Setting up a background
Hello,
I would like to set a background (link below) but the shape is not look good with repeat is there any way so the transition will be smooth or actually it's not possible with that kind of bacground img?
http://wook.sytes.net/
Hi,
Just make sure that the end of your image (right side) and the beginning of that same image (left side) can «melt» together. You can use Adobe Photoshop to make sure the transition between will be «invisible» to the user.
Hope this help ...
Similar Messages
-
Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.
-
How to set CAM Mode background wallpaper
Hi forum users,
Where can i download or find the "xv" application ?
Thanks.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.
Anthony Worrall wrote:
In chapter 10 "Control Access Mode" of the "Sun Ray Server Software 3.1
Administrator's Guide for the Solaris Operating System"
http://docs.sun.com/source/819-2384/cam.html
To Change the Backdrop
1. Run xv (version 3.10 or later) on any desired image.
2. Save the file as "XPM". Rename the file from <>.xpm to <>.pm.
3. Edit the file /opt/SUNWut/kiosk/prototypes/dtsession/Dtwm and change
the two backdrop lines to the full pathname of the <>.pm file.
You can also place the <>.pm file in /usr/dt/share/backdrops and then
refer to it by <> in the Dtwm file.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mohamed Ali Bin
Abdullah
Sent: 16 August 2006 13:14
To: [email protected]
Subject: [SunRay-Users] How to set CAM Mode background wallpaper
Importance: High
Dear SunRay Fourm Users,
I need help regarding Sun Ray CAM mode background wallpaper settings.
My objective is that, non-card users( DTUs ) will start the Controlled
Access Mode. In CAM mode i don't want any application to be launch. I
want CAM mode background shows only my wallpaper( jpg format ). Users
with card can access the system( dtlogin ). I have set those policy in
SunRay Web Administration Console and restart the services.
My question is, how can i set or configure the CAM mode background to
show my wallpaper( jpg fornat ) ?
These are my setup environment information:
- Sun E220( Sparc )
- Installed Solaris 10 06/06 OS.
- Installed latest Solaris 10 recommended patches
- SunRay Server Software 3.1
- Installed patch 120879-04
- 2x SunRay 1
- 2x SunRay 150
- 2x SunRay 170
I would be thankful if anyone can offer me help and guidance.
Please let me know if you need any more information.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.Hi forum users,
Where can i download or find the "xv" application ?blastwave.org has it for example -
I'm trying to disable the "Set as Desktop Background" option for Firefox 3.6 in a Mac OSX 10.5 environment. I have a default image that I want as the background on my desktop and I don't want it to be changed.
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
Add code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#context-setDesktopBackground {display: none !important;}</nowiki></pre> -
Set current row background color
during post-query process, if record meets condition,
i would like to set the color of entire line.
thank you
[email protected]Hi Jim,
create a visual_attribute named e.g. PQR and set the desired background color.
In post-query trigger:
declare
currec number := Get_block_property('block1', current_record);
begin
if "condition" then
set_item_instance_property('item1', currec,visual_attribute,'PQR');
set_item_instance_property('item2', currec,visual_attribute,'PQR');
set_item_instance_property('item3', currec,visual_attribute,'PQR');
end if;
end;
Good luck,
Monica -
How to set Analysis graphics background color to Transparent? not White.
How to set Analysis graphics background color to Transparent? not White.
thanks
Edited by: user13257485 on 2010-8-15 下午11:53
Edited by: user13257485 on 2010-8-15 下午11:55Hi,
We almost had the same requirement, but we just needed to color a specific column.
Here goes the solution to that, you might do the same for your row highlighting
Changes are required in jsff and one method to be added in backing bean
1. JSFF :
<af:column headerText="Amount"
id="c4" width="100"
inlineStyle="#{backingBeanScope.BackingBean.cellColor}">2. Backing Bean
//searchResultTableVO is Table's VO
public String getCellColor() {
FacesContext ctx = FacesContext.getCurrentInstance();
ExpressionFactory ef = ctx.getApplication().getExpressionFactory();
ValueExpression ve = ef.createValueExpression(ctx.getELContext(), "#{row}", FacesCtrlHierNodeBinding.class);
FacesCtrlHierNodeBinding node = (FacesCtrlHierNodeBinding)ve.getValue(ctx.getELContext());
Row row = node.getRow();
if(row.equals(searchResultTableVO.getCurrentRow())){
//You can add your inline style for font-style too
return "background-color:Red;";
return null;
}Hope this is helpful :)
Regards,
Neha.. -
Set all TextField background color
I searched the help and online for how to accomplish this and
came up with the following code. It would seem to me that there is
a more straight forward way but this is the best I could manage.
