Setting up a wireless printer for iPad

I am trying to purchase a printer to print documents/email/ect. from my ipad using an app. I DO NOT own a computer at home, so I would need to set up the wireless printer on my network without needing a computer to do so. Is anyone aware of any printers that will allow this?
If not, are there any other ways to allow for printing form the iPad without using a computer as well (for example, a adapter or special cord)?
Any info will be appreciated!

You can simply print from your ipad wirelessly without any kind of cables or Internet connections.
All you need is a simple router like “Tenda W150M Portable Wireless AP/Router (Microcenter: $34.99)” is a small device that can be powered right off of most printers USB ports. Then obviously connect any Wi-Fi ready printer and IPad to this “Tenda” router. No Internet service needed, you are using this for network connectivity purposes only. You now can be anywhere for ex: like in a car and be able to print from your IPad or iphone wirelessly, without any other needed connections.
Chris

Similar Messages

  • How do I setup my hp wireless printer for iPad mini

    I need instructions to setup my wireless hp printer to my iPad mini

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
    Print from iOS device to virtually any printer
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html

  • Setting up a hp 6600 wireless printer for the ipad

    How do you set up a wireless printer on an iPad?

    If your printer is AirPrint compatible, then it should pretty much work out of the box after you install the software on your computer and set up the wireless settings for the printer. Sometimes you need to upgrade the firmware on the printer before it will work.
    If your printer is not an AirPrint compatible printer, you need a third party printing app or you need to install an app on your computer that will let you use the computer as your print server.
    AirPrint Basics
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    PrintCentral for iPad on the iTunes App Store
    Collobos - Presto

  • I have an IPad 2 and have been printing to my wireless printer for almost a year , all of sudden it states it's going to print and says its sending to that printer and nothing prints. I ran the reports on the printer and it's fine, please help!

    I have been printing from my IPad 2 to my HP wireless printer for a year, all of a sudden it's states it's printing but nothing will print, wirless printer ran all programs, everything is fine. Does anyone know what s happening?

    Double-click on your home key, find the Printer Control app, hold your finger down on it until the red circle with a white dash appears. Press on the dash, press on the home key and try again.

  • Help.  I have been printing from my iPad to my home wireless printer for months.  All of the sudden it says. No printer found.  Shut off the printer and restarted. Still no luck.

    I have been printing from my ipadto my wireless printer for months. All of the sudden says no printer found.  Restart eyed printer still no luck.  Help

    Have you tried to reboot your iPad? Hold down the sleep and home keys until you see the silver apple. Let it reboot and try agian.
    Also, try power cycling your router. Meaning, unplug it, count to 10, then plug it back in. Let it reboot and see if that helps.

  • Setting up a wireless print function for a Samsung S5

    Can someone please walk me through setting up the wireless print on the Samsung S5? I have already set up my wifi to find the HP printer however, I can not seem to get anything to print whatsoever. Ready to throw this printer out the window.,

    Hi @
    Thedeb1
    Welcome to the HP Support Forums. I see that you would like to learn how to print from your Samsung S5 to your HP printer.
    To better assist you, would you please supply some additional information:
    What model and product number of HP printer do you have? How Do I Find My Model Number or Product Number?
    How is the printer connected (USB cable, ethernet, or wireless)? I’m just looking for confirmation that the printer is connected to your home wireless network still.
    Was the phone connected to the same wireless network that the printer is connected to?
    What version of operating system are you using on your phone? If you are unsure how to find this information, please follow the steps in wikiHow’s How to Figure out Your Mobile Operating System
    Are you getting any error messages? If yes, what do they say?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • What is the best wireless label printer for iPad?

    What is the best wireless label printer for iPad?

    The Epson Mobilelink P60 series and the Star Micronics T300 will work over wi-fi, but not being AirPrinter printers you'll have to find a third-party printing app that will work with them. The Epson P60 now also supports printing via Bluetooth, according to Epson:
    https://pos.epson.com/products/MobilinkP60withBluetooth?ProductPK=679
    Perhaps one of those would work for you.
    Regards.

  • Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Mac OS X 10.6 Help: Sharing your Internet connection

  • How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

    How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC  using windows 8?

    Thanks for your reply.  
    Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
    http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
    Drive productivity and save paper, using automatic two-sided printing

  • Does anyone knows a cheap portable printer for iPad?

