Setting up a Voice call from ONT/OLT to Softswitch via SBC
Hi,
I am setting up a voice call over SBC to softswitch basically SIP over ISUP,now i have a small issue that my SIP user is getting registerd at both SBC and Softswitch and able make OG/IC calls.
Now my question is whether will i be able to ping the client ip from SBC,since i am not able ping the client ip.is there any firewall restriction at OLT/ONT side.
Hi HW,
The PBX is a Panasonic TA308. There is no special interface to the PBX, the line port on the SPA3102 is simply plugged into an extension, like another phone. Anyone calling that extension will have the call routed through the SPA & PAP2 to the remote phone.
The whole setup is totally seamless, & transparent to the user. As we are on a local network there is virtually no latency. There is a slight tendancy to echo, but the echo suppression mostly takes care of that.
THis has been a good exercise, and once I got my head around what I was trying to do, with your help, it was pretty easy. I think the hook flash timing would be the thing which gives most users a problem, as it seems to vary widely around the world. I was surprised at the difference between the US and NZ (.1 & .9 to .07 & .13). There didn't seem to be any other critical differences.
Now I am the local expert on VoIP "In the Kingdom of the blind, the one-eyed man is King."
Similar Messages
-
Why my iphone cant hear voice call from an android phone using viber apps?
Why my iphone4 cannot hear voice calls from an android phone using viber free call apps?
I second the question posed by Rysz....if you have ANYTHING set up at all (a mail account, etc) it will communicate with it's server..whether polling for new mail, syncing notes, etc.
Also, the 4S is designed to be PC Free, so check your General settings tab to make sure it's not checking for Software Updates. Also, are you backing up to iCloud? This will automatically do things in the background. Check the iCloud settings page.
And to ensure no apps are running, double click your home button. When the screen raises up it will show icons of any running apps. Hold your finger on one of them, and they will start to dance with X's on the corners. Tapping the X's closes the app. Close them all, then hold your home button and power button at the same time. Slide to power off, leave it off for a minute, then power back on. This will ensure no apps are running in the background. -
I am trying to find an app that will automatically forward all voice calls at preset times each day
IE - at 083am weekdays
and automatically cancel the call forward at 6pm weekdays
At the moment i am doing it manually with alarms set to remind me
Seems a pretty basic "want" but - i cant find anything
And APPLE - make it easier to find APPS in the APP store - wy not have a search feature that you can type in what you are looking for??
Thanks!!There are no apps to do what you want, that's why you can't find any. No app would have access to the necessary API's to do this, thus only Apple could implement such. You can suggest such to Apple here:
http://www.apple.com/feedback/iphone.html
Another suggestion is to look at Google Voice. I don't know if it offers these specific features or not, but it is highly customizable. -
How to set up free voice calling
This will work for any wifi/data enabled device- regardless of whether it is an android smartphone without current service, or a wifi/3g/4g tablet
I currently enjoy free local/long distance calling on my Xoom, and I use the Motorola H730 bluetooth headset. very nice.
what is needed:
1. download Groove Ip
2. download Google Voice app (for sms texting/voicemail)
3. (recommended) bluetooth headset
then go to Google Voice website, get a free number ( do not port your current Verizon data number!)
then forward Google Voice calls to your tablet's Google Talk via the settings on Google Voice.
log into your Google account via Groove Ip app, punch in your new number.
Configure, and tweak:
Audio/Echo Settings>Basic Echo Canceler
Troubleshooting>Synchronize Voice
Troubleshooting>Mic Source>Android Default
Allow 3g/4g calling
Accept calls on answer
Message was edited by: riveHey there,
First you will need this information to update the registration buy form:
http://kb.worldsecuresystems.com/893/bc_893.html
To show hide things based on the options if the form has not been overly modified BC by default hides the CC fields if thats not selected with its own javascript. If a template etc has made changes to that then you need to add you own javascript in for those behaviors. -
Make and receive voice calls from/to PC with iphone
Dear,
I am looking for a app for following :
I have a PC running Vista or Windows 7
I have a hardwired headset + microphone connected to the PC (is essential because I am running also a voice operated software tool on the pc).
