Setting up multiple FTP locations for scheduled reports

I have tried to set up a new Crystal Report that would FTP the report to port 2033.
I set up 5 new Job servers with the new FTP data, each time I schedule the report it auto reverts back to port 21, I have checked the requested server and the server is set to 1 on the new servers that is set to port 2033.
I continue to receive a failure with a error of
Title:      BCS FollettEDI
Document Type:      Text
Status      Failed
External Destination:      FTP the instance with the filename: "" to the folder: "./DropOff" on host: "edigis.follett.com " .
Owner:      Administrator
Server Used:      DRISQL.JobServerFollettEDI
PID:      5364
Folder Path:      User Folders/Administrator/BCS/Follett - EDI/
Remote Instance:      No
Creation Time:      5/24/2011 12:27 PM
Expiry:      5/24/2021 12:27 PM
Start Time:      5/24/2011 12:27 PM
End Time:      5/24/2011 12:27 PM
Printer:      None
Formats:      Text
Parameters:      No Parameters
Error Message:      connection error. [CrystalEnterprise.Ftp]: [unknown error!]
If anyone could help, PLEASE and THANK YOU
Craig Spehar

You could define one separate reports-server for each user, and configure the path for it in the reportsserver's conf-file. In the formsweb.cfg, point to a different env-file for each user, in that env-file, place thename of the users reports-server. retrieve it using TOOL_ENV.GETVAR and use it in the call of your report.

Similar Messages

Multiple FTP locations on different drives in Server

I've been working to set up an older Power Mac as a location to back-up my ReadyNAS. The ReadyNAS has an automated function for FTP back-up to an FTP location on my network.
I've put two 1.5TB drives in the OS X server. I have about 1.7TB of data on the ReadyNAS. I had hoped to backup about half of that to each of the drives in the Power Mac Server.
However, I can't figure out how to set up 2 FTP Share Point locations, one on each of the drives, so that I can set the ReadyNAS to back up some of its directories to one drive and other directories to the other.
The data is actually mostly static. Once I do the initial backup the incremental ones (what's changed) will be relatively small.
Does anyone know how to set up multiple FTP share points on different OS X Server drives?
Thank you in advance for any enlightenment.

Thank you for the quick response. My problem is how to have the system "know" which backup job it is and switch (without user intervention) to the right Share Point and drive.
I have 6 shares on the NAS with ~760GB and would like to have those backed up to Drive 1. Then when the job starts with the 1 share with 800GB I want that to back up to Drive 2.
That's what I can't figure out how to do automatically. It seems like you have to manually go in and change the Share Point and then manually start the job.
Is there a way to do that in OS X Server without me getting involved?
Thanks again,
BflatBlues

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

Multiple Sales locations for a Business Partner

I need to have multiple sales locations for the same Business Partner, is it possible within SAP Business one?
The Business Partner have several locations of sales and we need to delivers & have a service level with that locations.
Thanks for help,

Thanks for your reply.
I need the have each LOS ( Location of sale or location of delivery) of Business Partner because we will deliver items for the LOS and not for BP.
As we also need to control (serial numbers) items & services ( field management) I also need to have the LOS as BP.
As example:
BP name AAA have 30 LOS.
BP AAA bought 2000 items.
BP AAA ask us to old theses items in warehouse.
BP AAA request to delivery a x quantity in LOS 1, 2,3,4,...
The invoice went to BP AAA, but the deliveries will be to each LOS of BP AAA.
As I said we need to have the field services working side-by-side with serials numbers and services for each LOS of our BP AAA.
So, we have subcustomers from big customer BP AAA.
Do we have any way of having all subcustomers(LOS) as BP, along with the real customer AAA?
Thanks in advance,

How to Set Up E-Mail (Email) for Financial Reporting ?

Does someone could help me explaining in which configuration file is set the e-mail server for Financial Reporting or Workspace ? I am using EPM 11.1.2.1 version and open the FR reports inside the Workspace.
Thanks,
Alvaro

You could do the email setup through the configuration utility by selecting the Foundation ->Configure Common settings.

Can I use Webservices SDK for scheduling Reports?

Hi All,
I have a requirement to use Webservices SDK. The process flow is explained as below:-
PeopleSoft calls Java component which schedules the BO Reports by calling BO program Objects. I was using BOE SDK before. But SAP advised to move to Webservices SDK as to remove CORBA connection issues.
Can I use Webservices SDK for scheduling Reports?
Please update.
Thanks,
Anu

Its possible to schedule reports from web services SDK. Its stated in the Web services SDK Doc.

How to set up Multiple Playback tracks for a "Set" or "Concert"?

Hey Gang...so I'm venturing into MS2(2.2.1) now and have a feeling I just need some help understanding the building blocks. Here is what I'm trying to do:
I want to set up a concert for solo gigs where I basically will perform saxophone along with backing tracks (audio). On some tunes I use an EWI, and on others I use different saxes (EQed diff, with diff EFX, so on). SO, I want to create "patches" for each song, and have that "patch" contain the midi sound (for EWI) or settings for the diff saxes.
Here is the important part: I also need each individual "patch" to playback a different back-track.
I have started all this with the tune "Summer Madness", and here is the problem: When I switch to a new "patch", I still get Summer Madness. If I load a different BT into playback, that track is then "universal" through ALL "patches". It must be something simple, but what am I missing? Do I have to create multiple channel strips with the playback plugin loaded (seems awefully designed, and a waste of resources?) and assign DIFFERENT controller buttons (or whatever) to playback different tracks? (again, aweful, and a complete waste of midi controller real estate).
If I have explained all that poorly, my appologies. I just am hoping MS2 has a way of "auto-loading" a new BT everytime I switch to a new "patch". I cannot seem to figure this one out. Any help is greatly appreciated!
Thanks.

