Setting up Multi server environment in Sql Server 2012 - Enlist Failed Error

I am trying to Configure the Master target server / Multi server environment in Sql Server 2012.
I changed :
- `MSXENCryptChannnelOptions`-->Changed from 2 to 0
- `AllowDownloadedJobsToMatchProxyName` - changed from 0 to 1 on the target
When I run the wizard I am getting below error
>MSX Enlist failed for Job Server 'MasterServerName'
>The enlist operation Failed(Reason:SQL Server Agent Error: Unable to connect to MSX 'MasterServerName'(Microsoft Sql Server, Error : 22026)
They both servers SQL Agents are running on the same windows service account.
Any Suggestions on how to fix this?
**Adding the Log:**
Enlist TSX Progress
- Create MSXOperator (Success)
Checking for an existing MSXOperator.
Updating existing MSXOperator.
Successfully updated MSXOperator.
- Make sure the Agent service for 'Test3' is running (Success)
The service 'SQLSERVERAGENT' is running.
- Ensure the agent startup account for 'Test4' has rights to login as a target server (Success)
Checking to see if the startup account for 'Test4' already exists.
Login exists on server.
Checking to see if login has rights to msdb.
Login has rights to msdb.
Checking to see if user is a member of the TargetServersRole.
User is a member of the TargetServersRole.
- Enlist 'Test4' into 'Test3' (Error)
Enlisting target server 'Test4' with master server 'Test3'.
Using new enlistment method.
Messages
MSX enlist failed for JobServer 'Test4'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The enlist operation failed (reason: SQLServerAgent Error: Unable to connect to MSX 'TEST3'.) (Microsoft SQL Server, Error: 22026)

hi SmilingLily,
you can try to run the SQL Agent under a domain account.

Similar Messages

How to create a dynamic multi-line function in SQL Server

I am attempting to create a Multi-Line Function in SQL Server that accepts a dynamic WHERE clause as a parameter. I need this so that the function can be as versatile as possible for the filter that needs to be applied. I am unfortunately getting an error
upon creation of the function. I don't know how to solve the problem. Can someone advise me?
SQL:
SET
ANSI_NULLSON
GO
SET
QUOTED_IDENTIFIERON
GO
-- =============================================
-- Author:
-- Create date: 2/3/2014
-- Description: This multiline function will accept a generic WHERE Clause and apply it to the query for return.
-- =============================================
CREATE
FUNCTIONTESTMULTILINEFUNCTION
@WHEREvarchar(1024)
,@CHANGEDDATEasdatetime
RETURNS
@TESTTABLE
TABLE
IDint
,REVint
AS
BEGIN
Declare@SQLSTRINGvarchar(4096)
SET@SQLSTRING=''
SET@SQLSTRING=@SQLSTRING+'SELECT
REVS.ID, REVS.Revision
FROM
Select distinct result.ID, Max(Rev) as ''''Revision''''
FROM
Select * from dbo.BugsAll
where
[Changed Date] < @CHANGEDDATE
) result
GROUP BY result.ID
) REVS
join dbo.BugsAll BA on (BA.ID=REVS.ID AND BA.REV=REVS.revision)'
IF
(@WHEREisnotnullOR@WHERE<>'')
BEGIN
SET@SQLSTRING=@SQLSTRING+'
WHERE '+@WHERE;
END
INSERT@TESTTABLE
EXEC
(@SQLSTRING)
RETURN
END
GO
ERROR:
Msg 443, Level 16, State 14, Procedure TESTMULTILINEFUNCTION, Line 44
Invalid use of a side-effecting operator 'INSERT EXEC' within a function.
Senior Test Lead -- Microsoft

