Setting up lifelog - logging in

I bought a Smart Band for my wife for Xmas and I am setting up Lifelog on her Moto G.
I have created a SNE account and have created a new lifelog account however all I get when logging in is the Welcome screen that says login successful. How do I then get in to see the data?
If I hit back, I go back to the sign in screen and on the welcome screen there are no buttons to move on.
I have tried uninstalling and reinstalling the app but get the same result.
Any ideas as to how I can get her past this to see the recorded data and analysis please?

Have you installed the Smartband software onto your phone https://play.google.com/store/apps/details?id=com.sonymobile.smartconnect.hostapp.ellis&hl=en_GB
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

How to set no archive log in MS SQL

Dear Gurus,
I'll already did the support package upgrade and need to run the SGEN.But before that I'll need to set the archive log in MS SQL 2005 database.
Kindly please help me,how to set "no archive log " in MS SQL .Then I can run the SGEN.After that how to revert back to "enable archive log mode".
All the posting told about the archive log with Oracle.
Thanks
/Shah

Hi Shah,
In MS SQL Server, Transaction log is used to write log files.
For eg., Intially if you allocate 10GB to the Tr.Log and can set the limit based on your requirement, say as 11GB. It means it wont grow beyond the point 11GB.
If you take a transactional log backup, the data present in the 10GB file is freed up, but the size of the file would remain same.
This can be truncated by shrinking the log file.
1. Open SQL Mgmt studio.
2. Right click on the DB(SID)> Tasks>Shrink-->Files.
3. Choose "Log" in the file type and "Log File Name" in the Filename column.
4. Shrink Action should be "Release Unused Space"
5. Then Click Ok. The unused space will be released.
The Transaction log can be switched off by changing the Recovery Model to "SIMPLE"
1. Click on the DB(SID)
2. Properties>Options>Recovery Model.
3. If the recovery model is set to Simple, the Transaction log wont be written.
Hope this would help you. Revert for any other clarification.
Regards,
Kamesh

I have a desktop osx 10.8.2 and I want to have a password set before i log on how do i set it and still see my iphoto pictures still flash when it is in sleep mode

I have a desktop osx 10.8.2 and I want to have a password set before i log on how do i set it and still see my iphoto pictures still flash when it is in sleep mode

Open the Users & Groups pane of System Preferences and disable automatic login, and then go into the Security & Privacy pane and set the computer not to log out after a period of inactivity.
(77781)

Set alert for log file free space

We need to set an alert in case the log file fills up to a certain level (ST04 - Space usage - Total log size / Free space)
Which parameter should we set in solman for this?
Thanks in advance

setup your CCMS agents to monitor the log files
http://help.sap.com/saphelp_nw04/helpdata/en/65/f3156d443e744abe15dbe14e4e32b5/content.htm

SAP PI 7.3 Single stack- Set tracing and logging

Hi experts
We have configured a SOAP to SOAP sync scenario in SAP PI 7.3 single stack(Java Only).
I have sent some test messages from WSNavigator to PI .
But when i checked messages in adapter engine, it is showing*"Unable to retrieve payload or you don't have sufficient authorization to view the content" I am able to monitor payloads of Async messages.
How can we set Logging and trace levels in Single stack PI? I couldn't find any options in RWB os NWA.
Thanks,
Dhanish

Hello Dhanish,
As it was stated by Kenneth in his post, if you would like to see payload of a synchronous message in Message Display Tool (e.g. from Runtime WorkBench), you should set value of property messaging.SyncMessageRemover.removeBody of J2EE service XPI Service: Messaging System to 'false'. Please note that this affects only synchronous messages in final states (DLVD and FAIL).
Regarding the second part of your question - logging. In PI 7.3, you can persist the message in Adapter Framework in two ways - stage it or log it. Staging allows you to edit/restart the message later from the stage where the message was persisted and is relevant for asynchronous messages; logging allows you to only display the logged message and is relevant for both synchronous and asynchronous messages. Please also note that staging affects performance of message processing more greatly than logging, extensive staging (e.g. staging on several processing stages) can even be a reason of performance degradation for processed messages, so if you only need to display details of the message on different processing steps in Adapter Framework, logging should be sufficient. Both staging and logging can be configured using properties xiadapter.stage.conf (for staging) and xiadapter.logger.conf (for logging) of J2EE service XPI Adapter: XI.
Regards,
Vadim

How to set up PopProxy* log file size ?

