Setting up HP 3Com 5900 switch to send syslogs to Dell SecureWorks SIEM

Need command line information or documentation for configuring HP 3Com 5900 Core Switch to send syslog information to Dell SecureWroks. I have found HP ProCurve Core Switch documentation but it does not reflect the 3Com version.

Hi, Red:
I suggest you also copy and paste your post to the HP Business Support Forum -- Procurve Switches section.
http://h30499.www3.hp.com/t5/ProCurve-ProVision-Based/bd-p/switching-e-series-forum#.UsWPLul3u9I
Paul

Similar Messages

Set IP address of L3 switch using SNMP

HI,
I am using cisco catalust 3560-x series swtiches. And I am new to SNMP. I want to assign IP address to interfaces of this switch, using SNMP. Kindly help me. Any help, any sugession, is most welcome.
Thanks in advance
Jeni A

hi,
Thanks for your response.
Our requirement is as follows.
I want to assign IP address to Switch fro my Java Application. I have implemented a Telnet Client Code in Java, by which i can configure IP address in switch from my java application.
But my boss said, Telnet is not secure and try using SNMP to do the same.
When I was searching in Internet, I got this page https://supportforums.cisco.com/discussion/12090896/snmp-how-get-list-ip-addresses-and-corresponding-interface-names
The above thread gives object ID to GET IP address of Switch interface. This Object is Read-only.
In the similar way, is there any object, using which I can SET / assign IP address to switch interfaces.
waiting for your response.
Thanks in advance :)

I am trying to set up iCloud keychain, but it keeps sending the verification code to my land line, even tho I have gone into my apple account and changed to my mobile phone

I am trying to set up Icloud keychain, but it keeps sending the verification code to my land line (which I guess I entered back when I first got my MacBook). I have gone into my apple account and changed the # to my mobile phone, but it continued to send it to the land line. Probably is something simple, but I am not a techy!!

Hi,
As regardss to the iChat and iChat Sharing categorisation you have used.
In iChat 6 (lion) and Messages (Mountain Lion) the apps login to AIM and to Me.com
The Login to Me.com allows AIM to verify the password to the iCloud issued names (@me.com and @iCloud.com)
This "Dual" login also prevents the newer iCloud issued name from using this site
(it has extra Privacy settings that iChat can't access for your AIM and Aim valid Accounts)
Ignoring the @mac.com and MobileMe entries in the Add Account Screen in iChat and using the AIM one does not get around this issue.
AIM and @mac.com names still work in older versions of iChat.
The short answer is that iCloud issued Apple IDs do not work in iChat 5 or Earlier.
10:12 PM Friday; February 15, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Every time I try to download a game on my iPad it says please verify your account and follow the intrustion now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this pla

Every time I try to download a game on my iPad it says please verify your account and follow the instructions now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this please

Hi Mark ohara,
Welcome to the Support Communities!
The following articles will help you with your Apple ID verification:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account. You will be prompted to verify your email address.
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
I hope this information helps ....
Have a great day!
- Judy

My icloud email address is included in a friend's address group set up in Gmail. When they send an email to the group, the email never gets through to my icloud address - why?

My icloud email address is included in a friend's address group set up in Gmail. When they send an email to the group, the email never gets through to my icloud address - why?

They've always been able to send to me individually - just not when my email is part of a group or even when it's just included with several other addresses added one at a time.

Have new iPhone 4. Attempting to set up Comcast email. I can send but not receive. Help please.

I have new iPhone 4S. Attempting to set up Comcast email. I can send but not retrieve my Inbox directly from Comcast. Please help. Thanks.

Contact comcast and get the correct server settings for use on a mobile device.

Which switch is sending STP changing notificaiton?

Hi Team
On a layer two spanning tree network, how can I find out which switch is sending the spanning tree changing notification?
Thank you very much for your help!

What I believe we cannot monitor the "chaging notification", and we can only check the STP status and counter by "show spantree statistics" to determine the state is changed or not.
Please check below link for more information.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a0080094797.shtml
Hope this helps.
P.S. Are you really come from Cisco ? You should have lots of internal doc. describe it in more details.

EEM and sending syslog trap

When using EEM applet or even EEM Script I have noticed a behavior, when sending syslog message like this
action 30.1 syslog priority notifications msg "Usmerjevalnik $_info_routername: 1G LINK 2 UP (sla id = $sla_id) !!!"
message does not appear in switch buffer and is not sent to syslog server, except when using global logging level "debugging" like:
logging buffered 1024000 debugging
logging trap debugging
Is this normal behavior?
I'm using C6513/SUP720/ios 151-2.SY2 or 122-33.SXJ6
Regards,
Branko

Hi Branko,
AFAIk, this is an expected behaviuor , you need to have "logging trap debugging " command enabled to get the syslog traps.
Thanks-
Afroz
***Ratings Encourages Contributors ***

Cannot send syslog to server from a RV082

Good day everyone,
I'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server.
On the RV042, I've set the parameters for the syslog server, and it's working fine.
On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
Any Ideas?
Regards.

