Setting up document for two-colour printing

I'm creating a document that will be printed using two colours: black and a Pantone ink. In the Swatches panel I have deleted all the swatches except for Black and my Pantone colour (and obviously None, Paper and Registration are still there). I have also created some mixed-ink swatches based on the black and Pantone colour.
I notice, however, that the Ink Manager still displays Cyan, Magenta and Yellow as well as the Black and Pantone. Acrobat's Ink Manager does the same, depsite the Preflight showing that it only produces two plates. (In the Output Preview, only the Black and Pantone channels show coverage, but the crop marks show on all five channels.)
Should I be concerned? Is there a way of setting up a document for two-colour printing that I've missed?
Any advice would be appreciated.

The ink manager is not a problem, bu the mixed colors potentially are, depending on the press being used. Some small 2-color presses use a single blanket and mix the ink on the blanket for overprints (which is what mixed inks are), creating a path for cross-contamination of the inks that can muddy the colors all around. You might want to verify that this will not be a problem on your job.

Similar Messages

Set of document for approval.

I have to send set of documents for approval to my client which are PDF format. For example :-
1) Project A - Total 5 Documents (PDF format)for Approval
2) Project B - Total 6 Documents (PDF format) for Approval
Like this daily I have to send 6 o 8 projects document to my client for approval in one set. I think I can use Document set for approval but not sure. Please advice.

Thanks Redecca,
I've created the document set and its working fine. Only I'm facing issue with Permission.
I've created Document Set in Document Library in SharePoint 2013. Here for this document set I've created
OOTB workflow from SharePoint Ribbon. So here User A will upload the document and User B will review put comment and approve or reject.
I've admin access so in the Document Library Setting "Permissions for this document library " I
clicked on "Inherit the Permission" and added these users A & B with Design access.
Now user A is able to login and upload the files in document set but to create or use the Document Set which
I've created he is getting error "Sorry, you don't have access to this page".
Now here I want to give access to user A and B only for the Document Library so they can access/use the Document
Set which I've created, Upload the Document and user B can approve it. Also here in Left Navigation I want to show user A & B "Task" option which is also not showing to view the "Approval Status".
Before your post I posted this issue on below link as its look like different request. Could you please have a look and advice please.
https://social.msdn.microsoft.com/Forums/en-US/0d460adb-c914-45d6-a637-61fc3fea5595/how-to-provide-access-only-for-document-set-to-upload-and-approve-the-documents?forum=sharepointadmin

HT1386 How can I have two seperate sets of Playlists for two different iPods on one computer?

How can I have two seperate sets of Playlists for two different iPods, on the same PC?

Open itunes.
Make whatever playlists you each like.
Connect one ipod, select only what you want, sync
Do the same for the other ipod

Best Printer for Two-Sided Printing?

Hi all,
I do a lot of printing of very long documents (up to 300 pages each) - right now I have an Epson CX4800 Inkjet which works very well, but I fear I am running it into the ground. Also, I am going through tons of paper and ink. I'd like to get an inexpensive laser printer (under $300) that can do duplex (two-sided) printing so that I can use less paper when printing out early drafts of projects. I don't want to have to manually flip the pages over and put them back through the printer because I am a ditz and a klutz and always wind up getting the pages in the wrong order when I do this - thus wasting even more paper. I just want a printer that can do automatic two-sided printing for under $300. Am I delusional?
mac mini Mac OS X (10.4.7)

No matter what printer you are going for (please specify if you are looking for a colour or mono laser), the biggest expense you would encounter are consumables: toner, drums, transport belts, fuser unit. The reason you should do that first is that consumers are lured into buying a cheap printer and by the time of the first toner change they have to spend as much money as they did on a printer.
What you have to do first is look around for a printer that has lowest cost for consumables (i.e. lowest cost per page print). The easiest thing to do would be take a supplier of consumables, and write down all the prices for the toner for specific models of printers, then divide them by the number of pages you can print from that toner - in this case you will get a breakdown for each colour: say, a replacement toner costs £50 and yields 4500 prints (with standard 5% page coverage) = 1p per page for that colour. Then compare this costs against the costs of your other candidates and you got yourself the most cost-efficient printer.
Besides that though, you might hav e to spend money on things like drum (lasts for about 25000-40000 pages in SOHO printers) and transfer belt (again, 25000-40000) - but that all depends on a printer, as sometimes toner and drum are separated, so you have to get both, sometimes they are in one set, which cuts your costs.
In my case, I've got a Xerox Phaser 6120, and although it might not be suited for you, it's OK for me as duplex unit can be added on, and I don't do this many prints. In your case my biggest concern would be, as I have said, the prices for consumables.

How to set up passwords for two Comcast email accounts on Mail?

Have Leopard. Cannot set up passwords on Mail for two Comcast email accounts. Does anyone know how to do?