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

How to set up multiple log4j configurations for multiple WAR packages?

hi all,
the EAR that i am trying to deploy has multiple WARs.
I need to configure separate loggers for each these WARs.
Could any of experts can help me out.

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

"database logon" option for schedule report

When scheduling a report,
Crystal report has the "database logon" option in "shcedule" property page.
But I can't find the "database logon" option for webi report or deski report.
Is this by design.

Hi Tina,
We do not have data base logon option while scheduling the report.
I am not sure what is the significance of it in Crystal but in Webi or deski report we do not need it. We have connections for every universe/report and that has these database log on credential in it. Based on it reports get refresh and run.
Thanks

Multiple db connections for one report

Hi all,
I am using Oracle Reports 10g R2. Could someone tell me if Oracle Reports supports multiple database connections for one rdf file, like this (using servlet)
http://your_web_server:port_num/reports/rwservlet?server=server_name&report=myreport.rdf& userid1=username/password@my_db1&userid2=username/password@my_db2 &desformat=pdf&destype=cache
I am asking this question because my report needs data from two separate Oracle databases.
Edited by: user12239004 on Apr 27, 2010 2:14 AM

No, you can only have one login.
However, this is simple to resolve by creating a database link in one database to the other database.

Reg: Multiple authorization level for HR Report

Dear Experts,
I have a customized report for the payroll area, I need to have authorization for this report.
The requirement is as below
For Ex: i have 5 payroll areas, 1000 personnel numbers, the multiple users and one customized report.
The user has access for 2 payroll areas, the user should select the personnel numbers which has access to the same payroll area.
The same user should not be authorized to access the other payroll areas and the personnel numbers.
One customized report is being executed by the mulitple users, one user will have access only for one payroll area and he needs to select the personnel area for which payroll area he has access.
Similar concepts follows for the other users.
Can anyone help me to achieve this authorization concept. It would be grateful.
Awaiting for your suggestions.
Thanks in advance.
Regards,
Abdur Rafique

hi,
You can use sy-uname. Such that if some other user enters you can pop up the message you are not authorized.
Regards,
Pawan.

Multiple storage locations for single material - ECC 6.0

Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjay

hello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil

SCD - source sets where multiple changes exist for the same natural key

I am using the Oracle SCD type2 method (end date old record and insert the new record) which was working fine until my source set contained multiple changes for the same natural key. Does anyone know of a way to handle this?
Thanks

Hello,
I think, the way of handling multiply changes of NK is totally depend on business requirements for your project.
There could be number of approaches for this. For example:
- all changes but the last are considered active during one day, going subsequently right after previously existed SCD record;
- all changes but the last are considered active depending on its occurrence within fact data (as far as you consider NK change based on some attribute set - probably some of attributes show themselves within fact data)
- etc.
So, make an agreement upon this with your customer and ETL design decision will follow immediately.
Sergey

Setting builtin Weather app location for all domian users

I am trying to force a home location for the built-in weather app using Group Policy.
I have tried to trace these settings using Process Explorer but I cant see where they are written.
How would I go about forcing this for all users?

I've also discovered this same path.
Although I wish I would have found this thread sooner it would have saved me A LOT of time figuring out the directory where the settings are stored.
I've looked into the PersonalDataCache folder and found 3 files typically. The important one being
PersonalData_weather.file which seems to be something akin to an XML file. It contains entries for example below:
{"GeoCoordinates":{"Latitude":33.4633598327637,"Longitude":-111.984771728516,"Altitude":0,"Version":0},"City":"Phoenix","State":"AZ","CountryRegion":"United
States","LocationType":1,"LocationTypeId":"Phoenix, AZ, United States","ISOCode":"US","Version":0}
{"GeoCoordinates":{"Latitude":32.778148651123,"Longitude":-96.7954025268555,"Altitude":0,"Version":0},"City":"Dallas","State":"TX","CountryRegion":"United
States","LocationType":1,"LocationTypeId":"Dallas, TX, United States","ISOCode":"US","Version":0}
After modifying the file and attempting to copy it back into a users profile however it never works. I'd be curious how you were able to actually get NEW users logging in for the first time to properly have the weather location that you want.
I'd also be curious if 2 months into this setting change if it is still working for you?
Also, I'd be curious to know if you are using a GPO to turn on the location services. Or if you have managed to figure out a way to get the weather app to stop asking users if it can use their location the first time they open the app.

Setting up multiple billing blocks for a CMR - Credit Memo Request

I am trying to set a billing block for a credit memo request. The item category in VOV7 configuration only allows you to set one. I need to be able to set any of them and for it to block. If we do not use one; the system allows the credit memo to get created. If we choose the one that we configured in VOV7 it allows us to only use that one. The client needs to be able to select any billing block from the drop down when creating a credit memo request in VA01 instead of just one specific one. Is this possible? If so, where would I do this?

Surprising! when a billing block is applied in the sales document, then the system will NOT allow to create the billing document(in your case credit memo). Can you check in t.code OVV3, the billing blocks are assigned to billing types? After assigning, create a new document and test. The path is SPRO->Sales and distribution -> billing->billing documents ->define blocking reasons for billing->assign blocking reasons to billing types.
Regards,

Setting up multiple FTP locations for scheduled reports

Similar Messages

Maybe you are looking for