Setting up Apache Tomcat 4.0 for hosting a webpage

Hi, I am trying to setup an Apache Tomcat 4.0 web server for hosting on my computer through a verizon DSL connection, and a DI-604 router, and a program called no-ip (http://www.no-ip.com) that is supposed to allow you to host a web server from your home computer using dynamic ip addresses I can't seem to get it to work,
I can reach the server though http://localhost/
I can reach the server though http://127.0.0.1/
I can't reach the server though http://leeand00.servehttp.com/
which is the address IM supposed to access it though on no-ip.
When I ping leeand00.servehttp.com it returns 100% of the packets, I think it must have something to do with the ports, and I know I can't use port 80 because it's blocked by verizon.
Thanks in advance,
Maskkkk

Like what I java application?
or a servlet/JSP web application?
I'm confused....
Hi,
localhost and 127.0.0.1 are basically the same. So
So try creating an application and connecting through
http://localhost/aplication_name
If this does not work, then you need to check your
ur configuration out, and most of this is done in the
conf/server.xml file
kev

Similar Messages

Setting up Apache Tomcat - information in Wiki do not work!

Hello there,
I wanted to install Apache Tomcat on my Webserver, but was not able to follow the wiki entry in http://wiki.archlinux.org/index.php/Tomcat_and_Apache.
Installing Tomcat via pacman was not a problem. Then, the first problem came up:
Edit /etc/conf.d/tomcat. Change CATALINA_USER to some user that suites your system (like "nobody")
My default /etc/conf.d/tomcat looks like this:
# Arguments for catalina
#CATALINA_OPTS=
There is no CATALINA_USER entry. Adding one didn't help anything.
modprobe capability gives me
FATAL: Module capability not found.
and trying to start tomcat with /etc/rc.d/tomcat start tells me
:: Starting Tomcat [BUSY] 06/03/2010 14:04:13 31786 jsvc error: Cannot locate Java Home
[FAIL]
Ok. Adding JAVA_HOME to /etc/conf.d/tomcat and setting it to /opt/java (which is my Java home) did even take no effect.
What am I doing wrong, how can I get it to run?
Thanks in Advance,
beachcoder

The package 'openjdk' installs to /usr/lib/jvm/java-6-openjdk
but the package 'jdk' installs to /opt/java
This is a problem, as the wiki is written assuming jdk (rather than openjdk) really, they should install to the same place to avoid confusion (and both openjdk and jdk conflict, so you can't install them both at the same time)
If you're using openjdk, replace $JAVA_HOME in /etc/rc.d/tomcat with /usr/lib/jvm/java-6-openjdk
if you're using jdk, it should be /opt/java
hope that helps
Last edited by SyXbiT (2010-03-10 07:05:30)

Apache Tomcat and eclipse for EP

Hi,
I have got anew book on SAP Enterprise protal by SAP Press.
There is also a CD which contains Portal development kit, eclipse 2.1, apache tomcat 3.3.1 and portal development kit plug-in for eclipse.
I don't have any SAP Access as if now.
Is it possible to learn SAP EP programming based on the softwares I have got on these CD and the book.
Tushar

Tushur, yes you can use that software to learn how to code JSPDynPage applications for the portal. This is how I started learning portal technology. I have since moved on to webdynpro. You might consider, as Srinivas suggested, download the Sneak Preview of WAS 6.40 java. This will give you a complete development envirnment, the NWDS, the portal, and the WAS to run it on. Next thing you now, you'll be writing webdynpro apps like the best of em.
Regards,
Rich Heilman

Setting Classpath in TomCat 5.5 for Custom Application

I seem to have messed up my application. I cant access some of my java classes written and deployed in the WEB-INF/classes directory from a JSP Page stored in my app root.
However, the fun part of this is if I create a package in WEB-INF/classes, store my java/class files in it and access these from the JSP using import, it works pretty fine. I'm unable to debug the scenario.
I've given only the context path for the application in the server.xml. I suppose that would be sufficient for my application to be deployed, and need not specify any other classpaths anywhere.
Please help me and correct me if i'm wrong.
fun_one

As of Java 1.4, if any class is in a package, then it can no longer access or import classes from the default (non) package.
As of Tomcat 5.0, all TC classes, including the translated JSP pages, are in a package. That means that they can not access your classes that are not in a package.
Your only option is the best one you should always do anyway: put all the classes in a package.

