Setting up Network Address Server Settings (Static IP)

To be abundantly clear, I do not want to change my Internet Connection Type - its dynamic and will stay that way. I'm not paying my ISP (Time Warner Cable - RoadRunner in NYC) for a static IP address.
I am changing my network address server settigns to disable DHCP, and hopefully assign static IPs to the various comps/devices in my home network. For various reasons (mostly security/ease of use) it would be handy to know my desktop/media center is always (for example) 192.168.1.101, my laptop is always 192.168.1.102, xbox is always...etc etc.
I have DHCP under network address server settings, and attempted to change TCP/IP protocol of my adapters in the comps to static IP (instead of obtain one automatically). I followed the WRT54G router manual whilst doing this. So I inputted the IP for each comp I want to use, 255.255.255.0 for a subnet mask, and the default gateway (in the example, it would be 192.168.1.1, though I want to use a different internal IP address for my network as a security precaution). Now it also wants primary and alternate DNS. TimeWarner won't tell me this information. They say they tell my router it (since its DHCP) and it changes. So...if I want static IP addresses for the devices in my network, I need my router to have a static ip address externally? that means I pay more. Or have I got it wrong? Please advise. I know I could check the router's status page and grab the two DNS servers its currently using, but then when my router's IP and DNSs change due to the internet connection being dynamic, I'd have to go change all the devices in the network (PITA!!). Thank you for your help.

Most ISPs don't actually change their DNSs only the internet IP adress... you can try grabbing those DNS 1 & 2 and set it to your PC. try checking if those will change for verification.
If not, then for primary DNS, use 192.168.1.1 (equivalent for your router so whatever the DNS your router will use, it will just route it. but it doesnt always work), for the alternate DNS: you can use 4.2.2.1 or 4.2.2.2
"a helping hand in a community makes the world a universe"

Similar Messages

Content Server Settings not working (for PPM)

Hi,
We are on PPM5.0.
We have set up the Content Server settings according to the PPM
configuration guide.
We, however, still see the documents (uploaded in the project) showing
up on the PPM Server.
We checked the entries in table CFF_CONT (in the PPM server), and see
the contents updating when a document is uploaded. This makes us
conclude that the documents are still not being stored on the Content
Server.
Any switch/flag that needs to be set/reset in the WAS and/or Content Server that'll help??
Or anything else...???
Thanks.

Earl Powers BSR2751547 Thank you all. your suggestions really helped.

Error:Network address DEFAULT of your computer is not maintained

Hi Experts,
I am creating Document InfoRecord using BAPI :BAPI_DOCUMENT_CREATE from a report program, when i execute it, BAPI is
returning a Error: *Network address DEFAULT of your computer is not maintained.* Can any one suggets on this, or i need to do
any setting for Network Address ?
Pleese respond ASAP.
Thanks and Regards,
ALSDIN

This sounds similar to an issue discussed here
http://www.sapfans.com/forums/viewtopic.php?f=23&t=284434

How to set VPN server with static IP without DHCP on

I set up a new Mac mini server with OS X 10.9.1 and Server App 3.0.1
My ISP gave me a static bublic IP address.
I have on:
- web server
- mail server
- DNS server
without using DHCP, but now i want to set up L2TP/IPSec VPN server and it requires that i give start IP address of the VPN server.
Can i use VPN server w/out DHCP server on?
If yes, how?
If not, when i turn on the DHCP server, what i have to do with web, mail servers?

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.

Setting up a plain network-account server

To simplify a process I need to get done quickly, but have no knowledge of, I am asking for the support of the helpful users here in the discussions.
The end product I need is a 10.5 server (already installed and not set up yet) to host network user accounts to a number of 10.5 client computers (set up with one local admin account each).
Each user account just needs to be a standard account and I need the clients to show a list of available network accounts, with each account having a fully functional home folder on the server.
The server itself needs to do nothing else but this function. The server and the clients already exist on a fully set up network with each client machine having only to set up a specific IP address, router IP, and DNS server in it's network preferences to join the network. The server can join the network the same way.
What I need to know is what is the best way to set up the server to only provide the network accounts and no other service? Consider the server can be wiped and set up again if anything goes wrong, any links to online literature or a step by step guide posted here would be greatly appreciated.

