Setting up and rendering 1280x756 composition

Hi, I need an advise on setting up and rendering 1280x756 composition. My editor requested that I render my animation with the following settings:
1280 756 p field1 render animation codec 29.97frame rate.
My comp is setup as 1920x1080. I don't see a 1280x756 option in AE CS3 Composition Settings.

??? That resolution is no valid HD video resolution, so I don't know what the editor would even do with it. It would be squeezed or cropped when importing it in a standard editing program. Apart from that, feel free to set your composition size to whatever you need. AE doesn't mind and does "resolution-independent compositing".
Mylenium

Similar Messages

What sequence setting would you use to edit 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in FCP. Experiencing Quality and rendering issues.

What sequence setting would you use to edit both 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in a single timeline in FCP. I'm experiencing quality and rendering issues. I've tried numerous settings but can't seem to figure this one out. Thanks for your assistance.

Although you can combine the avchd 1920x1080 material with prores 1920x1080 in the same timeline, you might land up saving time just converting everything to 1920x1080 prores 422. You'd probably reduce the amount of rendering while you're working and exporting when you're done by a great deal. This workflow will require much more drive space.

The composite state is set to "off". The composite can be turned "on"

Hello,
I had deployed a composite in weblogic 10.3 from Jdeveloper 11.1.1.6.I am grtting this error.
Can you help me to sort this out and this is in Active state only.
oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : Message Router for default/EBIZ_Sync_SummaryOrders!2.0*soa_a882c40a-6e1e-440c-88c2-eea3ee854c13 is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.

I think I have already provided you a reference on this error earlier -
SOA-20001: Message Router for {0} is not able to process messages.
Login to SOA EM console and "Start up" and "Activate" your composite (default/EBIZ_Sync_SummaryOrders!2.0). You may refer section "7.4.2 Managing the State of an Application from the SOA Composite Application Home Page" at -
http://docs.oracle.com/cd/E23943_01/admin.1111/e10226/soacompapp_deploy.htm#CHDDFEGH
Regards,
Anuj

How to set table cell renderer in a specific cell?

how to set table cell renderer in a specific cell?
i want set a cell to be a button in renderer!
how to do?
any link or document can read>?
thx!

Take a look at :
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html
It is very interesting, and I think your answer is here.
Denis

Setting "in" and "out" - why does it export the full timeline ?

Hi folks.
Well, I'm scratching my head.
I go into Premiere, onto the timeline, and set an "in" point and an "out" point. I then get Premiere to render the video. It renders out the whole timeline, eventhough I told it to render only the "work area" which of course one would think would be that area I told Premiere I wanted, because of my "in" and "out" points.
The manual is very vague, and I just don't get it. I don't want to do any razor cuts, I just want to get Premiere to render out the video inside my "in" and "out" points I've inserted.
Any help would be appreciated,
Dave.

The work area bar is different than setting in and out points. It's the bar with the (I think) blue handles at the top of the timeline. Drag those handles to the points where you want rendering to start and stop, and hit Enter.

Strange previews and renders appearing with blue rectangle glitch

I am getting these strange artifacts on my previews and renders in PP Cs6. The footage is proresHQ. I have attempting adjusting every setting I know and doing a clean reinstall of PP. Any ideas?

Hi NoxPhoenix,
Have you updated your GPU drivers lately? Try that.
Thanks,
Kevin

Example IFS parser and renderer

Hi
I was wondering if someone could provide me with some sample code of a very simple parser and renderer to get me going on my java for this.
In 9ifs there already is an example of a parser called SimplestParser which extracts information from between the <title>...</title> tags from a html document. The example then lets you apply this to html documents for which the extension .html is changed to .cus (for custom). The XML is given to create a custom class and associate the extension with that parser.
What is not there is a renderer that displays this information back to the user (of what is between the <title>...</title> tags). I assume a renderer would display this in the IFS web interface when you go to Edit -> Properties.
Would enyone be able to provide me with sample code for such a renderer, or alternatively a complete parser/renderer complementary set, extracting and displaying simple custom attibute(s) for a particular file type?
That would greatly help me out.
Thanks very much.
Hugo

I have another problem with custom parser. It doesn't work with versioned documents:
I have versioned file in iFS, if I parse and upload new version of that file I get Error: File already exists. I think that I should somehow set the family of doument which I want to parse & upload. But I don't know how.
null

Rendering a composition with bicubic interpolation (I NEED HELP AS SOON AS POSSIBLE!!!!!) thanks!

So I have this composition that I want to render. Some of the layers in that composition has bicubic interpolation enabled. When I rendered that composition, the layers with bicubic interpolation enabled went back to default, seen in the image file attached.
For more information, I'm importing this into a premiere which I will then render again for YouTube. Would this happen again when I render from adobe premiere?

