Setting up a few more things 100%

Im stuck at 100% everytime I update and I have to roll back previous version of windows every single time, how can I stop this from happening again?

Hi RocketSashimi,
What is the current situation?
If the new build still could not be installed, please uninstall any 3rd-party Antivirus software if installed, after that, check if we could install the new build again. A similar thread for reference:
Stuck at "Setting up a few more things
100%" when upgrading to build 9860
Or
We may consider to do a clean install with the newly Windows 10 9879 ISO, which is download available from the following link:
Download Windows Technical Preview November Update
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10
Enterprise version:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Stuck at "Setting up a few more things 100%" when upgrading to build 9860

Hello everyone,
I'm currently running Windows 10 Technical Preview, installed from the setup.exe (so not from a bootable disc/USB-stick), which does work better than I expected. Of course there are many bugs and other problems under the hood, but so far I haven't found
big issues so far.
Unfortunately, when I try to install the latest build - build 9860 - it keeps hanging at 'Setting up a few more things 100%'. That's really strange, since '100%' should mean it's actually done. I've done about five attempts, none of them resulted in anything
better. After a few attempts, I thought I had to install some updates through Windows Update first, so I did. But after that, installing build 9860 still didn't want to install properly.
Anyone who can help me with this?
Just some key information about the notebook I'm using, in it's necessary:
ASUS N56VB-S4061H
2.4 GHz quad Intel Core i7-3630QM
6 GB RAM
NVIDIA GeForce GT740M

Hi DutchTom18,
You can try uninstall anti-virus software that has been installed after installation of Windows 10.
Alex Zhao
TechNet Community Support

Few more things in automatic scheduling

does manage scheduler has all the privilege,,,,,,,means create job,,,,execute,,,,and alter,,,or we still provide them with these privileges
what does it mean,,,,,jobs can be defined with service affinity(they should run on a specific service)as opposed to an instance affinity(they should run on specific instance),,,,,,,,,, i read this line in ocp administration II study guide by doug stuns, tim butterbaugh from sybex
and the oracle press book says,,,,The service that a job class belongs to specifies that the jobs in this class will have affinity to the
particular service specified. In an Oracle Real Application Clusters (RAC) environment, this
means that the jobs in this class will only run on those database instances that are assigned to the
specific service. To balance the load on your system and for better performance, you can specify
the Service Name of the service where you want a job to run.
If no service is specified, the job class will have no service affinity and any one of the database
instances within the cluster might run the job. You can only specify service affinity for a job
class, not for individual jobs.
what does they means by service thing here,,,,and how do we specify it? or use it?
and does resource_consumer_grp and Service name parameter in job class definition are mutual exclusive?or not

what does they means by service thing here,,,,and how do we specify it? or use it?
Any application running in Oracle RAC clusterware is considered as a service. What is a service in the windows,its kinda same. If its a part of RAC and an application and running,its service.
Read from here about services,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/mgmt_db.htm#sthref2266
If you don't know RAC yet, better is to leave it.Its the core of RAC if you ask me.
does resource_consumer_grp and Service name parameter in job class definition are mutual exclusive?or not
Did you check in the docs for the same?
HTH
Aman....

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

I bought a MacBook Pro Retina a few months ago. I do not understand why I have more than 100 GB of Others in my storage? Can anyone please explain?

My MacBook Pro with Retina display suddenly gave me a message when I boot up ie 'Your startup Disk is full' then after using a few more times, the screen suddenly become frozen white. Upon getting help, I managed to delete some files but when I checked the Storage space, the largest occupied space was orange color, named 'Others' which is more than 100 GB out of the total 120 GB!! I am surprised and do not understand what 'Others' mean. It is definitely not Audio, Video, Pictures, documents etc It is not mail too. If anyone can tell me what 'Others' in storage mean and how to see the contents of 'Others' so that I can delete those irrelevant files. Any advice and guidance is very much appreciated. Thanking you in anticipation of your early reply.
Joe

"Other" includes everything that is not audio, movies, photos, apps and backups. In other words it includes the OS, mail, documents... See http://pondini.org/OSX/LionStorage.html and What is "Other" and What Can I Do About It?- Apple Support Communities https://discussions.apple.com/docs/DOC-5142
To clear disk space see https://discussions.apple.com/message/24012341#24012341 (in addition to Body's excellent document).

