Setting Up LG Wireless Adaptor to work with WRT54G router

My parents recently bought a High Def LG television and they got a wireless LG Adaptor for it (AN-WF100). My brother was able to insall it, but when we try to connect to the router, we get an error message saying that DHCP needs to be enabled. From what I can see when I go into the router settings, DHCP is enabled. We are pulling our hair out trying to figure out what settings we need on the router to make this work. We have tried both setting up the connection automatically and manually with the IP, Gateway, etc. I don't know what other information is needed, but I will provide further details if anyone has any ideas. We also have two applications set up under the Applications and Gaming tab (Nintendo DS and Wii). I don't know if that could be interfering with anything. Any help would be appreciated!
Solved!
Go to Solution.

LKKelly wrote:
I believe I have the same issue. New router, new LG 550 with WIFI Dongle. Router works with everything else but TV cannot connect. I'm receiving same message as Marie. HOw/where to I find and correct the WEP to WPA?
Thanks!
The WEP/WPA was set by the one who configured the router. Make sure you are entering the correct character and it is case sensitive.
Yesterday is history. Tomorrow is mystery. Today is a gift.

Similar Messages

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

Only the wireless is not working on WRT54G Router

I have been using this wireless router for a while now. We had a snow storm couple of days ago and since then the wireless portion of it is not working. I have Vonage and other power adapters connected through the other ports. All of them work fine except for the wireless. I have been trying on 2 laptops and the cell phone but had no luck even after doing a hard reset on the router. Any ideas would be greatly appreciated.

Snow storms do not affect wireless connections. We have close to a meter of snow on the ground. Temp -22 with windchill -30 does not affect my wireless connection on a WRT54G router. You may have had a power faillure or power surge that killed your router. Make sure your wireless is set to enable, Use a unique name for your network. Do not use Linksys as your network name. Enable the wireless switch on your laptop.
Greetings from Northern Ontario, Canada

How do i set up my wireless printer to work with my ipad 2

My ipad will not reconize my lexmark wireless printer what can I do

In UK BT generally use PPPoA authentication only so you will have to keep using the home hub as the main router. Put the Time Capsule.. TC.. in bridge mode. To do this go to the airport utility, on menu selection go to internet, and make sure it is set to ethernet for method of connection, and in connection sharing, select bridge. Then select update.. it will probably list some issues like password needing changing and access via wan etc .. almost all of which you can simply ignore.. as you are not using it in router mode.
The TC will save the setting and restart.. it will now exist as a wireless access point and switch on the network. The WAN is swapped to LAN, so there is no WAN port as such but it is still convenient to use WAN port marked <...> ethernet between home hub and the TC. Then setup wireless as you like. You can turn off the wireless in home hub, and just use the TC.. or use both, on different channels. That is no big problem. Set the security for the wireless is important and I would also manually set wireless channels and use different name for the 2.4ghz and 5ghz wireless. But just start and learn what you need to as you go along. Getting the basics working should be fairly easy. Some of the more complex stuff you just need to read carefully the instructions..
And read this site.
Carefully and until your eyes bleed. Almost everything you want to know is there already.
http://web.me.com/pondini/Time_Machine/FAQ.html
There are many areas he covers.
http://web.me.com/pondini/Time_Machine/Home.html

Setting up old time capsule to work with UVerse Router

I have a 3rd generation TC and need to connect to UVerse Router.I only need one
network. am using sys.7.5 on old iMac. 2006 I have Ethernet cable.
Please help. Thanks.

Suggest that you use the Mavericks Mac to set up the Time Capsule.
Power up the Time Capsule for a few minutes
Hold in the reset button on the back of the Time Capsule for 10 seconds and release
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect an Ethernet cable from one of the four LAN <--> ports on the Uverse router to the WAN "O" port on the Time Capsule
Click the WiFi icon at the top of the Mac's screen
Look for the listing of AirPort Base Station
Just below that, click on Time Capsule
The illustration below shows an AirPort Extreme. You will see Time Capsule
Clicking on Time Capsule will open up the setup wizard. It will take a minute to analyze the network, then display a window that looks like this, except that you will see a Time Capsule icon. Since the Time Capsule will run circles around the Uverse wireless, I I assume that you are planning to turn off the wireless on the Uverse router.
Network Name......Enter a short, simple name for the Time Capsule wireless network
Base Station.........Enter a short, simple name that you want to call the Time Capsule
Password..............Enter a password which will be used for the Network and Base Station
Verify.....................Enter the password again
Click Next
The setup utility will configure everything for you. When you see the message of Setup Complete, click Done
That's it.

