Setting up Begali Language in Firefox.

I was comfortable with my font settings and was enjoying Bengali Language side by side English. I forgot what was the actual settings. After an upgrade my settings have been changed. I want to know about the latest setting to accommodate both Bengali and English Language.

Can you set up another language pack from here?
* https://addons.mozilla.org/en-us/firefox/language-tools/

Similar Messages

How to get current language bar setting for input language

I am using Flex Builder 3, IE 7 and windows OS. Is there a
way to determine the current input language as set in the "language
bar"? The Capabilities class always returns "en" even after I set
Chinese ("ch") as my input language.

Hi Dragon Cao,
No need to create any customer exit variable for this ..
You have standard variable CMONTH this displays current month summation. Just restrict your Key figure with this variable.
And in properities of Key figure goto Calculations> Local Calculations> select Summation.
If you want to assign some calday at run time sure you need to create customer exit variable using Step_2 value in enhancements(CMOD).
Regards,
Rajeswari.
Edited by: mrajeswari on Aug 24, 2011 12:35 PM

Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!

No
It says ' Your ipj
your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes to activate it, or try again over the cellular connection in a couple of minutes. You can also try to activate using a Wi-Fi connection.'
HELP:(

How to download and Install bos.loc.utf.EN_US Package for the Oracle BI locale setting english-usa language in Windows 7 64bit

OBIEE 11G Installation error during configuration steps with message "Distributing Repository" failed.
I searched lot of forums but all they say, install bos.loc.utf.EN_US Package for the Oracle BI locale setting english-usa language. From where we can download this package.
Thanks in advance.

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

Setting the reading language in PDF programmatically

Hi, I have searched the forums and didn't find a reliable post on how to set the reading language for accessibility in a PDF document programmatically. Maybe using a pdfmark or specifying XMP metadata or postscript code, javascript or any other way. Any ideas will be appreciated.

Thanks, this looks very promising. I am using FrameMaker and the FDK. Is
there a way to specify the
Lang key using pdfmark or XMP? I could also embed postscript code if I
knew what the correct code would
be. I don't know much about PDF/PS and any help will be appreciated.

How I can set my default browser mozilla firefox from the command line in Windows 7?

I need to set my default browser mozilla firefox from the command line, ie without using the GUI.

'''-setDefaultBrowser''' is the correct command - you need the two capital letters.
Why Firefox 17.0.1? You would be missing a number of important security updates. Firefox 17.0.'''9''' is the current ESR release version.

Firefox won't delete cookies even after set to clear cookies on firefox exit

I have use custom settings for remembering history in firefox.
I set to clear history on firefox close. Under this settings, I set to clear cookies, active login and cache. But whenever firefox exits it doesn't remove cookies.
Also, I set to keep cookies till firefox closes. Still the cookies appears.
This is a big security issue for me..When I click restore previous session, firefox restores the login into sites also which I don't want

Got It!!!
Go To: Firefox/Tools/Options/Privacy/Tracking Checked box/Tell websites I do not want to be tracked/ History Firefox will: Never Remember History/ You may also want to: clear all current history/ Clear now/ click OK, ---> got it, that is your answer.<-- (Right click the left image below to open in a new tab)
And it is my answer as well, as I was confounded with this problem for some time. Now after you do this close your Firefox browser, and open back up Firefox browser, and there will be maybe only one or two cookies, depending on your browsers' home page.
I tried other methods to get rid of persistent cookies that would not delete by, CookieKiller, and TACO Targeted Advertising Cookie Opt-Out, those did not help, and I tried the methods listed on these links but they did not work:http://webdevwonders.com/clear-dom-storage/
Also this method did not work:http://justplainobvious.blogspot.com/2009/03/firefox-wont-delete-cookies.html
Next to make your Firefox browsing possible, go to/Firefox/Tools/Options/Privacy/,Tracking Checked box/Tell websites I do not want to be tracked, History Firefox will: Use custom settings for history, unchecked box Always use private browsing mode, unchecked box Remember my browsing history, unchecked box Remember download history, unchecked box Remember search and form history, checked box Accept cookies from sites, checked box Accept third party cookies, Keep until: I close Firefox, checked box clear history when Firefox closes, /settings all nine boxes checked/ click --->OK! (Right click the right image below to open in a new tab)
All Cookies are gone/history/deleted.

