Setting up different e-mail notifications

I have four different e-mail accounts on my phone and need to set a different notification for two of the accounts, and I want no notification for the other two. When I change one notification, it automatically changes all of them to the same thing. Does anyone know how I can set each one individually?

You would have to have your ISP set up addresses for them, then they can configure Mail or what ever program you use, to pick it up using their own identities.
Miriam

Similar Messages

Using 2 blackberries on the one desktop software - setting up different e-mail accounts on each

Hi. Can anyone help me please. I have just got a second Blackberry (pearl 8110 blue) my other one being the new Bold. I want to setup different e-mails on each; how do I do this using the software as I cannot setup the e-mail just using the phone. I have worked out changing device but that's as far as it goes. Thanks
Solved!
Go to Solution.

Bruno1798 wrote:
Sorry, don't really understand what you mean. I have 2 different accounts from O2. One has blackberry included as part of the service the other is for light use so I have to pay for the blackberry section as I use - it is this latter one that I need to setup a couple of different accounts for.
You will need the BlackBerry Data Plan on both accounts, including the one you want for "light" use.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Setting up different e-mail accounts for different users?

Hello:
I have three different users with three loggin id's on my iMac. My e-mail account is set up so that I get all e-mail on my mac when I log in. Can I set up the other 2 users with their own e-mail addresses? How?
Thanks

You would have to have your ISP set up addresses for them, then they can configure Mail or what ever program you use, to pick it up using their own identities.
Miriam

CUP-GRC 5.3-E-mail notification

Hi experts,
Does anyone know where you can change the link is already set at the e-mail notification?
I mean when the owner approve the request and the stage is finished an e-mail notification is coming into the in-box, thus after reading the issue message a link is posted. Trhough that link you can go into CUP. I have two different kind of links:
http://grcds01.ree.es:50000/AE/index.jsp?loadRequestStatusSearch.do ( is coming from the E-mail reminder configuration)
Vista ( coming from the stage e-mail notification configuration)
Where can I change the URL'as name? The last one is not so much clarifiying to the user.
Thanks in advance for your help!

Hi there,
So as I understand it from this thread, the email reminder doesn't have a URL and we can insert our own. In case I've understood this correctly, then I wish to insert a URL that will take the user to that request directly, rather than to a list of pending requests, or any other page.
However, I don't have the URL that will allow me to do this. Do you know how I can have the user click on a link in the reminder email, and then have them go directly into the request?
Thanks,
Santosh

SCOM 2012 E-mail Notifications

I am monitoring router interfaces on SCOM. One particular interface on the router we can only use the class of objects, Interface.
On the dashboard I created, I can select a router and the description shows the MIB2 name for PATH. I set up an e-mail notification. In the e-mail notification it I used:
$Data/Context/DataItem/ManagedEntityFullName$
It returned the info below.
System.NetworkManagement.NetworkAdapter:00-00-00-00-00-00;IF-adsl-012-251-001-042.sip.sdf.bellsouth.net/2
The name "IF-adsl-012-251-001-042.sip.sdf.bellsouth.net/2" doesn't tell me which location is having an issue with their router. The MIB2 name and "Interface Alias" (object in the class, Interface) is the only thing we
can edit on router to describe location.
I need a way to make $Data/Context/DataItem/ManagedEntityFullName$ show the MIB2 name or a way to place the object, Interface Alias, in the e-mail notification.
Any help is appreciated.
Thanks.

Have you tried some of the variables found here?
http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx

ChaRM: mail notification to requester

Hi!
I would like to set up an automatic mail notification for requester of the change request (SDCR), when the Change Manager approves or denies them.
The problem I am currently facing:
when the fields "Sold-to-Party"and "Requester" have the same partner/user no mail notification will be send.
Does some one know a workaround to solve this bug?
Thank you very much!
Regards
Thom

Hi,
Can you please share , how you configure mail notification in charm.
Regards
Andrew

