Setting up 24" LED display for the first time

Can anyone tell me, and forgive me if this is stupid, how to get the LED display to work?!
I have an 09 MBP and i've plugged it all in, the LED immediately powered up and it displays the Aurora image but I cant seem to work out how to have what i'm doing on the MBP screen transferred to the LED. The only response I have had from it is when I went into Displays in System Pref. and then the resolution options screen showed on the LED.
So far I have a wired keyboard connected to the back of the LED - which is working fine (i'm typing this on it) but i have no mouse connected yet - the Magic Mouse I have ordered hasn't arrived yet and I have been planning to use the MBP trackpad until it does. Is that the problem?
If not, what is?! Thanks.

I've worked out something else too...
With mirroring turned off I can get the open windows on the MBP to show on the LED by dragging the windows on the MBP off the MBP's screen to the right, which then makes the windows appear from the left on the LED, and they do so with the same clarity as they are displayed at on the MBP. The quality of the image using this is perfect, and yet with mirroring turned on the image is just not as good. This seems very weird.
Any suggestions on this also?

Similar Messages

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

How do I accept the Terms and Conditions when trying to set up an Apple ID for the first time ( using my iphone)?

I am trying to create an Apple ID by using the Itunes icon on my iphone 5s for the first time. It opens up a screen with the 54 pages of Terms and Conditions and it does not allow me to even accept the Terms and Conditions... no Accept option or place to click!
The only option is to Send the terms and conditions via email... which also does not work...it keeps asking me to "try again"... Has someone else had this problem?

Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

I am using an airport express to stream from iTunes to my stereo. My router is a net gear type G. Setting up is no problem for the first time. But, when I close iTunes then restart I have to reset (using the reset button)and reset up. Wanna do it one?

Using a. Airport express to stream from iTunes. My Router is a Netgear type G. The express sets up fine and works the first time. When I try to use it at a later date after closing then reopening iTunes I have to physically reset the express and then go through the process of finding it again. Is this normal?

I have a 3rd generation (802.11n capable, 2.4Ghz only) airport express, my problem is that I've tried using it to extend my network and that brick wall, no matter how close I get the express to the room, the signal and throughput in that room becomes abysmal.
As you might imagine, brick is a lot like cement, and it will not allow much of the wireless signal through.
Regarding your Express, there is no such thing as a 3rd Generation model....yet. You likely have a 1st Generation AirPort Express. Check and confirm the Model No on the side of the Express. A 1st Gen model is A1264.
Here's my problem, I don't think the express supports "extending" a network from a wired network jack.
The Express can "extend" wirelessly, or using an Ethernet connection. The configuration for this is very simple, but post back if you need it.
The jack just seems to be shut off
Have you temporarily turned off the wireless on a laptop and tried to connect it using an Ethernet cable to the wall jack as a "test"?
If you can get a good Internet connection this way, then you know the Ethernet cabling and jack are working correctly.
On the other hand, if you cannot get an Internet connection on the laptop during this "test", then this indicates that the Ethernet cable or jack is not functioning correctly and the wiring will need troubleshooting before you can proceed any further.
I need to create a whole new wireless network in this room for this configuration to work?
AirPort Setup will take care of this for you automatically during the configuration of the AirPort Express.
If I have an apple TV connecting to the express and an AppleTV connecting to the extreme, will they both be visible when connected wirelessly to either network?
Yes
Will I be able to connect to my network seemlessly?
Yes
Post back after you have confirmed that the Ethernet cable and Ethernet jack are functioning correctly in the temporary "test" mentioned above. Then, we will continue.

Setting up a leopard server for the first time in live office environment

Hi
After a lot of reading and testing in a small LAN setup, Im going to install and setup leopard server in a small business, with max 10 employees.
Any hints on what I should expect? Any advice on most clever approach?
In the Server Administration Document there is a sample setup in chapter 9. I plan on following this, but will the employess(clients) be able to access the Internet while installation is in progress?
Any advice is appreciated.

