Setting tracks for a dj set recorded in logic

Hi im a DJ and I record my sets in logic. My problem I dont know how to set track markers in my mix so when I burn it and play it on a cd player my mix is one long track. How would I go about putting the correct markers in my mix so when you play it you can navigate through it track 1,2,3 etc? Can anyone please help me with this problem because its making my mix tapes come out very unprofessional.

use Waveburner
http://documentation.apple.com/en/waveburner/usermanual/#chapter=1%26section=0
A

Similar Messages

Set default audio track for playback in Source monitor

So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
Thanks!

I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

Setting track for a captivate course

Does anyone know if you can set up "tracks" for a captivate course in the LMS.
I have a course with a lesson that is only applicable to certain group of learners and we dont want the rest of the company to view that information.
Our LMS does have the capability to set up tracks for courses created directly in the LMS system, but I originally created the course using captivate instead.
Any advice is greatly appreciated.

If it is critical that one role does NOT see what the other role should see (e.g. for security reasons) then you need to have three separate versions of the course and set up your LMS to determine which role the person belongs to so that the only choice they get is the one appropriate for them. Most LMSs allow you to configure role-based learning this way. You add people to the roles set up in the LMS and that controls the learning options they see.
Doing what I suggested in Captivate is really just a way to have slightly personalised content for different roles inside the same project file. But the downside is that when you get to the quiz, everyone has to do the same questions, otherwise your quiz score can never be 100%. Then you'd need to resort to using a target for points scored instead of a percentage out of 100.

T5SSCXSSSERVICES - Set Data Tracking for Individual Self-Services

Hi,
We have a requirement for BI Report to fetch data from table :T5SSCXSSSERVICES
The above table could be filled with data when we perform any activities in ESS and MSS.
I wanted to know what are all required configuration to get data in to the table T5SSCXSSSERVICES
I understand below mentioned configuration are required:
IMG Node 1: Activate Data Tracking for All Self-Services
IMG Node2: Set Data Tracking for Individual Self-Services
Is it required to activate Business FunctionS et - HR Administartive Servcices?
Guide me with more inputs,
Regards
Ramanathan

Hi Ramanathan,
I am facing the same doubt now, are you able to share your experience on how to populate T5SSCXSSSERVICES ? Appreciate that, and thank you in advance.
Regards
Kir Chern

Why can't I enable an audio track for recording? (It won't let me)

I want to record VO but PP won't let me...
On Mac OS X 10.10 Yosemite in System Preferences:
• Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
• Output is set to Headphone port
In Premiere Pro CC Audio Hardware Preferences:
• ASIO Hardware is set to "System Default Input/Output"
• I have also tried "C-Media USB Headphone Set but this, too, doesn't work
• With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
     • "Built-in Output: Headphones 1
     • "Built-in Output: Headphones 2
     • "C-Media USB Headphone Set: Front Left
     • "C-Media USB Headphone Set: Front Right
all four of these have a couple of square icons to the right.
In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

is I learn still around -? That was VERY HANDY!

Hardware setup advice needed for 2 track 'better than demo' sound recording

I've enjoyed browsing the forums and seeing of the good help that people get here. Hopefully, I'll be next.
I have an accoustic guitar (Taylor 314-CE, Expression System) with onboard pre-amp, cable is 1/4 from guitar to XLR
I have a dynamic mic, with XLR to 1/4 cable
Key issues so far:
(1) lack of a mic pre-amp
Right now I've got a unidirectional dynamic mic from RadioShack that was a gift. I think it cost $50, so I know it wasn't the cheapest one in the store. Of course using it with GB and line in, you have to practically swallow the mic and turn the levels up to get anything. So I don't really know enough about it's quality yet.
(2) difficulty recording guitar
It seems like I either get clipping or not enough input, so I end up with lots of noise relative to a quiet guitar track. To avoid clipping, I have the pre-amp on the guitar set way down, and the track volume way down too. Just doesn't seem that great.
(3) one track a time
So I need a system that will allow me to record two tracks at the same time, mic and guitar (not mic'd), and I am looking for 'better than demo' sound.
Have I got this right:
Behringer UB502 ($30) would work? - since my mic is dynamic, I don't need phantom power (available on UB802 ($40)). Will I need a new mic cable, XLR to XLR, or can I use the XLR to 1/4 cable? Would an XLR to XLR be better?
How is the Behringer connected to iMac? USB? Firewire? I didn't see anything included - Do I need to purchase cabling separately?
Is the sound quality going to be good enough for Home CD quality recording? If not, to what do I have to step up to? Firepod at $600? Its track count is overkill for me, but I need good sound, too, so maybe... Or is there something in between that offers great sound and just a few inputs?
How much of a difference would a condenser mic be? Am I right that with that type of mic, I need phantom power on the (mixer / interface - which is it?) Have seen recommendations for MXL 990 ($60) and Rode NT1000 ($300).
That's about it. Hope you can help.