>> Unfortunately I really need to form a dynamic query in a table valued function on the SQL SERVER. I have another tabled valued function that needs something returned as a table in order to further join the data. I am not allowed to use Stored
Procedures in that function. <<
You do know that real SQL programmers hate the proprietary nightmare of tabled valued functions? This is how you procedural programmers avoid learning set-oriented declarative and functional programming.
Your mindset wants to write to a scratch tape or disk file (aka “tabled valued function result table”) just like you did BASIC, FORTRAN or COBOL. QL programmers do not have to materialize their data. We can use VIEW or a drive table as well as a base table.
>> Plus, there are occasions where I don't want to pass in a field [sic: columns are not fields] parameter or need to change a parameter list such that I don't wish the table function to filter by a particular field [sic] or other setting. <<
What you want is a magical “Automobiles, Squids and Lady Gaga” function. An SQL programmer might write a complex VIEW then do simpler SELECTs off it.
>> My application pushes the WHERE clause from EXCEL to SQL to do the hard work as EXCEL is not the application in which I want to process the SQL statement and pass it via ODBC. I cannot run macros in Excel on the web.<<
This is a crazy language system. Usually we fetch data in SQL and then pass it to a math package, report writer, etc. We never keep logic (aka WHERE clauses) outside the database.
>> I am bummed about the fact that this feature doesn't work. It will up my server management costs to maintain unique tabular based functions based on WHERE clause query <<
So stop writing those “tabular based functions”, change your mindset and start learning SQL and do it right.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Server Sizing for SQL Server 2005

Hi Experts,
We are having a SQL Server 2005 Enterprise Edition, we are planning to do a sizing of the server.
Do we have any standard tool or criteria which can be used to come up with an assessment of the hardware enhancement which can be proposed for the server which host SQL server 2005.
Also is there any standard recommendation when setting up a production environment which would host SQL Server
Joji

http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/03/22/sql-server-installation-checklist.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

IDM 7.2 under Windows Server 2008 R2 (SQL Server ): Which NTW ? Which JVM ?

Hello,
We are installing IDM 7.2 under Windows Server 2008 R2 using the database SQL Server 2008 R2.
1/ Which NetWeaver should we use to install the Java Application Server (NTW 7.3 or NTW 7.2)?
Using install guides 7.2rev8, we tried NTW 7.3 but it comes with JVM 1.6 that isn't supported, according to the PAM.
Should we install the AS Java with NTW 7.2 that comes with JVM 1.5 (JVM 1.5 being supported)?
2/ Has someone installed IDM 7.2 under Windows Server 2008 R2 (SQL Server)?
If yes, which NTW was used (7.2 or 7.3)? Which JVM was used (1.5 or 1.6)? Which JDBC drivers (1.2 or 3)?
Thanks a lot for your replies,
Regards.

{quote)For the Java RE are you using 32 or 64 bytes ?{quote)
C:\Users\Administrator>java -version
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
{quote)Which JDBC driver do you use (1.2 or 3.0) ?{quote)
{quote)In the IDM Identity Center, for the dispatchers option tools, how do you fill it ?
We are using :
Path to java exe: E:\usr\sap\ID1\J00\exe\sapjvm_6\bin\java.exe{quote)
C:\Program Files\Java\jre6\bin\java.exe
{quote)Path to jvm.dll: E:\usr\sap\ID1\J00\j2ee\JSPM\sapjvm\jre\bin\server\jvm.dll{quote)
C:\Program Files\Java\jre6\bin\server\jvm.dll
{quote)JDBC driver jar: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
C:\sqljdbc\sqljdbc4.jar
{quote)JDBC driver names: xxxxxxxxx (can you write us what you use){quote)
com.microsoft.sqlserver.jdbc.SQLServerDriver
{quote)CLASSPATH extension: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
No Classpath specified

