Setting up a password for Airport access

I am trying to set up a WEP password for the computer that our kids use to limit their internet access. What I want Airport to do is to require a password EVERY time the computer wakes up or is turned on. I can set up the password, but once its entered one time, it is remembered by the kid's computer and there is no need to re-enter it again. How can I require a password each time Airport is accessed?

This is not possible without changing the password every time.
The easiest solution is to unplug the internet connection from the Airport base station and plug it in as and when they need internet access.
You may want to consider getting the new Airport Extreme.
http://www.apple.com/airportextreme/security.html
A useful new access control feature lets you decide not only who accesses your network but also when they can access it. If you’ve got kids with their own computers, for example, you can control the times they’re allowed to access the network. They can have accounts that are available only at certain hours of the day — for example, when you can be home to keep an eye on them.

Similar Messages

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it?

    I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
    Thanks.

    Hey Lori,
    You can set or change the password for an Apple ID by following the steps in this article -
    Apple ID: Changing your password - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • MDT 2013: bootstrap.ini not applying username and password for share access

    I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access.  The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
    at all.  
    bootstrap.ini: 
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\mydeploymentserver\DeploymentShare$
    UserID=myuserid
    UserDomain=mydomain.com
    UserPassword=mypassword
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>2</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username>myusername</Username>
    <Domain>mydomain.com</Domain>
    <Password>mypassword</Password>
    </Credentials>
    <JoinDomain>mydomain.com</JoinDomain>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName>eos-vm-02</ComputerName>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>http://www.eosmith.org</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>
    ... and the bdd.log file appeared not to read the username and password at all:
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>

    Basics - Server 2008 R2 - SP1, WDS,  MDT 2013
    Well all, I've done this at least 20 times today and the deployment share info is still wrong...
    Someone else built and messed with this thing so i'm trying to fix it.  We have 2 MDT servers and 1 WDS that is on the Production MDT.  I've turned the test MDT off.
    It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
    Very Simple bootstrap.ini
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\MMPDEPLOY02\DeploymentShare$
    UserID=xxx
    UserDomain=xxx
    UserPassword=xxx
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    It continues to show up on the client as ||mdt901w8|deploymentshare$  (test server) (pipes for \ since it makes it a link and i'm new)
    I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
    I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
    Any ideas..

  • Long story short i need to set up a password for my links...

    long story short i need to set up a password for my linksys wireless router... i tried go to linksys' website link  i went ahead and set up a password using instructions from the link above...went to http://192.168.1.1/...clicked on admin tab and set up password... to test out my password i turned on/off my wireless connection on my macbook. when i turned it back on and selected the linksys wireless connection from the dropdown menu on my macbook it did NOT prompt me for a password? what am i doing wrong? why isnt it asking me for a password?
    Message Edited by OnnagokorO on 11-27-2007 11:53 PM

    The password you have changed is the password which protects the access to the web interface of the router. In other words, you must know this password to make changes to the configuration of the router. It is not the encryption key for wireless security. Wireless security is configured on the Wireless Security tab.
    For some more background see here.

  • Setting Up A Password for Mac Mini

    Hello
    Due to Lion causing an issue with my wifi I had to downgrade to Snow Leopard which meant all my settings  etc were changed.  How do I set up a password for changing things on my computer and locking up  after changes
    Thank you
    rachealfromva

    Try powering it down, & if they/you didn't setup Firmware Protection Password, or FileVault, then try this...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • Setting up a password for my wireless internet

    We have a linksys wireless router I believe, (and macbooks) and our wireless internet that both my roommate and I use is not secured...ie: anyone can connect to it. To prevent my neighbors in the apartments and buildings around us I would like to set up a password for my roommate and I for our wireless. I have no idea how to do this. Can someone tell me the steps or whatever I need to do?
    Thanks!

    You do this in the router's configuration. Most LinkSys routers can be accessed through your browser by entering the router's access address into your browser's address bar. For example, http://192.168.0.xxx, where xxx is the last node of the router's IP address. You will find this in the router's user manual in a section on configuring from a browser.
    Once into the configuration pages look for a section on security. Choose WPA2 security (do not use WEP) and set your password. For additional protection you can also set up a "private" network in which you enter the MAC addresses of only the computers you will allow access. Even if someone hacks your password they will not be able to access your network unless you list their MAC address in the router's private network configuration.

