Setting Up An Interface

I bought a Tascam US-122 around 2002 and I'm trying to make it work on a Macbook Pro with 10.5.5. I downloaded the driver from Tascam's site (http://www.tascam.com/products/us-122;9,15,68,19.html) and messed around with the settings but I still can't get it to work. Not only does Garageband not detect it, but Sound in System Preferences doesn't detect it and the lights on the interface don't turn on. I know it works, it works on my G4. What am I doing wrong?

Yes, also on a lot of the macbooks the front usb port will not power some devices. Maybe the same with the Pro.

Similar Messages

Getting compilation error: java.util.Set is an interface. This interface is not supported.

Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Hello,
Generic java collections can only be handled in a very generic, weakly
typed manner.
Take a look at the
http://workshop.bea.com/xmlbeans/guide/conXMLBeansSupportBuiltInSchemaTypes.html
and also
http://workshop.bea.com/xmlbeans/guide/conJavaTypesGeneratedFromUserDerived.html
You might also ask your question to the XMLBeans newsgroup:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.xmlbeans
Regards,
Bruce
Sanjay wrote:
>
Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Unable to set an unnumbered interface

We are trying to set up two interfaces with the same IP address, both up at the same time. It looks like the IFF_UNNUMBERED flag should do this, and is used by one interface to "borrow" the address of another interface. However, we can't get it to work directly via the ifconfig command, and the only examples we can find are for tunnels using tdst or tsrc. Can anyone point us to either a snippet of shell code using ifconfig or a snippet of C code using ioctl?
Thanks,

SunChallenged wrote:
We are trying to set up two interfaces with the same IP address, both up at the same time.Why are you trying to do this? What do you hope to accomplish? There may be better ways of making it happen.
It looks like the IFF_UNNUMBERED flag should do this, and is used by one interface to "borrow" the address of another interface. However, we can't get it to work directly via the ifconfig command, and the only examples we can find are for tunnels using tdst or tsrc. Can anyone point us to either a snippet of shell code using ifconfig or a snippet of C code using ioctl?No, I don't think this is appropriate for ethernet interfaces (which is what I assume you're using).
Darren

Setting of listener interface to any abnormal image

I would like to know is there is a way to set the listener interface to the abnormal images i.e for circles, half circles other than squares/ rectangles since they are default.

Offcourse its possible.. but tells us something more.. about how are u adding images.. to your program.. are your images off-screen image.. or you have made it component?
its difficult to say anything from information you have provided.. better you paste some lines of code..(using formatting tags).. !!

Cisco ASA: Assign same rule sets to multiple interfaces

Hi guys,
We want to connect to physical interfaces from ASA to each Nexus core, so is there any possibility to assign same rule set to both interfaces simultaneously? (a kind of zone aggregation).
Regards.
Jesus

Hi
What is Your ASA Code running on your ASA appliance , From ASA code 8.3 you can have global access rule .
lobal access rules.
8.3(1)
Global access rules were introduced.
The following command was modified: access-group.
Interface access rules are bound to any interface at the time of their creation. Without binding them to an interface, you can not create them. This differs from the Command Line example. With CLI, you first create the access list with the access listcommand, and then bind this access list to an interface with the access-group command. ASDM 6.3 and later, the access list is created and bound to an interface as a single task. This applies to the traffic flowing through that specific interface only.
Global access rules are not bound to any interface. They can be configured through the ACL Manager tab in the ASDM and are applied to the global ingress traffic. They are implemented when there is a match based on the source, the destination, and the protocol type. These rules are not replicated on each interface, so they save memory space.
When both these rules are to be implemented, interface access rules normally takes the precedence over the global access rules.
HTH
Sandy

Cisco 2504 controller, setting management wlan interface Vlan Identifier to anything but 0 loses management ability

I have setting the Management Interface Vlan Identifier to 0 or untagged.
If i change this to a vlan, I am unable to manage the device, is this correct?
Steve

If u make it untagged then specify the NATIVE vlan on the switchport..
If u tag the management interface, then dont configure the native vlan on the switchport..
Both the cases u will be able to access!!
Lemme know if this answered ur question!!
Regards
Surendra

Setting External Audio Interface as default output

Hi.
I have a MacBook Pro running Mountain Lion 1.8.5 with the following audio output options:
Built-In Output
MOTU UltraLite Audio Interface
Bluetooth speaker.
I have the UltraLite setup as my default for "Use this device for sound output" and "Play alerts and sound effects through this device". And it works flawless. On occassion I have to play the audio to the Bluetooth speaker. And that works great too. However if I turn off the spearker the Mac defaults back to "Built-In Output". How can I set it to default back to the UltraLite instead? (Ps-I don't mind messing with files deep in the system).
Thanks,
David

