Setting up an audio interface with logic 9

hey im still pretty new to this. i have a powerbook G4 with logic pro 9. i just got a steinberg CI1 usb audio interface which i was told would work with logic. (http://www.steinberg.net/en/products/hardware/ci1/ci1_start.html) im recording vocals and im having trouble with logic picking up any audio. ive installed the drivers and my mac has no problem discovering the interface. i went into logic and it intilized the core audio, and then i went to "prefrences" and set the audio input/output to the interface. i can hear myself with the headphones i connect to the interface and i can also hear the instrumental music coming from logic. The problem is logic wont pick up any of my vocals. I set the track to record enable and i still have nothing. Any help? Thanks!
oh and i tried it with garageband and it worked fine, so im pretty sure it has to do something with the setting on logic. any help would be appreciated!

Hey bud i was able to sort it quite easily in the end!
Ensure u have latest drivers installed!
Restart your mac! Ensure interface is plugged in
Load logic!
Click the + to add a new track:- select audio instrument!
Enable record and monitoring! Choose the channel you want to record from!
You may have to select your interface as your output if monitors are being used through the interface!
Hey presto!

Similar Messages

Help setting up my audio interface with logic pro x

Hi everyone,
I am a newbie with regards to home recording and using Logic Pro X and I need some help and advice about setting up my home recording set up for the first time. I want to connect my synthesizer Korg Triton Extreme to my Audio Interface Steinberg UR22 to my Apple Imac computer.
What I would like is if I can create backing tracks or use pre-set sounds or drum patterns from my Korg Triton Extreme synthesizer and then transfer them onto Logic Pro X to help me compose songs.
How should I go about doing this? And what settings should be applied to Logic Pro X so that I can hear the songs as they are being played and recorded?
So far I have connected my synthesizer's two outputs to the two inputs on my Steinberg UR22 Audio Interface. I have also connected the USB point on the audio interface to my Apple Imac computer. But when I have tried to add a drum track from the Korg Triton Extreme synthesizer I cannot seem to add any of the drum sounds. Nothing appears to be recorded despite me trying several times. I cannot hear any sound coming from the audio interface either despite having a pair of headphones plugged into it.
I would also like to find a way to synchronise the drum tracks I want to record from my Korg Triton Extreme synthesizer to Logic Pro X. So that when I click on the record button on Logic Pro X the synthesizer track automatically starts playing and recording on Logic Pro X. Whats the best way to do this? And will I need a Midi cable for any of the things I want to do?
Many thanks,
James.

Hi James
I just got myself a macbook pro and logic pro X, and I also have a Triton Extreme and the UR22. So I know what the learning curve can be like - it's been a long time since I've used a sequencer in a computer.
I assume you are aware of the difference between audio and midi? With your current setup, all you can do is play your Triton and record the sounds as audio loops - you should be able to hear the Triton through headphones plugged into the UR22, and (assuming you have installed the UR22 driver) you can also hear the Triton through your computer speakers (or headphone output) once you tell Logic there is sound coming in from the UR22.
If you want to be able to play the sounds in logic pro, or transfer drum patterns (which are in midi format), you will definitely need midi cables (you may be able to use midi by connecting the Triton's USB out to your computer, but having not tried that, I don't know if it will work - it does on more recent synths)
paul

How to set up an audio interface with logic express

i just got a deck board tascam us-1641, downloaded the driver, plugged in my keyboard but nothing is happening. What am I missing or not doing?

You probably have to set up Logic to use your audio interface.
You'll find these settings under the Logic menu > Preferences > Audio. Then you can select the preferred audio interface.

Thunderbolt audio interface with Logic Pro?

Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

re: Thunderbolt
bill borez wrote:
They'll be a whole load of them in the not too distant future.
hehehehe
http://www.youtube.com/watch?v=kTTSsB92L_s
at about :48

Audio Interfaces With Logic Express.

