Setting Time Defaults in the Calendar

Hello,
I am using two calendars. One for 'Start_Date' and one for 'End_Date' that also are used to select times.
In 90% of cases the Start_Date time will be set to 8:30am and the End_Date time will be set to 5.00pm
Is there a way to set these two times as default as they currently are set to the current time?
Kind Regards,
Steve Welch

Settings > Date & Time > 24-hour time -Off.

Similar Messages

Set as default value the Item Category in the Maintenance Order

Hello everyone,
We are trying to find a user exit in order to set as default value the item category in the Maintenance Order once the Material has been introduced (Tag Components).
SAP Customizing let the user set the Item Category automatically per Material Type, but we need to set different Item Categories to materials belonging to the same material type.
We would really appreciate any help relating this issue.
Thank you very much,
Víctor Liedo

Dear Paul,
Thank you very much for your response.
I had already tried customizing mentioned by Pithan, but it did not work because we need to set different Item Categories for Materials with same Material Type.
We have been searching for exits which may let us set Item Category in the Maintenance Order, but it does not seem to be possible.
What you say about adding some custom validation through user exit, not to set item category as default value, but to check if the one entered is valid, sounds the best way of achieving our commitments.
I have tried to look for CNEX0037 & CNEX0038, by using transactions SE37 and SE38, search for programs and functions modules, but it did not work. Could you please tell us what kind of objects are?
Thank you very much in advance.
Víctor Liedo

How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

I use SpellCatcher.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to set time out in the abap program?

Hi,
I want to set the execution time in the IN_UPDATE block of a BADI, could you tell me how to code that?
When the specified execution time reaches, and the badi is still running, then pop up a window and tell the end user the time out message.
Does SAP have any function regarding this? Thanks in advance.

You can have the INPUT be a number of seconds, then calculate the max endtime = SY-UZEIT + INPUT. Have checks throughout the program that returns an error as OUTPUT if exittime >= SY-UZEIT(current time).
There may be an easier way but this is all I can think of as a user set timeout option.

ICloud Outlook add-in causes Outlook to hang for 30-120 seconds each time I enter the Calendar.

The iCloud add-in for Outlook seems to be causing some issues with my Outlook calendar: each time I go from the Mail tab to the Calendars tab, Outlook freezes for a minute or two and then resumes functioning.
The problem is definitely with the iCloud add-in itself: if I disable the add-in, my iCloud calendars still appear (but do not sync), and Outlook works fine. The freeze does not seem to happen the first time I go into Calendar after starting Outlook, but every subsequent time it does happen.
I am using Outlook 2010 (32-bit) on Windows 7 (64-bit). I do not know and haven't been able to figure out how to tell if I'm running 32 or 64 bit Apple software on this computer.
I would appreciate any help, and particularly any thoughts on what the iCloud add-in is actually doing at the moment you go into Calendar view that might be causing problems. Does it sync at that time (and apparently in a poorly designed way)? Or is it just some rendering or other similar issue?

The sync can be very long, nbut only when you sign in from the Control panel. Once you're in Outlook, I don't think you sync that much.
I have the same issue using my old PC. Maybe you should check your hard drive, your memory usage and CPU usage. I fixed it by a new laptop, last year. Usually, this is a sign that you're short on memory and you're using the Windows page system memory file. So, your CPU might come short, your hard drive might be too slow or you don't have enough memory.. Otherwise, your hard drive may be too slow and very fragmented, reqyuiing Windows to spin a lot and read bits of files stored everywhere. The solution would be to defragment your hard drive. or worse.. it's a slow hard drive or showing sign of fatigue.
I'll go with defragmenting the hard drive first, then, the CPU and memory bump.

Setting a default for the Table Headings

Hi all,
the users are asking me if it's possible to set in the Table View of Answer the Display Column & Table Headings = As Table.Column as default. This option can be found in the Table View Properties and you can set the value just for the current request...
Is there a way to set a default value for this option for all the requests?
Thanks in advance.
Nazza

it's stupid, but it works in 9 & 10. probably v8 also, but I can't remember that far back. and it might not work in future releases.
add this to the top of your script:
set termout off echo off feed off pages 0 timing off verify off
rem Determine if parameter 1 is defined. If not, default to "XXX"
spool temp1.sql
select 'select decode(instr(''-' from dual;
def 1
select ''',''symbol 1 is UNDEFINED''||chr(10)),0,''rem fine'',''define 1 = XXX'') from dual;' from dual;
spool off
spool temp2.sql
@temp1
spool off
@temp2
set termout on
put your code here
and of course, it leaves two files (temp1 and temp2) in the current directory. so, you can add o/s dependent delete statements via a host command. or just leave them. you're call.
Message was edited by:
shoblock
forgot the "set" commands at the top
AND...
set termout back on at the end (along with echo or whatever else you want).
and I changed from defaulting &1 to a value of "1", to a value of "XXX". should make it easier to follow (I hope).
and finally, thanks to Ron who helped me figure this one out (many years ago)

I'm suddenly having issues with my calendar...I will input a time and on the calendar it will show up an hour early ... If I click on the event it will show the correct time but at first glance it's showing one hour early! Help!

