Setting up new ini with exisiting itunes

I just bought a new mini ipod from a friend. How do I make sure all the songs stored in my itunes will transfer properly? And, how do I register the new ipod to myself?
Thanks

Simply plug it in to your computer.

Similar Messages

HT1206 Can I sync my wife's new Iphone with "my" Itunes or should I just set up a new Itunes account on her computer???

I just tried to sync my wife's new Iphone with "my" ITunes. Bad mistake!! I guess "my" itunes thought her phone was mine and "somehow" went into "restore" mode and basically turned "her" phone into mine - ie. contacts, photos, etc.
Can your have two phones one Itunes?? Or should I just open a new Itunes account on her computer and "start" from scratch?? If I do the later, how do I transfer all the music on "my" Itunes to hers???

You can sync as many iphone/ipads/ipods as you like to one computer/library.

Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Mac says no update available.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

Hey, I'm trying to authorize my new laptop with my iTunes account. How would I go about doing this?

Hey, I'm trying to authorize my new laptop with my iTunes account. How would I go about doing this?

Hi Michael1296,
Thanks for visiting Apple Support Communities.
Here are the steps to authorize a computer in iTunes:
How do I authorize a computer?
Open iTunes on the computer you want to authorize.
Choose Store > Authorize This Computer from the menu bar.
You might need to show the menu barto see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still use it to authorize your computer.
If iTunes asks you to authorize your computer again, it won't use a new authorization. iTunes uses the same authorization for the same computer.
You can find these steps and more information at this link:
Authorize your computer using iTunes
All the best,
Jeremy

My daughter just synched her new iphone with her itunes account and it wiped out her contacts and pictures. Is there any way to recover them?

My daughter just synched her new iphone with her itunes account and it wiped out her contacts and pictures. Is there any way to recover them?

Sorry, unless she backup up the new phone before or is using iCloud to save the photos, the photos are gone.

Setting up new mini with sisters old software???

Im trying to export all of my sisters songs from her ipod software to my mini, is that possible or do i have to use my own software that i got with my mini? please help!?

I'm assuming that by "ipod software," you mean iTunes? The iTunes that you got with your iPod, and the one that she got with hers is the same. You should be able to plug it into her computer, and upload the songs just like you would on your computer. If your iPod is set to automatically sync with your iTunes when you plug it in, you will have to set it to manually update, so that it doesn't delete all your songs when you plug it into her computer. Switch it to manual update in iTunes preferences while your iPod is connected, and click on iPod.
-Michael

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

Hi Ramy,
As a work around , you can create a VM without installing OS and configure the Vlan of VNic , then export it .
The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT1296 Can I sync my new iPad with my iTunes from the cloud?

Can I sync my new iPad with my iTunes from the cloud?

Sync what sort of content ? You should be able to keep contacts and bookmarks between the two, but you can't directly copy music or films/tv shows between them - you will either need to sync those via your computer's iTunes, or if they are iTunes purchases and you are in a country where they can be redownloaded then they might show in the Purchased tab in the iTunes store app on your iPad

Setting up new computer with existing library

Just got a new computer with Vista. Have current iTunes library on an external HD. (old computer running XP) Can I just plug the HD in and have all my playlists and settings? Or could someone point me where to find info to set this up? We've got 3 iPods running on this library and am hoping this is easy.

See this recent discussion where I think I cover everything that may also apply to your situation as well. Post back with any questions...
http://discussions.apple.com/thread.jspa?messageID=8259991
Cheers,
Patrick

I bought 4 new songs with my itunes gift card and it is not playing the songs when i click on them, how do i fix this?

i bought 4 new songs on itunes with my itunes gift card. I went to play them and they would not play. They won't play on my phone or my ipod. How do i fix this so i know i didn't just waste $5?

Invalid, inactive or illegible codes:
http://support.apple.com/kb/TS1292
You can contact iTunes support here:
http://www.apple.com/support/itunes/contact/

New Nano with existing itunes account

I lost my Nano and just bought a new one. Is there anything special I need to do to make sure my ipod syncs with existing itunes? Can I just plug the usb connector into my desktop and it will download all my music on itunes onto my new Nano? Any help is appreciated.

Yes, just plug it in.
It will go thru the registration and then sync everything.

