Setting up an 8 post (4 pair) wall plate with my VIZIO LCD HDTV

I just bought a E420VL VIZIO HDTV and I want to set it up with my existing built in home speaker system. What is the best way to do this?
Solved!
Go to Solution.

TJthecarve wrote:
That's just it, I don't have an amp yet as I just moved into this new house with a sound system in place but they took the amp/home theatre system with them. What kind of an amp/other setup equipment do I need?
Ah.  Well it sounds like the house has surround speakers installed.  If it is just 4 pairs, you likely don't have a subwoofer.  So probably what you want is a surround receiver and a subwoofer.  It also sounds like you may need a center speaker.  (Typical 5.1 surround systems have:  Front right, front center, front left, rear left, rear right, subwoofer.  If you have four pairs you probably either have FR/FL/RR/RL, or you may have two independent stereo-only pairs in two different locations.)
I'm pretty partial to Yamaha, they're not top-end (Klipsch/Denon/etc) but they are upper-midrange and provide EXCELLENT value.  I have two Yamaha Home Theater in a Box (HTIB) systems.  It sounds like you don't need a complete HTIB system as you have four of the required speakers.
http://www.bestbuy.com/site/Audio-Systems-Components/Home-Theater-Receivers/abcat0202003.c?id=abcat0...
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

  • I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

    I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

    Bluetooth: How to set up your Apple Wireless Keyboard

  • Need post to GL whach has been set up for Automatic posting.

    HI Guru's
    interest balances were uploaded in to different a/c and now user wants to post to the right a/c (interest a/c) but the GL master has been set up for automatic posting. this posting are done from treasury contract(loan).  is there anyway can we post a JV to this a/c?

    Hi Mythria
    I would advice you to not change the GL master account setting to post manually, as this would become an audit issue later,
    instead I would suggest to create a new GL account for interest (manual adjustment) and post JV to this new account.
    You may include this new account in your financial statement at the same place where you have the interest a/c to which you wanted to post
    Regards
    Sach!n

  • Error while posting A/R Downpayment Invoice with Excisable Tax Code.

    While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes.
    Kindly provide a solution for the same.

    SAP Note Number: 1179405
    Error -5002 when trying to copy a document with Sales BOM
    In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
    we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
    This note was really helpful and it was found in another query.
    You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
    Thanks.
    Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

  • Can i pair my BB8330 with more than one device at a time?

    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    Solved!
    Go to Solution.

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...

    I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...
    Also, when im viewing websites and i find something i wish to print, same again, if i simply click on the print option at the top right of the screen nothing happens... the only way I can print is if i copy the weblink of the site page then click on my HP eprint app and paste the web link, then select print, it prints off fine.. but its it such a pain to keep copying and pasting links or screen dumping emails just to print...

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • I paired magic mouse with my laptop in windows, but can't scroll, any solution ?

    I paired magic mouse with my laptop in windows but can't scroll, any solution ?

    Hello:
    Your post lacks enough information to respond intellligently.
    The link below addresses some issues:
    http://support.apple.com/kb/TS3039
    Barry

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • FYI: To those getting no video at all during POST on K8N Neo2 Plat

    I've been racking my brain all day/night fighting my new K8N Neo2 Platinum system. I first put together a minimal system with just memory, CPU/cooler, and AGP card and powered it up to make sure it would work. Sure enough I saw the Platinum POST screen and I went into the BIOS.
    I figure all is good so I turn off the system and install the rest of the components.Like so many others I powered back up to the disheartening screen of nothingness. The D-Bracket showed all 4 LEDs green so I was baffled as to the problem. I tried various forms of restart with the same result. With a sigh I began reverting my system back to the original bare bones set up. Same result...black screen. I tried various CMOS resets after reading everything I could find. New result: black screen but POST would always get stuck with D-Bracket indicating "Initializing Floppy Drive Controller".
    After trying various memory configurations, various CMOS resets, various AGP graphics cards, and many other things for several hours to no avail I finally got out an ancient PCI graphics card and was finally able to get video and enter the BIOS. I selected Load Fail-Safe Defaults and made sure to select AGP for the Primary Graphic's Adapter setting. I swapped the PCI card out and the AGP card back in. Still no video on the AGP card. I put the PCI card and AGP card in together and rebooted again. PCI card has video, AGP card does not.
    I still don't have my problems solved but I at least wanted to let people who are getting no video on their AGP graphics card know that they may be able to get video on a PCI graphics card. As a side effect, for whatever reason, it appears that I get fully through the POST again and the D-Bracket lights up all the LEDs.
    Hope this helps someone out there who is frustrated like I am and maybe someone can figure out what's wrong with the AGP graphics.
    The BIOS version is currently W7025NMS V1.3 092404 15:57:09...I'm going to work on updating that next and see if that fixed anything.
    Here's my system if it would work:
    MSI K8N Neo2 Platinum
    AMD Athlon 64 3500+ 90nm
    Gigabyte 3D Cooler-ULTRA GT
    OCZ 520W PowerStream
    OCZ 512MB DDR400 PC3200 EL Platinum Rev. 2 (4 sticks)
    BFG nVideo GeForce 6800 Ultra
    I made the following substitutions to test:
    OCZ DDR400 PC3200 EL Platinum Rev. 2 (1 stick in various slots, 2 sticks in various slots in single and dual channel mode)
    Corsair 512MB Value Select DDR400 PC3200 (1 stick in DIMM 1 slot)
    Radeon 9700 Pro (old AGP card -- didn't work any better than BFG card)
    Some old PCI card -- not even sure what it is (allowed me to see what was going on!)

