Setting up HP Officejet 6500A; not sure how to connect to web w/ home wireless network
I have a small home wireless network. I set the printer up today but it says that I must connect to the internet (fax part is working). The only desktop I have, I keep off most the time and just use my laptop (which is for work so I can't set the printer up to this).
Is there a way to connect the printer directly to my router? They are only a few feet from one another; however, I have no clue how to do it and the instructions manual didn't tell me much. Do I need a phone line? What would I use to connect the two?
This question was solved.
View Solution.
Use an Ethernet cable, available in any tech store, online or even Target will have them.
Plug it into the back of the printer and router. You should be able to add the printer to your laptop. Let me know what operating system you have and I can help.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
How to Connect Airport Express to Existing Wireless Network (Client Mode)
I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks -
How to connect to an ieee stander wireless network in school
I am a student of UNM.
we can't get the wireless connection to our ece deperment if OSX is above 10.5.
we can get the connect under windows and linux but not Mac.
I did asked our IT about this issuse, thire answer was Apple didn't following ieee wireless stander on newer osx.
I tried all the solution on interstant including using iphone developer tools, but it doesn't work.
Is any possible that feture update can fix this problem?That's a neat trick they used there, relying on IEEE standards, which never had any requirement for interoperability. Their wireless network, while IEEE standard, is not WiFi CERTIFIED as it still uses TKIP.
TKIP on WPA was an interim solution to WEP.
http://wifinetnews.com/archives/2010/06/say_goodbye_to_wep_and_tkip.html
You might send your IT department this link: http://osxdaily.com/2009/09/21/wireless-network-security-change-your-wpa-encrypt ion-from-tkip-to-aes/ -
I know I have wifi connection because I am on a college campus, my laptop and phone both get wifi but my touch won't I have tried receting everything and nothing is working
Not a good sign. See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Frequently it is due to a hardware problem an an appointment a the Genius Bar of an Apple store is in order. -
How to connect my G3 to a wireless network-
what do i need to connect my old G3 MAC to i wireless internet connection – my lokal AppleShop don't sell Airport to this old computer – do anybody know how i get wireless?
rberg,
all you need is a wireless router and a wireless internet card
Explore the links below. Just pay attention to the fact that you need to find a Mac compatible wireless PCI card.
The router is not a problem.
http://www.netgear.com
http://www.dlink.com/
I have one installed, serving our three B&W G3 (wired), and connecting wireless with our iBook (equipped with airport).
Their routers are airport compatible. You only need to set them up. -
Cannot find instructions on how to connect printer to a new wireless network.
HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.
Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp
I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!
-
downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
-
for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?
You can neither merge or delete them. Pick one and stop using the other. If they both have purchases associated with them you will have to keep using both.
-
I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end
If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself. -
please help im not sure how to fix this problem. It should work but has stopped working for some reason.
its already sorted my friend who has it already swwitched on turned it off and switched it back on again and its working on my phone okay now just need to check with other contacts if they have it on or not but thanks
-
My iPhoto app was digressed back to 9.5, not sure how I did it. I went to time machine and restored. Now it wont accept my password. tells me it is locked. Can anyone help me?
Run Repair Permissions in Disk Utility and see if that helps.
If not, you can select the iPhoto Library in your Pictures folder, go File > Get Info (or Command-i), go to the bottom of the info window and set your permissions to Read & Write. On the Action menu at the bottom (the one with the gear) choose Apply to enclosed items... -
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
Hello everybody. I am a web designer (NOT a developer)
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
Now I need to link the 'submit button' so that it will e-mail me the completed form.
(formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
(after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
-Brenna
The e-mail I would like the form sent to is:
[email protected]
Here is the the code for my form 'as is' :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Create a Profile</title>
<link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
<script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
</head>
<body id="main_body" >
<img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
<div id="form_container">
<h1><a>Create a Profile</a></h1>
<form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
<div class="form_description">
<h2 align="center">Create a Tommy Lemonade Profile</h2>
<p></p>
</div>
<ul >
<li id="li_1" >
<label class="description" for="element_1">Name </label>
<span>
<input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
<label>First</label>
</span>
<span>
<input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
<label>Last</label>
</span>
</li> <li id="li_23" >
<label class="description" for="element_23">Service Provider Type </label>
<span>
<input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_1">Barber</label>
<input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_2">Hairstylist</label>
<input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_3">Nail Technician</label>
<input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_4">Massage Therapist</label>
<input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_5">Skin Care</label>
<input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_6">Esthetician</label>
<input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_7">Make Up Artist</label>
</span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
</li> <li id="li_19" >
<label class="description" for="element_19">Top 5 services </label>
<div>
<textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
</li> <li id="li_20" >
<label class="description" for="element_20">List all services you offer & thier starting price </label>
<div>
<textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
</small></p>
</li> <li id="li_12" >
<label class="description" for="element_12">Personal Phone </label>
<span>
<input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_1">(###)</label>
</span>
<span>
<input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_2">###</label>
</span>
<span>
<input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_12_3">####</label>
</span>
<p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
</li> <li id="li_21" >
<label class="description" for="element_21">E-mail (Required) </label>
<div>
<input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
</li> <li id="li_6" >
<label class="description" for="element_6">Confirm your e-mail (Required) </label>
<div>
<input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
</li> <li id="li_3" >
<label class="description" for="element_3">Web Site </label>
<div>
<input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
</div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
</li> <li id="li_4" >
<label class="description" for="element_4">Place of employment </label>
<div>
<input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
</div>
</li> <li id="li_2" >
<label class="description" for="element_2">Work Address </label>
<div>
<input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
<label for="element_2_1">Street Address</label>
</div>
<div>
<input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
<label for="element_2_2">Address Line 2</label>
</div>
<div class="left">
<input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
<label for="element_2_3">City</label>
</div>
<div class="right">
<input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
<label for="element_2_4">State / Province / Region</label>
</div>
<div class="left">
<input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
<label for="element_2_5">Postal / Zip Code</label>
</div>
<div class="right">
<select class="element select medium" id="element_2_6" name="element_2_6">
<option value="" selected="selected"></option>
<option value="Afghanistan" >Afghanistan</option>
<option value="Albania" >Albania</option>
<option value="Algeria" >Algeria</option>
<option value="Andorra" >Andorra</option>
<option value="Antigua and Barbuda" >Antigua and Barbuda</option>
<option value="Argentina" >Argentina</option>
<option value="Armenia" >Armenia</option>
<option value="Australia" >Australia</option>
<option value="Austria" >Austria</option>
