Setting up KM reporsitories in DBFS mode

Hi All,
Thank you for your support for my previous questions.
I need to set up the KM CM repositories in DBFS mode. I had this earlier in DB mode. I came to know i can migrate the documents from DB mode to DBFS mode using content crawler report.
I need some clarification before i start up with the process.
1. Is there any links/articles or Blog for setting up in DBFS a step by step approach.
2. In addition to content crawler report, is there any additional steps to do like Indexing..
3. When the contents are migrated from DB mode, does the actual content is moving to file system or a copy is done? Does the DB size will reduce after that?
This questions will help a lot for proceeding in changing the persistence. As reverse conversion is not possible, some detailed preparation will help me.
thanks,
Senthilkumar

Hi Senthilkumar,
Sorry for a late reply.
In DB persistence, does it advisable to store around 50 K or more documents?
I know only one restriction recommendation for DB mode regarding an amount of documents: do not store more than 1000 files in a single folder. According to Note 900571 DBFS and DB do not restrict the maximum amount of the resources (Folders, documents).
As per SAP recommendations for larger quantity, DBFS should be used right.
It is not correct. The DBFS mode is faster than the database mode if you have large documents. But if there is a large number of write requests in your CM usage scenario, I believe it is true due to the nature of Collaboration Rooms, set up the CM repository in database mode (refer to [CM Repository Manager|http://help.sap.com/saphelp_nw70/helpdata/EN/62/468698a8e611d5993600508b6b8b11/frameset.htm]).
Does the room extension CM comes under SAP standard delivery?
Yes, for sure.
What about old 400 rooms?
If you decide to use DBFS for new rooms, I suggest analyzing the current and possible usage of old rooms in short-term future at first. Maybe some of them are subject for removal and you may leave the rest as is.
Best regards,
Aliaksandr Zhukau

Similar Messages

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

Document repository in fsdb/dbfs mode

Hi,
Has anyone implemented the document repository in fsdb / dbfs mode? I am looking at possiility of storing documents in different server from where KM is installed. TREX needs to be able to search the documents as well.
Please advise how the configuration would differ in this scenario.
Points definitely will be awarded to answers that guide me in the right direction.
Thanks and regards,
Arun

Hi Arun,
Here is the weblog we followed for implementing FSDB in our system (EP6.0 SP2):
Creating a CM Repository Manager - FSDB
We were also able to migrate existing documents from DB persistence mode to FSDB. The trick is to first download all the files via WebDAV to your storage folder, then point your FSDB repository to this folder. This way your existing properties won't get deleted during the transition. I still advise to do a full KM backup before this operation, unless you're starting from scratch.
Hope this helps,
Olivier

Using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

I had this same thing happen to me. I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen.

TS3771 Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

It may be because of your settings. You can modify that setting in System Preferences > Trackpad. Another way of making right-click is to click the app icon while holding the Control key

How to set input ready query to display mode and set edit mode in WAD?

when I create A input ready query but not set query propery start query in change mode ,but I want to set this query in input ready mode ,how to set this in WAD?
hope anyone can help me
regard by
wenlong

Hi,
      You can get all the info from this thread , try it out
       WAD - set data entry mode
       Hope it helps.
Regards,
Priya.

Unable to connect to Linksys E3000 when set to 5GHz "N" only Network mode

I've not been able to connect to my to Linksys E3000 when set to 5GHz "N" only Network mode. Connections to the 5GHz can only be done in mixed mode. I do not need to have A-Mode enabled, so I do not wish to use mixed.
Tested with a variety of adaptors, most recently my Intel® Centrino® Ultimate-N 6300 .

Thank you for your response.
I have Win 7 Ultimate.
Wireless NIC: Intel® Centrino® Ultimate-N 6300
Latest Driver: 14.0.1.2
I took your suggestions, and verified the firmware is current.
Channel Width: 40
Channel: 161
Also, I have turned security off for testing.
If Network Mode = N Only, I see and can 'connect', but then get the error below:
If "Network Mode:" = Mixed, there is a connection, but Status-> Local->DHCP Clients verifies it as "A":
w520 Wireless-A 172.222.1.33 00:xx:x7:AE:xx::0C 23:59:45
I have the latest firmware
Firmware Version: 1.0.04 build 6 Dec 6, 2010
Firmware Verification: 1ad912eecfd4c2226624cc8ff9b43820
The error from Windows is non-specific:

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

Pumpkin-Hill, Let's get your ringtone working properly. Go to settings and tools, press 'ok', select sound settings, press 'ok', choose call sounds. then press 'ok' and select call ringtone and select the desired tone. Let us know if this helps.
sheritah_vzw
Follow us on Twitter
@VZWSupport

Setting SPRO authorization only in disply mode

Hi,
I am working on authorization objects in anew role.. What is the name of the authorization object where I can set the activity for SPRO (Customzing) only in display mode ?
Thanks.
Regards,
Rajesh.

