Setting up minimum quantity at HEADER level at ARUN

Dear Experts,
We have a requirement in each order that there must be a minimum of 10 pc allocated before a delivery can take place.
I know for the ARUN setting that you can set up a release rule but this is using a percentage. Is there a way where I can set it up with no. of pieces instead?
Thanks very much and look forward to your reply.
Kind regards,
Jenny

Hi Chetan,
Sorry that I didn't explain it clear enough. What I'm trying to set up is not the minimum quantity that a material must be ordered.
What I would like is that e.g.:
Sales order:
Item 10 = 5 pc
Item 20 = 5 pc
Total pc of this order = 10 pc
At allocation run, if there are only enough stock of 5 pc for Item 10 and 4 pc for Item 20, giving a total of 9 pc of allocable quantit then since it is not meeting my minimum quantity of 10 pc, the result would bee that no allocation should be done (and no reservation is needed, so just drop the order).
At the moment, this set up is based on a percentage i.e. 80% fullfillment etc before a order can be allocated (under "Release Rule" setup). I would like to make it as a no. of pieces and not percentages.
Please advice if this is possible in SAP.
Many thanks,
Jenny

Similar Messages

PO Header level Descriptive Flexfields (DFF)

Hi,
We would like to define different sets of DFFs on PO Header level based on different nature of Purchase Orders. For example:
Local Purchase Order (Cotton)
Import Purchase Order (Cotton)
Local Purchase Order (Chemicals)
Service Purchase Order (Processing)
Service Purchase Order (Cleaning)
Service Purchase Order (I.Technology)
The point is to capture different sets of information based on different Categories of purchases.
Our problem is that the PO Headers DFF is shared between RFQ, Quote and PO. Secondly, if we leave it on users to select the Context Value, there is a chance of selecting a wrong value.
Any solutions or suggestions would be highly appreciated.
Regards,
-- Ahmed

On DFF definition form set global variable as a Reference Field eg. global.XX_DOCTYPE.
Set Context field values set BLANKET, STANDARD, CONTRACT, PLANNED etc.
Then on you can set global.XX_DOCTYPE values using form personalization, eg:
Tab Actions:
Object type: Global Variable
Target Object: XX_DOCTYPE
Property Name: VALUE
Value: ${item.po_headers.TYPE_LOOKUP_CODE.value}
This solution is very flexible. We use different context for combinations of Operating Unit and Document Type.
To set values of global.MY_VARIABLE we make concatenation of profile option ORG_ID value and document type value.
I believe this will work in your scenario.
Marcin

PO Tolerance limit at PO Header level.

Hi Firends,
Over Tolerance upto 15% of PO Quantity at Item Level, at the same time i need to restrict 5% of PO Quantity at header Level to be given in Service Orders and Material Purchase Orders.
In SAP we have option for tolerance for quantity at item level only,I awareon that. But its high reuirement from client side.
whenever i am try to do MIGO(Goods receipt) its consider my 5% tolerance at header level also,
Please suggest me.
Thanks.

For service Orders you can maintain overall limit at Item detail - Limits tab in PO. I doubt there is tolerance limit for service orders.
By maintaining vale at limits tab you can bill extra value and that will not be greater than the value maintained at Limits tab.
Hope this will be helpful.
Regards,
Rakesh

MIRO: Tolerance Limit At header Level

Hi all,
I would like to set the 10% tolerance limit at invoice Header level, instead of invoice item level.
When i try to set the tolerance limit (in PP) through OMR6 Transaction, it set the Tolerance at Item Level. Pls suggest the way, so that i can set the tolerance at Invoice Header level.
Regards,
S Anand

Hi,
create vendor specific tolerance and assign to vendor. you can maintain +/- differences here.
Materials Management > Logistics Invoice Verification> Incoming Invoice >Configure Vendor-specific Tolerances.
Maintain this tolerance group in vendor master payment transactions accounting screen, invoice verification tab.
now you are able to post invoice document within your tolerance limits.
e.g PO value is $1000, you can post invoice document $950 or $1050. the difference amounts will be posted in seperate G/L account.
Goto OBYC choose transaction key DIF. enter chart of accounts maintain G/L account.
Regards,
Chandra

