Setting up network with ATT Uverse, Time Capsule, and Airport Extreme..HELP

PLEASE HELP!
I have ATT U-Verse which provides their own router. My Time Capsule is connected to the router (in the living room) via an Ethernet cable and has been working fine, and is set up like this:
Wireless Mode: Join a wireless network (I joined the ATT network 2wire)
Network name: 2wirexyz
Wireless Security: WPA/WPA2 Personal
Channel: 5
Connect Using: Wireless Network
When I try to add my Airport Extreme (for wireless printing in the office) by adding it to the same network (I've also tried to extend the network option) the Airport Utility thinks forever then comes up with an error and the Airport continues to flash amber. I've tried resetting the Extreme multiple times and configuring different ways but same result.
What am I doing wrong?? Please help, my wife is giving me grief for not being able to print wirelessly from her MacBook!!
Thank you in advance for any help you can give me!

Thank you Tessarax....
So does that mean I need to create a separate wireless network? I apologize, I'm not extremely familiar with how to complete what you've suggested. I know I've seen the bridge mentioned before in the Airport Utility when I've been trying different things. Would you mind giving me some more specific instructions please? Actually I just tried messing around with Airport Utility, let me know if I'm headed in the right direction:
For TC wireless mode I want to "Participate in a WDS network"?
Then where does my WDS remote come from? is that the Airport Extreme? I've plugged in the AEBS but it's not showing up in the Airport Utility...
I'll mess around with it some more tomorrow morning. Thanks I'll let you know how it goes.
Message was edited by: Jerimy75

Similar Messages

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • Airport Time Capsule and Airport Extreme connection

    I have replaced an Airport Extreme in my study upstairs by a brand new Airport Time Capsule 2T. It is the Airport Time Capsule that is connected to the Internet. The Airport Extreme has been moved downstairs and connected to the Airport Time Capsule by an Ethernet cable (run in a ventilation channel).
    First, I configured the new Airport Time Capsule alone (without the Extreme). Then, I connected the Extreme and, unfortunately, configured it as a new network. Now, I would like to undo the last step and have, as they should be. both the Time Capsule and the Extreme in the same network.
    The Airport Utility does not like it. Obviously, I am not doing things correctly.
    1. Should I reset both the Time Capsule and the Extreme, in what order and how ?
    2. How to delete unwanted networks from the list ?
    Regards - Kris

    You do not have to change the TC.. leave it as the standard setup.. as long as it is right.
    Reset the AE to factory and try again.. or just manually edit it.
    Click on the AE in the airport utility then click on edit.
    Go to the network tab and make sure it is set to bridge.
    Go to the wireless tab.. and setup .. create a wireless network.. NOT EXTEND.
    Use identical Wireless Name to the TC.
    Use identical Security setting (WPA2 Personal is only valid one really).. and same password as the TC.
    Then update your AE.. it is now part of the same network with the same wireless name..

  • Time capsule and airport extreme!!! or something else?

    Hi
    i have been looking into a new wireless device but do i really need a time capsule or a Airport extreme or is there something better out there?
    thanks

    Thanks for the additional info.
    The AirPort Extreme would support a hard drive, but unfortunately Time Machine backups are not supported by Apple to a drive at the USB port of the AirPort Extreme, so to meet both of your requirements, you would need to look at either the 1TB or 2 TB versions of the Time Capsule.
    In addition, either the Time Capsule (or AirPort Extreme) would provide you with simultaneous dual band wireless capability, so you'll have a 5 GHz band for faster, newer devices and and a traditional 2.4 GHz band for slower devices. With this type of setup, the slower devices will not slow down the faster devices on your network.
    There's a Guest Network feature as well if you plan to use the Time Capsule or Airport Extreme or Time Capsule as the main router on your network.