Instructions on hosting my portlet on Portal's Apache Tomcat.

Greetings,
I wrote a portlet that I have been hosting on a copy of Apache Tomcat I installed on my local machine. Now I want the Portal's Apache Tomcat Web Server to host it.
I don't just want to muck with the portal's internal copy of the web.config file if there is a more elegant way. I presume there must be because as we installed the different services, they made portlets available.
Any help, guidance, or instructions would be greatly appreciated.

Hello,
Portal application has nothing to do with your portlet application. Your portlet application has to be hosted on remote server (as soon as there is no native portlets anymore).
It still may be the some Tomcat instance where your portal is (bad practice), but even in this case it will be different application in webapp catalog. Portal will allways communicate with your portlet over http. This is one of the most important difference of Plumtree in compare with many other portal vendors.

Setting apache as a front end host-proxy web server for weblogic 10.3.3

Hi ,
i have installed apache 2.2.21 in the red hat linux 6 environment.Now i am trying to set that apache web server as a front end host ,proxy web server for my weblogic 10.3 application server cluster. My apache is listening to the port 8080.
What changes i had to made in admin console of my server as well as in the httpd.conf file of apache.
Can any one guide me how to proceed ?
Any help is highly appreciated......

Thanks Ravi,
i have already gone through http://docs.oracle.com/cd/E12840_01/wls/docs103/plugins/apache.html.
In my case "mod_wl_22.so" was not available but i downloaded this p10051826_1033_Generic.zip file from where i got that file and make it available in the modules directory, changed the file permissions (using chmod 755 mod_wl_22.so) and also changed the httpd.conf file as below :
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicCluster wlserv1:7001,wlserv2.com:7001
MatchExpression *.jsp
</IfModule>
By using /bin/ls command i checked the following :
/bin/ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped
Using file mod_wl_22.so i checked the following:
mod_wl_22.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, not stripped
My problem is when i used ./apachectl -t i got the following error :
httpd: Syntax error on line 112 of /u40/app/apache/conf/httpd.conf:
Cannot load /u40/app/apache/modules/mod_wl_22.so into server: libstdc++.so.5:
cannot open shared object file: No such file or directory
So can u please guide me where my problem is and how to rectify it ? Its urgent. please help me.
Thanks
Jyoti Ranjan

Unable to compile class for JSP. apache-tomcat-6. What could be wrong?

Hello, I am new to JSP and I am trying a very basic jsp and class file on Windows XP. I get the Unable to compile class for JSP.
Steps that I have done:
javac ch06_01.java , placed the ch06_01.class under
C:\Apps\apache-tomcat-6.0.16\webapps\ch06\WEB-INF\classes
Then grabbed the ch06_02.jsp and placed it under
C:\Apps\apache-tomcat-6.0.16\webapps\ch06\
When I run it (by placing this into Explorer or Firefox URL
http://localhost:8080/ch06/ch06_02.jsp) I get the error further
below. Things I have done and made sure they are in place are:
set up JAVA_HOME to C:\Apps\jdk1.6.0_06
Using CATALINA_BASE: C:\Apps\apache-tomcat-6.0.16
Using CATALINA_HOME: C:\Apps\apache-tomcat-6.0.16
Using CATALINA_TMPDIR: C:\Apps\apache-tomcat-6.0.16\temp
Using JRE_HOME: C:\Apps\jre1.6.0_06
I did a google on the error and I found people saying to place the
tools.jar from the jsk into the lib directory under CATALINA_HOME. But
the examples still don't work. What step could I be missing? Your help is greatly
appreciated.
This is the simple jsp file:
<%@ page import="ch06_01" %>
<HTML>
<HEAD>
<TITLE>Using a JavaBean</TITLE>
</HEAD>
<BODY>
<H1>Using a JavaBean</H1>
<% ch06_01 messager = new ch06_01(); %>
The message is: <%= messager.msg() %>
</BODY>
</HTML>
this is the simple ch6_01 java file:
public class ch06_01
public ch06_01()
public String msg()
return "Hello from JSP!";
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented
it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 6 in the generated java file
The import ch06_01 cannot be resolved
An error occurred at line: 9 in the jsp file: /ch06_02.jsp
ch06_01 cannot be resolved to a type
6: <BODY>
7: <H1>Using a JavaBean</H1>
8:
9: <% ch06_01 messager = new ch06_01(); %>
10:
11: The message is: <%= messager.msg() %>
12:
An error occurred at line: 9 in the jsp file: /ch06_02.jsp
ch06_01 cannot be resolved to a type
6: <BODY>
7: <H1>Using a JavaBean</H1>
8:
9: <% ch06_01 messager = new ch06_01(); %>
10:
11: The message is: <%= messager.msg() %>
12:
Stacktrace:
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:92)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:423)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:316)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:294)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:281)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Edited by: indikon1 on Jun 12, 2008 1:18 PM
I just updated the directories of the variables to reflect the current status of my system.

