Setting up 7770 and gf 560 in win 8 not working

Hi
I just bought 2 new computers and put them together myself. Both have MSI Z77A-G43 motherboard but different Graphic cards. 1 has MSI 7770 PDM1GD5 and other has N560GTX.
I started the CPU with win8 USB stick and installed Win8. Screens were black while in the graphic cards, but moved the cord to the on-board graphic adapter and the screen turns on.
All the drivers I've seen available aren't "compatible" with win8 and while trying to install them, nothing happens, no files get installed. And if I try running them in compatability mode for win7, they seem to freeze just before writing to the hard disks. So never any files get written. Everything else seems to work fine though.
Are there maybe just no compatible drivers for win8 ?
Win8 finds the graphic card in the Device manager.
Really need some help so I don't have to go back to win7 (10sec boot time including typing in password is just too amazing).

Problem solved!
  PCI-E connector wasn't connected...
Everything works fine now

Similar Messages

  • I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?          When will iTunes come to Ubuntu

    I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
    When will iTunes come to Ubuntu?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error

    Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???

    Assign an email address (gmail.com?)
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

    SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
    Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
    I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
    Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
    Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
    Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
    Thanks!

    WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
    running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
    the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
    these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
    it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
    basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
    so if anyone else has the same problem or any advice on how to fix the problem, please comment.

  • Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?p

    can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?

    The problem is I cannot turn on wireless setting.  The "sign in to icloud  -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again.  If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work.  Vicious circle.

  • Zero Fill and Upper Case in Visual Composer not working

    Hello,
    I am building my first VC application and hit a small wall from get go. When I create input fields and set text formats for one to have "Zero Fill" and for the other one "Upper Case" they do not seem to work properly.
    “Zero Fill” does not work at all. I set this format and also set max length as 10 to be used as input for customer account #. But it does not perform conversion. When I call a BAPI to get customer list, if I enter 0000000100 it works. When I enter 100 it does not work. Thus "Zero Fill" does not take effect.
    "Upper case" works but only after refresh. If I enter ac10 as company code and then click submit it does not work. However if after entering ac10 I press enter and then submit, it work.
    Does anyone have any info on how to deal with this? We are using VC 7.0
    Thanks,
    Alex

    Hi ALex,
    Now I got your problem. I suggest a solution for it.
    Go to the design board of VC.
    I think you have an Input Form that contains the input fields and the Submit button. There will be a link named "submit"between the Input Form & the Data Service(say BAPI). Click on the  submit link, you will get the Input Fields & Assigned values of the Input Form at the bottom right side. Go to the Assigned Value of the particular field & apply a formula like UPPER(@inputfield). So now whatever case you give in the inputfield, it is converted to UPPER case before Submiting the values.Keep the Upper Case option checked at the formatting tab of the Input field properties, this will help to display the value in Upper case.
    For eg, BAPI_BANK_GETLIST, the input fields are BANK_CTRY & MAX_ROWS.
    Make the assigned value of bank_ctry as UPPER(@BANK_CTRY), you can get this with the help of formula. 
    This will solve your problem.
    Regards,
    Shemim

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • (fn+F2 and fn+F3) for brightness are not working

    (fn+F2 and fn+F3) for brightness are not working, while the other function working properly... help me plz
    DJanoon

    What is the product number?
    Did anything change before this started happening?
    Power the system on and press F10 about once a second to get into BIOS.  Once you are in BIOS, go to the configuration tab (typically next to last tab) and set Action Keys to enabled.  Save the changes, exit, and the system should reboot automatically.  Test the brightness keys wihtout pressing the Fn key.  I suspect they will not work in this state, but I want to rule out the possibilities while awaiting the product number.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • When I press "****" and r key capitol r dose not work.

    When I press "****" and r key capitol r dose not work. I restarted my computer, and it did not solw the problem. I tried a wired keyboard and it dose the same.

    Hi, thanks for tying to solw my problem. I found that I have set up 3 defferent keys to start defferent programs. I have assigned capitol "c" for start a gmail massege, "r" dose not do anything, and shift plus "g" also  starts the gmail to creat masege.
    I just do not remember where I did it in sys window I tried all the icons and no luck.
    If you would know where to find the coresponding program to change it back please let me know.
    Thanks

  • I updated to 6.1.3 on my iPaad 1, and now my app store does not work.  What should I do?

    I updated to 6.1.3 on my iPad 1, and now my app store does not work.  What should I do?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

Maybe you are looking for