To simplify a process I need to get done quickly, but have no knowledge of, I am asking for the support of the helpful users here in the discussions.
The end product I need is a 10.5 server (already installed and not set up yet) to host network user accounts to a number of 10.5 client computers (set up with one local admin account each).
Each user account just needs to be a standard account and I need the clients to show a list of available network accounts, with each account having a fully functional home folder on the server.
The server itself needs to do nothing else but this function. The server and the clients already exist on a fully set up network with each client machine having only to set up a specific IP address, router IP, and DNS server in it's network preferences to join the network. The server can join the network the same way.
What I need to know is what is the best way to set up the server to only provide the network accounts and no other service? Consider the server can be wiped and set up again if anything goes wrong, any links to online literature or a step by step guide posted here would be greatly appreciated.

The server network address can not be reached or does not exist

Hi all
    When i am trying to configure Mirroring .i am getting the below error.
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
I post the complete error message below ,which is in red
TITLE: Database Properties
An error occurred while starting mirroring.
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
BUTTONS:
OK

Hi,
I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
Here is the SQL I used to setup the mirroring.
* Principal DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
BACKUP DATABASE TEST
    TO DISK = 'C:\full-backup.bak'
    WITH FORMAT
BACKUP LOG TEST
    TO DISK = 'C:\log.bak'
ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
* Mirroring DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
RESTORE DATABASE TEST
    FROM DISK = 'C:\full-backup.bak'
    WITH NORECOVERY
RESTORE LOG TEST
    FROM DISK = 'C:\log.bak'
    WITH FILE=1, NORECOVERY
ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
The last statement on the principal server gives me the following error :
Msg 1418, Level 16, State 1, Line 1
The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
TCP    0.0.0.0:5022           0.0.0.0:0              LISTENING       1244 [sqlservr.exe]
TCP    10.1.1.140:5022       10.1.1.110:1223       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1226       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1216       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1218       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1225       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1222       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1221       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1224       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1219       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1220       TIME_WAIT       0
Is it normal so many ports get opened?
Any help would be greatly appreciated (as this drives me crazy :-( )
Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator.

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Change network address of acs server

Put in a new backup ACS server and the senior guy put in temp host address. Now
need to change the temp host address to its permanent address but need a little clarification. Do you just change it in the Windows srvr 2003 tcp/ip stack or do you need to change it also inside the CSACS app?? Can't find it in the manuals easily.

Yes you'll need to change ACS config. Just locate the AAA Server entry for the server (in Network Config) and set the ip address to the new value.
Or you can always just enter the server name instead in case the address changes again.
tip: in network config you can enter DNS names instead of ip addresses for devices & aaa servers.

The dreaded: The network address is invalid error - SQL 2014 Cluster on Server 2012 R2

Trying to setup an SQL 2014 Failover cluster on Windows Server 2012 R2 (two nodes). Every time I get to the assign a SQL server Network Name piece of the setup I get the following error message:
The given network name is unusable because there was a failure trying to determine if the network name is valid for use by the clustered SQL instance due to the following error: 'The network address is invalid.'
This happens whether I use the Advanced cluster installation procedures or the normal installation. I have tried the following based on anything I can find on the web:
1) Removed the clustered MTDTC role.
2) Deleted the NIC Team (4 1GB NICs). Deleted all but 1 NIC from the server device manager.
3) Shutdown the second node.
4) Lanman Server registry change posted someplace on this forum that does not stick on reboot
None of the above, separately or in combination, has worked to allow SQL 2014 to be installed as a cluster role.
There is no virtual machines added to the cluster. This is not a VMware installation. It is straight Windows 2012 R2 with a two node cluster (setup identically).
Any ideas, suggestions, comments?
Thanks,
-Andrew