Hi.
I assume you created WAD template.
In this WAD you inserted 2 webitems:
1. analysis item with dataprovider assigned to your query
2. chart item with the same dataprovider
If so you should set, as mentioned above, HIDDEN for analysis item (analysis item shows you query data - table) and VISIBLE fro chart item.
So by default your report data will be hidden and chart visible.
If you want to switch within WAD you should create any button "show/hide table" and attach command "SET_WEBITEM_PROPERTIES" and set visible for analysis item.
Regards.

Setting the source-interface in a tcl script for email.

So once again I am trying to figure this out and failing miserably. The only thin I can think of at the moment is that I need to tell it to source from a specific vrf interface. I've tried looking through possible enviornment variables. Hoping I could set it that way but have yet to find one. I have read varios settings for source-interface and attempted them. But fail every time with:
vpn_failure.tcl: smtp_send_email: error connecting to mail server:
EEM Version:
sho event manager version
Embedded Event Manager Version 4.00
Component Versions:
eem: (rel4)1.0.4
eem-gold: (rel1)1.0.2
eem-call-home: (rel2)1.0.0
Below is the stock format for sending the email from the script. If someone could guide me in the correct way to set this up to source the interface that would be awesome.
# create mail form
action_syslog msg "Creating mail header for vpn_failure.tcl script..."
set body [format "Mailservername: %s" "$_email_server"]
set body [format "%s\nFrom: %s" "$body" "$_email_from"]
set body [format "%s\nTo: %s" "$body" "$_email_to"]
set _email_cc ""
set body [format "%s\nCc: %s" "$body" ""]
set body [format "%s\nSubject: %s\n" "$body" "VPN Failure Detected: Router $routername Crypto tunnel is DOWN. Peer $remote_peer"]
set body [format "%s\n%s" "$body" "Report Summary:"]
set body [format "%s\n%s" "$body" "   - syslog message"]
set body [format "%s\n%s" "$body" "   - summary of interface(s) in an up/down state"]
set body [format "%s\n%s" "$body" "   - show ip route $remote_peer"]
set body [format "%s\n%s" "$body" "   - show crypto isakmp sa"]
set body [format "%s\n%s" "$body" "   - show crypto session detail"]
set body [format "%s\n%s" "$body" "   - show crypto engine connection active"]
set body [format "%s\n%s" "$body" "   - show ip nhrp detail (DMVPN only)"]
set body [format "%s\n%s" "$body" "   - show log"]
set body [format "%s\n\n%s" "$body" "---------- syslog message ----------"]
set body [format "%s\n%s" "$body" "$syslog_msg"]
set body [format "%s\n\n%s" "$body" "---------- summary of interface(s) in an up/down state ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_interface_brief_up_down"]
set body [format "%s\n\n%s" "$body" "---------- show ip route $remote_peer ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_route"]
set body [format "%s\n\n%s" "$body" "---------- show crypto isakmp sa ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_isakmp_sa"]
set body [format "%s\n\n%s" "$body" "---------- show crypto session detail ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_session_detail"]
set body [format "%s\n\n%s" "$body" "---------- show crypto engine connection active ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_engine_connection_active"]
set body [format "%s\n\n%s" "$body" "---------- show ip nhrp detail (DMVPN only) ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_nhrp_detail"]
set body [format "%s\n\n%s" "$body" "---------- show log ----------"]
set body [format "%s\n\n%s" "$body" "$show_log"]
if [catch {smtp_send_email $body} result] {
    action_syslog msg "smtp_send_email: $result"

