Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

Similar Messages

  • Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

    I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

    ... Which is the best way to configure this?
    The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
    If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
    As you can see it's quite versatile.

  • Connecting AirPort Express to AirPort Extreme 802.11n

    The following steps helped me set up an AirPort Express base station connected to a set of wireless speakers with my new AirPort Extreme 802.11n base station. I’m posting this because the process was not entirely intuitive, at least not to me.
    I’ll assume you have set up the AP Extreme base station to connect to the internet and run your home network and that you are connected to your wireless network.
    Make sure you set-up the AP Extreme base station to broadcast in 802.11n + 802.11b/g modes, i.e. both at once. You will also have to check he setting that allows the newtork to be extended.
    Reset the AP Express base station so that in runs on the factory defaults by pressing the reset button with a paper clip. Wait for it to completely restart.
    Launch the AirPort Utility. You should see both your AP Extreme and AP Express base stations in the left hand column. Click on the AP Express base station you just reset. When it asks to switch wireless networks do so. Then hit continue.
    On the next screen select “Connect to my current wireless network” option and hit continue.
    On the following screen select the “Extend the range of my AirPort Extreme or AirPort Express network” and hit continue. Do NOT select the “Join my wireless network” option even though it says this is how you connect to wireless speakers. This is the part that was not obvious to me. When I tried this the AirPort Express base station flashed orange and wouldn’t connect despite waiting 30 minutes.
    Chose the network you wish to extend from the drop down menu. My keychain supplied the password for the network.
    Give your base station a name and hit continue.
    Select the main base station in the list provided. This is the one connected to the internet and hit ok.
    The Airport Utility software will configure the network to accept the AirPort Express base station.
    Now all that’s left is to connect your wireless speakers to the AirPort Exppress base station. You can now play music through AirTunes while being connected to your fast 802.11n network.

    I recently setup an Airport Express in conjuction with my Extreme Base Station. I'm not really understanding how this method enables 802.11n connection speeds (via Base Station) to the internet and also allow streaming music through the Express at 802.11b/g. It's my understanding that if you want to be able to access the internet AND stream music at the same time the Express needs to join the network. In order for the Express to join the network (able to recognize the Base Station)...the Base station needs to be changed from 802.11n only to 802.11n (802.11b/g compatable)....which essentially means your connecting to the internet at 802.11b/g. If your wanting to keep 802.11n only on the base station...you would have to create a seperate network via the Express to stream music. What this means is you CANNOT access the internet and stream music at the same time. You would have to manually change Airport in the taskbar to do one or the other.
    Am I off base here? If I am missing something please let me know...because it would be great to be able to connect to the internet at 802.11n only with a multi-case rate set to 23Mbps vs. the 11Mbps (maximum) of the 802.11b/g compatable option.
    I guess what is confusing me is that my setup is basically the same as what was described above..minus having the "Extended Network" being enabled. How does extending the network change things?

  • I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

    I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.   

    Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

  • WDS networking issue - Airport Extreme (802.11n) and remote Airport Express

    *Background Info:*
    Airport Extreme 802.11n (Fast Ethernet)
    Version: 7.2.1
    Wireless Mode: Participate in a WDS network (set as main)
    Network Name: @Home
    Wireless Security: WPA/WPA2 Personal
    Channel: 1
    Airport Express
    Version: 6.3
    Wireless Mode: Participate in a WDS network (set as remote)
    Network Name: @Home
    Wireless Security: WPA/WPA2 Personal
    Channel: 1
    Radio Mode: 802.11b/g compatible
    Connect Using: AirPort (WDS)
    Connection Sharing: Off (Bridge Mode)
    Issue
    Please help as I'm having issues with my WDS network. I've setup using both the wizard and manual and also hard reset on both units to setup again but cannot get them both to communicate to one another. Both units are showing green LED under their configuration. For my last attempt, I've tried adding the Airport ID (MAC) of the Airport Express to the Access Control and also DHCP Reservations on the Airport Extreme but still no luck.
    The Airport Express (setup as remote) does not even show up in the Airport Extreme's Summary as Wireless Clients. In the WDS tab, the Airport Extreme is set up as WDS main, Allow wireless clients box checked and WDS Remotes has the Airport Express' AirPort ID in the list. On the Airport Express, WDS is set up as remote, with Allow wireless client box checked and the Airport ID of the Airport Express in the WDS Main.
    I can connect clients to both units. Both units are configured using the same Network Name and have the same WPA/WPA2 security key. The Airport Extreme (main) however is connected to my broadband so any devices or clients connected to it are able to get outside. Connected devices or clients are assigned IP address via DHCP with IP 10.0.x.x. If wifi devices or clients connect to the Airport Express (remote) they are assigned a completely different IP addresses 169.254.x.x, they are not able to browse the internet or talk to other clients connected on the 10.0.1.x network. The Internet Connection configuration on the Airport Express (remote) is Connect Using Airport (WDS) and Using DHCP. I've even tried manually and entered the IP address 10.0.1.199 that I had assigned to the Airport Express from the Airport Extreme and Router Address as IP of Airport Extreme (10.0.1.1).
    I think I've tried everything but I'm still having this problem. The remote Airport Express is not extending my existing Airport Extreme network. Any ideas???

    Christopher,
    This may or may not be helpful, or it may be something you've already tried or are aware of so I apologize if that's the case.
    I have been researching ways to set up the Dual Band Network supported by the AEBS and came across your post. I've got an AEBS and (2) AirPort Express set-up currently (AEBS is main and the Express are participating in the WDS as remotes) and I'm trying to configure one of the Express to utilize a 802.11b/g compatible network while the AEBS runs a 5Ghz 802.11n Only network.
    AAR, since the AirPort Express are 2.4Ghz 802.11b/g ONLY (no support for 802.11n), you have to be sure to set-up your AEBS first and select "802.11n (802.11b/g compatible)" in the Radio Mode drop-down on the AEBS before you attempt to connect an AirPort Express. The AEBS should be set-up as your "WDS main" and the Express should be set-up as a "WDS remote" for the network you established when you set-up the AEBS.
    Bottom line here is the Express won't be seen by the AEBS unless the AEBS is 'looking' in the 802.11b/g 2.4Ghz frequency.
    Hope this was helpful.

  • Airport Express 802.11n + Airport Extreme 802.11n 2.4ghz but not 5ghz?

    I can't get my Airport Express 802.11 to extend the network of my Airport Extreme 802.11n using 5Ghz only... but it will work with "n only 2.4Ghz"....
    any solutions?
    Message was edited by: Eric Carpenter

    Addtional info both AE's now have ver 7.5.2 installed, prior it was 7.6 and situation is still the same.

  • Airport Extreme 802.11n and AirPort Express 802.11g on same network. Speed?

    I am migrating all our Macs to 802.11n. I will have a new Extreme 802.11n base station, and all Macs will be newer models with 802.11n. However, I have an older Airport Express 802.11g that we use for the shared printer.
    I have read that the ENTIRE network will run at the speed of the slowest device. Is this true? I know that the printer can only communicate at g, but will I also see the macs having to slow down to g? If so, I will upgrade to a new Express.

    I have read that the ENTIRE network will run at the speed of the slowest device
    That's not exactly true, but it will certainly degrade the network. A new Express (N) is your best solution to maximize the speed of your network.

  • Airport Extreme 802.11n with Nortel VPN client

    Hello,
    Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
    The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

    I had the same problem and an apple apple care tech walked me through it yeterday.
    Call them, they were great.
    JK

  • Airport Express and Airport Extreme 802.11n

    Hello,
    I have a Airport Extreme 802.11n Base Station set up and a old Airport Extreme (the one before the 802.11n model) set up which extends the Base Station's signal.
    Is the old Airport Express broadcasting the 802.11n put out by the Airport Extreme even though the Express is an older model?
    Thanks!