What is wrong is that you are using an "old" jsp tutorial :-)
Since Java 1.4, JSPs have been unable to access classes in the "default" package.
What you need to do:
Put the java class ch06_01 in a package.
Steps to do this
- Edit ch06_01 and add the following to the very top of the file (without the quotes): "package mypackage;"
- create a folder "mypackage"
- move ch06_01.java into that folder
- compile that class (now in the mypackage package)
- place ch06_01.class under C:\Apps\apache-tomcat-6.0.16\webapps\ch06\WEB-INF\classes\mypackage
In your jsp:
<%@ page import="mypackage.ch06_01" %>
I would suggest using a more up-to-date tutorial that uses JSTL.
Take a look at this [Apache Tomcat tutorial|http://www.coreservlets.com/Apache-Tomcat-Tutorial/index.html]

Apache Tomcat 7.0.4 can't recognize the classpath for .jar files

Hiii Everybody,
I have a weird problem. I am trying to develop a simple application where I am trying to pass an excel file name as an argument to a method and the method creates a copy of the specified file. I have used jxl.jar for excel file manipulation. During this I have faced two problems.......
1) I tried to compile the file CopyExcel.java in the command prompt(windows), sometimes the file is not compiled and the error shown indicates that it can't recognize the package jxl. But if I close the command prompt window and open it again.... I could compile the CopyExcel.java succesfully with no error.
2) Even if I have compiled the CopyExcell.java file successfully, whenever I am tryiyng to call a method copyMain() inside it, browser shows....
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoClassDefFoundError: jxl/Workbook
     CopyExcel.copy(CopyExcel.java:39)
     CopyExcel.copyMain(CopyExcel.java:81)
     ServicePage.processRequest(ServicePage.java:28)
     ServicePage.doPost(ServicePage.java:73)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:641)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
root cause
java.lang.ClassNotFoundException: jxl.Workbook
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1672)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1517)
     java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     CopyExcel.copy(CopyExcel.java:39)
     CopyExcel.copyMain(CopyExcel.java:81)
     ServicePage.processRequest(ServicePage.java:28)
     ServicePage.doPost(ServicePage.java:73)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:641)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
note The full stack trace of the root cause is available in the Apache Tomcat/7.0.4 logs.
--------------------------------------------------------------------------------The code for CopyExcel.java is as folows.............
* To change this template, choose Tools | Templates
* and open the template in the editor.
* @author Administrator
* To change this template, choose Tools | Templates
* and open the template in the editor.
import java.io.File;
import java.io.IOException;
import jxl.Cell;
//import jxl.CellType;
import jxl.Sheet;
import jxl.Workbook;
import jxl.read.biff.BiffException;
import jxl.write.WritableWorkbook;
public class CopyExcel {
     private String inputFile;
     public void setInputFile(String inputFile) {
          this.inputFile = inputFile;
     public void copy() throws IOException {
          File inputWorkbook = new File(inputFile);
          Workbook w;
                try{
                    System.out.println("Before w= Workbook.getWorkbook(inputWorkbook); ");
          w= Workbook.getWorkbook(inputWorkbook);
                 System.out.println("After w= Workbook.getWorkbook(inputWorkbook); ");
          WritableWorkbook copy=Workbook.createWorkbook(new File("CopyPan.xls"), w);
                copy.write();
                copy.close();
                }catch(Exception e){}
/*          try {
               w = Workbook.getWorkbook(inputWorkbook);
               // Get the first sheet
               Sheet sheet = w.getSheet(0);
               // Loop over first 10 column and lines
                    for (int i = 1; i < 6; i++) {
                         Cell cell = sheet.getCell(0, i);
                         //CellType type = cell.getType();
                         //if (cell.getType() == CellType.LABEL) {
                              //System.out.println("I got a label "
                                   //     + cell.getContents());
                         //if (cell.getType() == CellType.NUMBER) {
                              //System.out.println("I got a number "
                                        //+ cell.getContents());
                                                System.out.println(cell.getContents());
          } catch (BiffException e) {
               e.printStackTrace();
     public static String copyMain(String args) throws IOException {
          String str=args;
          CopyExcel test = new CopyExcel();
          test.setInputFile(args);
          test.copy();
                return "Success";
}I have set the "CLASSPATH" environment variables in "user variables for administrator" as follows,
.;%SYSTEM%;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\bin;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\lib\servlet-api.jar;C:\Program Files\Java\jdk1.6.0_11\lib\jxl-2.6.jar Also I have tried editing the startup MS-dos batch file as folows....
set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_11
set CLASSPATH=.;%SYSTEM%;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\bin;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\lib\servlet-api.jar;C:\Program Files\Java\jdk1.6.0_11\lib\jxl-2.6.jar
@echo off
rem Licensed to the Apache Software Foundation (ASF) under one or more
rem contributor license agreements. See the NOTICE file distributed with
rem this work for additional information regarding copyright ownership.
rem The ASF licenses thi..........But the problem remained...........
Plz. help me.
Thank u in advance for any help.