I got this far, saw the MAXRUN error, bumped that out and then turned on debugging. I am still not connecting to the mail server. So I don't think I am reaching the mail server yet. I don't think it is using the sourceinterface. In debugging everyting in the script works except for the mail portion.
Jul 29 16:01:00.334: %HA_EM-6-LOG: vpn_failure.tcl: Creating mail header for vpn_failure.tcl script...
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: Process Forced Exit- MAXRUN timer expired.
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     while executing
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: "action_syslog msg "smtp_send_email: $result""
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     invoked from within
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: "$slave eval $Contents"
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     (procedure "eval_script" line 7)
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     invoked from within
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: "eval_script slave $scriptname"
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     invoked from within
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: "if {$security_level == 1} {       #untrusted script
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:      interp create -safe slave
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:      interp share {} stdin slave
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:      interp share {} stdout slave
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl: ..."
Jul 29 16:02:36.464: %HA_EM-6-LOG: vpn_failure.tcl:     (file "tmpsys:/lib/tcl/base.tcl" line 50)
Jul 29 16:02:36.465: %HA_EM-6-LOG: vpn_failure.tcl: Tcl policy execute failed:
Jul 29 16:02:36.465: %HA_EM-6-LOG: vpn_failure.tcl: Process Forced Exit- MAXRUN timer expired.
Debugging On:
Jul 29 16:28:51.471: [fh_smtp_debug_cmd]
Jul 29 16:28:51.472: %HA_EM-6-LOG: vpn_failure.tcl : DEBUG(smtp_lib) : smtp_connect : attempt 2
Jul 29 16:29:24.473: [fh_smtp_debug_cmd]
Jul 29 16:29:24.473: %HA_EM-6-LOG: vpn_failure.tcl : DEBUG(smtp_lib) : smtp_connect : attempt 3
Jul 29 16:29:57.475: [fh_smtp_debug_cmd]
Jul 29 16:29:57.475: %HA_EM-6-LOG: vpn_failure.tcl : DEBUG(smtp_lib) : smtp_connect : attempt 4
Jul 29 16:30:30.478: [fh_smtp_debug_cmd]
Jul 29 16:30:30.479: %HA_EM-6-LOG: vpn_failure.tcl : DEBUG(smtp_lib) : smtp_connect : attempt 5
Jul 29 16:31:00.482: %HA_EM-6-LOG: vpn_failure.tcl: smtp_send_email: error connecting to mail server:
cannot connect to all the candidate mail servers
Jul 29 16:31:00.483: %HA_EM-6-LOG: vpn_failure.tcl: vpn_failure.tcl script completed
event manager environment _email_server 10.79.1.126
event manager environment _email_from [email protected]
event manager environment _email_to [email protected]
interface Port-channel1.101
description MGMT-1
encapsulation dot1Q 101
vrf forwarding MGMT-1
ip address 10.79.1.252 255.255.255.0
ip nat inside
ip virtual-reassembly
redundancy rii 101
redundancy group 2 ip 10.79.1.254 exclusive decrement 10
end
#----------------------- send mail ----------------------
# create mail form
action_syslog msg "Creating mail header for vpn_failure.tcl script..."
set body [format "Mailservername: %s" "$_email_server"]
set body [format "%s\nFrom: %s" "$body" "$_email_from"]
set body [format "%s\nTo: %s" "$body" "$_email_to"]
set _email_cc ""
set body [format "%s\nCc: %s" "$body" "[email protected]"]
set body [format "%s\nSourceintf: %s" "$body" "port-channel1.101"]
set body [format "%s\nSubject: %s\n" "$body" "VPN Failure Detected: Router $routername Crypto tunnel is DOWN. Peer $remote_peer"]
set body [format "%s\n%s" "$body" "Report Summary:"]
set body [format "%s\n%s" "$body" "   - syslog message"]
set body [format "%s\n%s" "$body" "   - summary of interface(s) in an up/down state"]
set body [format "%s\n%s" "$body" "   - show ip route $remote_peer"]
set body [format "%s\n%s" "$body" "   - show crypto isakmp sa"]
set body [format "%s\n%s" "$body" "   - show crypto session detail"]
set body [format "%s\n%s" "$body" "   - show crypto engine connection active"]
set body [format "%s\n%s" "$body" "   - show ip nhrp detail (DMVPN only)"]
set body [format "%s\n%s" "$body" "   - show log"]
set body [format "%s\n\n%s" "$body" "---------- syslog message ----------"]
set body [format "%s\n%s" "$body" "$syslog_msg"]
set body [format "%s\n\n%s" "$body" "---------- summary of interface(s) in an up/down state ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_interface_brief_up_down"]
set body [format "%s\n\n%s" "$body" "---------- show ip route $remote_peer ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_route"]
set body [format "%s\n\n%s" "$body" "---------- show crypto isakmp sa ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_isakmp_sa"]
set body [format "%s\n\n%s" "$body" "---------- show crypto session detail ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_session_detail"]
set body [format "%s\n\n%s" "$body" "---------- show crypto engine connection active ----------"]
set body [format "%s\n\n%s" "$body" "$show_crypto_engine_connection_active"]
set body [format "%s\n\n%s" "$body" "---------- show ip nhrp detail (DMVPN only) ----------"]
set body [format "%s\n\n%s" "$body" "$show_ip_nhrp_detail"]
set body [format "%s\n\n%s" "$body" "---------- show log ----------"]
set body [format "%s\n\n%s" "$body" "$show_log"]
if [catch {smtp_send_email $body} result] {
    action_syslog msg "smtp_send_email: $result"
action_syslog msg "vpn_failure.tcl script completed"
#------------------ end of send mail --------------------