How to delete a PO at header level - Restrict to a specific order type

Hi,
Deletetion of PO at header level is not recomended but still in my project they are using it to delete a particular PO type and should not allow to delete the other PO types. Recently Support Pack upgrade was done. After this activity deletion is not happening. Hope the relevent code got over writed with the original.
Here creation and change of PO will be done from a third party system through IDOC. Deletion of PO at header level should be possible only through IDOC.
Can some one give me the idea where(BAdI/Enhancement) we need to write the code to allow the deletion of PO of a particular type?
Regards,
Balaram Devineni

Hope you are referring to "setting of deletion indicator at header level of PO" (EKKO-LOEKZ = 'L'). Standard method CL_PO_HEADER_HANDLE_MM->PO_CANCEL may be helpful (you may have to integrate this with IDOC processing function module). Wiki post [Purchase Order Cancellation (Header) using ABAP Classes|http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseOrderCancellation%28Header%29usingABAPClasses] will be a good reference.

How to define multiple ship-to parties at contract header level

Hi Gurus,
Could anyone advise me if it's possible to have multiple ship-to parties at quantity contract header level?
Thank you!

Hi
It is not possible to have multiple ship to parties. Please explain your business requirement for this so that altenatives can be suggested by any member to fulfull your requirement.
Thanks,
Ravi

How can set the responsiblity name and operatingunit name at header level y

Dear all
Good Morning
i have to set the respname and org name at header level
i taken the item at page level userinfo it is coming the right side of the page i want to be set at header level only in left side top only...
is there any item style for this requiremt
Regards
Sreekanth

Dear Sumit
I designed one custom page in top header level i want to put Operating unit name and responsiblity name i mean in which responsiblity user working in that page...
i want to set these two properties
in process request i wrote the code
int orgid=pagecontext.orgid();
String respname = pageContext.getResponsibilityName();
i want to set these values to icorresponding items
these items i want to create at the top level of the header
which region which style.........
in page level i taken userinfo item it is coming right side of the header
i want to set these two items either left or right i want to set header level only
Regards
Sreekanth

Error in confirmation of Transfer orders at Header level (TC LRF2)

Hello All,
A transfer order has single item. It has got confirmed at the item level for the full quantity. The confirmation switchbox at item level is checked in by the system automatically. But in header level the switch box is not checked in.
While trying to confirm the Transfer order at header level, the error message shows that the Transfer order is already confirmed. But the Transfer order still exists in LRF2.
Thanks in Advance.
Regards,
Sasi.

Hi Marcos
Note 566995 is an old correction note, which is probably already implemented on your system but it describes the standard system design regarding confirmations posted in mass processing transactions:
When you enter an operation confirmation via the order info system or the mass processing the system now sets the confirmation type to 'Automatic final confirmation' as well as the indicator 'Post open reservations'. Thus the system automatically generates a final confirmation when you confirm the whole planned quantity and the operation receives status CNF (finally confirmed) instead of PCNF (partially confirmed).
System is designed that way because a mass processing transaction will be generally executed in background mode and a huge number of confirmations can be posted at the same time. Therefore, user will not be able to enter any value to the confirmation.
If you don't want this behaviour you could use the BAPI
BAPI_PRODORDCONF_CREATE_HDR to develop your own mass processing transaction to post confirmations.
BR
Caetano

Discount value not updating at contract header level

Dear Friends
I am facing problem of updating discount value at contract header level. The scenario is u2026. my client used to provide certain service to their customer. For that they maintain quantity contract & bill them as per billing plan. When customer avail three or more services they get 10% extra discount. Now the problem is after continue for some days if some customer wants to drop one item we are cancelling the line item by assigning proper cancellation procedure but the system is not reversing the 10% discount.
Example u2013
Contract valid for 1st Jan 2009 to 31st Dec 2010(Value for each service = 10)
(Total no of item-3)
(Discount-10%)
Here bill value for each month is 10x3-(30x0.10) =27
At the month of march 2009 customer decided to drop for one item so hence forth the bill value should be 10x2=20
But the system is calculating 10x2-(20x0.10)=18
We need to update the value at contract header level only to satisfy some CRM functionality.
Please suggest how to solve this issue

