Setting up a Quality/Production System-- Pl suggest

Dera All,
We are on SRM 7.0 and ERP-EHP4. We have a development Server and have configured the SRM and ECC for the Extended Classic. What is the best approach to create a Quality/Production System?. I Have gone through the document System Transport and Copy too and have a couple of questions.
1. Do We need to perform a client copy with SAP_Cust from Development to Quality and Quality to Production? and then do the necessary settings for Product Categories/Products/Business Partners and Org Model Transport etc...?
2. Is System copy a good option?. ( The document suggests not to go for System Copy for setting up Quality/Production Systems from Development Server)
Pl suggest.
Thanks and Regards
velu

Dear All,
Any suggestions. Can you pl share how this is being handled in your current projects?.
Thanks in advance
regds
velu

Similar Messages

Solman CHARM: adding multiple clients for quality/Production systems in Solar_project_admin

Dear Colleagues
We are using Solution manager 7.3. When we setup system landscape under a solution manager implementation project, we can only select one development and one quality/testing system.
Our scenario is that,
Development System:
D40 - 010 : (both workbench and customizing changes being done in same client)
Quality System:
Q40 - 010 : for customizing changes
Q40 - 000 : for work bench imports
So the querry is that, how we can add these two separate rows in Solar_project_admin and under tab systems:
ie D40-010 --> Q40-010 and D40-010 --> Q40-000.
Regards
Renjith

Hi Renjith
Please check below
Change Request Management scenario: Usual questions and known errors
Question no. 2 is more relevant for you
hope this answer ur query
Regards
Prakhar

Data Uploading in Production system

In Production system
In OX09, for a Plant/Sloc combination, In the Addresses of storage locations ,we need to update some text(For example- test) in the SORT1 field (Search Term 1/2 Field) ,
This we need to update for about 50-60 Sloc's in Production system,Kindly suggest what is the best way to achieve this without affecting other customization settings
The SORT1 Field is in ADRC Table, We need to link this by passing the Plant in TWLAD table,get the Sloc and Address number field and Pass the address number field in ADRC Table and check the SORT1 field.
Regards
Amuthan M
Edited by: Amuthan M on Nov 18, 2008 10:45 AM

Since its a customization data updation , normally for transactional data or any material master extension we use LSMW, in this case is LSMW is the best way to do that through Flat file
Any more inputs Please,We need to finalise the approach ASAP
Regards
Amuthan M

Setting client role in non-production systems

In our QA test systems of R/3 and BW, the client role in SCC4 was set to 'Production'. The reason I was given is that by setting the client role to 'Production', will enable some settings in FI such as period closing,and customizing settings remain open without transportable requests. I totally disagree with this. I worked on numerous projects, but this is first time I am hearing this. I always set client role to Test in non-production systems, without any problems. Do any one have any idea about this?
Thanks
Santosh

SAP have a concept of "current settings". These include things like exchange rates and other items which really appear to be configuration settings. In a non-modifiable system these cannot be changed because the transport management system tries to get involved. If the client is set to productive, this restriction is overridden.
I would always suggest that the QA system should be set to productive and non-modifiable to ensure that the behaviour of the transactions affecting such objects can be tested in a production-like environment. If you need to have your QA system open for any sort of changes you are exposed to having changes introduced in QA to leading to the impression that new/modified functionality or config works but when the transport takes the unmodified version to production you'll be in trouble.

Process chain (RSPC) modifcation in Quality and production system

Hi,
In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system.
As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa? in RSA1 -> Transport connection we made RSPC ( Process Chain) , RSPT (process chain starter) and RSPV (process variants) are changeable.
With this setting we are able to create/ edit new process chain in Quality and Production system. But we canu2019t edit the transported Process chain. i.e. process chain transported from Dev to Quality system.
We donu2019t want to open Business Information Warehouse: Customer Namespace (/BIC/ ) in Quality and production system (Se06). Please let me know is there any other settings needs to be.
We are on BI 7.0
Regards
Preethish

Hi ,
In RSA1 -> Transport Connection --> Object Changeability
Object has 3 state
Not Changable
Changable Original
Every thing changable
What is the difference b/w Changable Original and Every thing changable
Thanks..
Preethish