  • Time Capsule and Airport Extreme in different modes (n vs. g/n)

    Hello,
    I already have an Airport Extreme. I am very much looking forward to buying the new Time Capsule when it becomes available.
    Can I set up these two to create one wireless network so that the Time Capsule is n only and the Extreme is g/n? Without a cable? I have an adsl box with the extreme in our bedroom and plan to place the time capsule in another room with a couple of usb disks, where the noise does not disturb our sleep.
    If yes, could you give me short instructions how to do that.
    Help is much appreciated!

    Hi,
    here are the set-up instructions, starting at page 47 - http://manuals.info.apple.com/en/DesigningAirPort_Networks_Using_AirPortUtility.pdf
    Regards

  • Behaviour's difference between Time Capsule and Airport Extreme + Ext HDD ?

    Hello !
    I would like to know if there is any behaviour's difference between a Time Capsule and an Airport Extreme base station + External HDD ? For instance, once Time Machine configured, have I to mount manually the drive connected to the Airport Extreme to trigger the backup ? Or once my wifi is up, TIme Machine detects the Airport Extreme base station, the hard disk, and triggers the backup ?
    Regards,
    Mr Lejeune

    Theoretically there is no difference between the two. In reality there are two differences. First, Apple does not officially support Time Machine backups on a drive connected to the AEBS. If you run into technical difficulties you'll get no help from AppleCare techs nor from an Apple genius. Second, my experience suggests that it is a fragile backup backup system. My wife is using a TC at work whilst I have a base station and hard drive connected to it at home. Both of us have MacBooks, have the same software, and have the same basic habits. In a three month period I experienced frequent stalled backups - the last one fatal. After numerous attempts to get the backup going again I was forced to format the drive and start over. When I started over, having verified that the backup was working again, I abandoned TM and began backing up wirelessly using ChronoSync. My wife had fewer stalled backups (not none, but fewer) and thus far, nearly a year later, she has never had to format and start over.
    In theory, wireless backup with TM is a great idea but its execution presently leave something to be desired. Frankly, while I am using TM to backup to a tethered hard drive and I'm beginning to trust it despite being a version 1 product, I wouldn't rely on TC and TM as my sole backup scheme.

  • Time Capsule and Airport Extreme needed?

    I am a recent convert and perhaps made an over-purchase. I bought a MacBook, Time Capsule, and an Airport Extreme to complete my penance for being a longtime Windows user. In reading about my Time Capsule, I discovered that it is an Airport Station itself - cool!
    Do I really need the Airport Extreme or should I send it back?
    Thanks in advance.

    An Airport Extreme Base Station and a Time Capsule are the same as far as the router side is concerned. A TC is just an AEBS with a hard drive included. Unless you need two routers you should probably return one of them - the AEBS most likely unless you don't wish to use a TC for backups.

  • Differences between Time Capsule and Airport Extreme re Time Machine?

    We are [told|http://discussions.apple.com/thread.jspa?threadID=2299608] that a "USB drive connected to a recent dual-band Airport Extreme may work as a destination for Time Machine backups," but that "... it's not supported by Apple."
    With regard to Time Machine, what are the relevant differences between a Time Capsule and an Airport Extreme acting as a USB disk server, e.g. protocol used, size limits, server limitations, etc.?

    +We are told that a "USB drive connected to a recent dual-band Airport Extreme may work as a destination for Time Machine backups," but that "... it's not supported by Apple."+
    A bit of clarification. For the record, Apple says that you cannot do this in this Support Document. I haven't seen a similar document for Snow Leopard, but I'm sure it's out there. You will receive no assistance from Apple in the event of any problems.
    Despite this, some users have tried this anyway. Some report success, others report some success and yet others report no success. We've also seen a number of recent posts from users who say that it worked for them for a time...several weeks to several months...but they are now experiencing problems.
    Having experienced the latter myself first hand, my opinion would be that it would be unwise to even consider Time Machine backups with the AirPort Extreme unless you have another backup strategy already in place.
    The Time Capsule was designed to work with Time Machine backups. The AirPort Extreme was not. The answer may be that simple.

  • Troubling extending wireless network with Time Capsule and Airport Extreme

    I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
    2TB Time Capsule (Dual-Band II)
    1 Airport Extreme (Dual Band)
    I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
    Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
    Base station setup
    So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
    Extended station setup
    The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
    I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
    Results:
    Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
    What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
    Thanks to anyone with some insight here!