[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

Hi, I've seen questions about this error posted elsewhere but I'm not sure if the same issues applied.
I'm trying to connect to SQL Server from a VBA macro in excel. I've managed to do this with the code below where my query is return to cells in my active worksheet but for another query I want to run the data to be return is too large for Excel to handle
and so I'd like to save it as a .csv file but using the second example of my code I get the message "[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied". Since I have access to this database from the first example
of the code, I assume my conn.ConnectionString line of code is letting me down.
Can anyone help me please?
'Code to return data to worksheet'
Sub macro2()
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array(Array( _
"ODBC;DSN=SQLRA - OPENBET;UID=user1;Trusted_Connection=Yes;APP=Microsoft Office 2013;WSID=pdfdf3001;DATABASE=open;Network=DBMSS" _
), Array("OCN;Address=SQLRA_DB,55455;ApplicationIntent=READONLY;")), _
Destination:=Range("$BG$1")).QueryTable
.CommandText = Array( _
"select A.ev_oc_id, B.ev_mkt_id, A.ev_id, D.start_Time, Upper(Replace(A.[desc],'|','')) , A.result, COALESCE(A.sp_num, A.lp_num) , ", _
"COALESCE(A.sp_Den, A.lp_Den) from open.reporting.tevoc A, open.reporting.tevmkt B, open.reporting.tevocgrp C, open.reporting.tev D ", _
"where A.ev_mkt_id = B.ev_mkt_id and B.ev_oc_grp_id = C.ev_oc_grp_id and D.ev_id = A.ev_id and Upper(Replace(D.[desc],'|','')) = 'home' and upper(B.name) = '|today|' and D.ev_type_id in (264, 289) and D.ev_class_id = 49
and D.start>= '" & Year & "-" & Month & "-" & Day & "'" _
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = True
.RefreshPeriod = 0
.PreserveColumnInfo = True
.ListObject.DisplayName = "Table_Query_from_SQLRA___OPEN_1"
.Refresh BackgroundQuery:=False
End With
End Sub
'Code that produces error'
Sub macro1()
Dim conn As ADODB.Connection
Set conn = New ADODB.Connection
Dim testSQL As String
Dim qd As DAO.QueryDef
Dim openbetdb As Database
conn.ConnectionString = "driver={SQL Server}; server= sqlra_db;uid=user1;APP=Microsoft Office 2013;WSID=pdfdf3001;database=openbet"
conn.Open
testSQL = "SELECT * FROM open.reporting.TevType where ev_class_id = 49 and ev_type_id in(289,330,518,13492);"
Set qd = Db.CreateQueryDef("tmpExport", testSQL)
DoCmd.TransferText acExportDelim, , "tmpExport", "C:\\export.csv"
End Sub

Hello,
Are you connect to remote SQL Server? If so,
please make sure the target SQL Server is running and is listening on appropriate protocols. Please take a look at the following article about general steps to troubleshoot
SQL connectivity issues:
http://blogs.msdn.com/b/sql_protocols/archive/2008/04/30/steps-to-troubleshoot-connectivity-issues.aspx
Regards,
Elvis Long
TechNet Community Support

Oracle Linked Server problem in SQL Server

I'm using the MS OLE DB Provider for Oracle in my SQL Server linking an Oracle 9i server to the SQL Server 2000 server. I get the following error when I try to execute a query thru the SQL Server Query Analyzer:
[OLE/DB Provider 'MSDAORA' IOpenRowset::OpenRowset returned 0x80004005: ]
I can however define an ODBC connection and use DTS to get to the Oracle database just fine from the SQL Server machine. I need the linked server query to work though since I'll need it for a new application.
Any help is very much appreciated.
Thanks.
Anja

I guess I'll answer my own question. I found that the setting SQL Query Analyzer was set to "Implicit Transactions" in the current connection properties. When I turned that off the query ran fine

Moving from SQL server 2005 to SQL server 2008 ... for a MS/SQL newbie.

Hello,
I am in charge of moving an existing SAP NW BI (SPS20) from a MS SQL Server 2005 database on Windows Server 2003 (x864/64 bit) Platform to a MS SQL Server 2008 database/Windows Server 2008 Platform (x64/64 bit).
The SID of the SAP system will remain the same.
The thing is that I have always worrked so far on Oracle/Unix environements, windows/MSSQL is an entire new world for me,
so I am quite worried.
I have read many sap notes/installation guides/forum posts regarding this operation, I will describe here my understanding
of the techinical operations that I will need to perfrom.
Could you correct me if I am wrong, as well as give me your comments ?
1/ I will need to perform an SQL server database copy within a homogeneous system copy.
2/First ,I'll have to install on the target environnement the SQL server 2008 database. I'll have to install the SQL Server Database Software with SQL4SAP (no need to install the database server software manually, right ?). Afterwards, I'll install on the target environnent, SAP Netweaver 7.0 SR3 with a modified Instalaltion Master DVD.
3/ On the source environement, I'll perfrom a database backup of the SQL Server 2005 system and restore the database on the target environement. since I choose to perfrom a restore of the database , there is no need to follow all the steps described in sap note 151603 :determine the file structure of the source database, create the directory structure for the target database, etc ...
4/ Once the restoration is finished, I use SAPINST and finish the homogeneous copy : >additional sofware->system copy>target system->central system --> Based on AS Abap --central installation
Your comments are welcome.
Thank you for your attention
Best Regards.
Raoul

