Setting up A Record

I am a newbie to all this server stuff so please excuse my ignorance and please treat me kindly in words of one syllable. Our secretary creates pdfs of the school newsletters which she uses Microsoft Office Sharepoint to send to our school website. Since putting in a new Leopard server, she can no longer access the sharepoint. Apparently I need to add an A record to resolve DNS issues to the website sharepoint. I presume I go to Server Admin, Click on Zones, use the Add Record drop down to Add Machine and give it the IP address of the server. Am I on the right track? What else do I need to do? Thanks for any help anyone can offer a newbie!
Cheers

Hi,
If your DNS is already setup and working then your steps are on track. Before you leave the DNS setup verify your reverse DNS pointer for your zone remains correct. It has a habit of changing at times with new entries in the zone and will cause problems without you knowing it happened.
Microsoft Office Sharepoint is not in my realm of experience so I can't say if this is the only remedy to your problem.
HTH,
Harry

Similar Messages

New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime. I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
Frank

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

SB Audigy 2ZS Plarinum Pro: setting source for recording

Hello!
I am having problems setting the source for recording. I want to set the recording source from 'Wave' (default) to 'Line-In /Mic'. After doing so with the mixer or the MediaSource Player it resets to 'Wave' after some time. Why? Can I force the software to make 'Line-In /Mic' the default setting? It really dri'ves me nuts to see that the source has changed without me being notified. I want to have the source changed only by myself and not by some cozmic radiation, God's will, voodoo magic and whatnot.
Greetings
ClustalW

<Re: SB Audigy 2ZS Plarinum Pro: setting source for recording? Okay ClustalW, I understand the "Default" problem you are having. So can you go to control panel, and sound and there look at your recording devices and tell me what do you see? If your desired device is there, you can choose it as the default and then throughout the rest of windows, this will be THE global default recording device or the first choice, when you are in other programs to record from. Also, make sure your device is plugged in when making this change. On my system with that board, a few years ago, I could make the choice, but it would always pick something else when the source was unplugged. For example, if I were using the front bay inputs as recording, when I would unplug them and reboot, my system picked the next thing as default.
Next go into to your Creative Control panel and do the same thing there. Theoretically your choices should be linked, but this is not always the result. I can choose mine in Vista and windows 7, but lastly I always go to the Creative mixer applet and do it there and that works best. For me, my default is my front panel Mic or Microphone FP but as soon as I unplug it, it wants to make my back mic jack the default.

HOW DO I SET MY AUDIO RECORDING PROGRAM

I AM USING BEHRINGERS UF0202 TO TRANSFER MY CASSETTES TO ITUNES. IT SAYS TO SET MY AUDIO RECORDING PROGRAM TO RECORD FROM THE USB PORT. HOW DO I DO THIS?

Are you are using an audio interface?
Are you recording external instruments... you will need to explain what kind of audio, virtual instruments, loops, recorded audio through an interface?
If you're recording through an audio interface (or the computer's audio input) Logic's plugins cannot stop peaks as Software is -after- the the hardware input. If you're getting peaks recording through hardware you will need to bring down input levels.

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

How do I set an SPF record?

I'm quite unfamiliar with SPF records, but I'm using FreshBooks to invoice my clients. However, my invoices seem to be going to many people's junk and spam folders. Freshbooks is suggesting to set an SPF record to avoid this. Can this be done with icloud emails, or is this specifically for a privately owned domain email?

If you have set up your Domain A-record on the registra to point web traffic to BC you do not set up another A-record in BC.

Setting up MX Record for External email Access

To All,
I'm having trouble getting mail sent from external users to email accounts setup on my internally hosted server.
I have setup my server in a Standard Configuration using the following format for my FQDN:
server.mydomain.com (not real name)
I have checked both Primary Zone and Reverse Zone and both check fine.
I can send and receive email, while connected within my local domain, between users I have setup on my server using the format:
[email protected]
I can send email from inside the network to an outside email account, but cannot receive email from any users outside.
I have POP, IMAP, and SMTP ports (110, 143, and 25, respectively) all forwarded to my server thru my AEBS.
Consulting the setup guides, I have found these references to editing the MX record to allow for external email access using the [email protected] format:
+"If you don’t want to use your server’s fully qualified DNS name for users’ email addresses, the+
+DNS service must also include an MX record for your server. For example, if your server’s DNS+
+name is myserver.example.com and you want to have email addresses like [email protected],+
+the DNS service needs an MX record for your server."+....from the Installation and Setup Worksheet, page 15.
also
+"If you want users to be able to send and receive mail over the Internet, make sure DNS+
+service is set up with the appropriate MX records for Mail service:+
+A. If you have an ISP that provides DNS service to your network, contact the ISP and+
+have the ISP set up MX records for you. Your ISP needs to know your mail server’s+
+DNS name (such as mail.example.com) and your server’s IP address."+...from the Mail Service Admin page 22.
My question is...how does the MX record need to be set up?
Like this?
10 @ mydomain.com
Thanks for your help,
Steve

