Setting Up New FCP5 HD Bay -- Need Help
I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.
You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high.
Similar Messages
-
My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
Good Luck!
DALE -
I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?
We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.
-
Help, new to Linux and need help installing 8i
I am new to Linux and some of this stuff..
Yet,I have gotten the JDK116_v5 installed and working on my box.
I have cut a cd for Oracle8i and need help..
I have also recopiled my kernal as well...
Does any one know where I can get help...
nullAl Pivonka (guest) wrote:
: I am new to Linux and some of this stuff..
: Yet,I have gotten the JDK116_v5 installed and working on
: my box.
: I have cut a cd for Oracle8i and need help..
: I have also recopiled my kernal as well...
: Does any one know where I can get help...
Try http://www.akadia.com/html/dod-frame.html for Redhat.
http://www.suse.de/~mha/oracle/ for SuSE
Also peruse these
http://www.akadia.com/html/dod-frame.html
http://jordan.fortwayne.com/oracle/
Colin.
null -
My D420 is not working on my new Mac Mini I need help
I have a new Canon Printer D420 . I love the machine works great
the price was great. It worked good on my old Imac for a few weeks then
I bought a new Mac Mini and now I can't get it to work. I reloaded my
solfware taht came with it..... need help
thanks
Ray LandHi Ray Land,
We can help narrow down the cause. What operating system are you using on your new Mac Mini?
If you are running the Mountain Lion OS, you can download the latest driver here. An important note is that the current print queue must be deleted before installing the new driver. This will ensure proper communication.
If this doesn't work or you need further assistance, please contact us here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
New to Indesign and need help on layout
Hi there
I have a small invitaiton business and have recently started using Indesign (steep learning curve). I have designed a wedding suite for a bride and it is ready to go off to the printers. My problem is i have recently changed printers and these guys print on size SRA3 and charge for set up costs if I dont supply all my setup in this size.
I dont know how to do this! Is there a simple way i can take my one invitation and place it multiple times on a SRA3 setup without copying and pasting. Plus all my crop marks and bleeds need to line up.
ANy help would be really appreciated.
thanks
NerissaI really did not want to say more about this but your attitude is ....
Who are you that you think you know every printers setup and requirements, who are you to say that a person must not go to there prefered printer for work.
What the hell does a car got to do with printing, NOTHING. Keep on topic!
You say modern workflow, so your saying every print shop in every town in every country has exactly the same equipment as your printer has and whats needed to handle your unprofessional approach to laying out graphics, wake up will ya every print house in every town can be different your arrogance in assuming every print house can reproduce your improperly prepared graphics is just going to cause trouble.
Refering back to the original post. I did not see the name of the printer they where sending the job to, do you know them personally to insist that your way is the best way to reproduce the job. NO!
You do not know them yet you jumped on my suggestion and it was only a suggestion that could lead to an idea for getting the job done. You called it BS yet every working day at my work I follow that sort of work flow for a number of reason. No it is not modern Yes it does work everyday.
You thinking that your way is the only way is no help to anyone in here.
This forum is for everyone, if I take the time to suggest something so be it, it is not your job to judge if my suggestion is wrong.
Be a help not a hinderance and keep your arrogance outta the forum.
P Taz:
Bob's main problem is this modern workflow chip on his shoulder, not everyone has the latest and greatest hardware and software. Adobe is printing longer then I care to think back on, and they have many different ways of doing this job and many of these are still in use. Modern is all fine and dandy if you have it.
I am not happy with using obsolete processes but that is what I have to work with. I absorb a lot that is said in these forums not all I can use yet but its good to see the changes in technology. Everyone as a designer has to keep in mind the Printshop that is printing there work
I never came in here with the intention to revert people, I only suggested a way to get a job done even you do not know what equipment the printer has to reproduce the OP problem. How in gods name can a suggestion be wrong for this forum even you have fallen for bob's inability to realise there are still people out in the real world not using the most modern workflow equipment and these people need help.
It is no good you just saying update update update. The job needs doing with what they have, later when money permits or whatever then talk to them about modern workflows.