I have to use the servers IP address when accessing iCal or wiki or any other service I guess.
I'm not sure what to do to get leopard.mydomain.com to work in my setup. We have a hosting firm to host our mail and web and they control the dns. Do I contact them to add a record for leopard.mydomain.com?
First (and in general) I'd only use and have publicly-registered domain names here.
I'd avoid use any domains that I didn't have registered.
If you have public static IP addresses for your server(s), then I'd suggest deferring all public-facing DNS services and registrations to your ISP or hosting provider, and to your ISP's DNS servers. Your ISP or hosting provider (specifically for mail or public-facing services) would set the mail MX record and any DNS translation for the public static IP address of your Leopard server box.
If you are using private addresses inside a NAT perimeter (which doesn't work for public-facing service such as mail or non-VPN access to blogs and wikis and such), then you can use Leopard Server or (preferably) Snow Leopard Server DNS to serve up local addresses inside your perimeter, and the "local" DNS server can then forward requests for all zones that it is not authoritative for out to your ISP's DNS servers. You probably don't want to be running "public" DNS until you've a better handle on how DNS works; start with a "local" server and learn.

HT201320 what is the domain if i want to set up my email account for the first time??

hi guys i need your help because i buy a new ipad and i don´t know why i can´t put my email from hotmail in the email accounts and is different from the account did i use with my apple id

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I was setting up my IPod Nano 7 for the first time and I can't play the songs I bought. What did I do wrong?

I was setting up my IPod Nano7 for the first time and purchased 3 songs. When I went to play it on my IPod the screen said "No Music". What did I do wrong?

We are going through same thing and looks like alot of other people also. Seems to me Apple would have invalid email instead of us loosing the gift card all together. Very irratating. Good Luck.

I'm setting up my Time Capsule for the first time and cannot get an internet connection throughWAN connection

I'm setting up my Time Capsule for the first time and can't get an internet connection via ethernet cord

So new AC model TC??
What modem is it? Pure cable modem .. did you power cycle the modem ( OFF for at least 30min..)??
This is essential to lose the old setup and start afresh.
How have you setup the TC?
Did you try just bridge to existing router? If it doesn't get an IP and you just bought it, possible it is faulty.
Lots more details.. really important things like did the ethernet connectivity leds go on.. both the TC port and the modem port - front ethernet indicator should light up..

I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours. Is this right?

I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours. Is this right?

I think you may not using the right technical terms. When backing up to icloud, there is no way you'd get a message saying things will be wiped. This message may be displayed when you are performing a RESTORE from a backup and then trying to cancel it.
If you are doing a restore, then you can reboot and restore again.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

I have bought an iPhone4 and to be able to use it for the first time I connected into a friends itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?

I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow me

first of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out

When using my new US ipad for the first time my computer switched it to an Australian format (where we used to live) How do I set the default to all US settings on all of my iproducts? I set them individually but when they sync with my comp they b/c AU

When syncing my iPad for the first time to my iTunes (which was in Australia at one time but no longer) my iPad defaulted to the Australian format for phone numbers and each contact listed was now an Australian address. My iTunes is set to the USA. How/Where do I change the setting? It also changes the default to Australia on each of my iTouches and iPhones.
Thanks!

