Setting the working place

I don't understand what I do wrong, when the working place changes again and again, so I hope that someone can help me.
My actual wp looks like the inserted picture, and this is almost what I want, but I also want a preview in the right side + its metadata beneath, but I have tried and tried, so please....
And when I have made it as I want it, how can I save it as MY wp, which I can return to, when I need it?
Sicerely

Found out how to make it look like I want it, but how can I be sure to find it again?

Similar Messages

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to set the working directory for reports in linux

    Hi All,
    Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
    working directory. How can I do this?
    Thanks in advance
    Arif

    Hi,
    your rep_srv.conf should look like something like
    +<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
    +<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
    +<server version="10.1.2.0.2">+
    +<!--Please do not change the id for reports engine.-->+
    +<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->+
    +<cache class="oracle.reports.cache.RWCache">+
    +<property name="cacheSize" value="50"/>+
    +<!--property name="cacheDir" value="your cache directory"-->+
    +<!--property name="maxCacheFileNumber" value="max number of cache files"-->+
    +<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"-->+
    +</cache>+
    +<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
    +<!--property name="sourceDir" value="your reports source directory"/-->+
    +<!--property name="tempDir" value="your reports temp directory"/-->+
    +<!--property name="keepConnection" value="yes"/-->+
    +</engine>+
    +...+
    some more definitions
    +..+
    +<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->+
    +<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
    +<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
    +<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
    *<environment id="APP1">*
    *+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
    *+</environment>+*
    *+<environment id="APP2">+*
    *+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
    +</environment>+
    +</server>+
    The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
    If you call a report from Forms, then you have to code something like
    ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
    Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
    Hope that helps.
    Volker

  • Introducing InCopy in the work place - proposal editing/additions

    I have been using InDesign for a few years but I am brand new to InCopy.  It seems like a fairly simple application but I need to learn how to use it quickly to train our staff on it soon.  We are going to be doing our company proposals in ID and use IC to have others put thier info/edits in there.  Do you have to assign sections in ID  to a particular person to edit in IC or can they view the entire ID proposal in IC and pick and add thier portions.

    Or, to cut to the chase, no you do not have to assign a particular section to each editor. He/they can open the full ID file and work on whatever sections they need to.
    By the way the CS4 version of that CS3 whitepaper (I'm the author of both) is on my blog:
    http://incopysecrets.com/incopy-cs4-hands-on-guide.php
    ... but the CS3 version actually has a more extensive explanation of how the workflow works. The CS4 whitepaper has a short version, then jumps into the new features in CS4.
    AM

  • Apple TV use in the work place

    Can Apple Tv be used by multiple users with iPhones and iPads for mirroring and AirPlay?

    Yes
    If you are using it in the workplace check you don't have an enterprise network.

  • Work place required to execute the work

    Hi, can we able to map the work place required to execute certain work in sap? we want to calculate the cost of the product by multiplying the area with the standard rate of that area. please suggest.

    Hi Yadavji,
    Yes, we can certainly map the work place required to execute certain work in sap.
    This workplace is nothing but it is Workcenter. Use CR01 t.code to create Work center in SAP.
    Yes, we also calculate the cost of the product by multiplying the area with the standard rate of that area.
    Since area is critical to business scenario, you can area as one of standard parameter in Standard Value key. Can make an activity type for this and maintain the rates in KP26. In that way, you can calculate the cost also.
    Thanks,
    Srini

  • Email Sales order link from SAP Work Place

    Dear SAP Gurus,
    Well guys i have to mail the sales order link through the work place but its not working for the sales order. but its working for delivery order and billing document...so i want to know that why its not working?
    Regards,
    Mohsin

    Dear All,
    Can u please help me on this situation? I will be very thankful to u....
    Regards,
    Mohsin

  • How to set Field "Work" to 0 using PSI

    Dear all,
    I'm creating Tasks in MS Project using PSI.
    This works fine.
    I've a request to set the "Work" Property of the Task to "0h".
    Maybe somebody of you know how to do this. I thought that the property
    TASK_WORK is for that but when I set this property to 0 there is no Action.
    Thanks
    bernhard

    Solved
    Set the Property ASSN_WORK to 0 in the Object AssignmentRow.
    BR
    Bernhard

  • Terminating the work item

    Hi,
    I have an requirement where in i need to terminate the workitem after a user decision step. The termination should happen when the user decision is a 'Reject'.
    The termination needs to happen immediately after the rejection happens without any deadline monitoring.
    Can anyone please let me know how to set the work item to obsolete when the user decision is a reject?
    Many thanks,
    Raghav.

    My bad....I was a bit hasty in answering that!!
    Did you try activating the 'Processing obsolete' in the outcomes tab of the decision step? You should do that, and leave the path empty if you don't have any logic to add.
    Let me know if this works.
    -Krisnan
    Edited by: Krisnan Kumar on Jul 29, 2008 9:24 PM

  • How do I set the default file path for the Place command?

    I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
    IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
    I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
    Thank you.

    Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
    You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
    This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

  • How do I set the default Object Placement in new pages?

    I often drag and drop images to pages, but the default is that these images do not move with the text.
    How do I change the default for this setting? This always worked with the old pages 09...
    I've tried a lot of different approaches including creating a new template or applying a new style to the objects. But it seems that the style does not affect the object placement settings at all. And the template didn't work either.
    Has anybody already figured out how to do this?
    Many thanks in advance!
    xifle

    Hello xifle, I have the same issue with pages. Indeed, it is time consuming to have to format the placement of each image I insert so that text wraps around it. Sometimes, I would need the image to float so that I can position it more effectively. Finally, wouldn't it be nice to have screen shots inserted into a pages doc scale down to a pred-determined size. We are surely hundreds of users needing this same feature. Great streamlining, but an overall weak version of Pages at the moment. Regards, Emmanuel in Switzerland

  • TS1424 I am trying to purchase something from app store and it is asking me to answer 2 security questions that I never set up/answered in the first place? Has this happened to anyone else? How do i fix this or reset these security questions?

    I am trying to purchase app from app store and its asking me to answer my security questions which I dont know because I never set them up in the first place! How do i get passef this or change it to reset my own security questions?? 

    Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
    (88522)

  • Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

    Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
    running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
    and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
    broke this application. Help!!

    Hi,
    It seems there is nothing to do with IE mode.
    Please make sure your link still can be accessed.
    The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
    For more infromation,please check link below:
    http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Getting the error message while logging through work place after upgrade

    Hi,
    C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
    Application not found
    Getting the error message while logging through work place.
    It is urgent
    Thanks,
    Sri.

    After upgrading the Batch file it worked fine.
    Thanks,
    Sri.

  • "Set the Desktop Picture" command does not work in certain instances

    I've decided to take a try at using automator. Anyways I've created a very simple workflow.
    Get Specified Finder Items (points to an image file)
    Set the Desktop Picture
    Now this usually works when the desktop is set statically to a specified image. But when I set the desktop to change the picture periodically, the automator action fails to change the picture to the specified image, when executed.
    Is this a bug? Is there any workaround for this?

    Your workflow actually is changing the static desktop picture, it's merely failing to then switch off the "Change picture" feature.
    The "Change picture" feature has a somewhat misleading name in that it's not actually changing your static desktop picture at all. Your static desktop picture remains in place as a new dynamic picture layer is continually drawn and redrawn directly on top of it.
    I don't see any way of testing for or turning off the desktop slideshow automatically, short of writing a GUI AppleScript that opens System Preferences and clicks through to the relevant toggle setting. If you file feedback with Apple they might take a look at it.
    http://apple.com/feedback/

Maybe you are looking for