Any suggestions on how improve this. Also I could not get the 'for
in' or 'for each in' to work, the loop would not iterate when
applied to the page_mc.Hi,
You can set this in the Border palette.
You might also want to set a white background for the value area (in the Object > Field palette) and zero margins in the Layout palette.
Hope that helps,
Niall
Assure Dynamics -
Setting a default background color
Hi All,
I would like to set a default background color for all the
components that I'm going to draw. What is the best
way to achieve this?
Thanks.
SyedYou can set using UIManager of the Look and Feel.
UIManger.put("Button.background", Color.blue);
will set the color of all the JButtons to blue. Like that you can change for all the components you need.
Mohan -
can i make the setting and keyboard background black ? , because i have vision problem and the white color is too bright and cause pain and headache for me . thanks
Drmikekuna wrote:
... Sony AVCHD .. Canon SD ... Logitech .. Flip Mino HD. ..
.. Certainly not the best idea for a professional but just fine for a guy who likes to edit for fun.
that's were the fun stops on a MacOs-based system ..
FC/e supports only a few 'standards': DV (as from miniDV cams), HDV (from miniDV devices), AVCHD (from most devices) and with a little trick, described on my website AVCHD-light (720p, as from many compact-stills) ..
done.
some Flips are supported by iMovie, which you can abuse as a converter tool.
but 'non video standard' (=read 'video' as 'in TV') formats, resolutions and codecs ...
a) manual conversion = less convenient
b) loss of 'quality', e.g. when you blow-up tiny 480x320/15fps into video..
FC/e is FC/pros lil' brother.. meant for a more.. adult workflow..
if you like to wrestle with multi-formats, stay with Windows/Magix/..
Windows=options, with a chance of getting lost
MacOs=convenience, with a chance of getting restricted -
Setting a transparent background
Is it possible to set a transparent background in Aperture 3? i.e. erase the background of a photo to plane white then setting the transparency for plane white. Attempting to make a transparent background to add the image to a photo.
r/
PatrickWelcome to the list. Make sure you read the [Help & Terms of Use|http://discussions.apple.com/help.jspa] section when you get a chance.
No its not possible. You'll need something like Gimp or PS for that. -
Setting the Border background color
Post Author: gravy
CA Forum: .NET
Hi,
Using the API I'm trying to set the Border background color to transparent but I can't. I want to set the background color to match what the designer does when you uncheck the Background option on the Border tab of a TextObjects properties.
Can anyone help?What release are your using?
do you want to set this dynamically, for one portlet or all. you may what to use
'Themes'
"Jorgeana" <[email protected]> wrote:
>
Does someone have a sample of setting the portlet border and background
color ?
I´m having problems using "setPortletBGColor" !! Tks -
Set the custom background images to default?
Is there any way to set the custom background image to default instead of manually changing the background image in the phone?
This was actually discussed some time ago. Please see this link.
http://www.voipintegration.com/software.html
See discussion here:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.1ddd4505 -
I belong to a graphic site dreamies.de and my images are disappearing from there since I right clicked on what I thought was set as desktop background. There was another entry under it that said block images from dreamies.de. That is the one that I clicked on by accident and no one knows how to reverse it. Does anyone here know how to reverse it? I was using firefox 3.6 beta 3 when this happened. I am now on firefox 12.
I already tried right-click the page, choose View Page Info, then click Permissions. The first item is the site-specific permission for images and you should be able to reset back to the default here. This did not work.
I also tried right-click View Page Info and click Media. Click the first image on the list and observe the Block Images checkbox above the preview at the bottom. Arrow down the list until you come to a site that is blocked and unblock it. There was no unblock just a delete, so I deleted it. This did not work either.
I know it is a firefox issue because the images are all there when I log in using Internet explorer, but on firefox there are many of my images missing.This is the question that I need an answer to:
I belong to a graphic site dreamies.de and my images are disappearing from there since I right clicked on what I thought was set as desktop background. There was another entry under it that said block images from dreamies.de. That is the one that I clicked on by accident and no one knows how to reverse it. Does anyone here know how to reverse it? I was using firefox 3.6 beta 3 when this happened. I am now on firefox 12.