Hi Alberto and Lydia,
The cluster was verified, there are only warnings related to a lack of redundant network paths as the cluster verification doesn't recognize a team of 4 nics are redundant. I updated AD to include the permissions detailed in the link Lydia provided,
still no go.
I'm not sure how to attach the installation logs to this message forum other than as text in the message, so here you go:
Summary:
Overall summary:
Final result:                  User cancelled
Exit code (Decimal):           -2068380094
Exit facility code:            1207
Exit error code:               1602
Exit message:                  User has cancelled.
Start time:                    2015-03-24 09:55:25
End time:                      2015-03-24 10:01:04
Requested action:              CompleteFailoverCluster
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Replication:     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for FullText:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DQ:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for RS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for IS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Conn:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Adv_SSMS:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BC:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SSMS:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for ComponentUpdate: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC_SDK:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Writer:          SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BOL:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Browser:         SQL Server Setup was canceled before completing the operation. Try the setup process again.
Cluster properties:
Machine name: SUN-PIE-CS-01
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Database Engine Services
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            SQL Server Replication
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Full-Text and Semantic Extractions for Search 1033
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Data Quality Services
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSRS12.MSSQLSERVER             Reporting Services - Native
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Basic                 1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Complete              1033                 Standard Edition     12.0.2000.8
No         Yes
SQL Server 2014
Client Tools Connectivity                1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Client Tools Backwards Compatibility     1033                 Standard Edition     12.0.2000.8     No
Yes
SQL Server 2014
Integration Services                     1033                 Standard Edition
12.0.2000.8     No         Yes
Machine name: SUN-PIE-CS-02
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Database Engine Services
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            SQL Server Replication
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Full-Text and Semantic Extractions for Search
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Data Quality Services
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSRS12.MSSQLSERVER             Reporting Services - Native
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Basic                 1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Complete              1033                 Standard Edition     12.0.2000.8
No         Yes
SQL Server 2014
Client Tools Connectivity                1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Client Tools Backwards Compatibility     1033                 Standard Edition     12.0.2000.8     No
Yes
SQL Server 2014
Data Quality Client                      1033                 Standard
Edition     12.0.2000.8     No         Yes
SQL Server 2014
Integration Services                     1033                 Standard Edition
12.0.2000.8     No         Yes
Machine Properties:
Machine name:                  SUN-PIE-CS-01
Machine processor count:       16
OS version:                    Windows Server 2012
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  Yes
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Database Engine Services
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            SQL Server Replication
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Full-Text and Semantic Extractions for Search 1033
Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSSQL12.MSSQLSERVER            Data Quality Services
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014      MSSQLSERVER          MSRS12.MSSQLSERVER             Reporting Services - Native
1033                 Standard Edition     12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Basic                 1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Management Tools - Complete              1033                 Standard Edition     12.0.2000.8
No         Yes
SQL Server 2014
Client Tools Connectivity                1033                 Standard Edition
12.0.2000.8     No         Yes
SQL Server 2014
Client Tools Backwards Compatibility     1033                 Standard Edition     12.0.2000.8     No
Yes
SQL Server 2014
Integration Services                     1033                 Standard Edition
12.0.2000.8     No         Yes
Package properties:
Description:                   Microsoft SQL Server 2014
ProductName:                   SQL Server 2014
Type:                          RTM
Version:                       12
SPLevel:                       0
Installation location:         \\sun-server2\data\Software\Microsoft\SQL 2014\x64\setup\
Installation edition:          Standard
User Input Settings:
ACTION:                        CompleteFailoverCluster
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
CONFIGURATIONFILE:
CONFIRMIPDEPENDENCYCHANGE:     false
ENU:                           true
FAILOVERCLUSTERDISKS:          <empty>
FAILOVERCLUSTERGROUP:          SQL Server (MSSQLSERVER)
FAILOVERCLUSTERIPADDRESSES:    <empty>
FAILOVERCLUSTERNETWORKNAME:    sun-pie-mt-01
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS:              false
INSTALLSQLDATADIR:             <empty>
INSTANCENAME:                  MSSQLSERVER
QUIET:                         false
QUIETSIMPLE:                   false
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSYSADMINACCOUNTS:           <empty>
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
UIMODE:                        Normal
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150324_095524\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Data Quality Services
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Integration Services
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Setup Support Files
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity SDK
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Writer
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Documentation Components
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Browser
Status:                        Failed: see logs for details
Reason for failure:            Setup was canceled for the feature.
Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150324_095524\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
    Message:
        User has cancelled.
    HResult : 0x84b70642
        FacilityCode : 1207 (4b7)
        ErrorCode : 1602 (0642)
    Stack:
        at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
        at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)