Mainly, my configuration is simple
at home
I have an RV042, and on the lan side, I have a NAS with SYSLOG server. The RV042 is sending syslog on the nas without problems. (10.10.20.0 /255.255.255.0)
On a Isolated Island, I got an RV082 with differents devices connected on the lan side. (10.10.10.0 /255.255.255.0)
I set an Gateway to Gateway link between the 2 routers and it's working fine.
From my home lan (10.10.20.0) I can get access to the router and the devices on the 'remote' lan without any problems.
But on the 'remote' router RV082 I set to send the syslog to the SYSLOG server, it's not sending anything. But when I ping the NAS (Who's having the SYSLOG server) I got no packet lost.
I've done a soft restart of the router, and also I tried to set as syslog IP on the RV082 my computer IP connected to the same lan as the NAS and monitoring incomiing UDP packets, I saw nothing.
My impression is someting is stuck in the router RV082 that prevent that service working.
The only issue is that router is in an isolated island and no one can come on site in case of an issue (if it"s not restating) exept from helicopter at XXK€ cost because see is frozen... So I have to be very carefull on what I'm doing..
Regards.

How to send Ctrl-Alt-Del to a PC on a mac laptop?

How to send Ctrl-Alt-Del to a PC remotely on a mac laptop?

jcc8 wrote:
Where can I find the foward-delete key?
Fn-Delete
Also, here is a list of all the keyboard shortcuts provided by Apple for future reference: http://support.apple.com/kb/ht1343

Send Syslog messages to multiple SYSLOG servers

Hi,
We are have two syslog servers defined, however we notice that the ACS only sends the syslogs to one server and will only send to the other in a failure scenario, which is a standard operation across all platforms. However we have a requirement for the ACS to send syslogs to both servers simultaneously, is there a configuration option for this?
Many Thanks
Leon Noble

You can do the following:
1) Create a remote log target for your syslog server at
System Administration >
Configuration >
Log Configuration >
Remote Log Targets
2) Configure the log categories that should be enabled to eb sent to this log target.
Go to
System Administration >
Configuration >
Log Configuration >
Logging Categories >
GlobalSelect a specifc category and then look at "Remote Syslog Target" tab.
For each category that you want sent to your syslog server select the remote log target in the "
Selected Targets" transfer box
Note that this configuration is hierarchical. So if make configuration for one log category it applies to all subtemding categories. For example if configure
"AAA Audit" then the configuration will apply to the pass and failed attempts categories

N5k and FI sending syslog

Hi, I would like to know the behaviuor of N5ks and FIs when they are sending syslog messages to multiple remote syslog servers. Do they send it only to the 1st in the list OR to all of them at the same time.
If I do "show logging server" on the n5k, it shows me 3 BUT as i do not have access o those servers, I cannot verify this.

Hello,
If you have configured three syslog servers, FI would send logs to all of them.
If you want to verify it and do not have access to syslog servers, then one way to verify whether we send the messages or not is to turn on the debugs.
connect nxos
debug logging
show debug logfile syslogd_debugs <<<<---- view the debugs
un all <<<---- turn off the debug
You can do the same on N5K and verify it's functionality.
Padma

WLAN APs send syslog broadcasts in controller mode

Hi,
in a test environment we use several 1131 wlan aps in controller mode with software version 4.2.176.0.
With wireshark running on a client pc in the same subnet as the wlan aps reside I saw that the wlan aps are sending syslog messages to the broadcast address 255.255.255.255 like "AP:<mac-address> %LWAPP-3-CLIENTERRORLOG: Decode Msg: could not match WLAN ID 5".
Does anybody know if this is expected behaviour and how I can correctly configure syslog on the aps in controller mode?
Many thanks in advance,
Thorsten Steffen

Hi,
Yes, the AP broadcasting syslogs is an expected behavior. It helps in troubleshooting AP join issues. If you don't want the AP broadcasting the messages you can either configure the AP's to send them as unicasts or disable the syslogging by defining a destination address of 0.0.0.0.
You would use the "config ap syslog host..." command on the controller to configure this. Obviously this command only works for the AP's after they have already joined the controller.

Ability to send syslog events to multiple syslog servers - SA540

Please add the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.

You can do the following:
1) Create a remote log target for your syslog server at
System Administration >
Configuration >
Log Configuration >
Remote Log Targets
2) Configure the log categories that should be enabled to eb sent to this log target.
Go to
System Administration >
Configuration >
Log Configuration >
Logging Categories >
GlobalSelect a specifc category and then look at "Remote Syslog Target" tab.
For each category that you want sent to your syslog server select the remote log target in the "
Selected Targets" transfer box
Note that this configuration is hierarchical. So if make configuration for one log category it applies to all subtemding categories. For example if configure
"AAA Audit" then the configuration will apply to the pass and failed attempts categories

Cisco ASA won't send Syslog out management interface

I have been trying to get my ASA to send syslog out of the management interface without any luck. When I do a packet tracer it says that the global implicit deny rule is blocking it, but I tried to add a permit all in front of it and it still blocks it. Everything is configured correctly from what I can tell and the static routes and routing are correct. This has me baffled. Does anyone know what might be causing this or what I should look at in the config to get this working?

Hi Mark,
Talking of packet tracer, it would give you correct output for a through the box traffic, not for to the box or from the box traffic.
So firstly we have two questions:
1) Is this a through the box traffic, then you need to permit the traffic through ACL(if from lower sec level to higher) and add a NAT statement(depending on the ASA IOS Version you are using anything above 8.2.5 wont require a NAT).
2) If this is a syslog from the firewall scenario, then you need to make sure to get the following logging configuration on ASA
-enable logging
-logging host management X.X.X.X --------(X.X.X.X is the ip of the syslog server)
-logging trap debugging ----------(debugging is the level, you could use any other too, but to check would sugest this one)
-Further if you have already sorted out till here, get us the following outputs:
-show run
-show logging
-show logging queue
Hope it helps
Cheers,
Naveen
Please Rate Helpful posts.

Setting up HP 3Com 5900 switch to send syslogs to Dell SecureWorks SIEM

Similar Messages

Maybe you are looking for