Hiii Everybody,
I have a weird problem. I am trying to develop a simple application where I am trying to pass an excel file name as an argument to a method and the method creates a copy of the specified file. I have used jxl.jar for excel file manipulation. During this I have faced two problems.......
1) I tried to compile the file CopyExcel.java in the command prompt(windows), sometimes the file is not compiled and the error shown indicates that it can't recognize the package jxl. But if I close the command prompt window and open it again.... I could compile the CopyExcel.java succesfully with no error.
2) Even if I have compiled the CopyExcell.java file successfully, whenever I am tryiyng to call a method copyMain() inside it, browser shows....
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoClassDefFoundError: jxl/Workbook
     CopyExcel.copy(CopyExcel.java:39)
     CopyExcel.copyMain(CopyExcel.java:81)
     ServicePage.processRequest(ServicePage.java:28)
     ServicePage.doPost(ServicePage.java:73)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:641)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
root cause
java.lang.ClassNotFoundException: jxl.Workbook
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1672)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1517)
     java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     CopyExcel.copy(CopyExcel.java:39)
     CopyExcel.copyMain(CopyExcel.java:81)
     ServicePage.processRequest(ServicePage.java:28)
     ServicePage.doPost(ServicePage.java:73)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:641)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
note The full stack trace of the root cause is available in the Apache Tomcat/7.0.4 logs.
--------------------------------------------------------------------------------The code for CopyExcel.java is as folows.............
* To change this template, choose Tools | Templates
* and open the template in the editor.
* @author Administrator
* To change this template, choose Tools | Templates
* and open the template in the editor.
import java.io.File;
import java.io.IOException;
import jxl.Cell;
//import jxl.CellType;
import jxl.Sheet;
import jxl.Workbook;
import jxl.read.biff.BiffException;
import jxl.write.WritableWorkbook;
public class CopyExcel {
     private String inputFile;
     public void setInputFile(String inputFile) {
          this.inputFile = inputFile;
     public void copy() throws IOException {
          File inputWorkbook = new File(inputFile);
          Workbook w;
                try{
                    System.out.println("Before w= Workbook.getWorkbook(inputWorkbook); ");
          w= Workbook.getWorkbook(inputWorkbook);
                 System.out.println("After w= Workbook.getWorkbook(inputWorkbook); ");
          WritableWorkbook copy=Workbook.createWorkbook(new File("CopyPan.xls"), w);
                copy.write();
                copy.close();
                }catch(Exception e){}
/*          try {
               w = Workbook.getWorkbook(inputWorkbook);
               // Get the first sheet
               Sheet sheet = w.getSheet(0);
               // Loop over first 10 column and lines
                    for (int i = 1; i < 6; i++) {
                         Cell cell = sheet.getCell(0, i);
                         //CellType type = cell.getType();
                         //if (cell.getType() == CellType.LABEL) {
                              //System.out.println("I got a label "
                                   //     + cell.getContents());
                         //if (cell.getType() == CellType.NUMBER) {
                              //System.out.println("I got a number "
                                        //+ cell.getContents());
                                                System.out.println(cell.getContents());
          } catch (BiffException e) {
               e.printStackTrace();
     public static String copyMain(String args) throws IOException {
          String str=args;
          CopyExcel test = new CopyExcel();
          test.setInputFile(args);
          test.copy();
                return "Success";
}I have set the "CLASSPATH" environment variables in "user variables for administrator" as follows,
.;%SYSTEM%;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\bin;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\lib\servlet-api.jar;C:\Program Files\Java\jdk1.6.0_11\lib\jxl-2.6.jar Also I have tried editing the startup MS-dos batch file as folows....
set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_11
set CLASSPATH=.;%SYSTEM%;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\bin;C:\Program Files\Apache Software Foundation\apache-tomcat-7.0.4\lib\servlet-api.jar;C:\Program Files\Java\jdk1.6.0_11\lib\jxl-2.6.jar
@echo off
rem Licensed to the Apache Software Foundation (ASF) under one or more
rem contributor license agreements. See the NOTICE file distributed with
rem this work for additional information regarding copyright ownership.
rem The ASF licenses thi..........But the problem remained...........
Plz. help me.
Thank u in advance for any help.

