Setting up Custom Development Management Cockpit (CDMC)

Hi Gurus,
Custom Development Management Cockpit (CDMC) available from Solution Manager 7.0 EHP1 SP19 as part of SAP Enterprise Support tools to allow to manage customer changes to support EhP/SPS/ Upgrade projects by determining what custom changes will be impacted by SAP changes.
Question is How to setup Custom Development Management Cockpit (CDMC)? Please help me if anybody already implemented this and any docs will be helpful.
Appreciate your help.
Sincerely yours
Saru

Hi
Follow the links,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d3/4b21cf15464589b84bc63f0da54530/frameset.htm
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000308632009E
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002008602008E
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002008602008E
Hope it solves ur prb
Regards
Prakhar

Similar Messages

Problem utilizing Custom Development Management Cockpit

Hi all,
i'm currently trying to use the Custom Development Management Cockpit. When i open a Clearing Analysis project from TA CNV_CDMC it tells me that i have activated the statistics collection for one system. When i try to select this system (via "Define Project Landscape") as the statistics systems, it tells me that the statistics collection is not active on this system. Therefore, i'm stuck here...
Any hints would be appreciated.
Greetings
/Marc

Apply the composite/collective sap notes for CDMC 1348772 and 1456166. There is a fix in one of these collective notes for the problem.
Regards
Neil

Layout Set for custom Iview

Hi Experts,
I have created jspdynpage application for getting documents fron Km Folder. i have done this, but i want to set "Context Menu" for link (documents) in that iview. How can i do this.. I have added property called Layout Set for my iview and assign layout Set , but no effect. How to assign layout set for custom developed iview???
Thanks Advance....
Regards,
Kumar.

Hi praveen,
is possible to show context menu for portal development iview (custom iView)?.
I cant use KM Navigation iView, because I am listing members, each member should be a link.. this link is not possible in KM navigation..
Albert
Amjeth
Bala
Praveen
Senthil
I will show like above, here if i click the albert it will get the Albert details. and other members can rate the albert (so we need context menu)..
how can i achieve this?.
Regards,
Kumar

Problem with custom development for documents in Record Management

In Record Management i have setup a record model. It contains Bor objects, documents, cases and so on.
Each kind of record managent object has it own requirements.
For the documents there is a requirement which demands that if the scandate is changed also the date till which the document must be helded in the system must be changed.
This cannot be done automatically via default SAP and i don't want to let the customers do it there selfs, to much risk they make errors, so this must be done via custom development.
The logic searches in a enhanced method for the right attributes from the importing list of available attributes of the particular document.
This is going well in the development system but when i transport it to the test system it fails. I have noticed that the content of a custom developed field ( for example ZSCANDATE) is loaded well but a default field like SRM_DOM_STORAGE_START not. The systems returns an error that the description of the attribute is missing. When i look in the DMWB ( DocuMent WorkBench ) i dont see errors, but afcorse there is one.
What can i have forgotten in my record management installation?
Offcorse the test system is a copy of a working development system, but you have also some things that are system dependent. and i think i have forgotten some of those..
If you have a idea let me know!
kind regards,
Anton Pierhagen.

Hi BalusC,
thanks for the quick answer. I tried it as you said and now I get a validation error in my h:messages tag on my jsf page after submitting the form. There are no errors in my JBoss console, just this one word on my jsf page. Do you have any idea what this could mean?
My two lists look like this:
private ArrayList<GroupBean> selectedItems = new ArrayList<GroupBean>();
private ArrayList<SelectItem> allGroups = new ArrayList<SelectItem>();The allGroups list gets filled like this:
for (GroupBean group: groups){
allGroups.add(new SelectItem(group, group.getName()));
}where groups is a simple collection of GroupBeans which I read from the database. This seems to be correct; at least my list of checkboxes shows the correct group names.
Now here is my selectManyCheckbox:
<t:selectManyCheckbox id="sensor_access" value="#{sensorBacker.selectedItems}" layout="pageDirection" layoutWidth="3">
<f:selectItems value="#{sensorBacker.allGroups}"/>
</t:selectManyCheckbox>Any idea what goes wrong here?
Thanks for your help!
Wiebke

Facing Problem in creating the custom development over Floor Plan Manager

Hi All,
I have made one custom development over floor plan manager, but while deploying the application i am facing the following error.Please help in this regards,
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
     at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