    Hi,
    I need a portable printer for my iPad. There is no much choice and all of them are expensive (>600$).
    Does anyone know a good portable printer for iPad?
    I don't need to print photos but documents (A4)

    Some suggestions here:
    https://discussions.apple.com/message/23649242#23649242
    Battery-powered printers are rather few and far between and of those that exist not all will work with an iPad. Using a standard AC WiFi printer with an inverter will give you more options.
    Regards.

  • What is the best and least expensive wireless printer for ipad2?

    What is the best and least expensive wireless printer for ipad2?

    Do you mean a external cd/dvd drive that connects by usb port? If you do then any brand will work. It does not have to be a apple brand for it to work on your mac. Most go for around $30 in the usa.
    I use a asus brand that cost me just under $30. Works on any computer it is connect to.

  • Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

    Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Wireless printer for mac OSX 10.7.4 any recommendations

    what is a good wireless printer for mac POC 10.7.4,having problems with hp 3050A

    Hello Flajack,
    Thanks for the post.  I did some checking here and the HP 3050a is compatible with MAC OS 10.7 in a wireless environment.  What kind of issues are you having?  Installation? Connectivity?  Maintaining a wireless connection?  I've included a couple of my favorite links below to assist in getting this resolved.  Check the information in these links and let me know how it goes from there.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoC ategory&cc=us&dlc=en&lang=en&lc=en&product=5061082#N315
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en &product=5061082&tmp_track_link=ot_search#N4595
    I work for HP but my posts and replies are my own....Thank you!

  • What is the best wireless printer for the MacBook Pro?

    what is the best wireless printer for a macbook pro?

    I use an Epson NX430 (inkjet) which uses a wireless card: no issues. Also a Brother HL-3040 (laser) connected to modem by Ethernet cable: no issues. Depends on your printing needs and amount of work space available.

  • How do i set up my wireless printer to work with my ipad 2

    My ipad will not reconize my lexmark wireless printer what can I do

    In UK BT generally use PPPoA authentication only so you will have to keep using the home hub as the main router. Put the Time Capsule.. TC.. in bridge mode. To do this go to the airport utility, on menu selection go to internet, and make sure it is set to ethernet for method of connection, and in connection sharing, select bridge. Then select update.. it will probably list some issues like password needing changing and access via wan etc .. almost all of which you can simply ignore.. as you are not using it in router mode.
    The TC will save the setting and restart.. it will now exist as a wireless access point and switch on the network. The WAN is swapped to LAN, so there is no WAN port as such but it is still convenient to use WAN port marked <...> ethernet between home hub and the TC. Then setup wireless as you like. You can turn off the wireless in home hub, and just use the TC.. or use both, on different channels. That is no big problem. Set the security for the wireless is important and I would also manually set wireless channels and use different name for the 2.4ghz and 5ghz wireless. But just start and learn what you need to as you go along. Getting the basics working should be fairly easy. Some of the more complex stuff you just need to read carefully the instructions..
    And read this site.
    Carefully and until your eyes bleed. Almost everything you want to know is there already.
    http://web.me.com/pondini/Time_Machine/FAQ.html
    There are many areas he covers.
    http://web.me.com/pondini/Time_Machine/Home.html

Maybe you are looking for

  • Error while copying an infotype

    hi, i m copying a infotype and create a new infotype, in this all structures are copied in my program but only one structure q0002 is not copied as q9002 . tell me how to do this

  • Specific scenario in AP

    Can someone tell me his/her experience about a specific scenario in AP where he/she faced a problem and did something special in configuration/development in order to move from legacy to SAP system. I would appreciate the help and award suitable poin

  • FRA´s datafile directory and tape backups

    Hi again, I have tried to find relevant information for my question, but instead of finding answers (again) which may or may not be helpful I hope someone can explain me. We are running 10Gr2 databases with FRA´s enabled, currently backupping all usi

  • Project Server 2013 Currency

    Hi All, We are using project server 2013. We set SAR as symbol but its appear in Arabic (ر.س) in all cost fields. I heared there is some script to update the currency symbol as SAR instead in arabic. Could you please help me to update this. Thanks in

  • 64-bit Windows 7 vs. Windows 7 Premium features

    What features does the 64-bit version of Windows 7 not have in comparison to the Windows 7 home Premium?