You dont need to do all this. Just create a role and add SPRO to it. Then maintain all the objects in that role to Display (Activity 03) ONLY.
However, this will not allow you access to all the zillion Tcodes that SPRO allows access to. In order to allow this, you will have to manually add ANOTHER S_TCODE object to that role and assign a * in it. So then you have access to all the Tcodes, but Display only.
This will do it for you. It did for me.
Edited by: Kunal Belnekar on Apr 1, 2008 2:53 PM
Edited by: Kunal Belnekar on Apr 1, 2008 2:54 PM

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

How do I set the Shutter Speed in Manual Mode on my EOS 70D

I recently was forced to upgrade to a Canon 70D after my 50D died from a fall. I am not happy with the ease of setting the Shutter speed while in Manual mode. The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen. The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D). I can control the Aperture with the quick control dial. The Function Lock button is off.
I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual. I would greatly appreciate it if someone could help me with this issue.
Thanks
Gene

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

Dynamically set number of sockets in parallel mode

I am new to teststand (been programing LabVIEW for a long time)
I know this is do-able but not sure where to implement it - hoping for an example.
Before the 'Test UUTs' entry point I would like a message popup;
- based on the user button pressed I would like to set the number of sockets to either 3 or one (three sockets when running in auto mode, one socket if running in manual mode) all within Parallel model (can't change models on the fly)
ideally I would like the entire thing encased in a loop that would ask "auto, manual, exit" so that a manual session could be run, and at the completion one or more sessions in auto mode before exiting.
SO WITHIN EITHER A MANUAL OR AUTO SESSION 'NEXT UUT' WOULD STILL BE AVAILABLE, and after exiting from next uut the outer loop would still allow switching session modes
the loop would need to be right up front so the number of sockets could be set before the mode options are loaded.
if there is an example of a modified parallel process model that has similar mods, I would be very gratefull,
thanx
lmd2
ALE System Integration
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]

Hi lmd2,
Attached is a quick example of one way to do what you are asking. This is only a general example, and there may be a bettter implementation depending on the architecture of your application. The link here also has information on setting the number of sockets for a specific sequence file. Hope this helps.
Regards,
Ebele O.
National Instruments
Attachments:
ParallelModel.seq ‏455 KB

Can 4s be set to a screen sleep/hibernation mode?

Can the 4s be set to a sleep/hibernation mode?

What do you mean? You can already set the time frame for sleep: Settings>General>Auto-Lock.

After setting the db to archive log mode what to do?

Hi All,
We have a database which is being used as production database since one week and running in NoArchive Log mode. Now i wanted to change that to Archive Log mode because i want to take hot backup using RMAN daily/weekly. My doubt is..after changing the db to Archive Log mode, can i take backup using RMAN (i got a RMAN script to take a hot backup of db)? which will contain all the backup with control files and spfiles? or do i have to do anything before taking hotbackup.
Thanks,
Praveen.

Yes you are fine. BTW, how many archive destinations did you configure.
Usually it is more than 1 on two different Disks.
TEST CASE:
NOARCHIVELOG Database
Change it ARCHIVELOG
Take a hot backup and try to restore/recover it.
STATUS=SUCCES
Can someone explain this to me please:-
Ensure DB in noarchivelog mode
SQL> archive log list
Database log mode No Archive Mode
SQL> startup mount;
SQL> alter database archivelog;
SQL> alter database open;
-- DID Not take a COLD BACKUP
-- Right after switching the mode I am taking hot backup
RMAN> backup incremental level=0 database ;
RMAN> backup archivelog all delete all input;
Nuke the datafiles
RMAN> SET DBID=1299283748;
RMAN> restore controlfile from autobackup;
run
set until logseq=79 ;
restore database;
recover database;
sql 'alter database open resetlogs';
Database is opened restored / recovered?
I totally agree we should take a cold backup right after switching the mode. Can someone explain the above though.
Message was edited by:
gopalora

Setting up KM reporsitories in DBFS mode

Similar Messages

Maybe you are looking for