Arris Cable Modem not working with WRT54G Router

I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them. Any help GREATLY appreciated!
Thanx!

ok man, good new and bad news. Good news, i know what ur goin through cause i have the exact same problem. Tried a new router too (wrt54g to no avail). Bad news i have no idea how to fix it. I've tried everything. Linksys tech support hasn't emailed back after their originaly fix which did nothing. Please PM me if you get any ideas. Ps Have you noticed that when the setup page times out you can't get an ip wirelessly. Also, my temporary fix is power cycling. Somtimes it works for a few days, or sometimes a few hours.
[Mod Note: Email address removed. Get in touch through PM for details.]
Message Edited by OnnagokorO on 09-25-2007 08:45 PM

How can i set up my iPod touch to work with a wireless keyboard?

How can I set up my iPod touch to work with my wireless Apple keyboard?

What Apple keyboard?The original Apple white keyboard with four batteries tonot work with any iPods
What model iPod? Only the 3G and later support BT keyboards
iOS: Third-party Bluetooth headsets, headphones, and keyboards
Wireless input devices: Bluetooth frequently asked questions

My Macbook wireless no longer works with my D-Link router

I purchased my Macbook in the summer of 2006 and have been using it wirelessly with a D-Link Airplus Xtreme G (DI-624) router. Just recently it stopped working with my router, although if I turn encryption off or try it in coffee shops, etc, the wireless still works just fine. I got into a long unhelpful email dialogue with D-Link tech support, and all I can guess is that maybe some recent OS X updates changed something...?
I've tried browsing the router on a wired connection and fiddling with various settings and renaming the network and resetting the password and deleting the key off of my keychain, etc, but nothing helps. I should be able to follow instructions if anyone has ideas about how to diagnose this, so I'd appreciate any help you can give me!
Macbook Mac OS X (10.4.9)

Welcome to the forum.
I had DI-624 for one year. It was no problems.
Have you try to reset to factory settings and try it again ?
And try the latest routers firmware update.

Can I get my HP F4500 wireless printer to work with my Ipad?

Can I get my HP F4500 Wireless Printer to work with my Ipad....It is an IOS 4.3.2

Philip-
I don't see a 4500 HP printer on the list of AirPrint printers, so you will most likely need an alternate way to print to it.
One way is to use an iPad App such as Print n Share. It has its own browser, mail, photo and text programs that can print to some non-AirPrint printers. I don't know if it can print from within other iPad Apps.
Another way is to use a computer to share the printer as AirPrint over WiFi, using a program like Printopia for the Macintosh. For a free solution, search the web for AirPrint Activator.
I recommend you try the free iPad App, HP iPrint Photo.
Fred

HT1552 Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

Hey do you know if the wireless mouse pad works with the ipad 2?

hey do you know if the wireless mouse pad works with the ipad 2?

There is no mouse or cursor used with iOS devices.

HT3310 what wireless headphones will work with a third generation ipod?

What wireless headphones will work with a third generation ipod classic?

The third generation iPod classic does not support BT.
If you meant the 3G iPod touch thenyou need a pair that supports:
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
iOS: Supported Bluetooth profiles

Does a wireless key board work with a macbook pro

does a wireless key board work with a macbook pro

what brand wireless keyboard? What version of OS X are you running (you have iOS 6.0.1 listed, but that is for iPhones and iPads) and what model macbook do you have?

Trouble getting Dlink DWL-G820 wireless bridge to work with wrt610n

I'm trying to get some dlink wireless bridges to work with wrt610n, but not having any luck. I left Wrt610n router with default "192.168.1.1" IP address and configured bridges accordingly with "192.168.1.xxx" adresses.
Wireless bridges not happy. Any ideas ? The bridges were working fine when i was using "192.168.0.xxx" ip addresses with wrt610n
Solved!
Go to Solution.

Well I'll give you full points for reading my question, but zero points for quality of answer. If it was that simple I would have done it.
Unfortunately circumstances have changed and I have both a 192.168.0.xxx LAN & 192.168.1.xxx LAN now and the DWL-G820 (Dlink) wireless bridges must be part of the 192.168.1.xxx LAN (WRT610N Linksys router). For some reason they won't work when I configure them to be part of a 192.168.1.xxx LAN.
I'm beginning to think it's a diabolical plot by either Linksys or Dlink to prevent each other's equipment from working together.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

Setting Up LG Wireless Adaptor to work with WRT54G router

Similar Messages

Maybe you are looking for