Setting Unicode Hex Input as default

Hey. I know most of the unicode character codes I use a lot by heart, such as U+2325 (⌥) and U+2318 (⌘). However, It's a pain to click on the input menu, and switch the input method to Unicode Hex Input overtime I open an application. Or worse, forgetting to, then ending up typing some bull like '™£¡•' instead of what I intended. How can I make my SYSTEM-WIDE 'default' or basic input method STAY at Unicode Hex Input? Or for that matter, anything other than U.S. Extended.

It seems to have suddenly fixed itself, after wondering about this for years, after that post. I'm starting to wonder if my Mac reads Apple Discussions...

Similar Messages

Unicode hex input problem

I have a MBP running Yosemite. My partner has a MBAir running OSX 10.8.5 (M-Lion?)
He needs to use some medieval characters in his writing as a grad student in ENglish.
On both machines, we installed the Unicde Hex Input source and selected it.
On my machine, I can use the OPTION-KEY + 4-digit-hex-code to produce the characters as desired.
On his machine, with the OPTION-KEY held down, as you type each digit of the hex code, you get a different character, instead of one character after typing the 4-digit code.
Any suggestions?
Thanks,
Dave

Thanks, Tom -- I'll check it again as soon as I have access to the MBAir, but I'm pretty sure I checked that the U+ input source was selected.
Also, regarding character viewer, even on my own machine (where U+ input works fine) I don't see any of the medieval charcaters in the character viewer, no matter which font (?) I pick from the left-hand list.
For instance, here's a medieval character, produced through the OPTION+ method: ꝑ (blown up to 18 pts to make it easier to see). But I can't find it using the character viewer in Latin or character-like symbols. I think I may not understand how to use the character viewer correctly(?) What is the relationship between the list of symbol-sets (if that's the right word) in the character viewer and the font that's selected in the editor I'm using?
Thanks again,
- dave

Setting keyboard input to default to phone

Trying to figure out how to set my keyboard input to default to the phone, NOT to search or any other text-based input. I want to be able to type a phone number into my phone and call someone. Is this too much to ask? I have spent hours trying to figure this out and can't find an answer. Help please! And thanks.

I don't think so, that I know of.
Are most of your calls all dialed by number or are there a few numbers you dial quite often?
You can set a screen shortcut to those.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unicode Hex Keyboard

I have purchased an iPhone app that requires a 'Unicode Hex Keyboard' on my iMac. I have a 'Unicode Keyboard' in the 'International' preferance pane but there is no 'Unicode Hex Keyboard'. The supplier of the app advises that I must install this hex keyboard. My installation CD informs me that all keyboards are loaded at install time however.
How might I go about installIng this keyboard?
Thanks in advance for your help.

I have a 'Unicode Keyboard' in the 'International' preferance pane but there is no 'Unicode Hex Keyboard'.
That must be the right one. It's really not possible for this to be missing from system prefs/international/input menu. The icon has a little U+ on it I think.
It is certainly most unusual for anything to require it. Do they tell you what you are supposed to do with it?

Lenovo a369i no setting for chinese input. CAN IT POSSIBLE ? SURELY DEFECTS !

so amazing, i received a369i from lazada, paid the man, play with it, i use default english for phone, for language input, i cannot find chinese, so unbelievable, the giant of china, i didn't think it is DEFECTS, so keep playing, until i give up, i cannot find chinese language in input. then i look at lenovo site, malaysia site, i am surprise too, no chinese !
it is defect surely. simple build in function not there. otherwise, for chinese BIG NAME, i cannot find chinese pin yin input, it is a joke.
shall i return to lazada, or what ? what a waste of my time !
Solved!
Go to Solution.

Hi
Please go to Settings-->Apps-->All and search for Pinyin.If you can't find the Pinyin input just download it from
https://play.google.com/store/apps/details?id=com.google.android.inputmethod.pinyin
Also you can use a third party keyboard like TouchPal and download whatever language you want..including Chinese handwriting or PinYin. https://play.google.com/store/apps/details?id=com.cootek.smartinputv5
BTW.If you set Chinese as the system default language...Still can't use PinYin?
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

PFIs on E series configured for input, by default?

Are the PFIs on the E series configured, by default, for input?
I work with a 6071E board and am trying to trigger analog acquisition with an external trigger on PFI0/TRIG1, but it's not working.
Of course, there could be any number of reasons for this (especially comedi software...ugh), but I wanted to make sure I don't have to explicity configure PFIs for input to use them as such.
thanks, jon

The lines are configured for input by default. According to Appendix C of the E Series User Manual at system power-on and reset, both the PFI and DIO lines are set to high-impedance by the hardware. This means that the device circuitry is not actively driving the line either high or low.
Regards,
Justin Britten

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

All future MacBook with 10.7 Lion will be set to 64bit kernel by default always ?