Please help, after is downloaded IOS 7 I lost my Pages App and a few more and also I now have restriction set on please help

Please help, after is downloaded IOS 7 I lost my Pages App and a few more and also I now have restriction set on please help

If you can't reach the person that sold it to you, you essentially have an iBrick.
You are encountering Activation Lock, which cannot be bypassed.
You may want to just turn the phone over to the police as it's nothing more to you than a paperweight and may be stolen.
~Lyssa

I would like to know why ASC removed my comments and pleads saying they were rantings? Maybe so, but if you received more than 100 emails a day, you would too! I have done all the right things to not receive these emails but to no avail.Can someone help?

For months now I have been puting up with receiving emails generated from Apple Support Communities - sometimes more than 100 a day. Needless to say I am angry. I have done everything I have been told to do so as not to receive them BUT they still keep on coming all day and all night. It is messing up my sytem and taking too much time out of my busy day. When I responded to another person's same problem, I immediately received an email from Apple Support Communities telling me that they have removed my responses from Apple Support Communities! This, after only one day, when I have been writing and requesting help to have these emails stop from cloging up my email! Of course I am upset and now even more.
Please, if someone knows how to stop these emails from entering my box, I would really appreciate hearing. In the meantime I continue to delete one by one.Linda166

At the top of this page, click your name, where yours says "Welcome, linda166":
Click the link "Manage email notifications":
Click the checkbox at the upper right - to the right of where it says "Date" - this selects all of the messages on the page:
Click the button "Remove selected notifications":
Click "Next" and repeat for each page. You may have less than 213 pages.

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Liquify shows jagged image when liquifying at more than 100%

Hello
Well, that`s the problem. I recently changed my video card and liquify started working a different way. The video card I have now is ATI RADEON HD 5850 DDR5, 1gb. And the computer I have is:
QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
Motherboard: DX58SO (1 PCI, 1 PCI-E x4, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
RAM: 6 GB DDR3-1333 DDR3 SDRAM
Video Card: ATI Radeon HD 5800 Series (1024 MB)
Hard Drive: 1TB western digital, 4 partitions, 73gb free space in total and 13gb free on C Drive.
Windows 7 ultimate 64 bit.
Photoshop CS6.
This are the things that happened after installing the new Video Card:
- I used to work with the PUSH LEFT tool on Brush Pressure 1. Now, to achieve the same effect (the same kind of pressure), I have to use a higher number, like 6 o 7.
- When liquifying the image at more than 100%, the image gets jagged. I can't do any precise work like this, because I'm not seeing the image correctly, the pixels are shifted, the lines jagged. If I go back to 100% the image looks normal again.
I already tryied on the Preference panel to change the options of the video card but the problem persists. The way I have it set up now is this:
I need to do some precise works on small areas of the image so this is quie a problem for me. Any suggestions, ideas?
THANKS A LOT IN ADVANCE!
Margaret.

Could you please post a screenshot to illustrate the issue?
What is the GPU driver?