Setting a Custom Scope in a Page

Greetings again
i am trying to set a custom scope for my pages, i am following the example 6.3.2 Setting Scope in a Page - Create New Task Flow in the Oracle® Fusion Middleware
Developer's Guide for Oracle WebCenter 11g Release 1 (11.1.1) E10148-06.
i have a managed bean whose class name is AdministratorPagView and has a method called getScopeName() that returns a String. My adfc-config.xml archive looks like this
adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<managed-bean id="__3">
<managed-bean-name id="__1">adminPagView</managed-bean-name>
<managed-bean-class id="__2">view.AdministratorPagView</managed-bean-class>
<managed-bean-scope id="__4">request</managed-bean-scope>
</managed-bean>
</adfc-config>
then in my page definition archive called AdministratorPagPageDef.xml that corresponds to the JSPX where the create page task flow, there is a parameter for that task flow like this:
<parameters>
<parameter id="oracle_webcenter_page_createpage_scopename"
value="${adminPagView.scopeName}"/>
</parameters>
so i try creating a page and when i finish creating it the getPateTreeITerator does not show me anything and looking into the WL Server floders for the mds, i just found a scope.xml file in a path structure like this one
DefaultDomain/webcenter/mds-integServerRepos/<my_app_name>/oracle/webcenter/framework/scope/scopedMD/<custom_scope_name>/scope.xml, but the new folder that reference to a new scope is not being created
is there something i am missing?
Edited by: Luis_muxhaxho_betancourth on 24/06/2010 08:46
Edited by: Luis_muxhaxho_betancourth on 24-jun-2010 18:54

the pages are being placed in a diferent folder from the one used when defaultScope is set, how can i make those pages visible in the page tree for my user ?

Upgrading PeopleSoft and Risks with Custom Development

My company's parent is on PS 8.8, and is trying to bring my company into their system. To do this, they are going to have to do a lot of custom development surrounding labor-based project costing.
From some of the PeopleSoft developers, I am hearing that it is risky to develop on this older platform, and then upgrade to version 9.1, because some of the customization will not carry over well and will need to be re-written. Their boss insists that this is an exaggeration, and it should not be a concern.
Can someone please tell me what the pitfalls are of doing heavy custom development on an older version with plans to upgrade in the immediate future?
Thank you so much.

Hi Alexandra,
I'll give you the details of attaching an application log to BPEM which are (Let say) gnerated by a Transaction.
Step 1: Define Business Process Area
Step 2: Define Business process code
step 3: Define Transaction attached to this Business Process Code
Step 4: Run transaction EMMA to view it.
I can write all the customizing for this here also however i would recommond a link which contains the cookbook of implementing BPEM.
Go to :
SAP service market place->sap for utilities->product information->Business Process Exception Management->cookbook & Guidelines->BPEM Cookook
<https://websmp101.sap-ag.de/solutions>
In this document go to the Section 4 (Customizing) here you can see all the steps in detail with example to set up the system for attaching an Application log with BPEM.
In case if you face some problem, revert.
Please assign the point.
Amit

ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"

Hello,
I'm doing some tests with ChaRM, Normal Change scenario.
As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
1) Developers perform the correction in DEV and release their TASKS of the transport request
2) Developer Lead set the Normal Change document status to "to be tested"
3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
4) Change Manager set the Maintenance Cycle status to "Test"
5) Tester performs the test into QAS
6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
According to the following SAP Portal article, it seems to be correct:
http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
Warning Message Details Status was reset by system
Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
Warning Message Next status cannot be set because some actions cannot be executed.
Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
Question: Is this the correct behavior or am I missing customizing?
Thanks in advance for your help.
Daniel

Hello Vivek,
Thanks for your reply.
It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
But OK, that's how it is.
Regards,
Daniel

Management Cockpit: Variables and Exits

Hello,
Quick question for all of you. Problem is that we are using the cockpit to view hierarchy information as per our BW query which has it defined to always bring back two levels of data. CPM simply ignores the lower level and only displays information for the node chosen within the cockpit.
Has anyone ever developed a management cockpit where the user is allowed to use a run-time dropdown variable within the cockpit to select a node in the Org hierarchy..while having the system return only the sub nodes (next level below) in the result area? Or maybe the node chosen and the subnodes?
User Scenario:
The user would like to first run the cockpit (initial prompt) for one organization node and see (for that node) how actuals are tracking to budget for a number of KPIs. Next, they would like to....
While remaining inside the cockpit, the user would like to change the view (by using the Org drop down) to only show the sub-nodes of the node that they pick. This will allow them to compare across the sub-nodes? We are trying to use a BW customer exit variable to trick the query into only returning the sub-nodes. We haven't had much success and we are looking for any suggestions.
Let me know what you think and it will be much appreciated!

Hi,
Variable types:
http://help.sap.com/saphelp_nw04/helpdata/en/c1/759b3c4d4d8d15e10000000a114084/frameset.htm
Customer Exits :
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
regards
Happy Tony

Oracle Applications Vs Custom developed software using JDeveloper

Hi,
I was wondering if you could point me to list of what would be the major advantages / disadvantages of using Oracle applications Vs building custom software using JDeveloper. This is to participate in a decision making meeting with the stake holders. Please provide any information that might be useful for decision making.
Thanks
Message was edited by:
user6773
Message was edited by:
user6773

Oracle applications are a set of pre-built applications that you can use for different tasks like Human Resource, Purchase Order, Customer Relationship Management.
The good thing is that the application is already built so you just buy it off the shelf.
JDeveloper lets you develop applications from scratch or customize existing applications.
So your basic question is "Buy vs. Build" - and this depends on whether you have the time and staff to build an HR application from scratch for example or would you rather spend your money on buying a packaged solution.