And lastly goes out my appology to the original poster, I am very sorry this has gone as far as it has.
Bob... Lighten up! -
New internal order type--need help
Dear all:
i have a case need help.
now i want to create a new internal order type ,and assign a new number range and a default settlement rule to it .
the settlement rule is that the actual costs of this internal order type need to be
sent to a cost element .
what should i do step by step?
thanks!
best regards!Hi,
2. Order Master Data
2.1 Define Order types (KOT2_OPA)
IMG Controlling  Internal Orders Order Master Data  Define Order Types
An Internal order is created under an Order type. An order type is used for storing various control parameters and various defaults while creating an internal order. It is used for classifying various types of internal orders according to usage for e.g. Real orders for trade fairs, real orders for Capital investment measure, Statistical orders for motor vehicle expenses.
The order type is client-specific, which means that every order type can be used in all controlling areas. A number range is assigned to the internal order type.
Click on New Entries
Take a drop in the field Order category and select 01
Enter
Update the following
Give Order Type :- Z810
Description :- Traders First Real order type
Object Class :- OCOST overhead
Reference Order :- Collective order without automatic goods movement
Residence time 1 :- 12 months
Residence time 2 :- 1 month
Check Commit Management and Check Integrated Planning
Activate CO Partner Updating -You activate this so that allocations between orders and other CO objects (cost centers, projects, etc.), the partner information is retained and whether for each order a totals record should be written.
Save
Click on Field Selection
Here you can hide the various fields or make it as required entry or only display or available for input. Thus while creating internal order only those fields are displayed and available for input.
Click Save
2.2 Maintain Number Ranges for Orders (KONK)
IMG Controlling  Internal Orders  Order Master Data Maintain Number Ranges for Orders
Number Range needs to be assigned to the internal order type. Number range can be internal or external. In Internal numbering system automatically assigns a number from the given number range. In external numbering the user has to manually assign the number from the given number range.
We will configure internal number range for our internal order type Trade Fair
Click on Group Maintain (From the menu bar)
Click on Group  Insert (From the menu bar)
Update the following
From Number: - 910000000000
To Number: - 919999999999
Click in plus icon at the left bottom of the screen
Click Save
You will find internal order type Z810 in not assigned
You need to assign the order type to the group we created above. Proceed as follows:-
Position the cursor on: - Z810 Trade Fair real order type
Click on Arrow Z810 Trade Fair real order type note it turns blue
Select Check mark Z810 A ltd India fair real order
Click Element Group
The internal order type Z910 moves under the group which can be seen as follows:-
Z810: A Ltd India Trade fair real order / Z810 Trader Fair real order type.
Click Save
Select: - Z810: A Ltd India Trade fair real order / Z810 Trader Fair real order type.
Click on Pencil icon.
Click Back arrow.
2.3 Define Model Orders
IMG Controlling Internal Orders Order Master Data Screen Layout
Define Model Orders
Model orders are not orders in the commercial sense, but serve merely as references for creating "normal" orders. Model orders contain default values for the orders in an order type. The Model order is assigned as the reference order in the order type.
When you create a new order, all the fields active in the relevant order type are copied from the model order to the new order.
Example
You want to settle all your marketing orders to the same sales cost center. Stipulate the cost center as the default value in the model order for marketing orders.
When you create a new marketing order, the system defaults this cost center. If you want to settle the order to a different cost center, you can overwrite the default cost center in the orders.
We will create a model order with some defaults and assign it to the Trade fair internal order type
Click Create CO Model Order
Press F4 and select ($$) 03 model order
Click on the master data and update the following
Order: - $$$ Z81000001
Description text: - A Limited Trade affair
Click Save
Assign this model order to the order type Z810
Update the reference order with the model order number $$$Z81000001 in the reference order field
Click on save.
3 Planning
3.1 Maintain User-Defined Planner Profiles
IMGControllingInternal OrdersPlanningManual PlanningMaintain User-Defined Planner Profiles
Check the User defined planner profile ZOCM91 created by us contains the layouts for internal orders.
Double click on General controlling
Planning area: Cost element/activity inputs.