Nice guitar. Radio Shack mic were made by Shure not sure if they still are. A cheap mixer will just plug into the line in jack just a matter of getting the right plugs an cables. I would use a xlr cable pretty cheap from online music stores. You may want to consider a usb interface they tend to be a little cheaper then firewire check M-Audio. Condenser mic are great but they pick up everything and you should be fine with you mic you have and the fine onboard system taylor uses.

Can't Arm Track for Recording

I can't Arm any track for recording. I've closed the program, rebooted, etc. with no luck. When I first open Audition, with no session loaded, I can Arm a track. But when I load my session I can't Arm any track. I've checked Audio Hardware Setup and all seems OK. Anyone know what might be happening? Thanks.

I found the problem. Each track had the 'Input' button (right below the volume and pan buttons) set to none. How this happened I'm not sure. Probably when I opened another program that took over ASIO and changed AA3.
I found the answer at http://forums.digitalmedianet.com/cgi-bin/readwholethread.fcgi?forum=adobe_audition&post= 060922041404.htm&toppostid=425
They were discussing another problem but was able to get my answer from the topic they were discussing.

HT1006 why when hit the record button I lose the song on my music track for a second or so then the sound returns. I would like to be able to record on the fly while still hearing my accompanyment

guys am new to garageband. I am trying drag a non vocal track into my project, open another vocal track and and record my voice with a mic via my interface. When i hit play I hear the non vocal track, but when I hit record everything stops for a second including the non vocal track and then continue playing, and recording. why cant I record on the fly like other programs. what am I doing wrong. Help is greatly appreciated

GB doesn't offer "punch-in" recording. But you can easily set an earlier recording point, so you can listen to as much as you want from the audio track, and later cut your recorded snippet to the desired length.

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

Recording commentary track for video clip

I have recorded and edited some video clips and now i want to record an audio commentary to layer onto the audio of the video clip, like how directors do the alternate commentary track for a lot of dvds. It would be a recording of 2-6 people sitting viewing the video together with it's original audio.
Ideally,
1)I would mic each person and feed the mic into the computer to record them each as seperate tracks. I think stp can't do that, but garageband might?
2)I don't want the mics picking up the original audio of the scene they are watching, but I want the people giving the commentary to hear the original audio, as well as what they are saying and what the other people that are sitting in and recording are saying. So the only way I can see that working is to somehow have the original audio of the scene piped into headphones, along with the audio of all the other tracks being recorded.
So how is this all possible, either through my method or another method you could think of. And what equipment would i need, like a mixer or audio interface. If I can't do this natively in stp, than what can I use, like garageband, that i can import into stp for final mixing.

1) STP 1 can't do multi-track recording but STP 2 will be able to do it. In the meantime, yes, you can use GarageBand.
2) You're right, you'll need headphones.
If you want dedicated audio tracks for each one, you'll need an audio interface with multiple preamps like MOTU 8pre. You could also use only a stereo mic to record the whole room. That way, you could use an interface with only two mic pres and you'll need less mics too. And since it would be only one track, you'll be able to use STP. For this kind of recording, you'll want to use condenser mics.

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

File content conversion - sender adapter for Header and detail records

Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
Deepak

Hi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg.

How do I sort tracks for iPod using Lion using iTunes 10??

How can I sort or modify tracks (for audiobooks) in iTunes 10.6.1 using OS 10.7.3 so they sync in the correct order for my iPod Touch? Either through iTunes or with 3rd party software is okay.

First, set the Album field for every track to the book's title. It should be identical for every track in the book, to group the tracks together. The easiest way to do this is select all of the tracks, do a File > Get Info, and set the Album to the book's title. This ensures it's the same for every track.
Here's an example of how I set the metadata on a group of audiobook tracks:
The above shot assumes that the track names themselves currently have part number information. If they don't, don't unset the field that _does_ have that information (e.g., the first track number field).
After that, tracks sort in this order:
- Disc sequence number (xx of yy)
- Track sequence number (aa of bb)
- Name field
I usually set the disc sequence numbers to be empty; set the track sequence numbers to be the right order, and change the Name field to _also_ be sortable, so something like "Book Title, part 1", etc. Use the File > Get Info command on each track individually:
It's tedious, as you have to touch every track. Keep clicking that Next button! But once you've done it a couple times, and with clever use of copy/paste, it only takes a few minutes. I did this 40 track book last night in less than 5 minutes.

Activate WF for incoming post item Records Management

Hi.
Could anyone tell me the steps to activate Workflow for incoming post item (Records Managemet).
I'm traying with this Standard Task
TS78800015
TS78800013
Regards

hi Virgilo,
WF activation has two main steps for initial setup:
go to swu3 & use the automatic workflow generation to do the initial setup of workflow in system
u will need to ensure that the mail traffic to & fro works from the system. This is also one of the setting in SWU3.
Once this is done, u shud be able to see the mails arriving in r/3 inbox, in scaseps inbox plugin.
Further customizing like automatic workflow for processors etc can be found in RMPS_CUSTOMIZING.
thanks & regards,
Pragya

Setting tracks for a dj set recorded in logic

Similar Messages

Maybe you are looking for