Setting up Default web template for BeX 7.0 queries.

Hi Experts,
I am running a web-report based on a query created using Query Designer 7.0. I have a default web-template that I have been using for BeX 3.x queries [which has been created using WAD 3.X] and I tried to set the same template as default for the BeX 7.0 in SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BeX Web>Set Standard Web Templates>Ad Hoc Analysis.
But I can't see the changes being reflected in the web report after I made the change.I still see that the default template 0ANALYSIS_PATTERN is being used. Can we set a web template created using WAD 3.x as the default template for 7.0 Queries?If yes, do I need to do something else apart from the changes I did in SPRO?
Thanks
Arvind
Edited by: Arvind Pattabiraman on Apr 29, 2009 8:51 PM

Arvind,
Have you migrated your template to 7.0 ? you cannot use a 3.x template as the default for  a 7.0 template... unless you are using the EP6.0 iView / ABAP stack for running your queries on the web...
Edited by: Arun Varadarajan on Apr 30, 2009 12:29 AM

Similar Messages

  • How to set default Web Template for BEx Query iViews in Portal?

    Hi,
    1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
    2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
    I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
    I only want the query name in the iView
    Can I set this somewhere in Portal?  I tried changing the standard "BEx Web Analyzer" iView as mentioned in
    http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
    but it still seems to take the template from SPRO even after restarting J2EE

    Hi,
    I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
    In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
    Cheers,
    Dion

  • How to set default Web Template for BEx Query iViews in BI Portal?

    Hi,
    1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
    2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
    I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
    I only want the query name in the iView
    Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
    http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
    but it still seems to take the template from SPRO even after restarting J2EE
    (I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

    D Nore did you found the way to do it ?
    I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
    I tried :
    pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
    (this one was working before upgrade to netweaver stack 17).
    as well as
    pcd:portal_content/templates/iviews/sap_bw_report_iview
    and
    pcd:portal_content/templates/iviews/sap_bi7x_report_iview
    none works !
    If you have the tricks share it with us.

  • How to set the default web site for WGM users

    Hi,
    In Tiger server there was a place to input the URL of the default web page for all browsers when users logged into network home folders. This was really helpful and saved a bunch of bandwidth and class time. Is there any way to do this in Leopard server? If so, please point me in the right direction.
    Thanks,
    ..Tom

    Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
    ...Tom

  • Question regarding the default web template for queries

    Hello,
    I am trying to learn the default web template that is using for queries:
    0QUERY_TEMPLATE_BROADCASTING70
    I see that it's <bi:QUERY value="" /> is empty which is logic since the query will be inserted on runtime. My question is, where in the web template does it say that? I can't see any parameter it expects to get with the query's technical name not at the webtemplate code nor at the URL...
    Roy

    Roy,
    I think you are mixing things. The template you are mentioning is used for queries that are executed from the query designer. It's not a web template as any other one you create for your users. So, this web template has some parts in it's code that works with the query execution. When you run a query, the system takes the query definition (made in QD) and executes it with the web template indicated for the query. This determination is made by the program that is used to run queries. You can try using RSRT transaction to debug and check how this it's done. If you want to change the default web template used by query designer to run the queries, you should do it copying any standard template, like the one you mentioned. If you don't do it, you won't get the information correct.
    Hope this helps.
    Regards,
    Diego

  • Web Template for BEx Query?

    Hello,
    How to find if there is any Web Template exist for a given BEx Query?
    Thanks,
    Dona Hill

    Hi Dona,
    You can find out by looking up the query in the metedata repository (RSORMDR) or by just pulling and collecting it in the transport connection.
    Hope this helps...

  • Default Web Template for port 8001

    Hi,
    We are using single sign on with EP and BI.  When I execute my queries port 8001 is used.  I really like the standard template that is shown but need to add a couple of buttons.   What template is this and how do i hook it up to use my modified version as the standard?   It doesn't look like 0Analsys_Pattern.  
    http://erppbi01.erp.co.marin.ca.us:8001/sap/bw/BEx?sap-language=EN&bsplanguage=EN&cmd=ldoc&QUERY=ZMOMVACT01&VARIABLE_SCREEN=X
    thanks
    heather

    Hi Aleksi,
      Pls. see if this helps you...
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/f9/7f12403dbedd5fe10000000a155106/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/library/biw/2.0/2.0bReportingAgentincl.PrecalculatingWebTemplates.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/fe/1f813b310c4a0ee10000000a114084/content.htm
    Thanks,
    Raj

  • How to define a standard web template for a specific group of queries?

    Hello experts,
    I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
    Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
    Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
    Thanks in advance,
    Helder

    I have figured out how to  slice it up myself,  however it appears as though I have to do it all  manually, drawing  each box myself.
    Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
    This will result in either ALLOT of  work making sure  that each box is perfectly aligned with the one before  it, or uneven  slices.
    I am obviously doing something wrong.
    Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
    As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
    Mylenium

  • Cannot set default web template

    Hi
    I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis.
    It works fine in Dev, but in Production the system seems to ignore the setting!
    Even when I write a dummy template that doesn't exist I get no error message !
    Please advice
    Regards
    Shlomi

    D Nore did you found the way to do it ?
    I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
    I tried :
    pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
    (this one was working before upgrade to netweaver stack 17).
    as well as
    pcd:portal_content/templates/iviews/sap_bw_report_iview
    and
    pcd:portal_content/templates/iviews/sap_bi7x_report_iview
    none works !
    If you have the tricks share it with us.