Cost Center: Activities/Prices
CCtr Statistical key figures
Orders: Cost Element/Activity inputs
Ord: Statistical key figures
Select :- Orders: Cost element/activity inputs
Double Click on Layouts for control
3.2 Maintain Planner Profile for Overall Planning (OKOS)
IMG  ControllingInternal OrdersPlanningManual PlanningMaintain Planner Profile for Overall Planning
Here you can specify the time frame for which values are to be planned for Internal order. Further you can also default the number of decimal places and the display factor. Default cost element group while planning.
Double click on Define planning profile for overall planning
Click on New Entries
Select 05 Planned Total
Profile: 810000 General Plan Profile A Ltd
Click Save
Select back arrow
Double click maintain planning profile for order type
Give: - Z810 Trader Fairs Real order type
Give Plan profile: - 910000
Click Save
4 Settlement
4.1 Maintain Allocation structure
IMG ControllingInternal OrdersActual PostingsSettlement Maintain Allocation Structures
An Allocation structure comprises one or several settlement assignments. An assignment shows which costs (origin: cost element groups) are to be settled to which receiver type (e.g. cost center, order and so on)
You have 2 options:- You can settle to a settlement cost element or settle by cost element i.e. settle using the original cost element.
We will use settle by cost element.
Click on New Entries
Allocation stru :- Z8
A Ltd : Internal order settlement structure
Click Save
Select Z8 Internal order settlement structure
Double click on Assignments
Click on New Entries
Assignment :- 10 Settlement Primary cost Element
Click Save
Select 10 Settlement Primary cost Element
Double Click on Source
Give From Cost Element To Cost Element
Save
Click back arrow
Note:-The color has become green
Select: Settlement primary cost element
Double click on Settlement cost
Click New Entries
Select CTR Cost Center
By Cost Element Check
Save
4.2 Maintain Settlement Profile
IMG Controlling Internal Orders Actual Postings SettlementMaintain Settlement Profile
Here we define a range of control parameters for settlement.
Double Click on Maintain Settlement Profiles
Click on New Entries
Select Settlement not allowed
Assign the allocation structure Z9 created earlier in the settlement profile.
Click on Save.
Select Back Arrow
Double Click on Enter Settlement Profile in order types
Give Settlement Profile Z9100
Click on Save.
4.3 Maintain Number Ranges for Settlement Documents
IMG Controlling Internal Orders Actual Postings SettlementMaintain Number Ranges for Settlement Documents
You should define separate number range intervals for settlement documents for each controlling area.
Click Group  Maintain
Click Group Insert
Update the following:-
Give From Number 1000000000- To Number 1999999999
Click on + at the bottom left side.
Click 8100
Click on Arrow icon.
Select Settlement documents for A limited Check box
Click Element group button
Click SAVE
Assign Points
Zia -
New to color correction - need help on too bright shot
Need help to fix this shot! I've been messing around with color corrector 3 way and nothing seems to help. I'm new to color correction and would greatly appreciate any advice.
Thanks,
JennyWhen you see white pixels in an overexposed shot, it means that there's often no pixel data to work with.
While the best option is a reshoot (this time with proper monitoring), you may want to try the "Captain's Blowout Fixer" filter available here: http://pistolerapost.com/pluginz/index.html
It let's you looks to see which color channel has the most remaining pixel data (if any) and work with it to overcome production screw-ups like this. Make sure you watch the tutorial on how to properly use the filter.
-DH -
New User KIN twom needs help!
Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here.
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone?
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G?
I can still receive text without 3G (text is not part of data- i think?)?
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3.
Can you use mp3 from the computer, put into zune and use it as a ringtone?
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online?
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate?
THANK YOU for your time in answering these questions.icekitsune714 wrote:
Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here. Hi and welcome to the boards!
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone? Correct, wireless providers do not charge for Wi-Fi use. However, it's very difficult to tell on the Kin whether you're using Wi-Fi or 3G, so I do recommend a data block. As you stated, you can also put the phone in airplane mode, but that does shut off the radio, so you will not receive any calls or texts when you do this.