I already tried right-click the page, choose View Page Info, then click Permissions. The first item is the site-specific permission for images and you should be able to reset back to the default here. This did not work.
I also tried right-click View Page Info and click Media. Click the first image on the list and observe the Block Images checkbox above the preview at the bottom. Arrow down the list until you come to a site that is blocked and unblock it. There was no unblock just a delete, so I deleted it. This did not work either.
I know it is a firefox issue because the images are all there when I log in using Internet explorer, but on firefox there are many of my images missing. -
[ANSWERED]Which terminals let you set a random background image?
Many terminals nowadays let you set a background image on the terminal itself.
Which terminals let you set a random background image from a directory or list of images? Also need to be able to have multiple terminals with different background images open, so having a script that moves around images won't work.
I like this because when you have lots of terminals open, you can associate each with their background image. Also if your background image isn't a tiled thing or a stylized gradient (such as a human, etc), it might look bad when duplicated all over the screen.
I could use transparency, but I don't like psuedo transparency, and real transparency comes with all sorts of problems. (For me at least.) I would still prefer having multiple background images though.
Konsole and eterm are the only two I know that can do this, but konsole is KDE, and eterm has no unicode support, is dead (I think), and is ugly.
Last edited by sokuban (2008-12-31 21:20:12)So now that time has passed and I'm on a clean new install, I decided to try out uxvrt again. The good news in that now I can type in it with scim. I have no clue how or why, but it means the greatest hurdle is gone.
I also even managed to get a good looking English font.
urxvt*font: xft:Monospace:pixelsize=12
Only problem is a readable east asian font. The default font is a mess and everything is squished together. If I explicitly select an east asian font, then there are huge spaces between each letter, even for english. So I find out this is a known bug, and I find a patched aur package for it, but the patch doesn't seem to make a difference.
I know urxvt lets you select a main font and a secondary font and so on. Maybe I did the syntax wrong. I tried both:
urxvt*font: xft:Monospace:pixelsize=16
urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
and
urxvt*font: xft:Monospace:pixelsize=16,urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
Neither of them worked. From what my understanding of what the man page says, the size of the cell is supposed to be based on the main font, but in both those cases the secondary font stretches the cells.
Can anybody reccomend fonts for east asian scripts that work well and show me your .Xdefaults ?
FAKE EDIT: I just thought of an idea, and it kinda works:
urxvt*font: xft:Monospace:pixelsize=16,xft:WenQuanYi Zen Hei:size=9:antialias=True
Now I get a readable font, but massive spacing issues between Chinese Characters.
EDIT: About the pixmaps, I got a script to randomly select and image and all is fine, but I can't seem to find a way to disable scaling. I can set the size of the picture by a percent, but it doesn't let me use decimals and it is impossible to get the exact resolution of the picture to display. (Unless I let it tile, but the pictures I am using aren't meant to be tiled.) Is there a way to either disable scaling, or set the urxvt size in pixels so I could make it exactly 640x480. The urxvt man page says that a scale of 1 disables scaling, but it seems to have no effect.
EDIT2: I just noticed I can't use scim now. I have no clue why, but I think compiling it with afterimage support breaks it.
EDIT3: I found out why scim was not working/working. I had to add this to my ~/.scim/global:
/SupportedUnicodeLocales = en_CA.UTF-8
I also got a script that works, kinda:
#!/bin/bash
image="$(ls /usr/local/share/cgs | sort -R | tail -1)"
urxvt -pixmap /usr/local/share/cgs/$image\;86x100
The only problem is that I don't know how to get urxvt -pixmap to keep the aspect ratio of the image. 86x100 is the closest it will let me get to the actual aspect ratio, but it is off slightly. Barely noticable. The man page says that propscale will do this, but it doesn't seem to work.
Either way, for now, I am just going to use 86x100.
Last edited by sokuban (2009-03-22 02:01:45) -
Setting the desktop background image via Powershell
UPDATE:
I found the solution that addressed my problem, which I posted in a post below. Keeping the original post for Internet historical reasons as I the hope this helps someone else later on in their search for a solution.
