Setting up a password for a switch web interface?

Hi,
I am trying to figure out how to set up a username/password for this switch I have.
it is a: Cisco WS-C2924M-XL
It seems to be easy but I couldn't find out how to do it so far.
Any help would be appreciated.. i just started working with this. thanks!

Hi!
Are you trying to enable and set username/password for accessing switch through the web-interface? I hope I understood you correctly.
Firstly you need to enable the switch for web-interface.
Enter this command --> ip http-server
Then you can login using the username [admin] and the enable password.
If you want to set some other username for this purpose, then enter this command --> username
Then you can login using the username and the enable password. By default only level 15 access is enabled for the web-interface.
For a lil more have a look at the following URL --> http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a0080178a51.shtml#local
Hope this helps...
Regards,
AbhisheK
Please rate all helpful posts!!!

Similar Messages

  • Long story short i need to set up a password for my links...

    long story short i need to set up a password for my linksys wireless router... i tried go to linksys' website link  i went ahead and set up a password using instructions from the link above...went to http://192.168.1.1/...clicked on admin tab and set up password... to test out my password i turned on/off my wireless connection on my macbook. when i turned it back on and selected the linksys wireless connection from the dropdown menu on my macbook it did NOT prompt me for a password? what am i doing wrong? why isnt it asking me for a password?
    Message Edited by OnnagokorO on 11-27-2007 11:53 PM

    The password you have changed is the password which protects the access to the web interface of the router. In other words, you must know this password to make changes to the configuration of the router. It is not the encryption key for wireless security. Wireless security is configured on the Wireless Security tab.
    For some more background see here.

  • How set  UserName and Password for HTTP Basic Authentication for a servlet

    Hi..
    How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
    Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
    But i dont know how do it in JBOSS..
    I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
    Thank u

    Hi Raj,
    You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
    Store the user information in a database table and check the username and password when the user enters it.
    You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
      CASE sy-ucomm.
        WHEN 'BACK'.
          LEAVE PROGRAM.
        WHEN <fcode for submit>.
          SELECT SINGLE uname pwd
           FROM <DB table>
           INTO (user, pass)
           WHERE username = user AND
                   password = passwd.
          IF sy-subrc = 0.
    <Go to next screen for further processing>
          ELSE.
    <Display Error message and exit>
          ENDIF.
      ENDCASE.
    Regards,
    Amit
    Message was edited by:
            Amit Kumar

  • My laptop (HP Pavilion) will not allow me to upgrade or download Firefox without logging in as Administrator, and I don't recall ever setting up a password for Administrator...I'm the only user of the laptop. How can I get around this?

    I was trying to upgrade to the newest version of Firefox, and when I downloaded it, and clicked on run, it took me to a login box, where I had to choose whether to continue as current user or login as Administrator. When I clicked on continue as current user, nothing happened. When I tried logging on as Administrator, I used all the passwords I could think of that I use and nothing was accepted. Id on't recall ever setting up a password for Adminstrator on this computer, so I don't know what to do. I even deleted the older version of Firefox thinking that might help, but it didn't work either, and now I don't even have that! Help!

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • Help!!!!!! OS X wants to use the "local items" keychain. Please enter password. I have tried every password that I know of. Nothing works! I haven't even set up a password for this

    Help!!!!!! OS X wants to use the "local items" keychain. Please enter password. I have tried every password that I know of. Nothing works! I haven't even set up a password for this

  • HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    capriz wrote:
    i have just updated my old 3GS ...
    To what... iOS 7 is Not supported on the 3 GS

  • Setting Up A Password for Mac Mini

    Hello
    Due to Lion causing an issue with my wifi I had to downgrade to Snow Leopard which meant all my settings  etc were changed.  How do I set up a password for changing things on my computer and locking up  after changes
    Thank you
    rachealfromva

    Try powering it down, & if they/you didn't setup Firmware Protection Password, or FileVault, then try this...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • HT1316 i have set up a password for my iphone 3gs apparantly i forgot the password..what's the redemy?HELP!

    i have set up a password for my iphone 3gs apparantly i forgot the password..what's the redemy?HELP!

    Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
    I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
    So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
    http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

  • I have set a strong password for my iPhone 5s, now I want to get rid of it and set a numeric 4 digit password. How to do that ??

    I have set a strong password for my iPhone 5s, now I want to get rid of it and set a numeric 4 digit password. How to do that ??

    go to settings>general>passcode lock and "enable simple passcode"

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • Setting up a password for my wireless internet

    We have a linksys wireless router I believe, (and macbooks) and our wireless internet that both my roommate and I use is not secured...ie: anyone can connect to it. To prevent my neighbors in the apartments and buildings around us I would like to set up a password for my roommate and I for our wireless. I have no idea how to do this. Can someone tell me the steps or whatever I need to do?
    Thanks!

    You do this in the router's configuration. Most LinkSys routers can be accessed through your browser by entering the router's access address into your browser's address bar. For example, http://192.168.0.xxx, where xxx is the last node of the router's IP address. You will find this in the router's user manual in a section on configuring from a browser.
    Once into the configuration pages look for a section on security. Choose WPA2 security (do not use WEP) and set your password. For additional protection you can also set up a "private" network in which you enter the MAC addresses of only the computers you will allow access. Even if someone hacks your password they will not be able to access your network unless you list their MAC address in the router's private network configuration.

  • I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it?

    I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
    Thanks.

    Hey Lori,
    You can set or change the password for an Apple ID by following the steps in this article -
    Apple ID: Changing your password - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • How to make a form for input in web interface builder

    Hi expert:
        How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to  draw lines and checkboxes . Thanks in advance.
    Allen

    WAD:
    Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
    You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
    Query Designer:
    Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
    This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
    Srikant

  • How do I set an exclusive password for the iCloud settings in my Mac at work?

    Here's the thing:
    I want to have my computer at work (MacPro) synched with iCloud (all my contacts and bookmarks). But to do and still feel safe that no one else would open System Preferences and mess up with the iCloud settings (for example, turning on the photo sharing or callendars, wich are very private). I would like to know if there's a way to set an exclusive password (not only the system password) for this area of the System Preferences.

    I suggest you post your question on an MS Office forum since it's their software you're having issues with.

  • Can I set up a password for when renting movies from my Apple TV without having to sign out?

    Can I set up a password when renting movies from my Apple TV without having to sign out?

    Is there an issue just signing out?  It's a chore entering itunes store password sometimes I agree but there's no way to set a local password on AppleTV - though it's a good idea as you could have a simpler one than for itunes store.
    Ordinarily I enter my password for rentals though AppleTV ususally asks if I want it to remember it automatically.  If you sign out and sign back in you should get the option. 

Maybe you are looking for

  • XML file to B1 Sales Quotaion

    hello, I am trying to insert a sales quotation in XML file format into SAP B1. In the message log i get an error : Value too long in property 'CardCode' of 'Document' every time i use an Item code or a card code containing Hebrew characters , i get g

  • Refresh browser causes to increment results

    Hi, I have a servlet that is using a database to query results from a survey. The survey has 3 questions and each one of them has 4 possible answers. The query runs fine and displays in the web browser, but once I do a refresh some of the data increm

  • In Mountain Lion how to keep Dashboard from opening each time awakening from sleep?

    Every time awakening from sleep and/or screen saver, the dashboard screen comes up as the opening display, how can I stop this?

  • Need Help in analytic function (LAG)

    The requirement is like I have a table with belwo colums col1 count flag flag2 abc 1 Y Y xyz 1 Y Y xyz 1 Y NULL xyz *2* N N xyz 2 Y NULL def 1 Y Y def 1 N NULL To get the flag2 columns 1.Assign falg2 as flag for rownum=1 2. We have to check the colm1

  • AddChild function in another Class. plz help!

    Hi, I am trying to pull a funtion that adds a child to a container. This function gets pulled in another class. All the traces do work by the child doesn't show. pulling the function from StickerBook_Class public static var stickBook_Class:StickerBoo