Dear All,
Does anybody know how to set up MMP PopProxy* log file size and rollovertime ?
./imsimta version
Sun Java(tm) System Messaging Server 7.0-3.01 64bit (built Dec 9 2008)
libimta.so 7.0-3.01 64bit (built 09:24:13, Dec 9 2008)
Steve

SteveHibox wrote:
Does anybody know how to set up MMP PopProxy* log file size and rollovertime ?Details on these settings are available here:
http://wikis.sun.com/display/CommSuite6U1/Communications+Suite+6+Update+1+What%27s+New#CommunicationsSuite6Update1What%27sNew-MMPLogging
Regards,
Shane.

Setting Markers in Log & Transfer window

Hi All
Anyone know a trick/plug-in that will enable me to set markers while I am setting my In's and Out's in the Log & Transfer Window before I 'Add Clip to Queue'? I would like to set markers indicating the interesting moments in the footage.
cheers
-j-

Only notes, no markers in log and transfer.

How to set up Query Logging in OBIEE 11g 11.1.1.6

Hi all,
I couldn't find the option for setting up the query logging for testing and debugging purpose. Could anyone plz help me in this ...
Regards,
Arun

Hi Arun,
For simplicity I'll direct you to a link http://obiee11gqna.blogspot.com.au/2011/04/obiee-11g-query-log-log-level.html
Richard

How to set more detail log level for http

Hi,
With Java Enterprise System 2003 I want to see when a user login to the Messenger Express in the http log. How could I set a log level so I can see this?
I do not know the the default log level for http and I would like to set a log level that show me more information
could this be the command?
configutil -o logfile.http.loglevel -v level Information

configutil -o logfile.http.loglevel -v Information
would be the correct command to set the log level to "information".
Other valid levels include, "debug", "notice" (this is the default), "warning".
You have t restart the webmail daemon to make this take effect.
stop-msg http; start-msg http

Question about set local redo log path in DG

i see doc says that:
If a fast recovery area was configured (with the DB_RECOVERY_FILE_DEST initialization parameter) and you have not explicitly configured a local archiving destination with the LOCATION attribute, Data Guard automatically uses the LOG_ARCHIVE_DEST_1 initialization parameter (if it has not already been set) as the default destination for local archiving.
and i active the function of fast recovery area,
SQL> show parameter DB_RECOVERY_FILE_DEST;
NAME TYPE VALUE
db_recovery_file_dest string /opt/app/oracle/flash_recovery
_area
db_recovery_file_dest_size big integer 2G
that's mean that i should set LOG_ARCHIVE_DEST_1 as DB_RECOVERY_FILE_DEST or i have not set LOG_ARCHIVE_DEST_1 ?

Technically you do not need to set LOG_ARCHIVE_DEST_1 because oracle will use it as the default setting for archiving the logs since you have DB_RECOVERY_FILE_DEST set, but it's good practice to explicitly set it so that's it's easy to look up.
alter system set log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST' scope=both sid='*';

Setting Partition Arguments (log flags) using FSCRIPT??????