Hi Raoul,
you also need a modified Kernel DVD for the installation on SQL 2008 (see SAP Note 1152240).
And don't forget to install and patch the Visual Studio c++ Runtime (also described in that note).
I also would recommend to restore the backup and then install SAP NW 7.0 SR3 and use the restored SQL 2008 database.
So the basic steps are:
1. Perform backup and restore to SQL 2008
1.1 Install SQL 2008 with SQL4SAP
1.2 Backup old database
1.3. Restore backup on SQL 2008
2. Install VC runtime on Win 2008
3. Create modified Kernel DVD
4. Create modified Master DVD
5. Perform system copy target installaton with - additional sofware->system copy>target system--->central system --> Based on AS Abap --central installation and use the SQL 2008 database
You could also use SQL Server 2008 R2 which was release last month.
Please also check Note 1476928
Best,
Sebastian Dusch

HOM: MS SQL Server 2000 - MS SQL Server 2005 [sp sap_use_var_MAX]

Hi guys,
Procedure
Homogeneous System Copy on SQL Server
Source Platform
Windows 2003 Server x86
SQL Server 2000 SP4
SQL_Latin1_General_CP850_BIN2
SAP R/3 4.7 x200
SAP Kernel 6.40 Patch 347 x86 (Sep 10 2010)
SAP_BASIS 620 Patch 69
Target Platform
Windows 2008 Server x64
SQL Server 2005 SP3
SQL_Latin1_General_CP850_BIN2
SAP R/3 4.7 x200
SAP Kernel 6.40 Patch 347 x64 (Sep 10 2010)
SAP_BASIS 620 Patch 69
Symptom
When running STM (SAP Tools for SQL Server) on the target server I get the following error:
- Errors when executing sql command: (Microsoft)(ODBC SQL Server Driver)(SQL Server)Could not find stored procedure u2018sap_use_var_MAXu2019.
Further Analysis
I'm able to start the SAP system.
Tx SICK returns the following:
- Wrong long datatypes. Perform SQL Server after upgrade steps. Please see note 126973
Troubleshooting
Note 126973 - SICK messages with MS SQL Server
Solution:
Proceed as described in Note 1291861
Note 1291861 - SICK message: Wrong long datatypes
2. If the problem occurred following a system copy from SQL Server 2000 to SQL Server 2005 or later then execute the following statements:
setuser 'sid'
exec sap_use_var_MAX
Where 'sid' is the SAPSID of your system in lower case.
setuser 'dev'
exec sap_use_var_MAX
Msg 2812, Level 16, State 62, Line 2
Could not find stored procedure 'sap_use_var_MAX'.
Request
I'm thinking if any one of you is able to access an SAP system on SQL Server (2005 or other) with the above mentioned stored procedure present you could scipt it to a txt file and post it here in order for me to create it manually on my system.
I've checked several SAP Notes on this subject and none of them explains how to create this store procedure from scratch, they all just assume it's already there and tell you to execute it.
Thank you.
Bruno Pereira

I was able to solve this issue just now the following way:
- A friend of mine scripted it to a file which I then used to create the sap_use_var_MAX on the target database.
Here is a copy of that file:
USE [<SID>]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create proc [<sid>].[sap_use_var_MAX] as
begin
declare @tabname sysname
declare @colname sysname
declare @datatype sysname
declare @nullflag nvarchar(1)
declare @cmd nvarchar(1024)
declare @n_altered int
declare c cursor for
    select t.TABLE_NAME,c.COLUMN_NAME,c.DATA_TYPE,
              nullflag = substring(c.IS_NULLABLE,1,1)
      from INFORMATION_SCHEMA.COLUMNS c,
           INFORMATION_SCHEMA.TABLES t
      where c.TABLE_NAME = t.TABLE_NAME AND
            c.TABLE_SCHEMA = t.TABLE_SCHEMA AND
            t.TABLE_TYPE like '%TABLE%' AND
            c.TABLE_SCHEMA = schema_name() AND
            c.DATA_TYPE IN ('text','ntext','image')
      order by t.TABLE_NAME,c.COLUMN_NAME
open c
set @n_altered = 0
fetch next from c into @tabname,@colname,@datatype,@nullflag
while (@@fetch_status <> -1)
begin
    if (@@fetch_status <> -2)
    begin
      set @cmd = N'alter table [' + @tabname +
                  N'] alter column [' + @colname +
                  N'] '
      if @datatype = N'text'
        set @cmd = @cmd + N'varchar(MAX)'
      else if @datatype = N'ntext'
        set @cmd = @cmd + N'nvarchar(MAX)'
      else
        set @cmd = @cmd + N'varbinary(MAX)'
      if @nullflag = N'N'
          set @cmd = @cmd + ' NOT NULL'
      else
          set @cmd = @cmd + ' NULL'
      -- print @cmd
      exec( @cmd )
      set @n_altered = @n_altered + 1
    end
    fetch next from c into @tabname,@colname,@datatype,@nullflag
end
close c
deallocate c
select convert(varchar,@n_altered) + N' columns were altered'
end -- sap_use_var_MAX
Mind you, you'll have to change <SID> and <sid> acoordingly, considering also if your db is dbo schema or sid schema owned!
Thank you for your help nonetheless!
Bruno Pereira