<option value="Azerbaijan" >Azerbaijan</option>
<option value="Bahamas" >Bahamas</option>
<option value="Bahrain" >Bahrain</option>
<option value="Bangladesh" >Bangladesh</option>
<option value="Barbados" >Barbados</option>
<option value="Belarus" >Belarus</option>
<option value="Belgium" >Belgium</option>
<option value="Belize" >Belize</option>
<option value="Benin" >Benin</option>
<option value="Bhutan" >Bhutan</option>
<option value="Bolivia" >Bolivia</option>
<option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
<option value="Botswana" >Botswana</option>
<option value="Brazil" >Brazil</option>
<option value="Brunei" >Brunei</option>
<option value="Bulgaria" >Bulgaria</option>
<option value="Burkina Faso" >Burkina Faso</option>
<option value="Burundi" >Burundi</option>
<option value="Cambodia" >Cambodia</option>
<option value="Cameroon" >Cameroon</option>
<option value="Canada" >Canada</option>
<option value="Cape Verde" >Cape Verde</option>
<option value="Central African Republic" >Central African Republic</option>
<option value="Chad" >Chad</option>
<option value="Chile" >Chile</option>
<option value="China" >China</option>
<option value="Colombia" >Colombia</option>
<option value="Comoros" >Comoros</option>
<option value="Congo" >Congo</option>
<option value="Costa Rica" >Costa Rica</option>
<option value="Côte d'Ivoire" >Côte d'Ivoire</option>
<option value="Croatia" >Croatia</option>
<option value="Cuba" >Cuba</option>
<option value="Cyprus" >Cyprus</option>
<option value="Czech Republic" >Czech Republic</option>
<option value="Denmark" >Denmark</option>
<option value="Djibouti" >Djibouti</option>
<option value="Dominica" >Dominica</option>
<option value="Dominican Republic" >Dominican Republic</option>
<option value="East Timor" >East Timor</option>
<option value="Ecuador" >Ecuador</option>
<option value="Egypt" >Egypt</option>
<option value="El Salvador" >El Salvador</option>
<option value="Equatorial Guinea" >Equatorial Guinea</option>
<option value="Eritrea" >Eritrea</option>
<option value="Estonia" >Estonia</option>
<option value="Ethiopia" >Ethiopia</option>
<option value="Fiji" >Fiji</option>
<option value="Finland" >Finland</option>
<option value="France" >France</option>
<option value="Gabon" >Gabon</option>
<option value="Gambia" >Gambia</option>
<option value="Georgia" >Georgia</option>
<option value="Germany" >Germany</option>
<option value="Ghana" >Ghana</option>
<option value="Greece" >Greece</option>
<option value="Grenada" >Grenada</option>
<option value="Guatemala" >Guatemala</option>
<option value="Guinea" >Guinea</option>
<option value="Guinea-Bissau" >Guinea-Bissau</option>
<option value="Guyana" >Guyana</option>
<option value="Haiti" >Haiti</option>
<option value="Honduras" >Honduras</option>
<option value="Hong Kong" >Hong Kong</option>
<option value="Hungary" >Hungary</option>
<option value="Iceland" >Iceland</option>
<option value="India" >India</option>
<option value="Indonesia" >Indonesia</option>
<option value="Iran" >Iran</option>
<option value="Iraq" >Iraq</option>
<option value="Ireland" >Ireland</option>
<option value="Israel" >Israel</option>
<option value="Italy" >Italy</option>
<option value="Jamaica" >Jamaica</option>
<option value="Japan" >Japan</option>
<option value="Jordan" >Jordan</option>
<option value="Kazakhstan" >Kazakhstan</option>
<option value="Kenya" >Kenya</option>
<option value="Kiribati" >Kiribati</option>
<option value="North Korea" >North Korea</option>
<option value="South Korea" >South Korea</option>
<option value="Kuwait" >Kuwait</option>
<option value="Kyrgyzstan" >Kyrgyzstan</option>
<option value="Laos" >Laos</option>
<option value="Latvia" >Latvia</option>
<option value="Lebanon" >Lebanon</option>
<option value="Lesotho" >Lesotho</option>
<option value="Liberia" >Liberia</option>
<option value="Libya" >Libya</option>
<option value="Liechtenstein" >Liechtenstein</option>
<option value="Lithuania" >Lithuania</option>
<option value="Luxembourg" >Luxembourg</option>
<option value="Macedonia" >Macedonia</option>
<option value="Madagascar" >Madagascar</option>
<option value="Malawi" >Malawi</option>
<option value="Malaysia" >Malaysia</option>
<option value="Maldives" >Maldives</option>
<option value="Mali" >Mali</option>
<option value="Malta" >Malta</option>
<option value="Marshall Islands" >Marshall Islands</option>
<option value="Mauritania" >Mauritania</option>
<option value="Mauritius" >Mauritius</option>
<option value="Mexico" >Mexico</option>