  • How do you set a security password to control access to an external hard drive?

    how do you set a security password to control access to an external hard drive?

    The only way to reliably protect data, especially on an external hard drive, is to encrypt it.  Permissions don't have to be respected.  One way to encrypt data is to create an encrypted sparse bundle disk image with Disk Utility.  See:
    http://support.apple.com/kb/HT1578
    (Be sure to use the 256-bit encryption.)
    Alternately, you could use some whole-disk encryption, though I have no experience with any of the software for doing that.  You could try the following:
    http://www.truecrypt.org/
    I don't know that I would recommend the product being advertised inappropriately by keynesis.

  • My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it. I have changed my password through Security and my Accounts numerous times to no avail.  Is there anythin

    My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
    I have changed my password through Security and my Accounts numerous times to no avail.
    Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.

    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select
              Change Settings for Keychain "login"
    In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ First Aid
    There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.
    If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

  • Any way to save password for wiki access?

    Is there any way to save the password for wiki access?
    I don't want to require my users to put in a password for the wiki when they've already put one in for their user account.

    Safari and Firefox refuse to store the password in the keychain because we never actually submit the form. This is because we use JavaScript to digest the password before sending it up. That allows you to have a non-SSL site (and, correspondingly, not have to deal with certificates) but also not send passwords in clear-text and provide a Logout button (which standard HTTP and Kerberos authentication methods don't allow). In order for us to support storing passwords in the system keychain, we would have to either send passwords in the clear, remove the logout button, or require everyone to acquire and set up certificates for all of their sites.
    Given these constraints, the best solution is a "remember me" checkbox which saves your session and keeps you logged in, and we're currently working on that.

  • My laptop (HP Pavilion) will not allow me to upgrade or download Firefox without logging in as Administrator, and I don't recall ever setting up a password for Administrator...I'm the only user of the laptop. How can I get around this?

    I was trying to upgrade to the newest version of Firefox, and when I downloaded it, and clicked on run, it took me to a login box, where I had to choose whether to continue as current user or login as Administrator. When I clicked on continue as current user, nothing happened. When I tried logging on as Administrator, I used all the passwords I could think of that I use and nothing was accepted. Id on't recall ever setting up a password for Adminstrator on this computer, so I don't know what to do. I even deleted the older version of Firefox thinking that might help, but it didn't work either, and now I don't even have that! Help!

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • Help!!!!!! OS X wants to use the "local items" keychain. Please enter password. I have tried every password that I know of. Nothing works! I haven't even set up a password for this

    Help!!!!!! OS X wants to use the "local items" keychain. Please enter password. I have tried every password that I know of. Nothing works! I haven't even set up a password for this

  • HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    capriz wrote:
    i have just updated my old 3GS ...
    To what... iOS 7 is Not supported on the 3 GS

  • How set  UserName and Password for HTTP Basic Authentication for a servlet

    Hi..
    How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
    Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
    But i dont know how do it in JBOSS..
    I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
    Thank u

    Hi Raj,
    You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
    Store the user information in a database table and check the username and password when the user enters it.
    You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
      CASE sy-ucomm.
        WHEN 'BACK'.
          LEAVE PROGRAM.
        WHEN <fcode for submit>.
          SELECT SINGLE uname pwd
           FROM <DB table>
           INTO (user, pass)
           WHERE username = user AND
                   password = passwd.
          IF sy-subrc = 0.
    <Go to next screen for further processing>
          ELSE.
    <Display Error message and exit>
          ENDIF.
      ENDCASE.
    Regards,
    Amit
    Message was edited by:
            Amit Kumar

  • Username and password for Sun Access Manager 7.1

    Hi
    Thank you for reading my post
    I ge the new Java Application Platform SDK Update 2 which has access manager and portlet management inside it.
    Can you tell me what is username and password for Sun access Manager 7.1 administration cosole?
    thanks

    with me it was amadmin : admin123
    in the readme file in the addons directory:
    Done! Access the AM server URL and see if the Access Manager is working or not -
    <amserver_protocol>://<amserver_host>:<amserver_port>/amserver
    user : 'amadmin', password : <admin password>
    in a config file i found the password was admin123

Maybe you are looking for