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G? Correct, you would have to go online to My Verizon or call customer service to enable data. If you think you'll occasionally use it while out, maybe you want the $10 data plan ... $1.99/MB adds up fast!
I can still receive text without 3G (text is not part of data- i think?)? Yes, you will still receive texts. You can even receive MMS (pic and vid messages), but the customer service rep has to set this up correctly on your account. Be very careful that the rep doesn't remove the data block to allow MMS -- you will think you're using Wi-Fi and the charges will really add up.
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp. No experience with this, sorry.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3. Zune is great. It's free to use (unless you decide to purchase the Zune Pass, which is a music subscription for $15/month, plus you can keep 10 songs every month for your own collection). When Zune installs, there's a setting that syncs all the music and pics already on your computer. So when I installed Zune, all my music from Windows Media Player was there. You simply drag and drop to put on your Kin. You can also subscribe to podcasts through Zune. Plus the Kin does have an FM radio, which sounds good and shows current songs playing if the info is available.
Can you use mp3 from the computer, put into zune and use it as a ringtone? I don't think this worked for Kin users.
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online? I read that the Kin Bluetooth only works for headsets, not file transfer, but I'm not certain.
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate? This is because the ringer switch does not lock. So if your phone is in your pocket, you can bump the switch and put it in another mode. So you think it'll ring and it's on silent, for example.
THANK YOU for your time in answering these questions. -
Real Trouble Setting Up New WRT160N Router...Help Needed
Current configuration is as follows:
Motorola DSL modem paired with a Netgear Wireless-G router. Works fine, I have a connection.
There is a problem, though, accessing the router's browser interface. This has happened since I reformatted my PC from Vista back to XP Pro SP3. My computer came with Vista. The drivers for my "1394 Network Interface" are generic, and I am afraid that although the blinking green light fuctions when an ethernet cable is connected (router to PC), somehow something is not right. The router access address is not working (192.168.2.1). Perhaps I am entering it wrong? Do I need a port number? I run my PC wirelessly to the internet via a Netgear wireless PCI card that I have installed. It works fine.
My objective is to set up/configure my new Linksys/Cisco Wireless-N router (WRT160N). After I insert the included CD to begin the setup process, the setup process itself fails due to an error. The setup program tells me that it is unable to detect an ethernet port, and to enable it if it is disabled. Well, I do have one, and it has a driver, albeit probably not the correct one. But it is there, and the setup program won't let me continue because it can't see it. Here is where the fun begins.
I have already tried reinstalling the ethernet driver. I downloaded a PC information program like CPU-Z and it revealed my ethernet connector's manufacturer whose name escapes me at the moment. Since the PC came with Vista, I cannot readily find any XP drivers that will suit it. In a desperate yet feeble attempt I downloaded and paid for a driver-updater program, to no avail. My motherboard is an ASUS NodusM3. I have also tried to connect the WRT160N to my PC to check for any viable communication. None.
So in a nutshell I can't get the router's setup program to believe that I have a viable ethernet connection, in which case I may not because I can't get the PC to run off the router via an ethernet cable. I can't even access the router via the browser. In this case will I need new drivers? If so, where do I find them? How can this issue be resolved. It really sounds like a driver issue to me.The router uses no drivers. Connect at 192.168.1.1 not .2.1. Reset router by pressing reset button for 30 seconds. Release and wait 10 seconds, and power cycle. Connect to the correct IP of 192.168.1.1. via cable.
-
I have an itunes gift card and put it on an account that froze up and i had to create a new account. i have not made any purchases with this card yet and need to get it on my new account. help
Your credit card bill provides two important pieces of information for you:
1. The name of the merchant that made the charge
2. The telephone number of your credit card company. If you still dispute the charge after looking at the merchant's name, call the credit card company and let them advise how you should proceed. -
I have deleted my Apple ID from the apple store but had it previously associated with my Ipad, that I set 'to find' my ipad. but since i've deleted the orginal account I cannot access my ipad! The ipad is currently in DFU mode but still asks for a password, please help!