Hi,
I'm new to the Mac world, I've just bought one of the 20" iMac's with duo processors. I want to run Logic Express and eventually move up to Logic.
I come from PC back ground, I run I use a Behringer UB1202FX mixer, Tannoy Reveal Passive Monitors, Oxygen 8 MIDI keyboard and Cambridge Audio A1 MK3 integrated amp. plugged into a 24 bit /96khz soundcard.
I know I've to get a external audio interface to get 24 bit sound and to allow me to plug in my external equipment. Does anyone have recommendations? I looking for something around £300 maximum (not sure what that is in $)
Thanks.
Pentium 4 Windows XP Dell

Hi,
you don't say how many ins you'll need.
There's a good handfull out there for you too choose from,
USB or Firewire? Firewire will be my bet.
try those to see if tou like 'em, M-Audio's: Firewire 410
http://www.m-audio.com/products/en_us/FireWire410-main.html
more ins: firewire 1814 -
http://www.m-audio.com/products/en_us/FireWire1814-focus.html
try to see the prices here in pounds:
http://www.dolphinmusic.co.uk/?categoryid=aa5045ac8dbda1110af5783d9c9b8f89&order=&page=shop%2Fmanufacturer-stock&manufa cturerid=54
Anyway, there are others, but for the price you're asking, it's a good starting point and you get a good product!
regards,
Jorge

Using Multiple Audio Interfaces With Logic (Edirol FA-101)

I just bought tiger so that i could aggregate my two edirol fa-101's and they still dont work. They cut out and the sync buttons flash. Its as if the computer ant deal with so much information. I stop all large processes on my g5 dual 1.8 and try again. They cut out whether im in Logic or not. One works ok but still cuts out sometimes, adding another has made the problem twice as bad. Any advice please. Ive talked to edirol and they have no idea what to do... Thanks, Ben

According to their web page, the FA-101 does accept SPDIF. They should be wired together with one unit should be set up as a master and the other as a slave. You units should sync up then.
As they are right now, the two units are competing to sync with Logic, causing the sound to pop and cut out.
jord

Audio Interface with Logic-best bet?

I've been using a Firepod for the last 2 years and it's fine but today a friend of mine brought over a MOTU MK3 Traveller and it sounds so much better. He got it recently but has to sell it and offered it to me for a good deal. It's got me thinking that maybe I should have a look at some other stuff before committing so now I'm looking at the Duet or maybe even an Ensemble. The Firepod was nice because of all the inputs but I could live with only two(Duet) but would much prefer four mic inputs(Ensemble).
The Ensemble might be out of my budget at the moment so do I buy the MOTU MK3 Traveller(four inputs) off my friend or get the Duet?
Any Advice?

I have and love the Apogee Duet, and it has served me well so far at home and doing field recordings with my Macbook Pro.
For instance, last week I recorded a sitar concert, and brought a small setup - a matched set of Rode NT1As, an A.R.T. MPA GOLD two channel tube pre, and my Macbook Pro/Duet combo. I barely had any time to get situated, and what's more, I got pulled into setting levels for the PA, which was kind of dicey, since the sitar master opted to forgo doing a soundcheck before the concert, so I had to wing it.
Before I scooted over to the board for the PA, I took an educated guess at some levels for the Duet and MPA GOLD. The Duet has such a low noise floor and such ample headroom that my educated guess was more than good enough. What's more, it is quite easy to use, so it took no time at all to dial in the gain setting I wanted, using the Maestro software that comes with it. The recording sounds gorgeous, considering the rushed circumstances of its setup. I would describe the quality of the Duet's sound as "crystalline."
That said, if you are looking for more channels in but are not ready to spend Ensemble money, we have a Mackie Onyx 1620 at work (or 1640 - I don't remember) that I use all the time for tracking all kinds of performers. Its pres are quiet and transparent, although they only provide so much gain. We run 4 channels of outboard pres through compressors and into four of the Onyx's pres. 8 XLR ins, 8 more ins arrayed in stereo pairs, all 16 channels are piped via Firewire 400 into Logic, and the two output channels back out. Plus, its a great mixer for conventional mixing purposes - good eq, simple, sturdy design. Not bad for under $1,000. I just saw they have a newer version out - the Onyx 1620i, but I don't know what that "i" is designating as far as improvements. They make Onyx mixers in several models, each with a different number of channels, so maybe one of these would work for you...
I hope this was helpful!

Problem Using Zoom H4 as an Audio Interface with Garageband

I'm new to GB and I am having problems getting started using my Zoom H4 as an Audio Interface with Garageband on my iMAC.
I'm fairly certain that I have the connection and all of the setting configurations correct, and yet I cannot get any sound from the H4 into GB.
I do see the sound volume registering in the Input Level window of the H4, but not in GB.
Here is what I see in my Garageband:
Preferences >
Audio/MIDI >
- System Setting
- Built-in Microphone
- Built-in Input
- H4 Audio IN (when H4 is connected to the iMAC via USB)
Of course I have selected the H4.
Any help or insight would be greatly appreciated. Operators standing by!