Program to Auto Import transports to quality and production systems

Hi Experts
Do anyone have a program that imports transport requests automatically into quality and production systems from development? I know there is a procedure to import all into QA that can be set in TMS.
But I am looking for a program instead that could auto import into quality and subsequently to production.
Thanks,
Ravali

You need to set the autoimport job in Q whichh will bring all the transport from Dev when they are released. For autoimport go to STMS --> import queue of your Q system -->Start import with the small truck sign and it will ask you to select the time (run it every 15 mins or so) --> start the job
Production you never setup an autoimport, there might be some transports which you may not want to send to prod, only the approved transport will go to prod. Hope this helps

Transformation pointing to Quality Client in Production System Repeatedly

Hi,
I need to understand one issue which is explained in detail below step by step.
1. I created one Customized Data Source(Full Load) and replicated in BW.
2. Also created Info Objects, DSO, Info Package, Transformation, DTP.
3. While transporting this modelling to Production(first time), i unknowingly/mistakenly missed capturing the datasource in Transport Request.Sequence of transport was -
Data Source
Info Area
Info Object Catalogue
Info Object
DSO
Cube & MP
Data Source
Transformation
Info Package & DTP
Now, the moment TR for transformation was transported it threw an error - "Data Source does not exist in Quality client". Then I transported the Data Source TR and after that re-transported the transformation TR production and this error was removed.
But, there were 2 transformations in production - 1) Pointing to Production, 2) Pointing to quality.
4. I request the basis team to delete the second transformation(pointing to quality) from BW production system.
5. After that we captured Data Source and transformation in same TR and transport was successful.
6. Now, after few days we transported a change to production for same object and the system again threw the same error mentioned in point no.3 above and created two transformations again.
How to resolve this issue permanently and I also want to know the reason of this type of system behavior.

Mohammed,
I did that also - please read my step no.4.
We are able to delete the transformation which was referring to quality client and then captured D.S & transformation in a single TR and transport as successful.
Now, after few days I did one change in the same transformation and transported to production.
System Behavior:
Error - " No source exist (i.e.,system referred to quality in production)".
Also again transformation was visible in production which was referring to quality client(which we already deleted with the help of BASIS).
Now since again the transformation needs to be deleted from production, our basis team is telling us to they cannot delete objects every time in production.Thus,
1. Is there any option to solve this issue permanently?
2. Also is it necessary to transport data source along with the transformation which is directly linked to data source?
Please Note: We have Dev+Quality as one client and Production.

Need suggestion on importing BC SET : UKM_DCD_CUST in SAP ERP system

Dear Gurus,
Client wants me to import BC SET : UKM_DCD_CUST into SAP ERP system. I have found BC SET : UKM_DCD_CUST in T code SCPR20.
I have read most of the SCN discussion and got two way to import BC SET into ERP system as given below. But I need the appropriate way to do this. Can any one help me in this?
1. SCPR20 -> Activate BC set -> create customizing request to import into another system as per link :Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
2. Create TR in SE01 in 000 and import into required client as per below proc:
Usual procedure
1) BC SETS will be attached to SAP note usually. Download it and unzip it , you will get a *.bcs file
2) Call transaction SCPR20  BC set --> Upload In the dialog box that then appears, specify the files that you unpacked
Import the set BC into a package that you have defined. activate it with the "Expert mode"
3) You will also get a *.txt file with prog id , obj etc entries , then you have to go to SE09 and create a transport request in the source client of your Solution Manager system (client 000). Open the *.txt and copy the entries it contains into the transport request. Use transaction SCC1 to import the data in your Solution Manager client(s)
Thanks,
Anand Aseri