<option value="Micronesia" >Micronesia</option>
<option value="Moldova" >Moldova</option>
<option value="Monaco" >Monaco</option>
<option value="Mongolia" >Mongolia</option>
<option value="Montenegro" >Montenegro</option>
<option value="Morocco" >Morocco</option>
<option value="Mozambique" >Mozambique</option>
<option value="Myanmar" >Myanmar</option>
<option value="Namibia" >Namibia</option>
<option value="Nauru" >Nauru</option>
<option value="Nepal" >Nepal</option>
<option value="Netherlands" >Netherlands</option>
<option value="New Zealand" >New Zealand</option>
<option value="Nicaragua" >Nicaragua</option>
<option value="Niger" >Niger</option>
<option value="Nigeria" >Nigeria</option>
<option value="Norway" >Norway</option>
<option value="Oman" >Oman</option>
<option value="Pakistan" >Pakistan</option>
<option value="Palau" >Palau</option>
<option value="Panama" >Panama</option>
<option value="Papua New Guinea" >Papua New Guinea</option>
<option value="Paraguay" >Paraguay</option>
<option value="Peru" >Peru</option>
<option value="Philippines" >Philippines</option>
<option value="Poland" >Poland</option>
<option value="Portugal" >Portugal</option>
<option value="Puerto Rico" >Puerto Rico</option>
<option value="Qatar" >Qatar</option>
<option value="Romania" >Romania</option>
<option value="Russia" >Russia</option>
<option value="Rwanda" >Rwanda</option>
<option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
<option value="Saint Lucia" >Saint Lucia</option>
<option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
<option value="Samoa" >Samoa</option>
<option value="San Marino" >San Marino</option>
<option value="Sao Tome and Principe" >Sao Tome and Principe</option>
<option value="Saudi Arabia" >Saudi Arabia</option>
<option value="Senegal" >Senegal</option>
<option value="Serbia and Montenegro" >Serbia and Montenegro</option>
<option value="Seychelles" >Seychelles</option>
<option value="Sierra Leone" >Sierra Leone</option>
<option value="Singapore" >Singapore</option>
<option value="Slovakia" >Slovakia</option>
<option value="Slovenia" >Slovenia</option>
<option value="Solomon Islands" >Solomon Islands</option>
<option value="Somalia" >Somalia</option>
<option value="South Africa" >South Africa</option>
<option value="Spain" >Spain</option>
<option value="Sri Lanka" >Sri Lanka</option>
<option value="Sudan" >Sudan</option>
<option value="Suriname" >Suriname</option>
<option value="Swaziland" >Swaziland</option>
<option value="Sweden" >Sweden</option>
<option value="Switzerland" >Switzerland</option>
<option value="Syria" >Syria</option>
<option value="Taiwan" >Taiwan</option>
<option value="Tajikistan" >Tajikistan</option>
<option value="Tanzania" >Tanzania</option>
<option value="Thailand" >Thailand</option>
<option value="Togo" >Togo</option>
<option value="Tonga" >Tonga</option>
<option value="Trinidad and Tobago" >Trinidad and Tobago</option>
<option value="Tunisia" >Tunisia</option>
<option value="Turkey" >Turkey</option>
<option value="Turkmenistan" >Turkmenistan</option>
<option value="Tuvalu" >Tuvalu</option>
<option value="Uganda" >Uganda</option>
<option value="Ukraine" >Ukraine</option>
<option value="United Arab Emirates" >United Arab Emirates</option>
<option value="United Kingdom" >United Kingdom</option>
<option value="United States" >United States</option>
<option value="Uruguay" >Uruguay</option>
<option value="Uzbekistan" >Uzbekistan</option>
<option value="Vanuatu" >Vanuatu</option>
<option value="Vatican City" >Vatican City</option>
<option value="Venezuela" >Venezuela</option>
<option value="Vietnam" >Vietnam</option>
<option value="Yemen" >Yemen</option>
<option value="Zambia" >Zambia</option>
<option value="Zimbabwe" >Zimbabwe</option>
</select>
<label for="element_2_6">Country</label>
</div>
</li> <li id="li_5" >
<label class="description" for="element_5">Work Phone </label>
<span>
<input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_1">(###)</label>
</span>
<span>
<input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_2">###</label>
</span>
<span>
<input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_5_3">####</label>
</span>
<p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
</li> <li id="li_22" >
<label class="description" for="element_22">Schedule </label>
<div>
<textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
</li> <li id="li_7" >
<label class="description" for="element_7">Profile Picture </label>
<div>
<input id="element_7" name="element_7" class="element file" type="file"/>