I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info?

I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?

I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?

I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info?

Using Digi 003 interface with Logic Studio or Pro

I currently have a modified (Black Lion Audio) Digi 003 Rack interface that I use with Pro Tools, but would like to get Logic Studio (or Pro). I have heard 50% say that the Digi 003R or Mixer won't work (properly) with Logic and I have heard another 50% say that it works fine. Can somebody please end this debate once and for all, so I can make the big $500-$1000 decision. I'm really itching to get Logic so I can use all of its great features. I would like to hear that it works fine, but if not, I'd rather know the facts before wasting my money. Thank you to anybody who can put this question to rest.

Lets clear up some things - Logic Studio comes with Logic Pro. . . so that's $500. Logic Pro 7 is old and you don't need it anymore, it WAS $1000. So, no need to spend a grand on Logic.
Next, 003R works absolutely fine as an interface with Logic. The mixer won't work as a control surface (although it will work fine as an interface) because Digi's control surface stuff is proprietary and isn't made to work with Logic.
So, to sum up - Logic Studio is Logic Pro 8 and a ton of other apps and its only $500.
003 Rack works fine with Logic.

Access Virus Ti Polar - Interface With Logic Pro

I just purchased the Ti Polar and the instructions claims it can act as an independent audio interface for Logic Pro. I installed the software and see it under my "preferences" but nothing works. Does anyone have any experience with this? The synth is tremendous and again according to the instructions can control Logic, Ableton, Reason, etc...
Thanks.

Did you go into the Audio preference in Logic and select the Ti from the drop down list? If it doesn't show in this list, does the Ti show in Audio Midi Preferences in the Utilities folder?
As far as I remember, the Ti is only a 16 bit audio interface whilst the Apogee gear is 24 bit. Access mention some massive sample rate / bit depth in their marketing but that is for the analog converters only, not the audio interface via USB specs. It's really a bit of a con.
I sold my Ti because it's not what Access advertise both in sound quality (as a plug in) and as far as "Total Integration" is concerned. I had all sort of problems with sync and arps going out of sequence. The moment I started using a dedicated audio interface instead of the Ti, all my problems with latency, popping and crackling stopped. I sold it and bought Zebra 2.
HTH.
D.

Can anybody explain me how to sample and play audio files with logic's EXS2

can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
i cant find a way to upload and manage my own audio content on this sampler...

i uderstand , thanx...
i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
Thanx

Not too hot about the jazz the Apple drum loops, does anyone know of a good drum software to interface with logic? Or, a loops source to get quality brush samples.

Logic has no decent jazz brushes in there drum loops!! What to do???

Hi j232..for interfacing drum i would suggest Superior drummer 2.0. It has all the loops u want plus it keeps getting the expansion packs (i mean u have to buy it )which are genre based so as of now it has everything from vintage kits to new age. Also it says on the site(toontrack.com) that its tested with logic.
I used it in mixcraft on my PC. and it was very easy, real and satisfying for me. Ordered it now for my new mac to interface with logic pro.
hope that helps
cheers

What's the best audio interface for Logic Pro and Mac?

What's the best audio interface for Logic Pro and Mac?

Depends on the computer model and if you have unlimited funds.

Recommendations for audio interface with new mac pro to avoid latency?

Hi friends,
I have a new Mac Pro on order for editing video in FCPX, but Presonus says my older Presonus Firebox won't work with Mavericks and the new Mac Pro. Do you have a recommendation for a replacement?
I only use the interface to drive 2 powered expternal speakers and a headset, so I don't need something super sophisticated.
As I read about units, almost all come with USB 2.0 connections. But the new Mac Pro only offers USB, Thunderbolt 2, Dual Gigabit Ethernet, and HDMI 1.4 Ultra HD inputs. If I can't find a fairly inexpensive audio interface with USB 3.0, I'd have to go through another connection to get into the Mac Pro.
The key for me is to make sure and avoid latency, a critical issue for editing video.
Any advice is much appreciated. Thanks. Duncan

Thanks Mark and Smokerz,
Your point about USB2 working in USB3 ports is something I wasn't aware of. That opens a lot of doors for me. And I'll look into the Yamaha sound board as one possibility.
Thank you both for helping me.
Duncan

Setting up an audio interface with logic 9

Similar Messages

Maybe you are looking for