I connect my iphone 4 with the pc by USB cable
I want to make/receive calls by using this PC application.
Can someone help me with this ? Any alternative ideas ?
BR
Danyhttp://support.apple.com/kb/ts2802
Jackson -
Can I stop voice calls from going to multiple devices using the same Apple id?
We just upgraded three iPhones and added two iPads. Now we all ring for calls directed to any device.
Did you try to search for a similar question on the Verizon Wireless Community forum? I know I have seen at least two different discussions on this same situation in the last two days. Check both the Apple space and the iPhone 6 space.
-
i have tried everything and nothing is working I have no idea how to delete it off of itunes manualy and I dont have the manage device option.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
For the future:
What to do before selling or giving away your iPhone, iPad, or iPod touch -
Yahoo Messenger and Skype always crash when I use VOICE CALL.
Whenever I try to use voice call from YM or skype, they start to get stuck and crash immediately. I don't think it's the software problem, because I've uninstall and reinstall again and again the both softwares. There must be something that I need to configure from the connection setting, in which I don't know what. I hope to hear some solutions regarding this problem. Thanks in advance.
Hi, this FF site have a discussion on this and what other users are doing. Skype has been a problem before and now it is about the Toolbar they Install without user knowledge from what I have read. There are posts that show how to Uninstall this Skype Toolbar.
http://blog.mozilla.com/addons/2011/01/20/blocking-the-skype-toolbar-in-firefox/
Hope that helps,
eidnolb -
Do I need an online number to get a call from some...
Hello,
Do I need an online number to get a call from someone in Europe who is calling from their computer?Hey the question is what you want to do Sir.
Skype bare and free provides you means to talk voice and video from the application with all your friends who have Skype too on their side. Though you need to connect with them first. Add them manually or through some importing to your contact. There you have the basic capability.
Then you can add with credit or subscription (I personally think that the subscriptions now with 50% off yearly are absolutely great) a few services.
1. Outgoing voice calls to real numbers. They have plans for landlines and mobile with diff prices for diff countries. Again check the promos now for good deals.
2. Incoming voice calls from real numbers when you buy the online number. Alas its not available for all countries yet.
3. You can set your ID so when you call / outgoing voice, people can recognize you.
4. To go number that can let you call long distance and abroad as local call.
And more I guess.
I find their outgoing call quality as unparalleled to any other provider. Call quality from Canada to Israel is usually on par as land line and superior to Bell. -
How can I block 'no caller id' calls from contacting me?
Over the last couple of days someone has got a hold of my number, and has been calling me with a private number. I want to know if there is a way I can block all calls on my phone that come from a private 'no caller ID' number, and only allow ones that have a caller ID through. I have tried contacting my service provider Telstra which they said the most they can do is put me on the do not call register (which doesn't help my situation at all, as the person isn't a telemarketer). Does anyone have any ideas about how to fix my problem?
Thanks.
(I have an iPhone 5 iOS 7.1.1 and my service provider is Telstra Australia)There is no Third Party App you can load onto an iPhone that will be allowed to take over your iPhone's Phone without jailbreaking your device (which cannot be discussed here nor would I ever recommend doing it).
One feature you can use is the Do Not Disturb feature. You can set it to allow calls from your Favorites then add all of your people to your favorites, but that is not quite what you are asking for. -
How to initiate call from PC through my mobile
Hi
How can I initiate a call programatically from the pc through a mobile. Following are my setup.
I have my mobile phone connected to my PC with the data cable. I want to write and application in my PC whcih can initiate a call and play a .wav file and also need to record the responce from the user.
From the java form i came to know that with MIDP2 its possible to initate a call programatically . But i need this to be initiated from my PC . Could some one help me in this.
Any hints or views or alternate ideas are welcome
Thanks in advance
TijoTo my mind you CAN NOT initiate any voice call from a J2ME application using a classic CLDC/MIDP stack but you can you can send mails/SMS/MMS with sounds ....
Regards. -
Skype to Lync voice call fails
Hello
I have configured the Lync federation with Skype. I have IM and Presence interoperability working both ways. Voice is working from Lync to Skype.