Finding & setting network address for WRT54GL v1.1

G'day -
I'm generally successful using a WRT54GL in a small home office network, but want to determine it's LAN and WAN network address and then set them manually. How can I search for this? It is no longer default 192.168.1.1 because that's being used by my DSL modem. Both are wired to a gigbit network switch, and connected via both wired LAN computers and WAN laptop.
My specific trouble of is that I'm having trouble getting a WAN Squeezebox to see the router. I suspect it's trouble with floating network addresses, so I'm wanting to do manual assignments. My first reaction is to not to reset the router because I figure it will want to take on the address of the DSL modem. Of course I could change the modem address, but since it's not broke...
WRT54GL is running Tomato 1.21. I'm a network novice. I tried to no avail following another post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Access_Points&message.id=9160&query....
Thanks!
Solved!
Go to Solution.

To determine the LAN Address, on a hard wired computer click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
Default Gateway address is your router's default ip address, Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.2.1(assuming the default gateway address is 192.168.2.1)...Leave username blank & in password use admin in lower case...
Click on the router Status tab and check for Internet/WAN IP Address, however you cannot change the WAN IP Address if it is Dynamic as it changes automatically...If you have Static IP Address then you need to ask your ISP to change the WAN IP address...You can indeed change the LAN IP Address of your router...

TB v. 24.0: Changed ISP's; ~ new email in Server Settings & Outgoing Server & all Address Books and Contacts; TB still showing old email ID for Fwd & Rply

TB v. 24.0, Win 7 Pro. Changed ISP's. I use Outlook 2007; wife uses TB, same box. Changed TB username & e-mail address in Server Settings & Outgoing Server & set as Default. Changed e-mail address in all address books and Contact lists. Now TB still showing old e-mail address in <From> when Reply or Forward. This is confusing recipients, who have been sending their replies off to a now-nonexistent account. Checked Windows Contacts - empty. Checked my Outlook 2007 - all Contacts changed appropriately. How do I kill that old e-mail address in TB when it isn't even listed any more - except when we try to Reply or Forward?

When you got the new email address and changed ISP's, you needed to create a new mail account for that new existing email address.
When a mail account is created there are many preferences setup to be able to manage and run that mail account. Trying to track down and modify all of those within the either the config editor or prefs.js is not only time consuming, but you could easily cause further problems if any error is made.
So I suggest you fix the original account by reentering all the old data. Then create a new mail account for the new exisitng mail address.
* File > New> Existing mail account.
or
* 3bar menu icon > New Message > Existing Mail account.
when you have both mail accounts in your left folder pane, you can choose to move any wanted emails from the older mail account into suitable folders in Local Folders. This will save a copy of emails.
Then you can delete the old account, leaving saved emails in Local Folders and only one new mail account.
To remove mail account:
* Tools > Account sEttings
* select old mail account
* click on 'Account Actions'
* select 'Remove Account'
* click on OK