Best way to go from old pc to new pc with my itunes

I have just bought a new computer with os 8 what is the best way to transfer my itunes from my old computer to the new one?

Hey jshrews1,
Some things to consider which will assist in which direction you want to go. Are you going to be updating the OS when you do this migration? If you want to update the OS, say to 2012 R2 standard, you will have to do the migration, namely
the first method. If you are not going to update the OS, then the second or third method will work for you.
For the first method, there are plenty of technet articles that can help you. https://technet.microsoft.com/en-US/windowsserver/jj554790.aspx?f=255&MSPPError=-2147217396 is
a great resource for migrating to Windows Server 2012 R2.
For the second method, keep in mind you are moving hardware, so you want to make sure the BMR restore you perform is able to have new drivers installed in it for the new hardware. If you cannot push new drivers into the BMR image, you may (probably
will) experience issues with the restore, and the running of the server on the new hardware. If you can push drivers, RAID controller drivers would be the biggest worry, then you should be able to do the BMR, and have a working server at the end
of the restore.
For the third method, are you going to boot the physical to the VHD, or place it as a VM in Hyper-V? I would recommmend Hyper-V, and if this is the case, you will need to build the hyper-V host first, before you do anything with the current
production server.
Which ever method you choose, good luck with the migration. Remember Proper Planning Promotes Peak Performance, so make sure you document all the steps you want to take before you start, this way you know you will have hit everything you want.

Setting up new book with single pages but facing preview and breaking up pages at print time

I have a new book to design. Last time on a similar project (with 100 pages) I had a massive cry at print time as the printer wanted single pages with bleeds. I had set up the book with facing pages. When I unchecked to non facing pages I lost all my formatting and margins... I spent hours fixing this up.... I do need to show double spreads to the client as we go along and I do want to work in a mode that shows both left and right next to each other (ie in a book format). What do you suggest? I have been looking at setting up as single pages side by side and then at print time I think I can move all my right hand pages over with the break up page function and then fix up all my bleeds manually.? thanks in advance

lisalip schrieb:
no my printer needs 5mm bleed all around for the books I am doing and wants single pages with crops and bleeds
I will check the link and hope ok
I do prefer to design with facing pages but as I said it was a nightmare for me last time when setting for print
You confuse single pages with non facing document.
Every page has to be its own page. When your document has facing pages you have to set up a document with facing pages. There is no way around. Otherwise you will have problems with the left and the right page number and a lot of other issues.
If the printer needs single pages you have to export your document as PDF with single pages. That means deactivate the spread option in the PDF export dialog.
Here I have an example:
Situation:
In the 2 spreads on the top you don't have a problem when you export to a single page PDF. The bleed is taking material from the opposite page. It is ok and not disturbing.
But the bottom spread is different. Here you see a design break. It would be disturbing, if you take material from the opposite page. In many cases you would not realize it, but there are several situation where it might be a problem like glue or o-wire bindings where the bleed might become visible.
So you have to go to the page panel.
You have to select the spread first, then you go to the fly-out menu and select don't "allow selected spread to shuffle" pages. The numbers of the spread will appear in rectangle brackets.
Now you can drag the right (or left) page away from their counterpart on the spread. First you have to deselect any pages from that spread, so you can click on any thumbnail of any other page of any other spread. Then click on the right page of that spread. Only this pages has to be selected.
You see the icon of your curser changes as it is in the image above. Drag it as far as you see a thick vertical line. Then release sthe curser.
As result you have now seperate pages. You need only to extend the image, here on page 6. I have taken an image which is large enough, so I need only to move the image frame edge to the bleed.
When I export a single page PDF, as your printer wants I don't get problematic bleed from the opposite page.
You can download this example as IDML file. https://www.dropbox.com/s/qnotrl1ihe7umh7/SinglePages-Spread%20Ordner.zip

How do i associate my new mac with my itunes account?

I was trying to download a movie from icloud that I bought on itunes. it said that this device was not associated with my itunes account. how do I do that? I thought if I just logged into my account from this device it would do it.
Thank you

If the Mac is brand new you will need to authorize it, as well as sign into the store. In iTunes pull down Store > Authorize and enter your iTunes Store account AppleID credentials.

Setting up new ini with exisiting itunes

Similar Messages

Maybe you are looking for