How to set the default language in preferences- dictionary- language

Hi guys,
i like to set the default dictionary language as well as the lookup path of the dictionary via script. I've found the property dictionary path as well as some settings for qoutation under languages with vendors:
app.languagesWithVendors[INDEX OF LANGUAGE].name
app.languagesWithVendors[INDEX OF LANGUAGE].dictionaryPaths
Thats fine, but how can it set a certain language with vendor as the default language for the application itself? Under the Preferences->Dictionary dialog, I can find a dropdown showing the default language. But how can I access this default or set it?
The application object has a property object called dictionaryPreferences, but this object only contains some flags like the merge behaviour but not the default language itself. So where is it?
app.dictionaryPreferences.mergeUserDictionary
Menue
Dialog
API

Ok guys,
in the meantime I think I got it. I can setup several dictionaries for several languages. Depending on the language I use in my paragraph styles the according dictionary will be used. Fine for the desktop.
But what about the InDesign Server! I use the server via scripting and SOAP ports, webservice calls. I've launched several webservice ports, like 10001,10002,10003,10004. In this case, I can set up a vendor dictionary by providing a path via script send to one port 10001 for example. But here are two problems:
1. The other InDesign Server instances aka webservice ports and engines won't get informed about the change. I have to run the script on all instances.
2. The change only lives as long as the instance is running but doesn't get saved. After restart the instance, the setup got lost.
So can I save the dictionary-setup with an pref-xml file, all InDesign Server instances would use and read per default?

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

4 possible causes of that message:
1] Activation server is actually down. Very rare occurrence, but it does happen.
When it does occur, down time is very short. Solution - try again.
2] Your firewall or antivirus are blocking the connection. Solution - temporarily
deactivate your firewall or antivirus until the update completes.
3] Computer being used for the activation has previously been used to jailbreak
an iOS device. Solution - use a computer that has not been used to jailbreak an
iOs device.
4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
may have made changes that will prevent the iPhone from successfully activating.
Terms of Use for this forum prohibit discussion of jailbroken iPhones.

How I can set the spelling language in Pages for iPad?

how I can set the spelling language in Pages for iPad? may for german...

how I can set the spelling check to other language in Papers/iPad?
The only choices you have in the iPad itself are to change the keyboard or change the user interface language. If that doesn't do what you want, probably best ask the people who make Papers.

Editing prtDefault.properties to set mandatory system language

I have seen a few threads suggesting that if you want to force a language for the portal to do it by editing the "prtDefault.properties " for the following two values:
request.mandatorylanguage=en
request.mandatorycountry=gb
However, I was curious if there is any other way to do this than editing a operating system level file. The "request.defaultlanguage" version of these parameters is editable in the System Administration -> System Config -> Service Config->Portal Runtime
Any chance there is a cleaner way to edit achieve this goal?

Hi,
prtDefault.properties can only be modified at operating system level. Save a copy of the old one, modify, save again and restart the portal afterwards.
The one at System Administration -> System Config -> Service Config->Portal Runtime is not prtDefault.properties. There you can only set the default language, not the mandatory one.
Anja

Set the default language and other preferences

This question was posted in response to the following article: http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f7772672b3318712c5ece24f8-8000.h tml

It is in the help, the issue is with finding it!
Click Help > Contents & Index.
When the help opens enter Default Language. The important bit is to tick This Reference Only so that you stay in the help. That tells you how to set the default language but not how to get to the screen where you do that. To get to that you need to go up a level, use the breadcrumbs.
I realise it's too late for what you wanted but it may help knowing how to get another answer in the future.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Setting Default Keyboard Language

I just acquired an PowerBook G4 and the thing is set to always turn on with the keyboard set to French language.
Once running I know how to switch between English and French settings (and we do use the French at times).
I would like to have the English keyboard as my default at startup.
Any thoughts?
Thanks

Hi everybody,
Can somebody please enlight me where I can make
system wide changes to the default keyboard layout?OK, I have found out that I am supposed to reboot, cancel the boot process and enter what seems to be one or another system configuration utility. There I can change the layout to German and save the configuration with a name, for example "german'. Now what?! I can only enter the configuration details again with F2 or run the scan, there's no way to exit the the routine and use the fresh installation. When I reboot by doing ctrl+alt+del everything I saved is lost the next time I enter the utility.
I am pretty disappointed by the way things are handled in Solaris. Online documentation is pretty poor too. Compared to other common Unix platforms such as *BSD or common Linux distributions everything takes hours instead of minutes, all the defaults are set to the worst possible options, nothing can be found where it is expected to be found.
It would be pretty cool if there was a sample document that descibes these common troubles for people like me with a *BSD and GNU/Linux background.
Questions like;
How do I change the default keyboard layout?
Where can I change the default shell to BASH?
How do I change the PATH environment variable for all users?
and such should be answered.
So far I am miles away from a productive system and I'm already regretting Solaris before I have even used it because I wasted days just to install the bare essentials.
thanks,
Tobias

Setting up Begali Language in Firefox.

Similar Messages

Maybe you are looking for