Camelot,
Thanks for replying.
1) What format do you want your users' email address in? (e.g. [email protected], >[email protected], [email protected], etc.)
I want my users to have a [email protected] email address.
I set up an A record as you suggested:
mail.mydomain.com A 1.2.3.4
My MX record was setup:
mydomain.com 10 mail.mydomain.com
However, I am still getting returned email from outside users. They are getting the following error:
+This is an automatically generated Delivery Status Notification+
+Delivery to the following recipient failed permanently:+
[email protected]
+Technical details of permanent failure:+
+Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14).+
Checking the Server Logs for IMAP I am getting these errors:
+Jan 21 12:11:34 server imap[44121]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:25:18 server imap[44236]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:31:46 server imap[44473]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:32:49 server imap[44499]: AOD: crypt authentication error: authentication failed for user: username (-14090)+
+Jan 21 12:37:06 server imap[44598]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:49:39 server imap[44520]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:01:51 server imap[45049]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:11:58 server imap[385]: AOD: user opts: get attributes for user: user failed with error: -14479+
When I try and use an online MX Record checker to check the MX record, it says the mail.mydomain.com record is invalid.
It's not until I change my MX record back to:
+@ 10 mydomain.com+
will the MX record show valid.
Network Utility scans show the following with the MX record set to @ 10 mydomain.com:
++; <<>> DiG 9.4.2-P2 <<>> mydomain.com mx +multiline +nocomments +nocmd +noquestion +nostats search+
++;; global options: printcmd++
++wekrugs.com. 3600 IN SOA server.mydomain.com. admin.mydomain.com. (++
++ 2009011900 ; serial++
++ 86400 ; refresh (1 day)++
++ 3600 ; retry (1 hour)++
++ 604800 ; expire (1 week)++
++ 3600 ; minimum (1 hour)++
++ )++
If I have it set up the way you suggested, the Network Utility and MX Checker reports that the NameServers don't respond to the entered MX record name.
Thanks again for your help,
Steve

Data Merge - Sets of Single Records?

I am trying to use data merge to fill in fields, only problem is I need 2 sets of 2 records on one page. I could possibly reformat this to work on one page, but I would still need 2 sets for each record. Also, I know I could probably just change the data to have 2 of each record, but assume the data is unable to be changed. If there is a way to make a text box a slave of another where it could mimic the original record, maybe I could do it that way, I just don't know if that is possible. See image below.
I am using InDesign CS3. Any ideas?

I don't think there's any way to do this directly, but it could be done in two steps using a script to get your two-up layout.
First, set up a page to hold only one record and do the two instances of the names as a single record per page.
Next, go to http://forums.adobe.com/message/1308215 and copy the rotatepage.js script into a plain text editor like notepad, and save withthe .js extension in the Scripts panel subdolder of the scripts folder in your user profile or user library. In Windows XP the path is \Documents and Settings\<user name>\Application Data\Adobe\InDesign\Version 5.0\Scripts\Scripts Panel and it will be similar in other operating systems.
To run the script, double-click it in the scripts panel. I Think it should run as is, but if it fails, make a new subfolder in the scripts panel folder called "Version 3.0 Scripts" (without the quotes) and move it into that, then try again. Waht this script does is make a PDF of the open file, then create a new file with rotated pages and places the PDF rotated into the new file. The primary use was for doing things like calendars, but it will work to give you spreads that you can print (by checking the spreads box in the print dialog) as two-up.

Adobe Acrobat 5.0 Set End of Record or Record Break

I have used a plug in (XMPie) to InDesign to generate a 4 page variable document. This document contains multiple records. I have created a PDF output a file containing 800 pages. The problem is, I need to be able to define where the end of each record is so that I can properly collate and staple each record (4 pages) separately. Is there a way to do this in Acrobat?