thanks for the help

HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

Setting up a cluster for the first time: newbie questions

Any help appreciated with this situation:
          I'm trying to set up a cluster for the first time and running into
          issues (no big surprise). I'll outline my situation and pose questions
          as they arise. If/when I get things to work I'll post a step-by-step
          summary of what it took to get a simple cluster going.
          Here's what I have:
          machines:
          1 Windows 2000 machines with WL 6.1
          2 RedHat Linux machines with WL 6.1
          All machines are on the same Home LAN, can see each other, etc.
          IP addresses are:
          Windows box: 192.168.1.100
          Linux box 1: 192.168.1.102
          Linux box 2: 192.168.1.103
          servers:
          I've set up the Windows machine as my admin server, and set up
          a managed server on each Linux machine. I created a cluster that consists
          of the 2 Linux machines and deployed the web app and EJB to the cluster.
          The Windows machine is acting as a Proxy using ClusterServlet.
          The web application has been set as the Default Web Application on the
          two Linux machines. All 3 machines are listening on ports 80/443. I also
          set up session memory replication through the console.
          Application:
          I have an application that I package as an EAR file. I'm using it as a
          "reference" application designed to mimic a real world app as much as possible.
          The EAR file contains a web application that uses Struts. It also consists
          of a single Stateless Session Bean. The WAR file and EJB Jar are all
          packaged up into the EAR file. I've been able to run this application just
          fine on a single managed server on all 3 machines.
          The web application works fine, and it can invoke the EJB. I can also
          invoke the EJB from Java stand-alone clients. Struts works great. All is
          well with the world. Now I'm trying to "cluster-ize" this app using
          the environment described above and encountering issues.
          I've read the docs and followed the instructions according to the
          "Weblogic Bible" book. I can bring up all 3 servers and the Linux
          managed servers connect to the cluster just fine. I can also
          see the Struts messages in their logs which normally happens and tells me
          the webapp is initialized properly. The console tells me that the managed
          servers are running. I get no error messages starting up any of the serves.
          Here are the problems I am encountering.
          When I try to access the Web Application (through a browser on the
          Windows machine using http://localhost) I get the following error message:
          <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
          x,admin) found no context for "/". This request does not match the context path
          for any installed web applications and there is no default web application confi
          gured.>
          Also, when I try to invoke the EJB through a stand-alone Java client,
          I get a JNDI lookup error on the EJB's home interface.
          Questions:
          Question1: I noticed when setting up the machines that console lets you
          define a "Machine" or a "Unix Machine". What's the difference? Should I
          define the Linux machines as Unix machines or machines, and what are the
          consequences of either choice?
          Question2:
          I'm not totally clear on how my web.xml should look to set up Struts,
          the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
          Here is what I had before I tried to cluster and which works fine:
          <filter>
          <filter-name>MainFilter</filter-name>
          <filter-class>com.refapp.servlets.MainFilter</filter-class>
          <init-param>
          <param-name>myAttribute</param-name>
          <param-value>Foo</param-value>
          </init-param>
          </filter>
          <filter-mapping>
          <filter-name>MainFilter</filter-name>
          <url-pattern>/*</url-pattern>
          </filter-mapping
          
          <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          <init-param>
          <param-name>application</param-name>
          <param-value>refappstruts</param-value>
          </init-param>
          <init-param>
          <param-name>config</param-name>
          <param-value>/WEB-INF/struts-config.xml</param-value>
          </init-param>
          <init-param>
          <param-name>debug</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>mapping</param-name>
          <param-value>org.apache.struts.action.RequestActionMapping</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
          </servlet>
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          <welcome-file-list>
          <welcome-file>index.do</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>index.html</welcome-file>
          </welcome-file-list>
          (I have set up a "dummy" 0-length file called index.do that triggers
          Struts to go into its ActionServlet when first accessing the web site).
          Here is how I added ClusterServlet to web.xml:
          servlet>
          <servlet-name>ClusterServlet</servlet-name>
          <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
          <load-on-startup>0</load-on-startup>
          <init-param>
          <param-name>defaultServers</param-name>
          <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
          </init-param>
          <init-param>
          <param-name>DebugConfigInfo</param-name>
          <param-value>ON</param-value>
          </init-param>
          </servlet>
          <servlet-mapping>
          <servlet-name>InitServlet</servlet-name>
          <url-pattern>/servlet/InitServlet</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>ClusterServlet</servlet-name>
          <url-pattern>/</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>ClusterServlet</servlet-name>
          <url-pattern>*.html</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>ClusterServlet</servlet-name>
          <url-pattern>*.jsp</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>ClusterServlet</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          Clearly there is a problem with the Default Web application not being
          seen/mapped properly. Any chances my URL mappings for the filter servlet,
          Struts, and ClusterServlet are stepping on each other?
          With respect to the EJB, here is what my weblogic-ejb-jar looks like:
          <weblogic-ejb-jar>
          <weblogic-enterprise-bean>
          <ejb-name>Hello</ejb-name>
          <stateless-session-descriptor>
          <pool>
               <max-beans-in-free-pool>100</max-beans-in-free-pool>
          </pool>
          <stateless-clustering>
          <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
          <stateless-bean-load-algorithm>
          round-robin
          </stateless-bean-load-algorithm>
          <stateless-bean-methods-are-idempotent>
          true
          </stateless-bean-methods-are-idempotent>
          </stateless-clustering>
          </stateless-session-descriptor>
          <jndi-name>Hello.Home</jndi-name>
          </weblogic-enterprise-bean>
          I run this through ejbc and package everything up into the EAR file.
          However, I get a JNDI lookup failure when I try to access the Bean from
          a standalone Java client running on the Windows machine.
          Here is the jndi.properties file that I am using:
          java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
          java.naming.provider.url=t3://localhost:80
          Any ideas what I'm doing wrong here? I can post config.xml also if needed.
          Thanks in advance!