    No, the older AX (Airport Express) is not capable of communicating in 802.11n protocol. It would be 802.11g at best.

  • Airport Extreme 802.11n sharing a disk with a -1 on the mount point

    First I have to reboot the device once a day because of the disk that disconnect for no reason like many other on the list ever since I upgraded to 7.2.1 but not sure that as to do with this problem.
    Here's is the deal, I have an Airport Extreme 802.11n with a 500GB shared on the USB port. I want to use my iPhoto Library on the 500GB. It's about 11GB, I have tranfered the library over and iPhoto is asking to choose the library I want to use. When I try to point it to the 500GB everything is greyed out. When I use a terminal and do a df command to show the mount point on my computer, I get
    /Volumes/500GB-1
    Why and where the -1 is coming from?
    How can I get /Volumes/500GB only?
    One thing I have noticed about the -1 is when I loose the disk connection it prompt me to disconnect 500GB-1 but sometime even with a -2 and -3.
    Thx!

    can I hook up my printer, scanner and external harddrive through a usb hub?
    Partially, a large number of USB printers will work with the AirPort Base Stations' USB port, but not all. I suggest that you checkout the following iFelix site to see if your printer is compatible. Similiarly, most external USB hard drives should work as well.
    However, devices that rely on two-way communications, like copiers and scanners, won't work when connected to the USB port.

  • I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

    I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true.  . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . .     STACK: / [    -mark-   /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

    Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
    Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
    Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

  • Speed issue with the AirPort Extreme (802.11n)

    Hi, I was wondering if anyone could help out with this.
    I am the Design Manager and IT Director at a publishing company where we have just upgraded to an AirPort Extreme (802.11n) base station to drive our network. We went this route as all of our machines are Mac Minis with built-in Airport and we were in a situation where re-doing a hardwire on the building was not going to be a possibility due to budget costs.
    Our new configuration seems to be running very well and has the following devices connected to the AirPort Extreme:
    Linksys Firewall Router (which was used on our old system and was requested by corporate to stay in the lineup to keep the static IP addresses we've already defined for our printers, VPN, etc. intact). The configuration on this part is modem to Linksys router to uplink port on the Airport).
    New Panther, Intel based Xserve connected to the Airport's Ethernet port 1.
    A 4 port ethernet switch connected to the Airport's Ethernet port 2 which drives four of our HP LaserJet printers.
    Ethernet port 3 is not occupied.
    All of the ethernet cords connecting our equipment are brand new.
    For the most part, everything's been running blazing fast with a remarkable speed increase over our old hardwired setup. However, I've received a few complaints about slow speeds when dragging and dropping and working with files that are stored on our Xserve - we get alot of the "spinning wheel" and the transmission speeds seem very slow.
    At present, we have several category 6 ethernet cords on backorder. I was planning on using one to take advantage of the gigabit ethernet capabilities between the Airport and the Xserve (as these are the only two elements of the network that support gigabit ethernet, besides the majority of our Mac Minis. Printers and cable modem are only 10-100 capable, so those will stand as is).
    Can anyone tell me if the gigabit ethernet cord will be the solution to this one slow aspect of the new network? Any other settings I could apply to possibly speed up the transmission time when moving files to and from our server? Good news is that every workstation in the house is getting a full 4 bars.
    Many thanks!

    PS, just wanted to point out that we are also running in bridge mode.
    Thanks!

  • No Green Light with new AirPort Extreme 802.11n

    Bought new AirPort Extreme 802.11n today. DSL works fine with LINKSYS router but only get blinking Amber light with new APE. I am using 10.3.9 so can not use Utility CD as it requires 10.4. Do I have to upgrade system to 10.4 to get APE to work.