Adobe proior to version 9 discouraged multiple Acrobat/Reader product/versions on the same client. Version 9 says it is OK but you still need to set each applications preferences correct to stop the sibling bickering. Too many posts about this.

How do I set a microphone recording device?

I have downloaded Audacity , a freeware audio playback program, for which I have to 'set [ mic] recording device' and can't figure out how to do that. I have plugged a desktop mic into the right panel port and have looked for the right location to activate that mic in
Firefox, and can't find it. Please help.

Sorry, that isn't a Firefox support issue.
There is documentation and tutorials for Audacity here. <br />
http://audacity.sourceforge.net/help/

Setting Color for Records in forms6i

Dear All
How can I set color for particular records on a form. i.e. Set the color of all employees whose salary is greater than 2000 to Red and All the rest to Green
Solomon

Hello,
6i is an old version and I don't remember if there is a Set_Item_Instance_Property() built-in. If yes, you can use it with a Visual Attribute that held the colors.
Francois

How to use Correlation set to persist record in BPEL for multiple request

Hi ,
I need to persist record in BPEL as it a stateful.I am using soa suite 11.1.1.5 v.The purpose is to persist multiple messages from single service/partnerLink(JMSAdapter)and aggregated to form a group message using BPEL correlation set concept
There are 5 message in a JMS queue like 1st message ->one,2nd message->two,3rd message->three,4th message->four,5th message->empty
All are text messages.Last message/string is an empty message.
IS it possible in bpel to fetch all the 5 message(using JMS adapter) under one single instance and append all messsage until empty string is not coming?
My final output would be one single message:*onetwothreefour*

Can you contact me offline @ [email protected] ?

"Could not determine request character set " error while recording

I am using the OATS 9.3 GA version. When I try to record a load testing script using Openscript, I am getting the following error and the recording gets stuck without moving to the next page.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2011-08-11 14:50:26.328
!MESSAGE Could not determine request character set for https://adcgek13.us.oracle.com:10616/sales/BIProxy?cid=BIPresentationServer&RedirectURL=res%2fsk_blafp%2fdvt%2fBIChart.swf, referer=https://adcgek13.us.oracle.com:10616/sales/faces/mooOpportunityHome?_afrLoop=83903503964000&webApp=HomePage&fndHomePageViewId=%2FAtkHomePage
Should I check any of the script or record settings to fix this?

Hello
Where did you get the 9.30 GA version? is not yet available for download.
Regards
Alex

How to set/determine live recorded stream video quality?

Hi,
I was wondering if I were to create a NetStream object and publish it passing in "record" (allowing the end user to record a video via webcam which is then stored on the FMS), how would I specify the bitrate and frame rates etc of the video being recorded? Is this something I need to configure flash media server to do or can I do this through action script?
Thanks

FMS will record video at the bitrate/framerate which is published to the server. You'll set your encoding parameters on the client side from where the video is being published.
In the case of flash/flex, you would set this using the setMode and setQuality methods of the Camera class.

Automatic file length setting for continuous recording?

In iMovie 6 I was able to do long duration ( all night) recordings with automatic file splits at ten minutes. Hence, I would have 6 manageable files per hour.
I can't find a way to set file lengths in iMovie 9.
Is there some place in the preference files where I can set the length?
Thank you in advance.
Thomas

Is there a length/size limit that GB can import?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength
I made an 85-minute mp3 recording (with an Olympus LS-10) that does not successfully import
http://www.bulletsandbones.com/GB/GBFAQ.html#PortableRecorderMp3s

Want to display a result set of 100 records

I have queried from the databse and got a result set of say more than 100 records on a JSP page.Basically as the records are many I want to display 10 records at a time on the JSP page. Please suggest me how I can do it so that i need not query again and again to the database. May be I can have a "Next" button/link which shows the next 10 records on the same JSP page.. or a sequence of numbered links ( say if i have 150 records, 10records at a time I will have 15 numbered links) so that if i click on that number link i will be shown that coressponding records
How can I acheive this. Is there anything possible with Javascript?
PLease do advice me as I am new to HTML/Javascripting and JSP.
Any information will be greatly appreciated.

Take a peek at a tag based solution :
http://www.dotjonline.com/taglib/grid.jsp
Good luck.

Setting up A Record

Similar Messages

Maybe you are looking for