Your Apple ID still exists with the most recent password that you used. You can use it to erase your iPad. Read this.
-
New to iCloud and need help please with getting it working
I've got an iPad 2 and an iPhone 5 and have decided that it's about time to set up iCloud on my devices. I have followed the instructions on the website and in the icloud settings on both devices have switched on mail, contacts, calendars, reminders, safari, notes, photostream (my photo stream-on), documents and data, find my iphone, and icloud backup on. I have ensured that both devices have been backed up and automatic downloads on iTunes & App stores have all been switched on.
I have not yet set up my PC for iCloud.
My understanding is that icloud will sync new downloads and photos etc so I have just tried taking a picture on my iphone, expecting it to appear in my camera roll on my iPad and nothing has happened.
Please can someone advise me if I am doing something wrong or how to resolve this.
Many thanks.Welcome to the Apple Community.
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back. -
Im new to this and need help with putting a password on my wireless
I've had my linksys router for a few years now and recently have been asked to secure it so no one else in the neighborhood can connect to it but me but Ive never known how and I cannot find the installation CD for it. I have a model number# WRT54G. I tried searchin the forums but couldn't seem to find one I could understand. If anyone could please offer me some help on how to simply put a password on it so just my computer and the others in the house can access the wifi thatd be great. Thanks
To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or "Wireless Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption. -
Just got my first iMac and am new to the Mac operating system. I figured out how to set it so I could connect to the internet and also set my wallpaper and screensaver to my liking. After I shut it down and turned it on later, all of my setting were gone. It reset itself back to the original settings it had when I got it. I bought it at an auction and it was previously owned by a local community college. I did not get any disks with it. I have searched the internet on how to fix it and am more confused than ever. I don't know if I have Leopard, Snow Leopard, Lion, etc.
The computer seems to work just fine. It boots up quickly is loaded with programs I have yet to learn. I do know that it sat unused for a year or more. Could it be that the internal battery could be dead? I have looked but cannot find any kind of diagnostic test or information regarding the internal battery on the internet. Not exactly sure what kind of info someone would need to help me fix this issue. The hardware overview I found in system profiler looks like this:
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot Rom Version: IM41.0055.B08
SMC Version (system) 1.1f5
Serial Number (system) QP********U2S
Hardware UUID 00000000-0000-1000-8000-0016CB8BC90C
Any help or suggestions would be greatly appreciated and thanks in advance!
<Edited by Host>The retail version of Snow Leopard is 10.6.3, so the only way this model would be running 10.6.5 is if someone installed a version of Snow Leopard that came with a new iMac model with 10.6.5 pre-installed. In effect this computer has the wrong version of Snow Leopard installed which could be the reason for your problem.
I suggest you do this:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
After you receive your Snow Leopard DVD do the following:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Maybe you are looking for
-
Is it possible for someone to hack your internet a...
Well, my boyfriend borrowed money from a friend on a game, and I am being threated by the person (from Ireland) saying that him and his friend ( who know a great deal about computers ) are going to somehow disconnect our internet. I use Windows 8, so
-
Installation of Adobe Acrobat 6.0 Professional
I have Adobe Acrobat 6.0 professional and when I tried to re-install on my system I wa asked to provide my code ane there is no such code on my product 467758 my serial number is <serial number removed> please provide me this information
-
"Mini Barcode" follows pointer and overlays desktop icons after 10.4.10 upg
I have a G5 (about 4 years old). I recently upgraded to 10.4.10. After the upgrade I noticed a Mini BarCode like feature following the pointer around. In addition all desktop icons and the menu area were overlayed with this Mini BarCode type feature.
-
Files Won't Open on Intel-Based Macs
We are running 10.4.11 on our Mac Pros at work, and on the two Intel-based machines you can't open any files simply by clicking on them---it merely launches the program that the files should open in and then you have to open the files from within tha
-
Hi, We have ECC5.0 and ESS/MSS on EP6. We are unable to view the Payslip of the current month ,at the Portal end but at the R/3 end we are able to see the Payslip generated. whats the step that i am missing ? We are able to see the previous months' p