ChaRM: mail notification of requester

Hi!
I would like to set up an automatic mail notification for requester of the the change request (SDCR).
Scenario:
When the Change Manager approves the change request (SDCR) then the requester should get a mail.
What I have done:
Creation of action condition "Z_mail_to_requester"
for action profile "SDCR".
partner dependent: (00000016 Requester)
First question:
When I look into the change request --> Partner I can see that the requester has another number.
(00000010 Requester)
Is that a SAP bug?
Then I defined the schedule condition:
&Servicevorgang CRM Error.FreeFlag& = X
and
&Servicevorgang CRM Error.Userstatus& [] E0004+DCRHEAD*
My problem: the action will neither scheduled nor executed shen the Change Manager approves and saves the change request.
Can some one hell me please?!
Thank you very much indeed!
Thom

Hi All,
I configured Change request mang. in my solution manager server. now i want to create msg notification for all status changes in charm msg flow, like when change request approved by advisory board a automatic mail should generate for change manager.same as we use in service desk for mail notification.for all status changes.
on approval
on chane req. creation
on on every maintenance cycle phase change........
So please let me know few things which may be used for this activity.
1. PPF application
2. Action Profile
3. Action definition entry
4. smart form.
if any more input require , please let me know.
Regards
Andrew

How do I set up a POP mail account to use a different outgoing SMTP port?

How do I set up a POP mail account to use a different outgoing SMTP port? on Maverick O/Sx. Cannot see option to use 2 different ports?

In Mail>Preferences>Accounts tab>Account Information tab - from the 'Outgoing Mail Server (SMTP):' drop-down menu select 'Edit SMTP Server List...', choose the server you want to edit from those listed, click on the Advanced tab. Does that give you the option you're after?

Mail notification set up in OEM

hi
can any one help
i am trying to make set up the mail notification in oracle enterprsie manager
but i am getting the following error
EXVMBX003-4.exch003intermedia.net: Test failed with message: "Could not connect to SMTP host: EXVMBX003-4.exch003intermedia.net, port: 25; nested exception is: java.net.ConnectException: Connection refused: connect"
can any one explain what steps i need to do in my exchange outlook to avoid that error.

According to the error message your SMTP host doesn't allow you to connect.
This can either mean the host is not running on port 25, or you need to have your firewall opened.
As such the message has nothing to do with OEM.
You are advised to read error messages carefully, in order to avoid unnecessary questions. The problem is quite obvious, and has nothing to with Oracle.
Also, OEM communicates directly with SMTP and in the past Exchange didn't support SMTP.
I suggest you visit http://technet.microsoft.com
Sybrand Bakker
Senior Oracle DBA

Setting Up E-Mail Notifications BPF

Hi
we are looking for a good dokumentation of Setting up E-Mail Notifications for BPF.
We have read Operations-Guide and other Doks so the Blog of Jeffrey Holdeman but we couldn`t find the right way of configuration.
We must set the two paramters in Web Administration?
What is with the SMTP parameters?
What we have to do on ABAP Site? Must we configurate standard E-Mail configuration like scot, sost???
Or does BPC handle the communication?
What is the value of "WebServerName" in BPC-Server. Is it the BPC Server itself or is it a mailserver?
Could anybody explain it?
Thank you in advance

Hi
is there nobody who can help me?

Setting Up E-Mail Notifications On Servers

Hi,
I have a few physical servers running Windows Server 2008 R2 and Windows Server 2012and I would like to know how I would configure each server to send e-mail notifications if it goes down and if updates installed successfully or failed. I also use SCVMM
2012 to monitor the status of my virtual servers. Could you also let me know how I would setup e-mail alerts for each virtual server?
I would appreciate any advice and suggestions.
Thanks in advance,

This one may help.
http://technet.microsoft.com/en-us/library/ba2b022a-a767-4a35-b775-763c55e18e37#BKMK_2
I'd also ask them over here for more information.
http://social.technet.microsoft.com/Forums/en-us/home?category=systemcenter2012configurationmanager
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Error in MAIL notifications in AIA PIP 11g Status Code DELIVERY_TO_GATEWAY