    Nope. Cable is definately not on upside down! =)
    I get the same behavior on both floppy drives I've tried. The light only comes on when it tries to access it and it reacts as though I've put in a bad floppy. Thing is the floppy works on several computers and works on one of the floppy drives I used with this system, only while it was connected to another machine.
    I was able to update the bios to v1.4 without using a floppy by making a bootable CD and flashing from there. Still no go. I think at this point I'm ready to concede that I do in fact have a motherboard that has gone south. I've tried every combination of option I can think of in the BIOS but the AGP and Floppy Controller both appear to be fubar.
    Still, the one good thing that came out of all this is that I found out how to make bootable CDs. I'm sure to use that little trick over and over and that may make it so I don't really need these pesky floppy drives anymore at all! I'll make a post on this so we'll soon all be floppy free! =)

  • Pairing Tour 9630 with Motorola H270 Bluetooth device.

    I just purchased a Motorola H270 Bluetooth device and I can not pair it with my Blackberry Tour 9630.  When I try to enable Bluetooth on my phone, it does nothing and Bluetooth does not enable.

    Joe_C, I was unable to locate your particular Bluetooth accessory in our pairing guide information. I have also included general steps below to attempt in resolving your issue and also our Bluetooth pairing guide link. 
    http://www.verizonwireless.com/b2c/bluetooth
    Step 1 - Enable Bluetooth functionality on the Blackberry Tour (9630).
    Note: The Bluetooth power must be set to ON position to pair the device.
    From the main screen, press Blackberry/Menu Key.
    Scroll to and press Manage Connections.
    Press Bluetooth (A checkmark in the Bluetooth field represents that Bluetooth is on.)
    Step 2 - Put your fully charged Bluetooth headset into pairing mode.
    Start with your Bluetooth accessory powered off.
    Press/hold the Power button. The indicator light will initially flash
    Continue to hold until the indicator light is steadily lit blue.
    Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
    Step 3 - Pair the Blackberry Tour (9630) with a Bluetooth Accessory.
    From the main screen, press Blackberry/Menu Key.
    Scroll to Set Up 
    Press Set up Bluetooth
    Place accessory in pairing mode. See accessory pairing instructions.
    Display show Add Device: Press Search to search for devicesl
    Phone displays Searching For Devices.
    Select XXXAccessory NameXXX, press trackball to select
    Phone displays Waiting For XXXAccessory NameXXX.
    Phone displays Enter numeric passkey For XXXAccessory NameXXX.
    Enter 0000 and press the enter key (See accessory instructions as passcode may vary.)
    Phone displays Pairing complete.  Connect to XXXAccessory NameXXX?
    Press Yes
    Phone displays Waiting For XXXAccessory NameXXX.
    Phone displays Connection to XXXAccessory NameXXX succeeded.

  • Pairing iphone 5 with plantronics M165

    I have been using the Plantronics M165 earset with my iPhone 4 (OS 6.12), paired via bluetooth. I disconnected the M165 earset from iPhone 4 and  I tried to connect it with my iPhone 5 (using the same procedure that I used when I was connecting it with iphone 4). But when I turn ON bluetooth from my iPhone 5 (OS 6.12), it does not discover the M165 earset. It keeps on searching....but it finds nothing. Though the two iphones (4 & 5) use the same OS, I cannot also pair my two iphones to each other via bluetooth. Now I cannot even pair M165 back with my iphone 4 I need help......
    Txs

    I've got the same problem but I found the following solution, by pairing again the two dispos.
    as far as the plantronics M165:
    Turn on your device’s Bluetooth feature.
    Turn the headset on.
    Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside.
    On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. It will appear as "PLT_M155" or "PLT_M165" in your list of devices.
    If prompted for a passkey, enter 0000 (four zeros). Note: Many phones do not prompt for a passkey.
    hope will work for you as well.

  • How can I remove or delete my posts and resign my membership with Adobe?

    How can I remove or delete my posts and resign my membership with Adobe?