Skill sets required for interfacing with third party

Hi we are currently using LSO 603 , and we are scrom compliant , we want to build an interface with third party , where we have all our manufacturing courses stored . so client wanted to know the skills sets required for building an interface. please advise
Thanks!

Skills required.....
ABAP including BAPI's/Function Modules
understanding of Performance management and how it hangs together.
Happy New Year.
Jules.

Best set up for interface for garage band

I first off want to thank you for taking the time to read my post and to rant about how great you guys have been with previous questions i've had.
Hi i'm using a eurorack 802b and am not sure how to properly set this up. Should I be running the sound out of the headphone port on the computer into the mixer and then from the mixer back to the line in on the comuter?
Or should I just be using the line in on the computer to process the mic into the macbook?
Either way i'm concerned about what would be the best settings on the computer and mixer to make my vocals sound great. I keep my lows halfway up and my mids up high and my highs halfway up. I keep the gain on the mixer at +10 and then the mic volume halfway up. Now garageband has it's own mic volume.. what should I set that to? I'm not really getting the same results on my macbook I did with my pc, so i'm done trying different setups that haven't worked properly and have elected to ask you more experienced folks.

As far as setting levels, we're dealing with digital recording, so there are not as many rules as far as gain structure. Experiment with preamp gain, and how close you are to the microphone until you find the sound you want to capture, while being careful not to go into clipping. That's the beauty of digital - if you don't like how it turned out, just hit delete and start over. Most people would advise to not use much EQ during the initial recording. The intitial recording is your 'raw material' so it can be beneficial to have a very neutral sound, allowing more freedom to apply EQ and other effects during the mixing process. Force yourself to get the best performance you are capable of, without the benefit of hearing yourself with processing (EQ, reverb, etc). If you can summon a great performance without the help of those things, it will be even better once you apply them during your mixdown. These are just some general suggestions. Above all just have fun recording.
RW

Problem setting up 2 interfaces against the same destination

Hi,
I've been trying to to configure one SunFire v240 with two extra ethernet interfaces. I can configure it but all traffic (at least outgoing) still uses only one of the interfaces.
I can ping both interfaces from another machine. But if I unplug one cable both interfaces are unreachable.
I did the following to setup the interfaces:
ifconfig bge1 unplumb
ifconfig bge1 plumb
ifconfig bge1 192.168.10.101 netmask 255.255.255.0 broadcast 192.168.10.255 up
ifconfig bge2 unplumb
ifconfig bge2 plumb
ifconfig bge2 192.168.10.102 netmask 255.255.255.0 broadcast 192.168.10.255 up
netstat -rnRouting Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.10.0 192.168.10.101 U 1 698265 bge1
192.168.10.0 192.168.10.102 U 1 0 bge2
136.225.115.0 136.225.115.159 U 1 9602 bge0
224.0.0.0 136.225.115.159 U 1 0 bge0
default 136.225.115.2 UG 1 13026
127.0.0.1 127.0.0.1 UH 301081627713 lo0
uname -aSunOS v240x763 5.9 Generic_118558-14 sun4u sparc SUNW,Sun-Fire-V240
ifconfig -alo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 136.225.115.159 netmask ffffff00 broadcast 136.225.115.255
bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet 192.168.10.101 netmask ffffff00 broadcast 192.168.10.255
bge2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 8
inet 192.168.10.102 netmask ffffff00 broadcast 192.168.10.255
>
Is there any known problem with this setup?
Best Regards,
Christer

This is due to the routing tables, which in your case
specifies that all data that heads for the
192.168.10.0 network will be sent out through bge1.Correct.
If you want to use both interfaces when sending data,
you have to trunk them.IPMP is also supported.
It seems very strange that both interfaces gets
unreachable if you disconnect one cable.As you mentioned. The interface itself isn't really unreachable. But the reply to any traffic tries to use the other interface so it isn't useable.
Darren

I just got my macbook pro 11 have problems with setting up audio interfaces!! plz help me

So here it goes! i properly installed the drivers for my Emu tracker pre usb and for my saffire pro 40 (firewire) . Both audio interfaces show up in the system profiler under their respective category (firewire and usb bus) But i cant get them to apear in system preferences sound menu neither on logic!! my saffire pro doesnt even lock with the mix control software provided! what can be the problem ? how can i solve it ? I really need your help!!
(everything works perfect on my i mac 27" 10.6.2 snow leopard).

