Setting tomcat cluster with F5 device, not working

Hi. I have 2 servers each with tomcat 5.0.28 on them, I am trying to set up a cluster but when i do as the instructions say in tomcat clustering references, the server which has the apache on it after i change the server.xml files you can't log onto the browser gives error 503 couldn't connect on port 80.
I have left the server.xml files the same on each server as i thought it should be fine if 2 tomcats on different servers. Except i changed the mcastAddress to the same on both which is the IP of the main server. Is this right?
So i am not sure if there is something preventing it from working on the F5 device? I have been at this co. for 3 months and nobody seems to know anything about this so i have to figure it all out myself.
Please if anyone knows anything or why this might not be working please help!
Thanks!

I have WPA-Personal setup on my Linksys WRT54GS router and enter password normally when connecting to home network. It works just like connecting any pc to my home network.
And it is really fast. Even walked out in the back yard and signal was still strong.
thanks

Similar Messages

  • In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • Dual-Boot; Restart and boot other o/s USB devices not working

    I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
    Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
    After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
    System no hang or occur any error/BSOD message.All startup programs run as normal.
    I tried to re-plug usb devices but notting happens...  Still not working
    But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
    After power up PC and boot with windows 7 all usb devices works normaly.
    I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
    I'm sure other H/W is OK, but I thnik this mobo have a fault.

    Thank you for reply.My PC system specs:
    CPU:    Intel Pentium G3258 3.2ghz
    Board:    MSI Z97-G43 /Bios: Ver. V17.7
    MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
    VGA:    Sapphire AMD Redeon HD6670
    CASE:    Zalman z3 plus white (5x 120mm fan)
    PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
    HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
    COOLER:    Akasa 92mm PWM Blue Led
    OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
    O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
    All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
    Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
    I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
    I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
    Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
    I think msi z97-g43 mainbıoard have a problem.

  • I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

    I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

    Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

    iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
    Computers are not airplay compatible unless you have downloaded an app to make them so.
    User to user forum, so I don't care if you switch to android or any other threats you make.

  • My laptop biometric device not working.

    HI,
    I am facing one problem with my hp pavilion dv6 6160se biometric device not working and i also lost my recovery deta. kindly provide me the solution. 
    and my system also very slow how can i make it fast.
    m. asif 

    Hi there @Sweeto684 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that your fingerprint reader is not working and that your system is running very slow, but please clarify what you mean by saying you lost the recovery data. Are you referring to the factory recovery image stored on your system, or are you meaning something else?
    I am happy to help you with all of this, but need to know more before I can make some useful recommendations. I want to avoid having you do something that could cause a problem with something else, until I know what problem really is.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • BPM_DATA_COLLECTION fails with (Output device "" not known) error

    Hi all,
    I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system  failing with 'Output device "" not known error.  Since it is collecting data for Solution Manager system why does is it trying to find an output device.
    It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
    Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2.  _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
    Thank you very much for your help!

    I am experiencing this same issue in our ECC 6.0 system.  We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system.  These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
    When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
    Does anyone know if it ok to change the user for this job? Should it be run by DDIC?  I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

  • FIND with MATCH OFFSET not working

    Hi,
    I have a statement:
    FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
    this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
    (i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
    *In this case off2 = .
    Value of sy-subrc is 0 after this statement is executed
    Can some one please point out what I am doing wrong.
    Thank you,
    CD
    Edited by: CSD . on Sep 26, 2008 9:53 PM

    >FIND with MATCH OFFSET not working  
    Most unlikely.  More likely is that it isn't doing what you think it should be doing.  Or you're using it incorrectly!
    I can't really follow what your problem is.  I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
    Can you be a little clearer in what the issue is?
    DATA: off2 TYPE i.
    FIND '/' IN 'this string /' MATCH OFFSET off2.
    WRITE: / sy-subrc, off2.
    This little program returns 0 and 12 
    matt

  • Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

    hi..
    i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

    See this: http://support.apple.com/kb/TS1559
    If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

Maybe you are looking for