Setting up a Connection between Devices

I was wondering how to set up a connection between 2 or more Devices in Flash Lite and getting the IP addresses of these devices. Can anyone help me with this please?

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04ebfdc-9916-2a10-2c82-fc057c8ced1c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6075d293-291b-2a10-7fbb-b827b28fd9b0
Hope it helps

Similar Messages

  • Setting order of connectivity between devices for Internet?

    I have my macbook pro setup wth Access to internet via the airport AND also setup to use DUN via bluetooth.
    I would like it to only goto the DUN if the airport is not availiable. Right now, I get the message that it con not connect to the device... then after a pause, about 30 seconds the interent goes live via the airort, I would like this reversed. Any Ideas on how to set this up?

    Just go to the Network preference pane and have it show the "network port configurations". Here you can check which ones you want to use and which you don't You can also grab them, by the name, not the checkbox and drag them up and down. The system will search for connections starting from the top one and go to the next one if it can't locate a connection from the one above it and so on until it either finds a connection, or gives up and informs you that it cannot connect.
    EDIT: someone beat me to it!!

  • How to set up internet connection between MacBook Pro and an old eMac?

    I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
    I'd like to use it with screenrecycler and it needs a network connection.
    How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
    Thank you very much

    Hello,
    First, are you using Wifi for Internet on the MBP?
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
    In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
    Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

  • How do I setup MTP connection between Galaxy S2 and arch.

    I am having difficulty in setting up a connection between my Galaxy S2 and arch PC.
    I have installed libmtp and have run 'mtp-detect ' command in terminal this is the output I get :
    [ram@Arch ~]$ mtp-detect
    libmtp version: 1.1.1
    Listing raw device(s)
    Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7510/Galaxy Tab 10.1/S2.
       Found 1 device(s):
       Samsung: GT-P7510/Galaxy Tab 10.1/S2 (04e8:6860) @ bus 2, dev 3
    Attempting to connect device(s)
    PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
    LIBMTP libusb: Attempt to reset device
    LIBMTP PANIC: failed to open session on second attempt
    Unable to open raw device 0
    Any Ideas????
    I have searched Google & of course the forums and no good explanation or even  a hint of solution is avalable.

    praveenthivari wrote:
    I have found a working solution for this.
    Thanks to following forum threads:
    http://androidforums.com/samsung-galaxy … alaxy.html
    The process is longer but works fine to be able to mount the phone in USB mode.
    1) Go to 'Settings' > 'Wireless and network' > USB utilities  and press 'Connect Storage to PC'
    2) A pop up will appear asking you to connect USB cable.
    3) On connecting it will ask whether to mount as USB storage format. Click 'Yes'.
    4) Done. It should now mount in USB mode.
    It requires a bit of work but am satisfied that atleast SOME solution exists.
    Any better solution?
    Edit: I have found another site explaining this:
    http://www.computerandyou.net/2012/01/h … -on-linux/
    Unfortunately this is not an option for those of us using the Galaxy Tab 10.1, as it does not have the USB utilities option in the Settings menu.  Shame on Samsung for making their devices different than any other Android device.  MTP works great on my ASUS transformer, but not on my Galaxy Tab.

  • SSO Connection Between Netweaver CE 7.2 and MDM 7.1

    Hi ,
    I am trying to set up SSO connection between Netweaver CE 7.2 and MDM 7.1 systems in our landscape.
    But Iam not finding the MDM template in Netweaver CE to create the MDM system in System configuration tab of CE.
    Please help me on how to go about to create the SSO connection between CE and MDM system.
    Regards,
    Anand V

    Hi Shiv,
    The MDM content business package  MDM JAVA WD FRAMEWORK 7.1 7.11 and  MDM WEB SERVICES_RT 7.1 7.11 based on Note 1471326 have been Installed on CE but the restart was not taken.
    Is the frestart necessary to get the MDM template?
    Regards,
    Anand V

  • Problem: Hotsync error message "The connection between your device and the desktop could not be establisthed."

    When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed.  Please check your setup and try again."
    Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
    Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time.  HotSync Manager will open the port when it becomes available."
    Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4.  I cannot change it to anything else.
    Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
    Tried rebooting both laptop and Palm TX.  Still can't Hotsync.
    Operating system: Windows XP Pro
    Post relates to: Palm TX

    You are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
    Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
    I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's.

  • Setting up a https connection between SAP CRM and genesys gplus adapter

    Hello All-
    We are integrating SAP CRM with genesys mysap gplus adapter. We are struck in setting up a https connection between sap and gplus adapter.
    Can anyone here help me out in this like how to get the SSL Protocol, keystore, keystore password,truststore and truststore password.
    Information abt Adapters server certificate. Do we need to configure the adapter for the proxy also?
    Any additional comment will help. Thanks in advance!

    Hello Vinod,
    Please refer the following OSS notes 564085.
    Please reward if helpful.
    regards,
    Muralidhar Prasad.C

  • I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your mac using account ***

    I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
    Does anybody have suggestions as to why this is the case?

    Understanding Home Sharing - Support - Apple
    Hope this helps.

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • Please help me to find my iPad and iPhone 5C. I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends".

    Dear Apple,
    Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.

    Hey there thaovy309,
    Welcome to Apple Support Communities.
    The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
    If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
    Take care,
    -Jason

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • TS4003 everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?

    everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?

    You cannot connect to iCloud.com from an iOS device, you can only connect from a computer. You can access any of the data in your iCloud account from the appropriate apps on your device (mail, contacts, calendars etc)

  • I cannot set up a blue tooth connection between my apple ipod and phone

    I cannot set up a bluetooth connection between my apple ipod touch and an external speaker wirelessly. The speaker is a boombar and although I have been able to set  it up successfully between the speaker and my iphone, I have not been able to set it up with the ipod.  Please , any advice?

    Unpair the spear from the phone.
    Reset the speaker.
    Try with the Mac again.

  • How to set connection between oracle forms and DB?

    I have installed win xp,
    oracle database 10g in c drive ,
    oracle forms and reports 10g in d drive ,
    how do i set the connection between forms and DB ?
    i know its an old question but i am very new to this !
    thanks in advance.

    You didn't mention the versions or whether you are using Developer Suite or Application Server. I guess it really doesn't matter in this case, but please provide complete information in the future.
    In order to connect the F/R home to a db you will need to make the appropriate configuration entries in tnsnames.ora found in the F/R home (\NETWORK\ADMIN). The entry you add will be similar to the one found in the tnsnames.ora for the db which is found in a similar directory in the db home. The entry will look something like this:
    ORCL =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = myMachine)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = myMachine)
      )

  • When i open iCloud on my ios device i get an error SSL error had occurred and a secure connection to the server cannot be made.  my photos are not syncing between devices when iam hooked up to wifi.

    When I open iCloud on my iphone 4s I get, an SSL error has occurred and a secure connection to the server cannot be made.  Also my photo stream is not streaming photos between devices when I am hooked up to WI FI. 

    When I open iCloud on my iphone 4s I get, an SSL error has occurred and a secure connection to the server cannot be made.  Also my photo stream is not streaming photos between devices when I am hooked up to WI FI. 

Maybe you are looking for