Set up Oracle HTTP Server for a particular IP address

How do I set up Oracle HTTP Server to allow access control based on a particular IP address to certain CGI Scripts if a site is a local site?
I have tried this in httpd.conf file but it does not restrict a particular IP address (say 10.1.2.4) in my home network (consists of 3 PCs). 10.1.2.3 is the IP address of node where OHS is installed. I access my OHS from client like this http://10.1.2.3:7777/cgi-bin/printenv
ScriptAlias /cgi-bin/ "C:\oracle_home\Apache\Apache\cgi-bin/"
<Directory C:\oracle_home\Apache\Apache\cgi-bin>
AllowOverride None
Options None
Order Deny,Allow
Deny from all
Allow from 10.1.2.3
</Directory>
Note: - I have not made any changes in the default configuration of OHS.
Any help for a student like me will be highly appreciated.
Regards
Rajesh Kumar

No the idea is not to disable the signature. The reason why I wanted you to locate the specific block/deny was to make it easier to fix it. I would still recommend to use the Event Action Filters only to exclude the host and not disable the signature altogether.
That said, there are some signatures that "according to the documentation" cannot be excluded using event actions like Sweep signatures. These signatures have a field for Source/Dest IP built-in to exclude specific hosts. HOwever to be honest I could get event actions to work perfectly with event actions on our customers ;), so it could be an old restriction still mentioned in the docs.
Lastly, you only disable a signature when you are absolutely sure that you are not running the Software/Application/Service on your network. For example on one customer we would frequently get VPN 3000 COnc. HTTP attack signatures fired for internet traffic, and since there is no chance to add any VPN3k on this network (its already End of Sale), I disabled this signature.
Regards
Farrrukh

Very new user needs help setting up a three user network plus server

Hi,
I'm an owner/manager of a recruitment company in the UK and we use three mac minis in our office to run our recruitment software (on a filemaker database) internet, mail and MS Office 2008.
We currently use one of the mini's as a 'server' in so much that it has a external HDD attached and shared across the network. We use Airport Extreme to share the internet.
Although to begin with this set up has served us well the amount of data travelling across the network and the prospect of a couple of new employees starting has made me think it's time to invest in a network and server of some description.
With my very limited knowledge i'm proposing the following but would greatly appreciate some assistance from the forum users!
Install OSX 10.5.3 Server on one of the Mac Minis
Get an ethernet switch and cable the three minis together
Use the external HDD as a time machine backup and store all files on the 'server' HDD
Continue to use the Airport Extreme to share the internet over airport.
I have a couple of questions:
Can the Server computer still be used as a desktop or do we need to buy a new mini
Does this set up make the airport base station redundant
As we grow I would envisage enlisting the help of a specialist Mac IT support company but in the mean time any help would be greatly appreciated.
Thank you again in advance.

I would get something better specified than a mini to be my Mac OS X based server, and although you can run it as a desktop I wouldnt advise it.
You ought to go out and buy the book Mac OS X Server 10.5 Essentials - The only Apple-certified book on Mac OS X Server - which Ive found to be a godsend of a book in getting Leopard Server going. Make sure you get the 10.5 version. Im in the UK and got it from Foyles in London.
Your approach is fine, but Leopard Server isnt as plug and go as the rest of Apples products. In particular it just doesnt function correctly if you do not have working DNS before you start. Period. If you dont understand DNS in your office or If having read the book you find its too technical you might be better off buying a no-brand Network File Store/Disk or even a Time Capsule from Apple if its mainly shared disk space that you need.
Angus

I changed ISPs and had to change the server settings. Now one of my two email addresses crashes every time I try to read the emails.

At first Thunderbird downloaded every email from the problem account going back to 2011. I changed the server settings to only download emails from the last 15 days and to delete any messages older than 15 days.
I can send emails from this account and my other email account works fine for sending and reading mail. However, this problem account crashes Thunderbird every time I try to read the messages. There are now only 300 messages in the inbox and I've been able to have them marked as read. But I still can't read any of them.
What's the fix on this?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Setting up Network Address Server Settings (Static IP)

Similar Messages

Maybe you are looking for