Let me try to answer :)....
          A1> No need to name diff machines by default weblogic
          considers the servers are physically located in diff boxes.
          The names are used to differtiate the mang servers which are in
          multihomed
          Some things to chk
          1> Did u targeted the ear file Target as cluster.
          2> Can u see on the Admin console that both the man servers
          are participated in the cluster( u can see by clicking the monitoring
          tab on the Cluster node).
          3>Is the URL:PORT for the default web app correct?
          the reason: is I dont see the port# on the link u mentioned
          4> probably ur ejb might not been deployed on the target thats the
          reason u cant access thru java client. If u correct the targets that
          will probably fix it.
          Hope this helps
          Please post the result
          Thanks
          Sudhir
          [email protected] (Chris) wrote in message news:<[email protected]>...
          > Any help appreciated with this situation:
          > I'm trying to set up a cluster for the first time and running into
          > issues (no big surprise). I'll outline my situation and pose questions
          > as they arise. If/when I get things to work I'll post a step-by-step
          > summary of what it took to get a simple cluster going.
          > Here's what I have:
          >
          > machines:
          > 1 Windows 2000 machines with WL 6.1
          > 2 RedHat Linux machines with WL 6.1
          > All machines are on the same Home LAN, can see each other, etc.
          > IP addresses are:
          > Windows box: 192.168.1.100
          > Linux box 1: 192.168.1.102
          > Linux box 2: 192.168.1.103
          >
          > servers:
          > I've set up the Windows machine as my admin server, and set up
          > a managed server on each Linux machine. I created a cluster that consists
          > of the 2 Linux machines and deployed the web app and EJB to the cluster.
          > The Windows machine is acting as a Proxy using ClusterServlet.
          > The web application has been set as the Default Web Application on the
          > two Linux machines. All 3 machines are listening on ports 80/443. I also
          > set up session memory replication through the console.
          >
          > Application:
          > I have an application that I package as an EAR file. I'm using it as a
          > "reference" application designed to mimic a real world app as much as possible.
          > The EAR file contains a web application that uses Struts. It also consists
          > of a single Stateless Session Bean. The WAR file and EJB Jar are all
          > packaged up into the EAR file. I've been able to run this application just
          > fine on a single managed server on all 3 machines.
          > The web application works fine, and it can invoke the EJB. I can also
          > invoke the EJB from Java stand-alone clients. Struts works great. All is
          > well with the world. Now I'm trying to "cluster-ize" this app using
          > the environment described above and encountering issues.
          >
          > I've read the docs and followed the instructions according to the
          > "Weblogic Bible" book. I can bring up all 3 servers and the Linux
          > managed servers connect to the cluster just fine. I can also
          > see the Struts messages in their logs which normally happens and tells me
          > the webapp is initialized properly. The console tells me that the managed
          > servers are running. I get no error messages starting up any of the serves.
          >
          > Here are the problems I am encountering.
          >
          > When I try to access the Web Application (through a browser on the
          > Windows machine using http://localhost) I get the following error message:
          >
          > <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
          > x,admin) found no context for "/". This request does not match the context path
          > for any installed web applications and there is no default web application confi
          > gured.>
          >
          > Also, when I try to invoke the EJB through a stand-alone Java client,
          > I get a JNDI lookup error on the EJB's home interface.
          >
          > Questions:
          > Question1: I noticed when setting up the machines that console lets you
          > define a "Machine" or a "Unix Machine". What's the difference? Should I
          > define the Linux machines as Unix machines or machines, and what are the
          > consequences of either choice?
          >
          > Question2:
          > I'm not totally clear on how my web.xml should look to set up Struts,
          > the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
          > Here is what I had before I tried to cluster and which works fine:
          >
          > <filter>
          > <filter-name>MainFilter</filter-name>