Hi,
I am getting the following error while sending the mail notifications :
Operation     Send
Overall Status     Failed
Status Code     DELIVERY_TO_GATEWAY_FAILURE
Status Message     javax.mail.AuthenticationFailedException
Timestamp     Sep 1, 2011 1:56:14 AM CDT
In <AIAHome>/AIAMetaData/config/AIAConfiguration properties file , below properties are set <Property name="EH.INVOKE.NOTIFY">true</Property>
<Property name="FROM.EMAIL.ID">Email:[email protected]</Property>
<Property name="EH.DEFAULT.ACTOR.ROLE">AIAIntegrationAdmin</Property>
2) In em console, under UserMessagingService section , configured the below mentioned Email Driver properties
Sender Addresses : EMail:[email protected]
Default Sender Address :[email protected]
OutGoingMailServer :smtp.company.com
OutGoingMailServerPort :25
OutGoingDefaultFromAddress :[email protected]
3)And in http://<host>:<port>/sdpmessaging/userprefs-ui console added emails Id to user AIAIntegrationAdmin([email protected]) the user is already present in weblogic console Users list
the password for weblogic user and AIAIntegrationAdmin user are different as i have resetted the AIAIntegrationAdmin user password. will this cause any problem.
I am able to see the Sender Mail Id as '[email protected]' and Recepient Mail Id as '[email protected]' in the usermessanging server-->message status-->message details.
do i need to set any password for my smtp mail server in the server..if so please can you let me know in where to set the password for my mail id '[email protected]'
I have added the password for my mail id '[email protected]' in the OutgoingPassword -->Type of Password -- Use Cleartext Password --> 'entered my mail id password' under the UserMessagingService section Email Driver properties.
Thanks.

Hey thanks for ur Response.. The email driver configuration which i did was correct. I figured out the issue and the issue is with my userid which is not in LDAP so it is able to connect to SMTP server when trying to authenticate it is failing and throwing this error.

Turn off e-mail notification but not other?

Hi,
just bought the new Xperia Z3 Compact and I love the phone so far.
I have one problem though:
I want to have different notification signals for different apps and I have found my way in the menys to fix that.
BUT
for E-mail I do not want any notification signal at all, only the icon at the status bar.
I cannot find any setting within the e-mail app for notification, do I have to set the standard notification signal to none?
If so, will a new sms or calendar reminder notify me anyway?
I have tried this setting for a day now but it seems as if all notifications are turned off if the standard is set to none..?
Help please.

Actually, we still have settings for notifications in the email app but it's a bit hidden. You need to go to Email -> [menu] -> Settings -> [your account] and then tap the text "Notification" (don't tap the switch next to it).
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

E5 weird e-mail notifications

For those who have setup their home screen to anything different than "Active" and have the mail notification setup on the home screen, but don't get any sound and/or vibration - the problem is that sound and vibration will be played only for the 2 mailboxes setup in the "Active" standby mode, no matter which one you are currently using. If for example you want to use the "Contacts bar" mode and have sound/vibration for your e-mails, you must first switch to "Active" mode, set your account on the home screen, then switch back to "Contacts bar" and set it there also. I lost so much time to setup mail accounts, reset the phone several times etc. until I found this. I am so tired of Nokia and their latest "smart" phones...

Hi;
There is no logic as you describe in the Notifications, it will send every submission to the collaborators set up for Notifications.
Thanks,
Josh

I Have No Voice Mail Notifications In Z10 Hub

I have seen issues with Voice Mail Notifications in various threads, but I didn't see one having No Voice Mail Notifications In the Z10 Hub at all. Sorry if I missed a thread that applies.
From what I was told by Blackberry Technical Support, at the bottom of the BB Hub next to "Calls", "Emergency Alerts" and "PIN", should be "Voice Mail" (or something similar). I have none and therefore do not get any notifications when I receive a Voice Message. I thought this was odd, and figured I had some settings incorrect, but that is not the case. It's just not there.
I am in the USA on Verizon's network with the latest updated OS 10.1.0.2039 that they offered on a STL100-4, Z10.
Anyone else have this issue?

My wife had the same issue on her Z10.
A quick call to customer service at AT&T and they set it up.
Rebooted her phone, and all was well.
I'm sure Verizon customer service can do this for you as well.
Hope this helps.
Sincerely -

Setting up different e-mail notifications

Similar Messages

Maybe you are looking for