Hi Paul, & a warm welcome!
Lineone
Login
[email protected]
Incoming email (IMAP)
imap.lineone.net
Incoming email (POP3)
pop3.lineone.net
Outgoing email (SMTP)
smtp.lineone.net
What port & Authentication are you using?
Can you login with your credentials in a Browser using the same info?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
Then click the Show Details button & Check again.
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Any recommendations for A3 colour printer for small studio?

Need a printer to do A3 or A3+ printouts for client mockups in small studio.
Can anyone recommend one? Needs to be networked with 3 people using it.

Formally, your question belongs on the Apple ColorSync Users list and not here, but Pages is the place where photography and typography come together, so here goes.
1. Stay away from toner-based printing devices. They tend to have a tiny gamut, too small for the RGB colour space in which you capture and correct your photographs, and too small for proofing.
2. Stay away from printing devices intended for the office imaging market. These devices tend to have a small hardwired RGB colour space, that is, sRGB.
You may not be able to work around the cap on the colour gamut in an ICC characterisation of the colour device, so you can't get at its full colour gamut.
3. For presentation printing and proof printing, a graphic arts CcMmYK inkjet with bright and neutral white substrate produces a colour gamut you can use in two ways.
a. For presentation printing you can address the whole gamut of the inks+substrate, reproducing as much as possible of the colour space within which you capture and correct photographs. Use the smart 3D gamut comparison in the ColorSync Utility to see what you could be loosing.
b. For proof printing you can clip the large gamut to the size and shape of the gamut of the intended printing condition, adding paper white simulation for D50 visual matching and matching by colour measuring instrument for contract proofing using a control strip.
There are contract quality presentation-printing and proof-printing RIPs for Mac OS X Server. BEST/EFI Colorproof by a group of people in Germany is one such. They have a forum where you can work out questions on configuring rendering intents, or you can ask on the Apple ColorSync list.
/hh

Printer server for two HP printer on VISTA PC

I have just purchased a Dell pc with the VISTA operation system.
I have two HP printers: HP Laser Jet 4100, Model CAAC049A, Serial # USJNG10352 and a HP business inkjet 2250, Model C2691A#ABA, Serical # SSG095110PR.
I want to set them up so all PC's in the house can access them. I had been using an old Linksys printserver that is no longer support and will not work with VISTA.
Is there any way that I can get these printers set up to work with VISTA and a print server? I know I can add a card to each that will let me use an HP jet direct card. I have also seen a parallel print server for sale on your web site.
What options do I have.

Hi,
Please use this:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=72892&pr...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Imageclass D530 settings for two side printing

My new D530 is set for front and back printing as OFF yet it still prints front and back even though no instructions to do so.
Could this be a driver problem? They have told me my driver sent with the printer is not correct for Windows 8. I tried downloading one from the sight. It did not load. I can print but stuck in double sided mode even though says OFF. Any suggestions?
Solved!
Go to Solution.

Hi jessasdad!
In the Mac OS X operating system, you will need to turn off 2-sided printing in each application. Please follow the steps below:
Click [File], and then [Print] in the application you would like to print from.
Click the drop-down arrow next to [Copies & Pages]or the name of the program. This depends on the program that you are printing from.
Select [Layout].
Set the 2-sided option as [OFF].
Click the "Presets" drop-down arrow and click "Save current setting as preset."
Name it "1-sided" or "Single-Sided" and verify that the imageCLASS D530 is the only printer selected.
Click "OK".
Print the document.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Making a file for spot colour printing.

Hi, so I'm at a print shop in Perth, our old graphic designer has left, and left us with a pickle.
We have a couple of digital printers here; we use a Fuji Xerox 5065 II for our main daily stuff.
We also print NCR books as a spot colour process on our Riso machine.
We are trying to print a hard copy of a client’s artwork on our 5065 that has a colour screen? (Sorry I’m not sure what the correct term is)
So that the colours show up as dots on the page and can be separated on our Riso?
I've looked into changing the DPI on an image, but this is an overall effect. Our old graphic designer somehow managed to have only the color sections of the page show up as dots and not the rest.
When I say dots, it's like the DPI on that part of the page is less than the rest so that it's clear to the naked eye that the image is made of larger dots?
Is there a way in Indesign, or any Adobe program or that matter on the 5065 if anyone knows the machine that I can adjust or create this setting?
I'm sorry for my naive wording on the matter, any help is appreciated.

Ok,
sorry for the confusion, like I say, this is the first time I've had to deal with the situation.
So......
if say you have a logo that has a text box, and the background of the text box is a solid colour.
if we put that logo through our Riso machine, it can't seperate the text from the background block, and so just prints it as a large coloured block.
Now, our old graphic artist, used to do this thing where he would take the text box or solid shape and he would change it from being a solid colour to being dots. like he changed the dpi but the dots were large enough to see with the naked eye.
this way when we put it through the Riso machine, it could seperate the text from infront of the coloured box and would print them both. The box would still be dotty but on the Riso it would look fine.
Hope this makes more sense, if not I'll take some scans when i get back into work on Monday.
Cheers in advance.