          > <filter-class>com.refapp.servlets.MainFilter</filter-class>
          > <init-param>
          > <param-name>myAttribute</param-name>
          > <param-value>Foo</param-value>
          > </init-param>
          > </filter>
          >
          > <filter-mapping>
          > <filter-name>MainFilter</filter-name>
          > <url-pattern>/*</url-pattern>
          > </filter-mapping
          >
          >
          > 
          > <servlet>
          > <servlet-name>action</servlet-name>
          > <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          >
          > <init-param>
          > <param-name>application</param-name>
          > <param-value>refappstruts</param-value>
          > </init-param>
          >
          > <init-param>
          > <param-name>config</param-name>
          > <param-value>/WEB-INF/struts-config.xml</param-value>
          > </init-param>
          >
          > <init-param>
          > <param-name>debug</param-name>
          > <param-value>2</param-value>
          > </init-param>
          >
          > <init-param>
          > <param-name>mapping</param-name>
          > <param-value>org.apache.struts.action.RequestActionMapping</param-value>
          > </init-param>
          > <load-on-startup>2</load-on-startup>
          > </servlet>
          >
          > <servlet-mapping>
          > <servlet-name>action</servlet-name>
          > <url-pattern>*.do</url-pattern>
          > </servlet-mapping>
          >
          > <welcome-file-list>
          > <welcome-file>index.do</welcome-file>
          > <welcome-file>index.jsp</welcome-file>
          > <welcome-file>index.html</welcome-file>
          > </welcome-file-list>
          >
          > (I have set up a "dummy" 0-length file called index.do that triggers
          > Struts to go into its ActionServlet when first accessing the web site).
          >
          > Here is how I added ClusterServlet to web.xml:
          >
          > servlet>
          > <servlet-name>ClusterServlet</servlet-name>
          > <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
          > <load-on-startup>0</load-on-startup>
          > <init-param>
          > <param-name>defaultServers</param-name>
          > <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
          > </init-param>
          > <init-param>
          > <param-name>DebugConfigInfo</param-name>
          > <param-value>ON</param-value>
          > </init-param>
          > </servlet>
          >
          > <servlet-mapping>
          > <servlet-name>InitServlet</servlet-name>
          > <url-pattern>/servlet/InitServlet</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>action</servlet-name>
          > <url-pattern>*.do</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>ClusterServlet</servlet-name>
          > <url-pattern>/</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>ClusterServlet</servlet-name>
          > <url-pattern>*.html</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>ClusterServlet</servlet-name>
          > <url-pattern>*.jsp</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>ClusterServlet</servlet-name>
          > <url-pattern>*.do</url-pattern>
          > </servlet-mapping>
          >
          >
          > Clearly there is a problem with the Default Web application not being
          > seen/mapped properly. Any chances my URL mappings for the filter servlet,
          > Struts, and ClusterServlet are stepping on each other?
          >
          > With respect to the EJB, here is what my weblogic-ejb-jar looks like:
          >
          > <weblogic-ejb-jar>
          > <weblogic-enterprise-bean>
          > <ejb-name>Hello</ejb-name>
          > <stateless-session-descriptor>
          > <pool>
          >      <max-beans-in-free-pool>100</max-beans-in-free-pool>
          > </pool>
          > <stateless-clustering>
          > <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
          > <stateless-bean-load-algorithm>
          > round-robin
          > </stateless-bean-load-algorithm>
          > <stateless-bean-methods-are-idempotent>
          > true
          > </stateless-bean-methods-are-idempotent>
          > </stateless-clustering>
          > </stateless-session-descriptor>
          > <jndi-name>Hello.Home</jndi-name>
          > </weblogic-enterprise-bean>
          >
          > I run this through ejbc and package everything up into the EAR file.
          > However, I get a JNDI lookup failure when I try to access the Bean from
          > a standalone Java client running on the Windows machine.
          > Here is the jndi.properties file that I am using:
          >
          > java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
          > java.naming.provider.url=t3://localhost:80
          >
          > Any ideas what I'm doing wrong here? I can post config.xml also if needed.
          >
          > Thanks in advance!

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

Setting up 24" LED display for the first time

Similar Messages

Maybe you are looking for