===============
I have Bing'ed and I have Google'd and I haven't found a solid answer to setting the desktop wallpaper programmically. I am trying to do this via PowerShell, but I would be happy for any other language flavor or application to work.
Below is the code I have tried to set the desktop background image. This has been scrounged from a few sources across the web. This solution works 25% of the time and I haven't figured out what the cause for success or failure of the execution. Or maybe
it's neither, but waiting for Explorer to refresh. The only way to see the change 100% is to log out and log back in.
I am running Windows 8.1 btw.
Thank you for looking.
Function Get-WallPaper()
$wp=Get-ItemProperty -path 'HKCU:\Control Panel\Desktop\' -name wallpaper
if(!$wp.WallPaper)
{ "Wall paper is not set" }
Else
{"Wall paper is set to $($wp.WallPaper)" }
Function Refresh-Explorer {
$code = @'
private static readonly IntPtr HWND_BROADCAST = new IntPtr(0xffff);
private const int WM_SETTINGCHANGE = 0x1a;
private const int SMTO_ABORTIFHUNG = 0x0002;
[System.Runtime.InteropServices.DllImport("user32.dll", SetLastError=true, CharSet=CharSet.Auto)]
static extern bool SendNotifyMessage(IntPtr hWnd, uint Msg, UIntPtr wParam,
IntPtr lParam);
[System.Runtime.InteropServices.DllImport("user32.dll", SetLastError = true)]
private static extern IntPtr SendMessageTimeout ( IntPtr hWnd, int Msg, IntPtr wParam, string lParam, uint fuFlags, uint uTimeout, IntPtr lpdwResult );
[System.Runtime.InteropServices.DllImport("Shell32.dll")]
private static extern int SHChangeNotify(int eventId, int flags, IntPtr item1, IntPtr item2);
public static void Refresh() {
SHChangeNotify(0x8000000, 0x1000, IntPtr.Zero, IntPtr.Zero);
SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, IntPtr.Zero, null, SMTO_ABORTIFHUNG, 100, IntPtr.Zero);
Add-Type -MemberDefinition $code -Namespace MyWinAPI -Name Explorer
[MyWinAPI.Explorer]::Refresh()
Function Set-WallPaper($Value)
echo "Setting background to: $value"
Refresh-Explorer
Set-ItemProperty -path 'HKCU:\Control Panel\Desktop\' -name wallpaper -value $value
rundll32.exe user32.dll, UpdatePerUserSystemParameters
#sleep 1
rundll32.exe user32.dll, UpdatePerUserSystemParameters
#sleep 1
rundll32.exe user32.dll, UpdatePerUserSystemParameters
#sleep 1
Refresh-Explorer
#Stop-Process -ProcessName explorer
NOTE: I left in a few commented out statements. I found that they do not offer any help in formulating a solution.
Thank you.Great news! I found the solution and all props and credit goes to
jsd1982 of the XKCD comic
forum from a post he made in 2007 and some deep search kung-fu Googling on my part. Here is the
direct link to the post.
This solution has worked for me 100% of the time on Windows 8. The only gotcha I found (minor detail) was when setting this process to run as a scheduled task, I had to run it as elevated privileges for the code to compile in memory. Running this function
from PowerShell at the command prompt was fine.
NOTE: The code below is a slight trimmed down version posted by jsd1982 to just set the desktop wallpaper. I removed the image fetching from the Internet and the color inversion.
# Credit to jsd1982
function Compile-Csharp ([string] $code, $FrameworkVersion="v2.0.50727",
[Array]$References)