A few more FCP X Bugs/Annoyances

Hello all,
I cannot thank the help and expertise from some of the members in the FCP X support community. Luis Sequeira and Tom Wolsky you guys are part of the reason why I am persevering with FCP X and am finding it to be the future of editing despite the many flaws it has. I was glad to find out I wasn't just one of a few who found some of the bugs and inconsistencies to be slightly more than an annoyance. Here are a few more that i've noticed and am wondering if anyone has found out why these issues exist and would care to add upon:
This one is for Macbook FCP X users. I don't have this problem on my tower or my 27" iMac so I am led to believe this is a deliberate (althrough strange and unwise) GUI design change from Apple. When I open up my color board on my 13" Macpro, I see my color board, exposure and saturation control just like I do on my desktops. I do not however, see the percentage change view/controls underneath. I cannot scroll down further, all I have to play with is the respective color, saturation and exposure "board" leaving me to use my eyes as my only trusted gauge for correction/change. Here's an image of what I see...
Notice no percentage gauge?
Here's another issue I have not been able to find a workaround for despite trying usual and predictable avenues in my attempts. It's not a huge deal, but being a keyboard shortcut junky, I find it annoying that I cannot press Command + E to export with my default settings on my macbook. The shortcut is not visible in the menu or when I hover my curser over the icon. Naturally, I went into my command editor to see whether i'd have to edit or completely create this shortcut on my own. The shortcut is definately still the same in the comman editor, but still no avail. I've input the keys to manually create this shortcut, still the same.
Here is what I see:
No matter what I do, when I press Command + E (I make sure i'm in the timeline) the shortcut doesn't work and I hear the sound that occurs when an incorrect or unvailable command/action occurs. Not a huge deal but still need to know if this is a legit bug or if it was intentional for laptop owners for some strange unidentifiable reason. I'm wondering if any other Macbook users are encountering the same problem.
I am about to mention these issues as well as a few others in hopes they can address them in future updates but wanted other peoples take on them. These aren't bugs as much as things I think would make more sense if corrected or improved upon:
Pressing CMD + 6 to open AND CLOSE the color board to make color adjustments. Once i am done making my necessary color/exposure adjustments, why can't i close this window with the same shortcut i used to open it? I can open the color board with CMD+ 6 but cannot close it with the same keyboard shortcut command. Same with CMD + 8 for audio enhancements, I can open the audio enhancements window with this shortcut but cannot close it with this shortcut. I have to close the entire inspector with the keyboard shortcut cmd 4 to close the window. Seems very counter intuitive and for short term projects isn't that big of an issue (like I mentioned i'm a keyboard shortcut fanatic), but becomes very annoying for paid, commercial work (which i've become accustomed to using CS6 for). When i work on my laptop I keep the inspector open when I need to maximize viewer space and would like to be able to have the color board close as conveniently as it opens without having to press cmd 4 to close inspector. Not that big of a deal but would like to see this fixed, wanted other people's thoughts?
Thanks again for your help, the transition to FCP X for things other than Facebook and short Instagram vids is coming about slowly but surely...
Anthony

Pull down the separator bar at the bottom of the color board to create more space for the percentages.
The color board and audio enhancements are parts of the inspector. You close the inspector with Cmd-4.
Cmd-E is the default export setting. It's assignable to any preset or custom export setting. Open Destination preferences, right-click on the setting you want and select make default.

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

How do I make the Shuffle Setting on my iTunes More Random?

Hi,
I've just recently got my iPod classic (finally) and I love it! But, I have a question about iTunes. My question is: How do I get the shuffle setting in my iTunes to be more random? I have "The iPod Book" by Scott Kelby and looked this up, but I have the fourth edition, and so the picture for the iTunes > Preferences > Playback > picture is not the same as mine. I can't find the bar to slide the shuffle setting to more random or as Apple puts it " least likely". Not that it's the most important topic in the world, but I already have a total of almost 1500 songs and I'm still having to skip because I have music from the same album or the same song(s) popping up about 4 tracks later. This is really frustrating since part of the reason I bought it was to listen to ALL my music shuffled, but instead I spend more time switching through my music to finally get to something different. Does anybody know how to do this with the new iTunes version? Also to clarify, I have already searched through the automatic help that's offered in iTunes and nothing is coming up that helps me, and I've tried searching Support here on the website and ll I get is how to either turn shuffle on or tech support for having an iPod shuffle, not how to make it more random