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Upgrade from SQL Server 2005 to SQL Server Express 2014 Enterprise

I was just wondering if it is possible to upgrade from SQL Server 2005 to SQL Server Express or will I have to build the environment and then migrate the database?
Thanks for any help

Hi Lance_Romance,
As others’ posts, you don’t have to build new environment and then migrate databases between SQL Server instances, you can use the in-place upgrade strategy to upgrade from SQL Server 2005 to SQL Server 2014 .Please note that SQL Server 2005 SP4 is required
in this case.
Before upgrading , I recommend you to use
upgrade advisor, it can help to analyze your existing SQL Server deployment and inform you of issues that need to be addressed. In addition, please perform a full server backup prior to performing the in-place upgrade, which will be an important way
to revert your SQL Server to its previous state if the upgrade does not go as planned. For more details, please review this blog:
Upgrading to SQL Server 2014: A Dozen Things to Check.
Thanks,
Lydia Zhang

Moving sql server 2000 to sql server 2014

Moving sql server 2000 to sql server 2014. Could someone please give me steps to move everything from sql 2000 one server to sql 2014. I have 2 instance on sql 2000. 8 databases on each of them. On both instances we have store procedure and jobs.

i think your SQL Server 2000 is hosted on old Windows server version so based on that you should prepare new environment for SQL Server 2014 from Win Server 2012 Sp1 and SQL Server 2014 and build your clusters then start your Migration from Old Servers to
new servers and here below is 10 configurations outlines that you should look after carefully for any DB consolidation or migration from a server to a server and indeed they represent unique potentials for your DB Consolidation /migration service that
can leverage distinctly your service quality and shape you very well in front of your customers:
1- Backup DBs and restore DBs with ZERO down time and ZERO data loss in the same time …Awesome …!
2- Cloning all DB special features that are not covered by backups and restores such as :
RCSI (Read committed snapshot isolation level using row versioning)
Service brokers
Encryption keys and certificates
3- Cloning identically all SQL logins with their mapped DB users including their passwords (if SQL authenticated logins ) and privileges on both server and DB levels .
4- Copying .rdl and .rds files between different versions of reporting services where backup and restore reportserver and reportservertemp DBs is not an option
5- Cloning all special Jobs like certain business jobs configured to perform some business stuff .
6- Cloning all mail profiles with their mail accounts
7- Cloning all Linked server + Aliases might be used inside old DB servers
8- Cloning some server configurations like CLR ,CPU parallelism, Replication size , Network packet size , optimize for ad hoc workloads
9- Cloning all Replications configurations for publishers and subscribers
10- Cloning all DTC configurations for both local and clustered DTC services
Follow the below links to know the steps by the scripts:
http://sqlserver-performance-tuning.net/?p=5262
http://sqlserver-performance-tuning.net/?p=5359
http://sqlserver-performance-tuning.net/?p=5398
http://sqlserver-performance-tuning.net/?p=5415
http://sqlserver-performance-tuning.net/?p=5458
Mustafa EL-Masry
Principle Database Administrator & DB Analyst
SQL Server MCTS-MCITP
M| +966 54 399 0968
MostafaElmasry.Wordpress.com

Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4

Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])

Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!

Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Setting up Multi server environment in Sql Server 2012 - Enlist Failed Error

Similar Messages

Maybe you are looking for