Settings to be done for Apache/Tomcat for HTTP tunneling?

What are the settings that i need to do for Apache/Tomcat to run http tunneling over rmi.
Thanks in advance.

Hi thanks for reply.
i am trying to run the application which comes from sun doc(rmiservlethandler).
in one article i have found that we have to set up the Apache/Tomcat in order to rewrite the rmi-cgi call to the servlet.
i am not able to make run rmiservlethandler app. any tips for this app to run on Apache/Tomcat.

Setting the classpath of classes12.zip for Tomcat

Hi
I am using Apache Tomcat webserver and while trying to run a jsp page which intializes oracle.jdbc.driver.OracleDriver it throws an error
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
Please suggest how to set the classpath of classes12.zip in Apache Tomcat
My Code Snippett
<%@ page import="java.util.*,java.sql.*,javax.servlet.*"%>
<body>
     <%
     Connection con ;
     ResultSet rs ;
     Statement stmt ;
     ResultSetMetaData rsmd ;
     try{
     Class.forName("oracle.jdbc.driver.OracleDriver");
     catch(Exception e)
     out.println(e);//print the exception on the command prompt
%>

The simplest way to do this is to copy classes12.zip to the WEB-INF/lib directory. The JSP should then find this automatically.
As a side note, that is an ancient JDBC driver - you might want to upgrade to something from this millennium.

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Are Wildcards possible for host name in "no proxy for" setting?

Our LAN requires a proxy for internet access. I need to bypass proxy for certain host names, as the proxy blocks many ports.
Things work if I enter the entire host name. But there are many, so I wish to use wildcards in the host name.
That does not seem to work.

There is no solution for host names and wild cards as far as I know. That is why I showed how to do this with the IP.
Does it work if you only specify the top level domain if you want to include other domains with the same postfix?

Latest versions of Apache/Tomcat for BO65SP3

What are the latest versions of Apache/Tomcat that can be used with Business Objects 6.5 sp3 i.e. are particular Apache/Tomcat versions bundled with a Business Objects release
We have had doubts cast over the security features of the versions of Apaceh/Tomcat we use and need to know whether we can use later versions of Apache/Tomcat, whilst retaining existing version of Business Objects 6.5.3 ?

bundled with Tomcat 5.5.25
Supported with up to Tomcat 6.0.18
check this doc :http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25