I took a play list of 3500 songs and sorted first by album name and then by track.
Is there some reason you think you needed to sort by Album first?
As soon as you sort on any other column, iTunes doesn't care you sorted this first. It is now ignored.
I don'dt know if we have a semantics problem
We don't.
Sorting by Album first then sorting by Track # sorts by Track # and Album name as the secondary sort.
You don't need to first sort by Album.
THIS DOES NOTHING!
When you sort by Track #...
Abbey Road -Track 1
Americana - Track 1
Anthology - Track 1
Abbey Road -Track 2
Americana - Track 2
Anthology - Track 2
Therefore both the primary and secondary sorts mean something.
Correct.
You are not selecting the secondary sort. Sorting by Track #, the secondary sort is always Album.
Try this.
Sort by Artist then sort by Track #.
It is now sorted as above.
Sorting by 1 column then another does absolutely nothong (except take a few more mouseclicks).
I rest my case.

Outofmemory while creating a new object of file with size more than 100 MB

I have created an application which generates a report by getting the data from our archived files (.zip file).By the time, the application is reaching a file with size more than 100 mb, it is running out fo memory while creating the object of that particular file. Can some one help me by tellin if there id way to resolve this issue?
Thanks in advance

If you're getting OutOfMemoryError, the simplest thing to try is to give the VM more memory at startup. For Sun's VM, I believe the default is 64 MB. You can increase this by using the -X args that control the heap size. For example: java -Xms128m -Xmx256m ... etc. ... This says start with 128 MB of heap, and allow it to grow up to 256 MB.
One thing to consider, though, is do you need that much stuff in memory at once? A more intelligent approach might be to unpack the archive to the file system, and then read a file at a time or a line at a time or a whatever at a time is appropriate for the processing you need to do.

More than 100 items in Form or Page

Can Apex allow more than 100 items in a page? I am getting message like
'Item count exceeds maximum of 100'.
Even data entered in the form for extra items over 100 is not posted to database.
Pl help or suggest any workaround.
I am using HTMLDB 2.0