How to set up NAT for two servers using same port with ASDM ASA 5505

Hi there,
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. Here is the scenario: On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server:
Outside user enters FQDN:5004 and this translates to Database server # 1 as 192.168.1.40:5003
and
Outside user enters FQDN:5003 and this translates to Database server # 1 as 192.168.1.38:5003
If so, what is the easist way to get this done? Or is there a better what to handle this scenario?
Thanks in advance,
James

I would create two objects and use object NAT
object network Obj_5004
host 192.168.1.40
object network Obj_5004
nat (inside,outside) static service tcp 5003 5004
object network Obj_5003
host 192.168.1.38
object network Obj_5003
nat (inside,outside) static service tcp 5003 5003
Of course you will need to open your outside interface for tcp ports 5003 and 5004 to make this happen

Setting different resolution for two displays

Before I buy a Mac Mini I was wondering if I can connect two separate displays, one a 15" with XGA and the other a 8" with VGA. This is for an installation aboard a sailboat so I'm not looking to run HD, (not now anyway). I looked at the "System Preferences" on my MacBook to see what was available under "Display" and could not see where I can set up two displays with very different settings.
Is there a way to setup each display individually for simultaneous use? Thank you.

Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
Regards.

Duplicating Doc for Two Across Printing

I have finished a 4 x 8in information card - front page 1 and back page 2. The printer requested that, if possible, I provide a PDF file with the cards two across for printing. I have spent the past two days trying to determine how this could be done, but have failed.
Is this possible and, if so, how do you do it.
Thank you for yur help.
Steve

Export to PDF. Create a new page large enough and place the PDFs.
Then go find yourself a new printer.
Bob

Different set of values for two rings in an array of clusters

Hi, people.
Is it possible to do what it's shown in the attached picture?
I have an array of clusters. Two elements of the cluster are rings. Can I define a different set of values in the second ring (the one at the right) depending on the value selected in the first ring (the one in the middle)?
If not, could you give me a good alternative?
Thanks,
FranciscoMensaje editado por Porras
Attachments:
Rings.jpg ‏270 KB

I'm trying to do something very similar to your example but populate the comboboxes (or Rings) programmatically. What you have is so, so close but it seems to require input from the mouse to get the correct control. I don't really understand why you can change the String[] parameter in your program and it works fine but mine changes all the elements throughout the array. The Refnum for the control does not change regardless of what cell is selected. So, I'm a little puzzled how the correct cell or element is updated with the new combobox string.
Ultimately, I want to have an array of variables with an associated combobox (ring) of options. So, for variable Temperature, the options are Cold, Cool, Warm, and Hot. Then, variable 2 is Pressure, which might be Low, Medium and High. Yes, this is for a fuzzy logic controller (not part of the NI Controls Toolkit).
Any help is greatly appreciated!!!
Attachments:
TestRing.vi ‏19 KB

Access wireless set-up program for HP 3050 printer

I'm trying to connect an HP Deskjet 3050 J610 printer to my wireless network. It's an older model so the CD that came with it is not compatible with OS X 10.9.1, but the printer driver is already loaded in the operating system. So I'm able to print using the USB cable but when I try to connect with my Belkin router via WPS the printer won't connect because it has a pre-assigned SSID. I'm unable to find any configuration program on the computer that would allow me to change the SSID on the printer manually. So far HP has been no help so I'm hoping the Apple community might have a few more answers.

Usually this is the case but this is a rather old printer. It has no way to access a set-up program via the printer, only WPS capability. That's why I'm wondering if there is a way to access it via the computer. Mavericks has the driver built in but doesn't seem to have a way to access the printer set-up.

How to set single parameters for two tables?

SELECT GM.GRNNO,GM.GRNDATE,SUM(GS.APPROVED),SM.ISSUENO,SM.ISSUEDATE,GS.ITEMCODE,SUM(SS.ISSUEDQTY)
FROM IMS_GRNM GM,IMS_GRNS GS, IMS_ISSUEM SM, IMS_ISSUES SS
WHERE GM.GRNMSERIAL=GS.GRNSSERIAL
AND SM.ISSUEMSERIAL=SS.ISSUESSERIAL
AND GM.POSTED='T'
AND SM.POSTED='T'
AND GS.ITEMCODE=SS.ITEMCODE
AND GS.ITEMCODE='01-01-02-019'
AND *******
GROUP BY GM.GRNNO,SM.ISSUENO,GM.GRNDATE,SM.ISSUEDATE,
GS.ITEMCODE ORDER BY GM.GRNDATE,SM.ISSUEDATE;
******* here i have to select the data from both the tables between two parameters named :P_1 and :P_2.
the date column in IMS_GRNM is named as GRNDATE.
the date column in IMS_ISSUEM is named as ISSUEDATE.
how to set such parameters???

I think all you need is
Where table1.column1 between :p1 and :p2
and table2.column2 between :p1 and :p2

Setting up document for two-colour printing

Similar Messages

Maybe you are looking for