Dear Apple and Mac Expert,
Actually I hope Apple can answer this if possible or someone can redirect me to any Apple post ?
I learned that right from 10.7 Lion available, the default kernel mode is always set to 64bit no matter installed in MacBook White or Pro. I am wondering is it same for all future MacBook Air and Pro that come with 10.7 Lion will be set to 64bit kernel by default??
I really need a confirmation on this to support my future plan.
Appreciate Apple can answer this or someone can help.
Thanks in advanced!

Apple typically does not answer questions here. Further, your question invites speculation about future product releases, which is specifically forbidden in the Terms of Use for these forums.
That having been said, Apple usually looks forward, not back. Once they remove something it is usually gone forever. Witness the floppy drive disappearing in the late 1990s.
Best of luck.

Crystal Report with text(csv) data file, can we set it as input parameter?

Hi,
I am a new user of Crystal Reports 2008.
I have created a report with charts in it. The input data comes from a csv text file.
Can I set the name of this text file as an input parameter?
as I need to generate 44 similar reports with different text filenames(and data)?
Thank you.
Regards

Brian,
Thanks much.
I did exactly what you said.
Just to see any change, I first gave a bad report file name just to see if I am accidentally pointing to a different file,
but I got an error saying report not found.
Then I renamed my original datafile name and generated a report and it still generated one without giving an error.
Then I also gave a junk name to the logoninfo and printed that name, the new name was assigned to logoninfo, but the code did not error out.
It ended up generating the report.
Now here is what I think is happening,
1) The save data in report option seems to be still on even though I have turned it off in 2 locations
a) file -> Report Options
b) file -> Options -> Reporting tab.
2) For some reason the logoninfo is getting ignored as well.
Since I did not see any answers yesterday I posted a link to this thread on the .Net forum
Crystal Report with text(csv) data file, can we set it as input param? C#
and Ludek Uher says that I am connecting to the text file via a DAO database engine and so need to use the same code for changing the text file as for changing an Access database.
But the link he gave me tells me to try the same thing that we have been trying..
Here is my plan,
1) I will first try and find out why my save data with report option is still on ( but it shows off in Crystal ).
2) why is LogonInfo getting ignored.
Meanwhile any suggestions from anyone are welcome.

Crystal Report with text(csv) data file, can we set it as input param? C#

Hi,
I am new to the forums and posted a question which belonged to the .net - SAP Crystal reports group.
Can someone help me with my problem? following is the thread that I have started.
Crystal Report with text(csv) data file, can we set it as input parameter?
Thank you in advance.

Looking at the original thread, you are connecting to the text file via the DAO database engine:
"I added the text file as follow, new connection -> Access/Excell (DAO) -> select the file and the database type as text"
Thus I would use the same code for changing the text file as for changing an Access database. See Kbase [1218178 - Error: "Logon failed" when connecting to Access database in .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333133373338%7D.do] for more information. If that does not work, you may want to consider connecting via ODBC or feeding the data from the text file to and ADO .NET dataset and pointing the report at the dataset.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Set Microsoft Outlook as the default mail client.

Every time I am trying to sync my calendar, notes and mail account with my iPhone through iTunes I keep getting a notifactions saying 'Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client'.
The problem is that Outlook IS the default client.
Why can iTunes not complete this task for me...
Microsoft Office Professional Plus 2010 Build 14.0.4536.1000 64-bit.
Thanks.

I'm getting this and it's really annonying. The Nokia PC Suite provided a basic but functional PC calendar. Surely there's a simple PC client for the iPhone Calendar somewhere. I use Outlook Express and started using Outlook 2002 to manage my calendar but since a recent iTunes upgrade it's stopped working, giving this "default mail client" error. When I set Outlook to be the default mail client it made no difference.
Apple - you've scored an own goal here. Something that did work now doesn't work, and the only thing that's changed is your software.
I don't doubt it's down to compatability with M$ Outlook Add-ins, but they've not changed.

How to set current year,month as default value in combo box

hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
Step2
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
year | month | Product | revenue 
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AM

hi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen

How to set system date as a default value in UIX/XML page?

Example: We set default values using following statements:
<set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
<set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
Also, does anyone have a reccomendation on a good book for uix/xml?
Thanks, Ali.

bump

How to set up icloud as the default calendar in Outlook

how do I set up icloud as the default calendar in Outlook?

Not possible, Outlook only allows Exchange or local calendars to be the default, same with Contacts.

Set Adobe Reader 9 as Default pdf Opener

New laptop. I have Adobe Acrobat 5 and Adobe Reader 9 installed. Need the 5 because it has Acrobat Distiller.
PROBLEM: When I try to open pdfs from the web I get an error (The Adobe/Acrobat Reader that is running cannot be used to view pdf files from the Web Browser. Version 8 or 9 is required.)
Working in Microsoft Windows environment.
How can I set version 9 as the default to open web files?
Thanks!

Found the fix in some of the previous posts that showed up on the right of my screen after I posted this question. Nice system!

Setting Unicode Hex Input as default

Similar Messages

Maybe you are looking for