Example:
1. Create the test data
CREATE TABLE "TEST_TABLE1"
("KEY1" NUMBER(10) NOT NULL ,
"DESC" VARCHAR2(24) ,
"OPTION1" VARCHAR2(10) ,
"OPTION2" VARCHAR2(10) ,
"OPTION3" VARCHAR2(10) ,
"OPTION4" VARCHAR2(10) ,
"OPTION5" VARCHAR2(10) ,
"OPTION6" VARCHAR2(10) ,
"OPTION7" VARCHAR2(10) ,
"OPTION8" VARCHAR2(10) ,
"OPTION9" VARCHAR2(10) ,
"OPTION10" VARCHAR2(10) ,
"OPTION11" VARCHAR2(10) ) ;
INSERT INTO"TEST_TABLE1"
VALUES (1,'Row 1','Red','Blue','Green','Yellow','Orange','Black','Ivory','Purple','White','Lime','Gray');
INSERT INTO"TEST_TABLE1"
VALUES (2,'Row 2','Blue','Green','Yellow','Orange','Black','Ivory','Purple','White','Lime','Gray','Red');
INSERT INTO"TEST_TABLE1"
VALUES (3,'Row 3','Green','Yellow','Orange','Black','Ivory','Purple','White','Lime','Gray','Red','Blue');
INSERT INTO"TEST_TABLE1"
VALUES (4,'Row 4','Yellow','Orange','Black','Ivory','Purple','White','Lime','Gray','Red','Blue','Green');
INSERT INTO"TEST_TABLE1"
VALUES (5,'Row 5','Orange','Black','Ivory','Purple','White','Lime','Gray','Red','Blue','Green','Yellow');
INSERT INTO"TEST_TABLE1"
VALUES (6,'Row 6','Black','Ivory','Purple','White','Lime','Gray','Red','Blue','Green','Yellow','Orange');
INSERT INTO"TEST_TABLE1"
VALUES (7,'Row 7','Ivory','Purple','White','Lime','Gray','Red','Blue','Green','Yellow','Orange','Black');
INSERT INTO"TEST_TABLE1"
VALUES (8,'Row 8','Purple','White','Lime','Gray','Red','Blue','Green','Yellow','Orange','Black','Ivory');
INSERT INTO"TEST_TABLE1"
VALUES (9,'Row 9','White','Lime','Gray','Red','Blue','Green','Yellow','Orange','Black','Ivory','Purple');
INSERT INTO"TEST_TABLE1"
VALUES (10,'Row 10','Lime','Gray','Red','Blue','Green','Yellow','Orange','Black','Ivory','Purple','White');
2. Create a blank page.
3. Create a report region with the following query.
select
"DESC",
htmldb_item.hidden(1,KEY1) Key1,
htmldb_item.text(2,OPTION1,10,10) OPTION1,
htmldb_item.text(3,OPTION2,10,10) OPTION2,
htmldb_item.text(4,OPTION3,10,10) OPTION3,
htmldb_item.text(5,OPTION4,10,10) OPTION4,
htmldb_item.text(6,OPTION5,10,10) OPTION5,
htmldb_item.text(7,OPTION6,10,10) OPTION6,
htmldb_item.text(8,OPTION7,10,10) OPTION7,
htmldb_item.text(9,OPTION8,10,10) OPTION8,
htmldb_item.text(10,OPTION9,10,10) OPTION9,
htmldb_item.text(11,OPTION10,10,10) OPTION10,
htmldb_item.text(12,OPTION11,10,10) OPTION11
from test_table1
4. create a save button which branches to the same page
5. Create a page process that executes the following SQL when the button is pressed:
-- update Record
for i in 1..htmldb_application.g_f01.count
loop
update test_table1
set option1 = replace(htmldb_application.g_f02(i),'%'||'null%',NULL),
option2 = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
option3 = replace(htmldb_application.g_f04(i),'%'||'null%',NULL),
option4 = replace(htmldb_application.g_f05(i),'%'||'null%',NULL),
option5 = replace(htmldb_application.g_f06(i),'%'||'null%',NULL),
option6 = replace(htmldb_application.g_f07(i),'%'||'null%',NULL),
option7 = replace(htmldb_application.g_f08(i),'%'||'null%',NULL),
option8 = replace(htmldb_application.g_f09(i),'%'||'null%',NULL),
option9 = replace(htmldb_application.g_f10(i),'%'||'null%',NULL),
option10 = replace(htmldb_application.g_f11(i),'%'||'null%',NULL)
option11 = replace(htmldb_application.g_f12(i),'%'||'null%',NULL)
where key1 = htmldb_application.g_f01(i);
end loop;
6. Run the page (This page has 110 items)
If you have a table with more than 100 fields, you can try something like this:
Select 1, apex_item.text(1,field1,10,10),
apex_item.text(2,field2,10,10),
union all
Select 2, apex_item.text(1,field11,10,10),
apex_item.text(2,field12,10,10),
, field2, field3, field4, field5

Slow script warning when prompt choice list has more than 100 elements

Hi,
Has anyone experienced this issue in Internet Explorer version 7 and above? If the prompt has more than 100 elements (my current use-case), the prompt does not get rendered and I get the slow/busy script warning in Internet Explorer. I have not experienced this in Firefox or Chrome.
Any help is appreciated
OBIEE 11.1.1.5

Thanks you, friends!
That to resolve my issue, i made next things:
1) turn off a limit items for my list
2) used SPQuery.ListItemCollectionPosition
property,
3) and corrected little mistake in my CAML Query.
May be a punkt #2 will be enough, don't you :)
from MSDN forum...

Setting up a few more things 100%

Similar Messages

Maybe you are looking for