</div>
</li> <li id="li_8" >
<label class="description" for="element_8">Portfolio image </label>
<div>
<input id="element_8" name="element_8" class="element file" type="file"/>
</div>
</li> <li id="li_9" >
<label class="description" for="element_9">Portfolio image </label>
<div>
<input id="element_9" name="element_9" class="element file" type="file"/>
</div>
</li> <li id="li_10" >
<label class="description" for="element_10">Portfolio image </label>
<div>
<input id="element_10" name="element_10" class="element file" type="file"/>
</div>
</li> <li id="li_11" >
<label class="description" for="element_11">Portfolio image </label>
<div>
<input id="element_11" name="element_11" class="element file" type="file"/>
</div>
</li> <li id="li_13" >
<label class="description" for="element_13">Portfolio image </label>
<div>
<input id="element_13" name="element_13" class="element file" type="file"/>
</div>
</li> <li id="li_14" >
<label class="description" for="element_14">Portfolio image </label>
<div>
<input id="element_14" name="element_14" class="element file" type="file"/>
</div>
</li> <li id="li_15" >
<label class="description" for="element_15">Portfolio image </label>
<div>
<input id="element_15" name="element_15" class="element file" type="file"/>
</div>
</li> <li id="li_16" >
<label class="description" for="element_16">Portfolio image </label>
<div>
<input id="element_16" name="element_16" class="element file" type="file"/>
</div>
</li> <li id="li_17" >
<label class="description" for="element_17">Portfolio image </label>
<div>
<input id="element_17" name="element_17" class="element file" type="file"/>
</div>
</li> <li id="li_18" >
<label class="description" for="element_18">Portfolio image </label>
<div>
<input id="element_18" name="element_18" class="element file" type="file"/>
</div>
</li>
<li class="buttons">
<input type="hidden" name="form_id" value="836144" />
<input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
</li>
</ul>
</form>
<div id="footer">
</div>
</div>
<img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
</body>
</html>I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O. -
Hi,
I have an iPhone and I sync playlists to it from iTunes. (I have far in excess of 16GB of music/podcasts.)
What I want to do is permanently share my music library with all devices in the house, so I'm planning on buying a NAS server that has a built-in iTunes server. (I don't want to just use my computer to share and leave it on 24/7 because that is a phenominal waste of power.) That way all networked computers can just load the library under the 'SHARED' option in the left pane. However, this had me wondering about how I will continue to sync my music to my iPhone? I wondered if I will need to maintain a duplicate of the library on one of my computers, and then have my iPhone sync with that. Otherwise I'm not sure how it'll work.
Any help/comments/suggestions will be greatly appreciated.
Tom.Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.
-
I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
How can I add my iPhone 5s to the list of devices on the correct Apple ID?
Thanks in advance for any advice.Found the answer to my question after posting (in related discussions)
https://discussions.apple.com/message/12331666#12331666
Will call Apple Care as soon as I can.
Maybe you are looking for
-
hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india it is i phone 4s
-
Hi, In PO Price History (Tx Me1P) system is showing all the items including deletion flag items also but we dont want to compare with deletion flag items hence how to get this? we have to use z report na? Thanks Prasad
-
I have some files written in Clarisworks 2.0 around 1995. I now have a new iMac with Tiger and Appleworks 6. When I click on these files they won't open, I get an error message. Is there any way to save them? Plus, can I convert a large number of fil
-
Adobe Creative Suite 5.5 transfer license from mac to windows
Hello, In 2011, I bought a license 'adobe Creative Suite 5.5' (students) for a mac. My Macbook crashed again and I want to switch to a PC. Is it possible to switch my license from mac to windows? Thanks
-
How to view different sine waves in an array and make an fft of these and display it in one graph
How can i cannect the output of my mathscript in the Spectral Measurements VI SIgnal Input. I'm having a problem since the output of the mathscript file "D" is DBL 2D. I dont know how to convert this data type in order to be connected to the signal i