Session broker and custom conversion manager

I'm having some problem using session broker and a custom conversion manager. I just moved from using single session to using a session broker in the sessions.xml. I'm using a custom conversion manager as shown in this tech. tips URL
http://www.oracle.com/technology/products/ias/toplink/technical/tips/customconversion/index.html
Here's my conversion manager set up code -
public class JpmiConversionManagerSetup extends SessionEventAdapter
* During the pre-login event the new MyConversionManager must be installed
* @see oracle.toplink.sessions.SessionEventAdapter#preLogin
* @param event
public void preLogin(SessionEvent event) {
ConversionManager cm= new JpmiConversionManager();
ConversionManager.setDefaultManager(cm);
event.getSession().getLogin().getPlatform().setConversionManager(cm);
My session broker manages 2 sessions. In sessions.xml for one session I have the <event-listener-class> entry where I need some conversion, another session I don't have any such entry as I don't need any conversion.
Now when I try to run a named query using session broker the conversion part blows up, throws a ConversionException. Any idea? Do I need to configure the session broker instead of session in the preLogin or anything like that?

I think sessions editor is not available in 10.1.3dp4 yet. So I have to write the sessions.xml by hand. But the parser throwing me an error saying that <session-broker> is not allowed in sessions.xml.
SessionLoaderExceptions:
org.xml.sax.SAXParseException: <Line 41, Column 18>: XML-24534: (Error) Element 'session-broker' not expected.
     at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:415)
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:284)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:302)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:199)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:111)
     at oracle.toplink.platform.xml.xdk.XDKParser.parse(XDKParser.java:160)
     at oracle.toplink.platform.xml.xdk.XDKParser.parse(XDKParser.java:190)
     at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.loadDocument(XMLSessionConfigLoader.java:191)
     at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.loadDocument(XMLSessionConfigLoader.java:151)
     at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.load(XMLSessionConfigLoader.java:88)
     at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:364)
     at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:331)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
Any idea how to or where to write sessions broker in sessions.xml for 10.1.3dp4???

The custom development is not visible .

Hi Gurus,
I am trying to do the custom developments in SAP CRM 7 .
Eg : Creating a new component with a table view .
When I am trying to execute the custom development , Internet explorer opens but I cant see any thing .
Not even frame .
NOTE : Its not throwing any error .
Eg 2 : Adding a new view in the overview page of an existing component .
I cant see the assignment block in the view set configuration .
Is there any configuration need to be done for making the custom developments available ?
NOTE : This is a new system .
Thanks in advance .
Naval
Edited by: naval bhatt on Jul 22, 2011 11:37 AM

Hi Naval,
Please check whether you added your view under the main window in Runtime Repository.
Regards,
Lakshmi.Y

Creation of New Custom Development Object in Solar02

Hi,
We are trying to create an object type of Form for a new custom development object in solar02 under tab Development,and for this I get an error that the object doesn’t exist in development environment.
Based on my analysis, it looks like Solution Manager only allows to link pre-existing development objects but not creating new objects. Is that right? If not please advice how can we add new custom objects through solution manager.
Thanks & Regards,
Sandeep Alapati

hi,
solar01/02 is the tools for documenation, it is not for creating objects.
basically it should allow you to enter any developement objects names, irerespective of whether they are created in the back end system or not.
please provide the screenshots.
Thanks
Jansi

How to deploy custom development with JDI

We use JDI to deploy webdynpro for ESS application. for that we create a track, check in ESS components in the track and set up run time systems. now we are going to do custom development, for example: create interactive forms, etc.. we would like to use the same procedure to deploy modifications, but we could not found any software components to check in for the track. we are wondering, what should we do for our customer development? how do we create track without any software components?
Thanks
Jane Zhou

Hi
U can create the prduct and component by logging to SLD
http://hostname:port/sld
and then clicking on software catlog...
regards
Krishna

How to deploy custom development

We use JDI to deploy webdynpro for ESS application. for that we create a track, check in ESS components in the track and set up run time systems. now we are going to do custom development, for example: create interactive forms, etc.. we would like to use the same procedure to deploy modifications, but we could not found any software components to check in for the track. we are wondering, what should we do for our customer development? how do we create track without any software components? If we don't use JDI, how do you get the modifications in to development environment after they are tested in NWDI? Do you allow developers to connect to sdm for development system driectly?
Thanks
Jane Zhou

Hi,
For that we should be creating a software component in SLD.
Define the required DC's for that.
After doing this we need to create track for this software component.
From then the way to develop will be same as modifying any ESS application the only change will be instead of saying create project in inactive DC's we say create application for the new Software component.
Regards,
Nagaraju Donikena.

Setting up Custom Development Management Cockpit (CDMC)

Similar Messages

Maybe you are looking for