    At the bottom see terms of use you own your content and can ask for its removal but it may remain in the sites backup.  The problem is your responsible to remove it and the way the site code works once an append is made to your's.  Your content becomes locked and you can no longer delete it. IMO part (c) is broken....
    3. Your Content.
    3.1 Ownership. You retain all rights and ownership of your content. We do not claim any ownership rights to your content.
    3.2 Licenses to Your Content in Order to Operate the Services. We require certain licenses from you to your content to operate and enable the Services. When you upload content to the Services, you grant us a non-exclusive, worldwide, royalty-free, sub-licensable, and transferrable license to use, reproduce, publicly display, distribute, modify (so as to better showcase your content, for example), publicly perform, and translate the content as needed in response to user driven actions (such as when you choose to store privately or share your content with others). This license is only for the purpose of operating and improving the Services.
    3.3 Our Access. We will not access, view, or listen to any of your content, except as reasonably necessary to perform the Services. Actions reasonably necessary to perform the Services may include (but are not limited to) (a) responding to support requests; (b) detecting, preventing, or otherwise addressing fraud, security, unlawful, or technical issues; and (c) enforcing these terms.
    3.4 Sharing Your Content.
    (a) Sharing. Some Services may provide features that allow you to Share your content with other users or to make it public. “Share” means to email, post, transmit, upload, or otherwise make available (whether to us or other users) through your use of the Services. Other users may use, copy, modify, or re-share your content in many ways. Please consider carefully what you choose to Share or make public as you are entirely responsible for the content that you Share.
    (b) Level of Access. We do not monitor or control what others do with your content. You are responsible for determining the limitations that are placed on your content and for applying the appropriate level of access to your content. If you do not choose the access level to apply to your content, the system may default to its most permissive setting. It’s your responsibility to let other users know how your content may be shared and adjust the setting related to accessing or sharing of your content.
    (c) Comments. The Services may allow you to comment on content. Comments are not anonymous, and may be viewed by other users. Your comments may be deleted by you, other users, or us.
    3.5 Termination of License. You may revoke this license to your content and terminate our rights at any time by removing your content from the Service. However, some copies of your content may be retained as part of our routine backups.
    3.6 Feedback. You have no obligation to provide us with ideas, suggestions, or proposals (“Feedback”). However, if you submit Feedback to us, then you grant us a non-exclusive, worldwide, royalty-free license that is sub-licensable and transferrable, to use, reproduce, publicly display, distribute, modify, and publicly perform the Feedback.
    3.7 Account Information.
    You are responsible for all activity that occurs via your account. Please notify Customer Support immediately if you become aware of any unauthorized use of your account. You may not (a) Share your account information (except with an authorized account administrator) or (b) use another person’s account. Your account administrator may use your account information to manage your use and access to the Services.

  • TS3253 My Iphone 4S version 6.1.1 will not automatically connect to my bluetooth in my car.  It is paired and registered with the car bluetooth, but I have to select the device each time the car is started.

    My IPhone 4S with version 6.1.1 will not stay connected to the bluetooth in my 2012 Subaru Outback.  The phone is paired and registered with the bluetooth in the car, but each time the ignition is turned off the phone loses connection with the bluetooth and I have to select the device again.

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • Can you pair an ipad3 with an andriod device

    can you pair an ipad3 with an andriod device

    Here's the Personal Hotspot section of the iPad User Manual.  Maybe you can set it up using WiFi.  Sorry about the added bullet (line) numbers.  They came from the cut and paste automatically.
    Personal Hotspot You can use Personal Hotspot (on Wi-Fi + cellular models) to share an Internet connection with a computer or other device—such as an iPod touch or iPhone—connected to your iPad via Wi-Fi. You can also use Personal Hotspot to share an Internet connection with a computer connected to iPad via Bluetooth or USB. Personal Hotspot works only if iPad is connected to the Internet over the cellular data network.
    Note: This feature may not be available in all areas. Additional fees may apply. Contact your carrier for more information.
    Share an Internet connection: Go to Settings > General > Cellular and tap Set Up Personal Hotspot—if it appears—to set up the service with your carrier.
    After you turn on Personal Hotspot, other devices can connect in the following ways:
    W-Fi: On the device, choose your iPad from the list of available Wi-Fi networks.
    USB: Connect your computer to iPad using the cable that came with it. In your computer’s Network preferences, choose iPad and configure the network settings.
    Bluetooth: On iPad, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect iPad with your device, refer to the documentation that came with your computer.
    When a device is connected, a blue band appears at the top of the iPad screen. Personal Hotspot remains on when you connect with USB, even when you aren’t actively using the Internet connection.
    Note: The Personal Hotspot icon appears in the status bar of iOS devices using the Personal Hotspot.
    Change the Wi-Fi password for iPad: Go to Settings > Personal Hotspot > Wi-Fi Password, then enter a password of at least 8 characters.
    Monitor your cellular data network usage: Go to Settings > General > Usage > Cellular Usage.

  • Getting 3 post codes after turning on with no post 990FXA-GD80

    I just put this build together today and i am recieving 3 post codes. It starts with 19 then to FF then 2b and repeats. I have a FX-6300 Veshera CPU and from what i am reading its due to outdated Bios. Can anyone confirm?

    Quote from: KHaws777 on 20-July-13, 14:43:16
    I just put this build together today and i am recieving 3 post codes. It starts with 19 then to FF then 2b and repeats. I have a FX-6300 Veshera CPU and from what i am reading its due to outdated Bios. Can anyone confirm?
    Have you got it running yet?  I have the same set up as you and am running the into the same issue.  I thought I had a bad CPU but am getting the same problem with my new CPU.   I am thinking the next step is the memory.  The crucial ballistics didn't get very good reviews

Maybe you are looking for