# Get an instance of the CSharp code provider
$cp = new-object Microsoft.CSharp.CSharpCodeProvider
# Build up a compiler params object...
$framework = [System.IO.Path]::Combine($env:windir, "Microsoft.NET\Framework\$FrameWorkVersion")
$refs = new-object Collections.ArrayList
$refs.AddRange( @("${framework}\System.dll",
# "${mshhome}\System.Management.Automation.dll",
# "${mshhome}\System.Management.Automation.ConsoleHost.dll",
"${framework}\system.windows.forms.dll",
"${framework}\System.data.dll",
"${framework}\System.Drawing.dll",
"${framework}\System.Xml.dll"))
if ($references.Count -ge 1)
$refs.AddRange($References)
$cpar = New-Object System.CodeDom.Compiler.CompilerParameters
$cpar.GenerateInMemory = $true
$cpar.GenerateExecutable = $false
$cpar.CompilerOptions = "/unsafe";
$cpar.OutputAssembly = "custom"
$cpar.ReferencedAssemblies.AddRange($refs)
$cr = $cp.CompileAssemblyFromSource($cpar, $code)
if ( $cr.Errors.Count)
$codeLines = $code.Split("`n");
foreach ($ce in $cr.Errors)
write-host "Error: $($codeLines[$($ce.Line - 1)])"
$ce |out-default
Throw "INVALID DATA: Errors encountered while compiling code"
[System.Reflection.Assembly]::LoadWithPartialName("System.Drawing") > $null
[System.Reflection.Assembly]::LoadWithPartialName("System.Runtime") > $null
# C# code to post to wallpaper
$code = @'
using System;
using System.Drawing;
using System.Drawing.Imaging;
using System.Runtime.InteropServices;
using System.IO;
using System.Net;
using Microsoft.Win32;
namespace test
public class Wallpaper
const int SPI_SETDESKWALLPAPER = 20 ;
const int SPIF_UPDATEINIFILE = 0x01;
const int SPIF_SENDWININICHANGE = 0x02;
[DllImport("user32.dll", CharSet=CharSet.Auto)]
static extern int SystemParametersInfo (int uAction , int uParam , string lpvParam , int fuWinIni) ;
public static void SetWallpaper(string uri)
System.IO.Stream s = new WebClient().OpenRead(uri);
Image img = System.Drawing.Image.FromStream(s);
Bitmap copy = new Bitmap(img.Width, img.Height);
Graphics g = Graphics.FromImage(copy);
Rectangle rect = new Rectangle(0, 0, img.Width, img.Height);
g.DrawImage(img, rect, 0, 0, img.Width, img.Height, GraphicsUnit.Pixel);
g.Dispose();
img.Dispose();
// Save to a temp file:
string tempPath = Path.Combine(Path.GetTempPath(), "wallpaper.bmp");
copy.Save(tempPath, System.Drawing.Imaging.ImageFormat.Bmp);
RegistryKey key = Registry.CurrentUser.OpenSubKey( @"Control Panel\Desktop", true ) ;
key.SetValue(@"WallpaperStyle", 1.ToString( ) ) ;
key.SetValue(@"TileWallpaper", 0.ToString( ) ) ;
SystemParametersInfo( SPI_SETDESKWALLPAPER,
0,
tempPath,
SPIF_UPDATEINIFILE | SPIF_SENDWININICHANGE );
function Set-Wallpaper([string] $imgurl)
compile-CSharp $code
[test.Wallpaper]::SetWallpaper($imgurl) -
How do I set a Finder background for all users?
I want to set a background in Finder for a folder hosted on a server, and I want all users who connect to that folder to see the background (and, necessarily, force them into Icon view for that folder). Is there a way to do this? Server is running 10.5.8, clients are running a mix from 10.6.7 to 10.7.1.
But I dont know how to set a default website name that appears at the top of EVERY page. Can you help?
You cannot set a default name for your webpage.
Each page is unique.
But you can make a default page and duplicate it.
Maybe you are looking for
-
When Trying to Install Labview 8.6.1 on Windows 7 Get Error Code -12
When Trying to Install Labview Deveopment Suite 8.6.1 on Windows 7 Get " *** Error: Windows SDK Function Returned an Error (Error Code -12)" I assume a compatability issue will Labview installer and Windows 7. Is there a work arround?
-
Email attachment to be saved to a mail or mac folder?
Why can't we have a simple rule that allows email attachment to be saved to a mail or mac folder? This was a simple rule in outlook and the real true feature I miss about Outlook. I know people will say apple scripts but I am not a coder and the op
-
Ovi Suite 3.0.0.284 crashes all the time during co...
Ovi Suite 3.0.0.284 crashes all the time during contact sync Workaround for this issue: Please go to Tools>Options>Contacts and uncheck box under Sync with your Nokia account in Ovi.com - Sync now Hopefully this will solve your contact sync proble
-
I have some favorite add-ons that are not yet compatible with version 4. I would like to go back to 3.6 without loosing all of my setup.
-
Error send questionnaire in srm Ros
Dear customizer, I have implemented the supplier self registration,I have a problem when the supplier send questionnaire.This questionnaire doesn't appear in the prescreen,even if it seem sended. Thank for your help.