.parentViewController setValue:21 forKey:@"test"];
but it is generating an error stating
passing argument 1 of 'setValue:forKey:' makes pointer from integer without a cast
Yeah, referring to the doc, [setValue:forKey:|http://developer.apple.com/iphone/library/documentation/Cocoa /Reference/Foundation/Protocols/NSKeyValueCodingProtocol/Reference/Reference.html#//appleref/occ/instm/NSObject/setValue:forKey:] wants an id type (pointer to an object of any Obj-C class) for the first arg. Since 21 is an int, i.e. a scalar value, the compiler doesn't like it (and the runtime system would like it even less).
However when you want to use KVC to set a scalar property, the methods are actually smart enough to extract an int if you provide a NSNumber object (see "Setting Attribute Values Using Key-Value Coding" under [Key-Value Coding Fundamentals|http://developer.apple.com/iphone/library/documentation/Cocoa/Conc eptual/KeyValueCoding/Concepts/BasicPrinciples.html#//apple_ref/doc/uid/20002170 ] in the Key-Value Coding Programming Guide). So if 'test' is an int ivar of the parent controller, something like this should work:
[self.parentViewController setValue:[NSNumber numberWithInt:21] forKey:@"test"];
Does that cover your questions? Sorry again for the bad code. Most of the examples I post are pasted directly from working, tested code, and I usually add a disclaimer if it's just something I keyed into the forum. But when I"m having a senior moment all bets are off.
- Ray -
Can I set the value of a list binding in my managed bean?
Dear All,
This is just an exercise for me and I just wanted to experiment on the bindings of ADF for me to understand it further.
I wanted to create a custom Model Driven LOV with my data control listed below
Countries
-CountryId
-CountryName..but I wanted to display the label similar to this
1 - USA
2 - England
n - France..so I thought of manipulating the select items in a bean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>..and the code similar to this
public class MyBean{
public List<SelectItem> getCountries(){
//countryMap points to accessing the iterator binding
//BindingsHelper is a utility class that sets the value
for(...){
SelectItem item = new SelectItem();
item.setLabel(countryMap.get("CountryId") + " - " + countryMap.get("CountryName"));
item.setValue(countryMap.get("CountryId"));
list.add(item);
//set the item to the first row
BindingsHelper.setExpressionValue("#{bindings.Countries.inputValue}",
list.get(0).getValue());
return list;
}...on the last part I wanted to set the value to the first item but I am encountering numberformatexception when setting the list binding.
I know I can do this declaratively also by removing the unselected item but as I have said I am experimenting on the bindings.
Is this not possible?
Thanks.
JDev 11G PS5Hi ,
I understand that , you want to show select one choice (dropdown) with label (countyid - country name) and value is (countryid).
and these informnation is coming from ADf Model ( may be a VO).
in the UI page you used this list is coming from MyBean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>
so ,
The Managed Bean code should be ,
private List<SelectItem> countries;
///setter method
public void setCountries(List<SelectItem> countries) {
this.countries= countries;
// getter method
public List<SelectItem> getQuoteStatusList() {
quoteStatusList =
selectItemsForIterator("countriesVOIterator",
"countryId", "countryName");
return quoteStatusList;
public static List<SelectItem> selectItemsForIterator(String iteratorName, String valueAttrName, String displayAttrName) {
return selectItemsForIterator(findIterator(iteratorName), valueAttrName, displayAttrName);
public static DCIteratorBinding findIterator(String name) {
DCIteratorBinding iter = getDCBindingContainer().findIteratorBinding(name);
if (iter == null) {
throw new RuntimeException("Iterator '" + name + "' not found");
return iter;
public static List<SelectItem> selectItemsForIterator(DCIteratorBinding iter, String valueAttrName, String displayAttrName) {
List<SelectItem> selectItems = new ArrayList<SelectItem>();
for (Row r : iter.getAllRowsInRange()) {
string labelValue = (String)r.getAttribute(valueAttrName) +"-"+ (String)r.getAttribute(displayAttrName);
selectItems.add(new SelectItem(r.getAttribute(valueAttrName),labelValue ));
return selectItems;
this will give you what you except in the ui
when you try to get the value form that seclecOneChoice value in MyBean what user selects , you can simply get the value of this selectOneChoice. -
Hi,
I have a basic scope question . I have two .ksh scripts. One calls the other.
I have a variable I define in script_one.ksh called var1.
I set it equal to 1. so export var1=1
I then call script_two,ksh from script_one.ksh. In script_two.ksh I set the value of var1 to 2 . so var1=2.
I return to script_one.ksh and echo out var1 and it still is equal to 1.
How can I change the value of var1 in script_two.ksh to 2 and have that change reflected in script_one.ksh when I echo var1 out after returning from script_two.ksh.
I've remember seeing this I just can't remember how to do it.
Thanks in advance.Unfortunately Unix or Linux does not have a concept of dynamic system kernel or global variables.
Environment variables can be exported from a parent to a child processes, similar to copying, but a child process cannot change the shell environment of its parent process.
However, there are a few ways you could use: You can source execute the scripts, using the Bash source command or by typing . space filename. When source executing a script, the content of the script are run in the current shell, similar to typing the commands at the command prompt.
Use shell functions instead of forking shell scripts.
Store the output of a script into a variable. For instance:
#test1.sh
var=goodbye
echo $var
#test2.sh
var=hello
echo $var
var=`./test1.sh`
echo $var
$ ./test2.sh
hello
goodbye
Maybe you are looking for
-
Goods receipt quantity more than po quantity -units
Hi Purchase order is created for 100 units But Good receipt and Invoice receipt is 125 units I was unable to post the goods receipt of 125 units against the PO order of 100 units Can you let me know how do i post the good receipt of 125 units and let
-
How to create Folder and subFolder using web services
Hi, Today I've been working with some Share Point develompment but the truth is that I can't just get it. Can any body help me with some easy links to start Share Point Development? Here is wath I'm trying: I need to create a new folder (lets say Fol
-
Need to disable the touchpad on a Pavilion dv4150US laptop with Win-XP SP2
Trying to disable the Synaptics touchpad. Contrary to adviCe I have seen on the Internet, there is no dialog option for the toudhpad to select disable in my system. The Windows device manager doesn't even list a touchpad device. The synaptics driv
-
Email associated with another icloud account
my email is verified with another icloud account. How can I find that account and cancel it.
-
Custom ClassLoader - trying to use different version of SNMP library than WebLogic Server 8.1 uses
Problem: my J2EE ear file uses the AdventNet third-party library to do SNMP work. WebLogic Server 8.1 also uses this AdventNet third-party library to do its own SNMP work. The problem is the version used by WebLogic 8.1 is older than the version I us