Anyone have suggestions?

Go to:
Settings > General > Date & Time > Time Zone
Check if you have your correct zone selected. Also, do you sync your calendars with any Mac or PC or Web service (like Google calendar)? If so, check if all your time zone settings are the same.
Cheers,
JP

I have my computer connected to an external hard drive, almost all of the time. Are the calendar and the contacts backed up when everything else is?

If my calendar and address are backed up to the "time machine," how can I retrieve them. When I look at what is on the time machine, I'm seeing the folders that are on my desktop, but that's all.

Close iTunes. Click the icon to start it, then press and hold down the left shift key. Keep holding until asked to choose or create a library. Choose the iTunes folder on your external drive. That should bring back all your playlists, ratings, play counts etc. You may have to settle for removing and reloading the media onto the device again. That's not too bad, but what you don't want to have happen is your apps being removed and reloaded as then you can lose settings and data. If that looks likely backup and then restore the device rather than sync it.
If for some reason rebuilding the library the way you did has moved files around then the restored library may have trouble finding things. If so post back and I'll explain what to do...
tt2

Is there a feature in Adobe Acrobat that allows me to create a PDF that has a 'self destruct' capability? We have a situation where we need to allow people to download PDF files, but after a set time (48 hours), the file can't be opened and read (e.g., s

Can Acrobat create PDF files that once downloaded - can't be opened after some preset time (48 hours)?

Hi Edward lkeda,
I am not very sure of that however as per my knowledge , you can use Adobe send service and provide public link to your users and then after 48 hrs you can delete the file from server and make File-link inaccessible.
Hope that helps,
Please revert back for any further query. I will try my best to help you with your problem.
Regards,
Rahul Tyagi

When using email via iCloud, when I try to reply to emails, the cursor defaults to the bottom of the chain. How can it be set to default to the top?

PDF reader will not open certain documents. I have to download to desktop and open PDF documents there. No similar problem if using Safari. Already loaded PDF plugin for Firefox. Any guesses?

Also, This is the message I receive when the page doesn't open:
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Setting a particular value as default for the Grouping Range at BP Creation

Hi,
I am trying to set certain default for the Grouping Range when I create a new Bp using Tcode BP. For this i have changed the PBC fucntion for the view BUP020 ( TCode : BUS3). The Z function module attached is Z_FBSBP_SET_DEFAULT_GROUPING
FUNCTION z_fbsbp_set_default_grouping.
""Local interface:
*" IMPORTING
*"     REFERENCE(IV_ACTION) LIKE BUS000FLDS-CHAR1
*"     REFERENCE(IV_SICHT) TYPE BU_SICHT
DATA: lv_bu_group TYPE bu_group VALUE 'GR01'.
Set the Grouping Range with a default value for all roles, each time
when transaction BP is called
SET PARAMETER ID 'BPP' FIELD lv_bu_group.
Call the standard PBC fucntion module for BP Creation
CALL FUNCTION 'BUP_BUPA_PBC_MISC'
    EXPORTING
      i_action = iv_action
      i_sicht = iv_sicht.
ENDFUNCTION.
As per my notion this fucntion module should get triggered once I open the transaction BP and try to create a new BP, but such a thing is not happening.
Can someone help me in this?
Regards
Priyanka

Yes we did,
But its not a very good solution though it serves the purpose.
See what I did was:
1. Read the authorization object's values for the logged on user using SUSR_USER_AUTH_FOR_OBJ_GET. From here I retrieve the Grouping Range required for the user.
2. Keep this value in a variable say gv_grouping_range.
3. SET PARAMETER ID 'BPP' FIELD gv_grouping_range.
4. CALL TRANSACTION 'BP'.
The four steps above have been enclosed in a report which has been attached to a new transaction code. We from now on allow user an access to this new transaction and not the standard BP transaction(which of course calls for a major change in roles).
Secondly, the first three steps which have been enclosed in a subroutine set_default_grouping are also called from the BDT view BUP050, where the PBO has been changed to ZBUP_BUPA_PBO_MISC
FUNCTION zbup_bupa_pbo_misc .
""Local interface:
*" IMPORTING
*"     VALUE(I_SICHT) TYPE BU_SICHT
PERFORM get_set_def_grouping IN PROGRAM zrpbsbp_create_businesspartner.
CALL FUNCTION 'BUP_BUPA_PBO_MISC'
    EXPORTING
      i_sicht = i_sicht.
ENDFUNCTION.
Hope this helps.
Regards
Priyanka