    Hello Kennuff. Welcome to the Apple Discussions!
    Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
    Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
    Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
    Configure the TC & AEBSn as follows:
    AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
    o Wireless Mode = Create a wireless network
    o Allow this network to be extended: <not checked>
    o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
    o Wireless Security: <configure both routers the same>
    AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
    o Connection Sharing = Off (Bridge Mode)

  • Time capsule and Airport Extreme

    Hi,
    I have a time capsule that is being used as my hub.  I have received the airport express as a gift.  Will this make a difference or should I return it.  What are the benefits of this.

    Welcome to the Apple Support Communities
    As you have a Time Capsule, you don't need an AirPort Extreme because both are routers, but you can use the AirPort Extreme to extend the wireless signal. If you don't need this, return your AirPort Extreme

  • Time Capsule and Airport extreme base station

    Hi everyone,
    I just have a dumb question. If i am using the AEBS for my internet (not wireless) can i plug in a network cable into the TC from the AEBS and extend the port availability?

    or maybe from an ethernet port on the AEBS to the wan port on the TC??
    Message was edited by: Utripn

  • Should I get a Time Capsule, an Airport Extreme, or a Linksys Wireless N?

    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Any help is greatly appreciated.

    Stuart Lawrence wrote:
    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    Enough of a difference for it to be worthwhile.
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    The backup app is Time Machine, not Time Capsule. TM can work with any external HDD connected to the Mac, but only TC is officially supported for wireless backups by Apple. Hacks are possible to connect a USB HDD to an Extreme.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    Better if we are talking N vs. G.
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    Yes, but that is a significant difference.
    If I get a Time Capsule then do I still need a Linksys router?
    No.
    Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    If you can setup your Linksys, you should be able to setup the AirPort as well.
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Sorry, none off the top of my head. Maybe you can provide the details on the computer she has.

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • Apple TV Inference with Time Capsule and Airport express?

    I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
    The TC and AE are configured to join my existing network....and have happy sat there for a few years.
    I would really welcome any ideas.
    Thanks
    R

    Welcome to the discussions!
    It sounds like you have the basic configuration covered correctly.
    You might want to check some settings on the TC:
    Wireless Mode would be create a wireless network
    "Allow this network to be extended" should be checked
    The AX should be set to "extend a wireless network"
    The "allow wireless clients" box should be checked
    In this configuration, the ethernet port on the AX is active so things should work.
    A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
    If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
    Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
    If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
    Please post back with your results.

Maybe you are looking for

  • How do I undo BC Partition repair in disk utility?

    Here's the summary: 8-core MacPro2,1 running 10.6.8, Paragon NTFS for Mac, Bootcamp Win7. 4 internal HDD drives: two 1.5TBs for data, one 1TB for MacOS, one 1.5TB for Win7 bootcamp. I mostly use the Mac side for music production (but rarely), and the

  • Calling a Report from Jsp

    dear all.... I am trying to call a report, from a JSP page, that's th steps i did: 1- I created the report with Oracle Reports 2- I saved it as .jsp 'Wos.jsp' 3- I integrated it in a new project, under Jdevelopper, i added the library, reports_tld.ja

  • Can't see AEB or AE when VPNed

    I encountered a problem where I can't admin my AEB or use AirTunes on my LAN when I am VPNed in to work. I already had to download and use the old Airport Admin Utility and turn IPv6 config Off just to be able to connect to the devices to admin. I ca

  • Capturing gives av files

    I am capturing video from an old Sony camcorder, but the clips do not appear in the bin. In the capture scratch folders, they are listed only as av files, and thus not compatible. What am I doing wrong?

  • JMS Health State

    At the following URL it states that the JMSRuntimeMBean and           JMSServerRuntimeMBeans expose a HealthState via a getHealthState() method           call:           http://e-docs.bea.com/wls/docs70/admin_domain/monitoring.html           From the