The layers highlighted are the ones with bicubic interpolation enabled. It looks fine in the preview window and in premiere, since this whole after effects comp is a dynamicly linked comp between AE and Premiere. The problem is, when I render this comp in After Effects, those highlighted layers become blurry. Also, if you're wondering why I'm rendering this comp even though it's dynamically linked with premiere, it's because I do it to reduce time in rendering when I color correct/grade in premiere.

AfterEffects CS3 runs really slowly and renders even slower!

I've had no problem with AE until purchasing CS3. Running it on a G5, seemed to work great for a couple of projects. Now even a very simple project takes hours to work on and goes into some kind of stasis during render.
I've recreated the project in CS7 on a different system and it runs fast and renders in a few minutes, so I'm sure its not the media.
FCP and photoshop run great on the system. I am rendering to the hard drive which seems to have plenty of room.
This project has a Friday morning deadline, so I'm desperate.

I haven't any plug-ins installed. The system I'm running this on is used ONLY for photoshop, AE and FCP. All of the updates are installed religiiously. I ran utilities on my computer recently and all seems well.
I checked my ram and disk cache and it is set at 150%. When I work, the render engine reports I'm using 35% of 1.2 Gb. I had an AE person look at it and she said she can't see what might be causing the problem. With this same system, and AE 7, I created three-d boxes, played with particle world, multitudes of cameras and lights... no problem.
Now, to work at 1/4 res, I wait about 5 minutes for the video screen to refresh every time I touch a camera position keyframe, or a light. Even moving the 7 mb file sideways takes a long time.
I installed AE CS3 from an Adobe sight download, instead of purchasing the discs. I can't find the dmg install file AN"ywheRE on my system. It was an upgrade, so the original AE program is still in there.
I can't go back to the previous version because I won't be able to open the current AE files. At this point, I'm looking at missing my deadline. There must be some explanation for this!

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

How To set Header and Footer in MIDlet screen

Hi Friends,
How can i set header and footer in my screens .
My need is that in header part ,my company's name shuld be display and in footer section "any thing".
How can i achieve this things plz advice me.
karan

Hi Supareno,
Can u tell me in details with small code, If it's
possible for you .
regards
karandefine an header (coordinate 0,0)
optional {
a CustomItem? (coordinate 0, 0+header.getHeight() )
another CustomItem ? (coordinate 0, CustomItem.getY() + CustomItem.getHeight() )
etc...
define footer (coordinate 0, getHeight() - footer.getHeight() )
Message was edited by:
supareno

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

HT1386 I have a new iPhone and want to purchase a ringtone on iTunes. It keeps asking for answers to a question that I did not set up and don't have the answer for. How do I get pass this dilemma?

I have a new iphone and want to purchase ringtones from itunes. Itunes is asking answers for security questions I did not set up and I can't answer them. How do I get past this to be able to purchase. I can purchase songs on my MAC and sync but itunes doesn't give the option to purchase ringtones on the MAC, just the iphone.

If the email hasn't arrived after a few hours and isn't in a spam filter, you need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106007)

HT204407 my 2 daughters and I are sharing one icloud. I am trying to set up and use find my friends with them, but it won't let me. It says I can't send a request to myself when I send one to her email address, which is different than mine. What am I d

my two daughters and I have iphones. I am trying to set up and use find my friends with them. We have 1 icloud, but different emails. When I send a request it states that I can't send a request to myself. What am I doing wrong

Sharing an Apple ID is never recommended for these reasons.
They can create their own: http://appleid.apple.com and you can add them at the addresses they use for their ID.
Sharing an Apple ID is not recommended because all of your data gets merged and when it gets deleted from one device, it deletes from them all, such as Contacts.
iCloud Guide

SET PARAMETER AND GET PARAMETER

What is the difference between Set parameter and Get parameter?

Hi,
Set parameter is used to put some value into ABAP memory area, get paramter is used to retrive values form ABAP memory.
refer the below sample code.
here i am taking one material number and i am passing that mateial number by using 'set parameter id', the material number will be stored in ABAP-memory area 'MAT', and then i am calling the Tcode 'MM03', after executing the Tcode (from program) automatically 'MM03' will reads that material number from that ABAP-memory area and it will displays the 'MM03' tcode along with material number.
you can find the parameter-id's from data element of that field.
parameters: p_matnr like mara-matnr.
set parameter id 'MAT' field p_matnr.
call transaction 'MM03'.
Reward if useful.
Thanks,
Sreeram.

Setting up and rendering 1280x756 composition

Similar Messages

Maybe you are looking for