2). Client copies bring the Customization data but not WorkBench . So you might have to do transport of copies from Old Dev to >New Dev.
So you are saying that the system copy from Production will not bring Workbench data and I need to bring Workbench data by transports?
*system copy from Production will bring Workbench data also, but when you do client copy from development system again on top of client which already has production customization, data and workbench requests, Production customization and data will be overwritten from development customization and data (it depends on the profile you choose for the client copy) *
However Development Workbench requests are more and also has ongoing development work which might not be available in production client and those (Ongoing development workbench requests) you need to import in new system as transport of copies after the client copy
3). If you do system copy from Production and do client copy from dev...obviously Prod customization will be overwritten with Dev rite ?
That's what I expect to happen,
Ok, however, You might need to get Development Work too from the old dev system and don't forget about setting up of partner profiles in WE20.
It's just a thought , Do you have testing client in Dev, if not,You can leave the production client in development system and use it as testing client.
Create new client which is client copy of Old Dev and import WorkBench requests *
Thanks,
Arjun

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks?

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks to leaving the Configure IPv6 setting to Off?

Nope. You can always reverse that if you choose.

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

Functionality to copy SO working in quality but not in Production system -

HI Friends
I have created a ztcode which uses bapi BAPI_SALESORDER_CREATEFROMDAT2 to create copies of a manually created sales order
this function was working perfectly fine as till now we only had one line item per sales order
last week we added a material which has 2 BOM items (both non stock)
We passed only the parent item into the bapi so the orders created thru the bapi had only the parent item and the child items exploded on to the order because of the BOM config already in place.
This works perfectly fine in Quality systems but failed in production
Both the systems are identical in nature in all respects visa vis transports config and system patch as well.
The BOM is maintained in CS01
both the child items are marked as Relevant for sales and BOM usage is marked as 5
I am failing to understand why it doesnt work in production
And as we have used std bapi my tech consultant has been debugging without any sucess as well
Would appreciate any thoughts on how to find a lead in solving this mystery.
Regards
Supreet Upadhyay

HI Shiva
Thanks for the answer ,we have reimported all the relevant transports thrice but in vain
Also the config is in place,I forgot to mention earlier that the manual order that we create which is used as a reference to create copy orders explodes the child items
So config doesnt seem to be an issue here.
The code should also be ok coz it works in quality
so we think somehow it has to do with the production system
we are clueless in what direction should we investigate
Supreet

My Pro Tools program was damaged by the Creative Cloud system. I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappoin

My Pro Tools program was damaged by the Creative Cloud system.
I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappointed and would like you to advise me how to restore my program to its working state. I am in a traumatic state since I have Artistes life work being processed in the Pro Tools 9 Program. Help! Help! Please.Ps. I tried reinstalling the software from the Disc....Still NOT working.

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Use 'se38' to set variants with long time no-response in production system?

hi,Guys, When I use 'se38' to set variants with long time no-response in production system?
I think it's none of business with program performance. Maybe system response delay, But no other program like the same response happened?
best regards

Hi,
what's your problem? Didn't get the point.
You have a report, where the maintenance of the selection variant has a long runtime (in production?)
Maybe AT SELECTION screen some checks / helps are executed, which are quite fast in DEV, but access much bigger tables in PROD and need to much time. Such checks should be improved / moved after START-OF-SELECTION.
Regards,
Christian

Issue whilel transporting from production system to quality system

Hi All,
    I am facing issue in process chain when I transport it from production system to quality system. Process chain is related to deleting PSA logs. When transported to quality system object_type and object_name fields in display variant becomes blank. In production system it is showing 8ZXXX_CA, it should become 8ZXXX_HA in quality system.
   Thanks for your help.
Regards,
Shankar

Hi,
    sorry it was frm dev system to quality system, not prod to quality.
Regards,
Shankar

Difference in the performance of Quality and Production system

Hi All,
We have a scenario wherein we refreshed the production system data into quality system 1 month ago.
Few days back we noticed that when we are trying to fetch data from COMM_PRODUCT database table (in CRM Production system) based on the product description.....it was taking 2-3 mins.
However, when we try the same in quality system, it takes only 10 secs. Any idea as to how there is such a difference when both the production and quality contain nearly same data (was refreshed only one month ago).
Any thoughts on this?

You should really search the forum before asking. Exactly the same question was asked and answered here two weeks ago: Performance of the program is very good in Quality but Very poor in Prod.
Rob

Setting up a Quality/Production System-- Pl suggest

Similar Messages

Maybe you are looking for