Hi,
I can't succeed in setting parameters in FSCRIPT that require quotes (as
__-fl "(err:sh:*)"__:
1)
SetPartArgs VisionFrontEnd "-fl aFile(err:sh:*) +(trc:user9:*:*) -fm
(n:1024,x:800000,i:128)"
This sets the line, but the partition can't start.
2)
SetPartArgs VisionFrontEnd "-fl "aFile(err:sh:*)"
"+(trc:user9:*:*)" -fm "(n:1024,x:800000,i:128)"
(with or without '\' protecting)
This sets the line to 'empty', with an error saying that aFile(err:sh:*)
can't be found
How to set something on the parameter arguments list that contains log flags
?

While the user long and short name is a matter of convenience when logging in (the computer will "prefill" the user name at the server login window based on what account was used to log on to the local machine), what counts is the UID number of the account.
Most "home" user accounts end up with a "501" UID meaning that it is the first account created and it is an administrator account on the home machine.
What we have found is users are quite creative as to what they use for account names on their home machines and most times they are not compatible with the company standard of first initial last name we use for accounts.
So we let them do what they want but let them know the login and password of the network account so they receive access to network resources based on that account.

Why did I get three sets of the log in installation info? and none of the pass codes work?

I bought a brand new iMac in June so I qualified for the free upgrade. AFter I submitted my info I received three sets of the emails that are supposed to allow me to download and install. Howver, when I clickon them and try to use the log in and pass code information, the codes are too long and the files won't read them. Any info on this situation? I emailed the help support directly but have not heard

already tried that too I even went to the Apple store and asked about it and they said they heard people had similar problems but have not heard of a resolution......

Set up printers so users automatically have printer set up upon log on?? Help

I'm in a domain environment running windows server 2012 R2 and I want to set up a printer so that users will automatically have
this printer when logging into their account. My questions is how can I achieve this? Is this only possible through Group policy?

Hi,
I agree with Alan that both group policy and scripts can meet your requirement.
Just an additinal suggestion if you'd like to depoly the printer via group policy, you can check below links for some reference:
http://theintegrity.co.uk/2010/07/how-to-deploy-printers-with-group-policy-windows-server-2008-7-vista-xp/
https://technet.microsoft.com/en-us/library/cc754699.aspx
Hope it helps.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Setting Preferences / Error Log Max 100

How do set your preferences that the compile error log
doesn't stop at 100. On my compile i have 122 errors but i can't
even see the other 22 because by default the error screen only will
show 100. I looked everywhere in preferences and Googled it as well
but cannot find where you can set a higher limit than 100.
Thanks!

Sorry. I missed the part about you not running a printer. Then, that's normal CUPS behavior.
These are the most common log that you'll see under About this Mac=>More Infos:
access
console
error
install
mail
software update
system
If you ever have an application crash, then
crash reporter (stored in your user's Library/Logs.
Additionally, there are a lot of system logs. Launch the Console.app, File->Open Quickly and view the common logs in
~/Library/Logs/
/Library/Logs/
?var/logs/
Just don't delete any in the last two locations. The system manages those, especially when it does its maintenance tasks.

Setting up a Log File monitor to inactivity for a set amount of time

I have set up a number of log file monitors to alert when certain conditions apply, such as the word "ERROR" or "exception". Now I have a request to set up an alert if the log file has not changed for 20 minutes. I have been
searching and have not found any information on how or if this can be done. Anyone???
I am running Operations Manager 2012 SP1
The log files are simple text files.

Hi!
You could create a timer reset monitor that reads the log file every 19 minutes for a wildcard pattern (everything matches) and configure the successful search to healthy. Further, you've to configure the timer reset to 20 minutes and configure the
timer reset state to unhealthy (warning/critical).
Keep in mind that SCOM reads from the last line from the previous run every time. If your file rotates (based on a schedule or size) SCOM will not read the lines until the latest line is reached. For more information refer to
http://www.systemcenterrocks.com/2011/06/log-file-monitoring.html
HTH, Patrick
Please 'Propose/Mark as answer' if this post solved your problem. <br/> <br/> http://www.syliance.com | http://www.systemcenterrocks.com

Setting up lifelog - logging in

Similar Messages

Maybe you are looking for