  • Design Suggestions for Default Web Template

    I am starting to develop some web applications for 7.x and do not want to use the default BEx Web Template only because it offers so much functionality that either is too complicated for users, not needed by users, or we don't want them using.
    I am wondering how to approach this effort in developing a good default web template.  Does it make sense to use a default template since each query can be so different?
    Does anyone have any suggestions about what to include, exclude and why?  Any details about the template you designed would be greatly appreciated!
    Thanks

    Hi,
    Please refer the following URL:
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/281a3c9c004866e10000000a11402f/frameset.htm
    Thanks,
    Venkat

  • Error on page from BW 3.5's default web template

    Hi Guru's,
    We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we aren’t sure why.
    On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
    Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5’s default template. The prompt web page is fine. No errors on page messages.
    However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
    This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
    The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
    SAPBWSetFocus(anchor);
    Error: Object expected
    Code: 0
    It’s in the set_tab() function.
    <script type="text/javascript">
    <!--
    /* Calls the online Documentation via technical QueryName */
    function callquerydoc() {
      var docustart= '/sap/bw/doc/meta/fldmeta/default?tlogo=elem&objnm=' + document.getElementById('querydoc').innerHTML;
      SAPBWOpenWindow(docustart,'Documentation',800,600);
    /* Sets the displayed tab */
    /* Check, which items of the Array check_items  is not hidden.
        Change the style of the HTML tag with id Group+Area/Group+Link */
    function set_tab() {
         if (!(navigator.appVersion.substring(0,1) == '4' && navigator.appName == 'Netscape')) {
           var check_items = new Array('GR1Toolbar','GR2Chart','GR3TECommon','GR4Broadcaster');
        for (i=0;i<check_items.length;i++) {
                        hidden = true;
                       prop = SAPBWGetItemProp(check_items<i>);
                       if (prop != null){
                                           for(j=1;j<prop.length;j++){
                                                      if (prop[j][0] == "HIDDEN")  hidden = (prop[j][1] == "X");
                   anchor_item = document.getElementById(check_items<i>.substring(0,3)+'Area').firstChild;
                    if (hidden) {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTab';
                        anchor_item.title = 'Inactive Tab Page:' + ' ' + anchor_item.title; 
                    else {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTabSel';
                        anchor_item.title = 'Active Tab Page:' +' ' + anchor_item.title; 
              } /* if */
          }   /* for */
        /* Set the BexHeader invisible when running as IView */
            if (SAPBWGetProperty('RUNS_AS_IVIEW')) {
                               document.getElementById('bexheader').style.visibility='hidden';
                               document.getElementById('bexheader').style.display='none';
              anchor = window.location.hash.substring(1,50);
              <b>SAPBWSetFocus(anchor);</b>
      }  /*function */
    -->
    </script>
    Because the error goes away as soon as we navigate I’m thinking some object isn’t being created or initialized, but since the view source code of these pages are identical I’m wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
    Any help will be much appreciated.
    Thanks,
    Jeri

    Heike,
    Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
    I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
    I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
    Please, do you have any other suggestions?
    Thanks,
    Jeri

  • Fix table header line of Query in default web template WAD 7.0

    Dear all,
    I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query. 
    My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
    Many thanks in advance for your answer and help!!!
    Best regards
    Abdel

    Hi Dion,
    Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
    Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested. 
    Best Regards
    Abdel

  • Error when changing default web-template

    Hello experts,
    I´m facing the following problem and I don´t know what to do:
    I´ve created a new web template in WAD 7.0 and set it as deafult web template for ad-hoc analysis in transaction SPRO.
    When I want to execute a query in web e.g. from the Query Designer 7.0 I get an error loading web template (brain 276 / "template not found in master system").
    I´ve already checked note 1014795, but it doesn´t help, because I don´t want to start the template with RSRT or iView in Portal. I want to use my template as default template for BEx 7.0.
    Any idea??
    Thanks a lot in advance.

    issue solves: just entered the wrong technical name in spro... :/

  • How can I set the default home page for all new users in Firefox 4

    I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
    Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
    Best regards
    Jonas

    In Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
    ) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
    See:
    *http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
    You can also use a mozilla.cfg file to set the default value for prefs.<br />
    See: http://kb.mozillazine.org/Locking_preferences
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes
    lockPref(); // lock pref, disallow changes

  • Creation of Web Template for SAP R/3 Transaction

    Hi ,
        How can i create my Web Template for SAP R/3  
        transaction for publishing in ITS ?
        I have created my own Z transaction of
       (Module Pool ), <b> How  can i create Template & run 
       it  through web .     </b>
    Regards
    Sachin S M

    Go to transaction SE80
    choose internet service option.
    enter a name for the service and hit enter, the system will prompt with a message that the service is not available do you want to create clik yes.
    choose the radiobutton screen based application and enter the transaction code and hit enter.
    once the service is created, right click on the service name and click create Template, enter the program name (it will be defaulted from the transaction) screen number and hit save.
    once created you have to activate it and publish it to ITS server.
    Which version of SAP are you using? you can show your transaction on the web using ITS without creating template also.
    Regards
    Raja

Maybe you are looking for