I doubt you will have any virus, must never say never
Free for Home use
Sophos
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition.aspx
also free from app store Clam XAV
http://www.usatoday.com/story/tech/columnist/komando/2013/02/14/tech-myths-mac-s oftware-megapixels-camera/1910521/
Your Battery will not last long if you keep it on full brightness.
see this read
https://discussions.apple.com/thread/964075?start=0&tstart=0
http://support.apple.com/kb/PH3738
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Battery%2095%25
Open LaunchPad/Other/Activity Monitor/CPU
and check if any of your processes are high% CPU if so select it and press the Red Quit process Button
Mac101 may assist you
http://www.apple.com/support/macbasics/

How to permanently set wicd wired interface? eth0 changes to vboxnet0

I use wicd in Gnome. Works well, only problem is that everytime I use the laptop on-the-go (which is daily) without a wired LAN connection via eth0, wicd changes my default wired connection to vboxnet0 (obviously, I have virtualbox installed). Is there some way of permanently setting my wired connection to be eth0? It gets iritating to keep having to manually change it back when I get back to my office.
For the record, the output of cat /etc/wicd/manager-settings.conf shows
wired_interface = eth0
Can't think of any other configuration files I may edit, except for /usr/lib/*.py, which I don't have the command of python to grasp.
Assistance appreciated. And yes, i do know about netcfg, but don't really want to be hand-editing stuff for networking.

Problem solved? If not, http://wiki.archlinux.org/index.php/Ude … _Each_Boot

Setting up my Interface in Logic Express (HELP!)

Hi Everyone,
I was wondering if someone could maybe help me out a little?
ive got a Macbook pro and recently brought Logic 9 express for it, i also have a Lexicon Alpha interface (http://www.musiciansbuy.com/mmMBCOM/Images/lexiconalphadw.jpg) i have a M Audio Axion 25 Midi controller which i understand has a built in interface so this shouldnt need to run off an external interface.. anyway...
heres my problem, ive only just got Logic 9 and so i havent got much idea on alot of it yet, but last night i plugged in my interface via USB to my Mac, loaded up Logic. Plugged in my guitar input to the interface, created a new project and i have no idea where im going from there? Logic does recognise i have a interface but i cant get any sound, please someone tell me where im going wrong and what i need to do to.
Help will be much appreciated
Thanks alot
Lee

There are no silly questions in the Logic Express forum (don't you try this in the Logic pro forum )
LOL
However, you'll need a real audio track, no MIDI track. Use the "instrument" or "audio" track, because the "software instrument" and the "external MIDI" tracks are MIDI only, which means they only handle MIDI data (and in the case of the "software instrument" track, it converts this MIDI data by using a instrument plugin into hearable audio).
Ah, and for a Logic beginner: http://www.tweakheadz.com/guide.htm
Fox

Yahoo mail not respecting Reply-to address set in web interface..

Has anyone else noticed this problem and figured out a workaround?
G4 Powermac 1 gig Mac OS X (10.4.10)

Well, the push feature is less important to me than
a
reliable IMAP server.
Can you share which commercial services provide
that?
I suppose I could have my company put a server
outside our firewall, but that seems like an
expensive solution .
More to the point, this seems like a simple
problem
that Apple and Yahoo could and should solve without
a
lot of sweat.
I agree. It would be even sweeter if GMail decide to
offer IMAP support. Their spam filters are TOP
NOTCH.
My host company (Valueweb) hosts my domain and their
servers provide IMAP support. If you only need
email, I've heard good things about
http://www.fastmail.fm/
Well, I just want my company to ship all my mail to [email protected] and come out on my iPhone. That works fine.
Then, I want the replies from the iPhone to appear to come from [email protected] That doesn't seem to be too difficult a problem and I'm disappointed that Apple and Yahoo didn't work this out.
As previously mentioned, one can get this to work with Gmail, but POP only, which means that the iPhone downloads every email instead of just headers. Not good.
Thanks for the pointer to fastmail -- I'll look into them.

Setting Up An Interface

Similar Messages

Maybe you are looking for