My problem is just voice calls from skype to lync. The calls fails and I get a no answer in the skype client. Looking to the Edge logs I can see a "SIP/2.0 480 Temporarily Unavailable" received from the front end that is forwarded
to the skype.
Any idea is welcome
JJhave you opened the required ports for federation?. have a look at the port requirement and see if you missed any or the direction that you opened.
Role/Protocol/TCP or UDP/Port
Source IP address
Destination IP address
Notes
Access/SIP(MTLS)/TCP/5061
Public IM connectivity partners
Edge Server Access interface
For federated and public IM connectivity that use SIP.
Access/SIP(MTLS)/TCP/5061
Edge Server Access interface
Public IM connectivity partners
For federated and public IM connectivity that use SIP.
Access/SIP(TLS)/TCP/443
Clients
Edge Server Access interface
Client-to-server SIP traffic for external user access.
A/V/RTP/TCP/50,000-59,999
Edge Server Access interface
Live Messenger clients
Used for A/V sessions with Windows Live Messenger if public IM connectivity is configured.
A/V/STUN,MSTURN/UDP/3478
Edge Server Access interface
Live Messenger clients
Required for public IM connectivity with Windows Live Messenger.
A/V/STUN,MSTURN/UDP/3478
Live Messenger clients
Edge Server Access interface
Required for public IM connectivity with Windows Live Messenger.
http://thamaraw.com -
I am getting a voice call from PROTECTION ALERT ® but have declined. I can find no information about this caller and I am guessing that it is bogus.
If I am correct then I will block the caller. Please let me know if this caller is real (From SKYPE) or bad and should be blocked.
Thanks,
TriviaWolfcorrect, it's a scam.
please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com | -
Hi, can anyone tell me if the DROID X will be able to make a call FROM Europe TO the USA via a WiFi connection .... for FREE? Conceptually, I would think it would work.... but, I'm no "techie"......
jaylan222 wrote:
Hi, can anyone tell me if the DROID X will be able to make a call FROM Europe TO the USA via a WiFi connection .... for FREE? Conceptually, I would think it would work.... but, I'm no "techie"......
Hi. I will be happy to answer your question regarding making a call using a Wifi connection. There is no application that comes with the phone that will allow you to do so. All calls can only be made through our 3G network. You can also check the application market on your phone to see if you see an application that fits your needs.
Please let me know if you have any other questions.
Thanks! -
I have the $2.99 plan for unlimited calls to USA and Canada. If I'm in Cameroon Africa can I still call the USA on this plan or will I need to change plans
jaylan222 wrote:
Hi, can anyone tell me if the DROID X will be able to make a call FROM Europe TO the USA via a WiFi connection .... for FREE? Conceptually, I would think it would work.... but, I'm no "techie"......
Hi. I will be happy to answer your question regarding making a call using a Wifi connection. There is no application that comes with the phone that will allow you to do so. All calls can only be made through our 3G network. You can also check the application market on your phone to see if you see an application that fits your needs.
Please let me know if you have any other questions.
Thanks!
Maybe you are looking for
-
How to setup multiple daq lists on a ecu with ecu mc toolkit?
Has anyone had the pleasure of setting up multiple DAQ lists on a ECU? I am using ECU MC Addon for Labview 2011. I can successfully setup a single DAQ list and read the data correctly. This method uses DAQ list mode to initilize instead of polling,
-
How to pass a presentation variable to a stored procedure?
Hi All, We have a complex security model to emulate. In order to achieve that, we need to find a way for OBI to run and pass parameter to a stored procedure (SP). "APlus_BI_EmplName2" is the name of the stored procedure. This SP requires a param and
-
What do I do about this situation?
-
Forgive me if this has been answered before, but I've been searching the forums and can't find an answer to my problem. I accidentally deleted files from my main Library > Quicktime folder. I thought I was trashing components installed by a third par
-
QuickInfo shows a single letter instead of full variable name
Hi, I have an isolated shell application based on VS2010 shell. The mouse over on a variable in debug mode gives the name of the variable and the value. Now, I have ported the application to isolated shell VS2013, now the mouse over on a variable is