Streaming CSV via Apache/ Tomcat with Mod Proxy

I have Apache hooked up to Tomcat using mod_proxy and attempts to stream a CSV file from a Struts action via tomcat fails.
Using the tomcat port localhost:8080/testappp the streaming works fine but for some reason it does not work via the apache url
Build is Red Hat Enterprise Linux AS release 4 on Apache 2.0.52-25 and Tomcat 5.5
Below are pastes of the apache conf file and tomcat server.xml
Thanks
# httpd.conf
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# Don't give away too much information about all the subcomponents
# we are running. Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/etc/httpd"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile run/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 120
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive Off
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_ldap_module modules/mod_auth_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_svn_module /usr/lib/httpd/modules/mod_dav_svn.so
LoadModule authz_svn_module /usr/lib/httpd/modules/mod_authz_svn.so
# Load config files from the config directory "/etc/httpd/conf.d".
Include conf.d/*.conf
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User apache
Group apache
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [Email]root@localhost[Email]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName ext02:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/var/www/html"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/var/www/html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
<IfModule mod_userdir.c>
# UserDir is disabled by default since it can confirm the presence
# of a username on the system (depending on home directory
# permissions).
UserDir disable
# To enable requests to /~user/ to serve the user's public_html
# directory, remove the "UserDir disable" line above, and uncomment
# the following line instead:
#UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.php index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig /etc/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
CustomLog logs/access_log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/var/www/icons/"
Alias /admin "/home/boss4/web/geoland/admin/"
Alias /bboard "/home/boss4/web/phpBB3/"
<Directory "/var/www/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/home/boss4/web/geoland/admin">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/home/boss4/web/phpBB3">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# WebDAV module configuration section.
<IfModule mod_dav_fs.c>
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort NameWidth=*
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
AddDefaultCharset UTF-8
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
# See http://www.iana.org/assignments/character-sets
# for a list of sorts. But browsers support few.
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"

Please note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right??

Problem connecting oracle database to jsp pages using Apache Tomcat server 8.0

Well...I tried too many things..googled so many times..but still could not find solution to my problem.
I use windows 8 Enterprise Edition(if this has to do something with the problem)
Oracle 11.2.0
Apache Tomcat server 8.0
JDK 1.7
My oracle is installed in the D: drive and tomcat in c:. i copied the ojdbc6.jar file from oracle to lib directory of tomcat server.
Then i set CLASSPATH in environment variables as "C:\Program Files\Apache Software Foundation\Tomcat 8.0\lib\ojdbc6.jar" in system variables
My path variable is set as "C:\Program Files\Java\jdk1.7.0_02\bin".
My program is as follows in notepad:
<%@ page import="java.sql.*" %>
<html>
<body>
<%
Connection conn;
Statement st;
ResultSet rs;
try{
new oracle.jdbc.driver.OracleDriver();
String dbURL="jdbc:odbc:oracle:thin:@localhost:1521:XE";
String userId="system";
String pwd="moon";
conn=DriverManager.getConnection(dbURL,userId,pwd);
st=conn.createStatement();
rs= st.executeQuery("SELECT * FROM login");
while(rs.next())
System.out.println(rs.getString(1)+""+rs.getString(2));
catch(Exception e){}
%>
</body>
</html>
I get too many errors then
eroors
org.apache.jasper.JasperException: An exception occurred processing JSP page /page2.jsp at line 14
11: String userId="system";
12: String pwd="moon";
13:
14: conn=DriverManager.getConnection(dbURL,userId,pwd);
15: st=conn.createStatement();
16:
17: rs= st.executeQuery("SELECT * FROM login");
Stacktrace:
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:568)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:455)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:403)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:347)
javax.servlet.http.HttpServlet.service(HttpServlet.java:725)
org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)
root cause
javax.servlet.ServletException: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:905)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:834)
     org.apache.jsp.page2_jsp._jspService(page2_jsp.java:102)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:725)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:403)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:347)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:725)
     org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)
Nothing solved this problem.

>> Nothing solved this problem.
Can't fix a problem 'till an actual problem is identified.
>> ODBC Driver Manager ... Data source name not found
That appears to be ODBC drivers looking for a DSN (Data Set Name). If it wants a DSN, the DSN has to be specified in the code, and the DSN has to be configured in the windows host ODBC applet. So that is at least two squirrels to get in the right tree before moving forward. A ...host:...[port:]SID|service name are some of the bits needed in a jdbc connect string, and that is in no way related to DSNs. A Whole Different Animal. If it wants a DSN that might be what needs to go in the URL bit.
And ODBC setups can be confusing, especially if an x64 OS is in the mix- if that is the case there are two different ODBC configuration applets, one for x64 the other for x86, and if one gets as far as talking to an actual database it might toss an architecture error. Only way to fix that "problem" is *delete* the ODBC DSN and then run the correct (maybe the x86) ODBC config utility, and set up the DSN. Again.

Setting up Apache Tomcat 4.0 for hosting a webpage

Similar Messages

Maybe you are looking for