Hi,
If that is item condition then you can not change it at header level
check in M/06 make it at header level in change which can be made tab
Regards
Kailas Ugale

Net value in header level (sales order)

hi ,
I am creating a sales oder. I have enterned the material in item level with some quantity but the net value of the order at header level is not updating .. y???? help me please.

HI,
you can use following step to tace it:
1. go to header level "conditions" tab page & go for analysis there. you can get the results where & which value its picking there.
2. if its more then 1 line item at item level system will through the consoilidated vale at the header level not for a single line item.
Try this hope this will help u..Revert me if not solved...
Regards
Deepak

Discounts at sales order header level

Hi,
Is it possible to create discounts at header level,
if it is possible what are the setups & procedure to follow
and if there is any doc pls share it to [email protected]
Thanks in Advance
Raghu

Yes.
When you define the modifier, set the level to header.
See http://oracleebusinesssuite.wordpress.com/2007/09/12/how-to-setup-manual-modifier-for-special-charges/

Price Condition at the Header Level

Dear SAPfans,
Can we set the pricing procedure at the header level of sales order,
i would like to configure the rounding mechanism work on the header condition on the sales order, can it be done thru pricing procedure ?

Hi,
You can make condition type either header or item level.
header level coniditon type doesnt have access sequence and you generally enter the value manually.
You can use this condition type in Pricing procedure.
Check all about Condition type in V/06
Hope this will help.
Reward Point if helpful.
Thanks,
Raja

Rounding of sales tax at header level

HI
I want to roundoff tax at header level . we already using the tax rounding off at item level .
But new requirement is instead of Item level roundoff , they want the roundoff at header level
Plz provide solutions

Hi
U have 2 options
1. Conversion rule(OY04)
2. SPRO-Ref IMG-Global setting Data- Conversion Rule
or once u r maintaining the condition record for Tax value (FV11/ vK11/Vk19)
there u can find rounding rule.
thanks
mk

Adding Variant in Header Level in the Sales Order

Field "Card Verification Value" (CVV) is part of the Standard from Support Package SAPKH47028 onwards. But if you like you can use a variant for screen SAPMV45A4440 and set
field "Card Verif.Code" to invisible in this variant.
This is the reply from SAP after implementing the new support pack. Now there is an additional field in VA01 that I am trying to remove.
I can add the variant in Table Settings but that is on Item Level in the Sales Order (VA01). How do I do it in Header Level?

Hi,
Go to SHD0 ,write down the Transaction code , transaction variant then go to Tab " With Processing'.
Now you will be in T Code VA01 ,press enter and you will get all the variants maintained in Header Level.
Now you can activate / deactivate as per your requirement.
Best Regards,
Ankur

Tolerance for Invoice at header level

Hi,
In our business process we use unplanned delivery cost for freight. It is allowed upto 5% of purchase order value. If it is more than purchasing need to review with vendor.
In this scenario I want to set the tolerance limit in LIV when ever invoice value exceeds PO value by 5% system has to block the invoice.
I used tolerance key PP, but it will not work at header level. It is specific to each PO line item.
Please advice if there is any we can block the invoices when tolerance limit exceeds the PO value for total goods received.
Best Regards

Jaya,
Unfortunately there are no tolerance keys designed to work in the manner that you desire. All the standard tolerance keys work at the item level.
The only solution I can think of would be do some sort of validation on the unplanned delivery cost field via a user exit/BADI in MIRO.
Hope this helps {or probably not:)!}
H Narayan

Setting up minimum quantity at HEADER level at ARUN

Similar Messages

Maybe you are looking for