    Thanks for help. I upgraded to OS X as you all suggested and was able to use AirPort Extreme utility to access web and get the green light. I had to determine how I was connected to internet by DSL provider (PPOE) and needed to insert my mail ID (e-mail address) and my mail password. I was able to verify the PPOE connection by imputting the IP address of the Linksys connection on my browser and going to their web page.
    It took me a while but Apple support was available as it was a new purchase and they talked me thru.
    JDB

  • AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

    Hello,
    I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
    Thanks

    Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
    Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
    BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
    Message was edited by: luvlabs

  • Having a problem in conecting with airport extreme 802.11n wi-fi on ipad2, having a problem in conecting with airport extreme 802.11n wi-fi on ipad2

    when i was trying to conect with the airport extreme 802.11n wi-fi on my ipad 2, having problem in my ipad saying that your airport base station does not have a valid IP address. make sure your airport base station is connected to your broadband modem or local network....n also another message is this airport base station doisn't have any DNS server addresses and might have trouble connecting to the internet... bt in laptop can use this internet without any having problem.... so freinds any idia to solve this problem.??

    Hi Achan Siro,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Resetting an AirPort Base Station or AirPort Time Capsule FAQ
    http://support.apple.com/kb/HT3728
    Cheers,
    - Judy

  • Speed or Performance Issue with Airport Extreme 802.11n

    Background:
    Router 1: Linksys Wireless G 2.4GHz Router WRT54G (have been using for 1.5 years)
    Router 2: Airport Extreme 802.11n Base Station Model: A1143 (just arrived)
    Macs: Intel MacBook Pro & MacBook both Newtwork Adapters upgraded to 802.11 a/b/g/n and verified via "Netwrok Utility". The Netwrok Utility also displays the link speed at 54 mb under interface info. when the Linksys G router is selected and the link speed at 144 mb when the airport extreme n is selected.
    Observation & Issue:
    Currently, for testing both network routers have been used seperatly (connected directly via the cable modem) and speeds for each latop verified via http://www.speakeasy.net/speedtest/ and normal "human" usage web surfing observations via Safari. Results below:
    1. When using the Linksys G router both the MacBook and MacBook Pro appear to be performing well and responsive with little or no wait on graphically/media intense sites such as apple.com
    The speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 8MB to 10MB speeds
    2. On the otherhand, when using the Airpot extreme both the MacBook and MacBook Pro appear to be performing slower than usual with higher waits for image and page downloads.
    In addition, the speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 2MB to 3MB speeds. Lower than what we experienced using the older router.
    Request for advide or help:
    1) Is this normal? Assuming it is not, what esle can I look at that can help me determine the root cause. The Airport Utility does not offer much assistance in this matter.
    2) Thus far I have opted to revert back to my Linksys g router. However, before returning the product... any other adivce on a potential miss in the configuration or setup would be of great help.
    3) Other's experiencing the same?
    MacBook Intel & MacBook Pro Intel   Mac OS X (10.4.8)   SUing Comcast Cable Modem

    Contacted Apple Support (have an AppleCare account) tonight and the issue has been resolved with the caveat that I cannot have a mixed (g & n) radio mode on the same airport extreme base without significant loss of performance. These are the steps I was walked through to resolve my particular case:
    1) Verify that your hardware is indeed upgraded to use n (see steps in my original post)
    2) Open the AirPort Utility (new program that was installed from the install disc under applications/utility)
    3) Click on the Airport Extreme image on the right hand column to open the Airport Extreme settings
    4) Select the "Wireless" tab, then "Radio Mode" drop down and select 802.11n only (5 GHz)
    5) Select Update to apply new settings.
    Results:
    When running the speakeasy.net/speedtest I am seeing results that are indeed better. However, the test shows that the top speed lowers a bit and jumps back up unlike when I am on my old g router, which does not have such a jump.
    This test is not perfect but a good gauge. If anyone has any other ideas to test performance more accurately, please do let me know.
    Note: Only n enabled devices now work with the n router. I will keep my old g router as a backup and for my work pc laptop.
    Hope the above helps and thanks.
    MacBook Intel & MacBook Pro Intel   Mac OS X (10.4.8)  

Maybe you are looking for