Incorrect time in Live when calendar event accepted on iphone

When accepting a calendar entry on the iPhone, scheduled for 10:00 PST, it appears in the calendar at the correct time but when the calendar syncs back to Live (Hotmail Calendar) it shows up in live at 2AM, thus an 9 hour difference.
Me time zone support on the iphone is set for Los Angeles and my Live calendar preferences are set to Pacific Time.
Here is how the calendar event got on the phone. From work, I scheduled a meeting with my home e-mail address using Lotus Notes at work. The invitation arrived on my iPhone and I accepted it into my personal Live calendar. (I have two Live calendars, my personal and the US Holidays that sync to the iphone)
On the iPhone it shows the correct time but on Live it shows 9 hours earlier!
Any suggestions on how to solve this problem?
Thanks

Barry Porter1 wrote:
look in mail contacts and calendars on phone settings, and be sure your time zone support is your correct time zone.
Barry,
As I indicated above, this is set and is correct, but for some reason things dont get scheduled on the default time zones.
"My time zone support on the iphone is set for Los Angeles and my Live calendar preferences are set to Pacific Time."

Setting a default date value for input controls

Hi All,
I have created a webi report that shows - among other things - the activity between 2 dates. I have created 2 input controls where the user can select the start and end dates from a calendar for this.
The displayed data is restricted by a date variable which 'unfiltered' contains 1 month of data.
'out of the box' I can set these input controls and all works fine, but each time I open the report the same values that I set last time are set in the input controls. I want to have these default to being between today and 7 days ago with the user then able to move away from this action, rather than the 'window of interest' slowly slipping into the past.
I have looked at the forum posting Re: Default Input Control Values in WebI doc on Open which describes setting a default on the objects in the report filter pane, but this does not appear to be possible as these are 'grayed out' and i need both the input controls to run from a single object.
Does anyone have any ideas how this might be achieved?
Thanks in advance
John

Hi,
Sorry, I've obviously not explained myself very well. Please let me try to elaborate...
The report I am writting is to function as a dashboard (yes, i know - Xcelcius/Dashboard Designer - don't ask!) but asking the user to enter a prompt for the date range is not an option here. My only options for this are effectively the input controls or the report filters. I want to be able to achieve the effect of entering =CurrentDate() in the 'default value box in the same way that I would if writting a Reporting Services report. However the WebI controls do not accept expressions for this.
So...
I have one date object with a months worth of dates in it.
I have two input controls associated with this date object to allow the user to select a narrowed date range from this month of data.
I need one of these to default to 'today' and the other to default to '7 days ago' (I can do the calculations to get both dates, the bit I cannot get past is applying these dates as defaults)
can anyone help me with step 3 (in bold) above?
John

Is anyone using the Calendar Server to send external invites?

Is anyone using the Calendar Server to send external invites?
We have a Mountain Lion server running DNS, Open Directory, File Sharing and VPN. We have recently stood up the Calendar server and it is working very well. Internal invites work fine and are instantaneous to computer, iPhone, iPad. We have the ports working so that calendar items created outside the network work fine as well. Only problem is we cannot invite anyone with an external e-mail address. Each time we do the Calendar Error Log populates with:
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 5
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 4
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 3
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 2
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 1
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] [twistedcaldav.mail.MailHandler#error] Mail gateway failed to send message <[email protected]> from [email protected] to mailto:[email protected] (Reason: Failure with multiple causes.)
We have set up an internal e-mail address. I have confined that it works fine. I have tried more than one internal account. I have also verified the settings through the command line by typing "sudo serveradmin settings calendar" The iMIP sending and receiving information is correct. There is no authentication type setting listed in the command line output even though there's a place to choose it in the Enable invitations by email - Edit button on the third screen. No matter what I choose it goes back to "login" and still doesn't work.
The command line settings mention a port number 62310 as being the MailGatewayPort but opening that port on the network's firewall makes no difference. As I said external set up works fine from Mac/iPhone/iPad and push notification works fine as well.
Is anyone using this functionality?

I'm sorry. I forgot to add Mail to the list of services. I AM using mail on that server. Here's the iMIP portion of my settings output from Terminal.
calendar:Scheduling:iMIP:Sending:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Sending:UseSSL = yes
calendar:Scheduling:iMIP:Sending:Username = "calendarserver"
calendar:Scheduling:iMIP:Sending:Address = "[email protected]"
calendar:Scheduling:iMIP:Sending:Password = "password"
calendar:Scheduling:iMIP:Sending:Port = 465
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "calendarserver"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
So Add mail to the services being used. Since Calendar is running on the mail server one would assume that it could communicate with it fairly easily.

Setting Time Defaults in the Calendar

Similar Messages

Maybe you are looking for