Setting up Panther smart

I am getting a new iBook and it will be running panther
so I was wondering what are some good ways to configure panther or whatever
(what I mean is like I've heard that it is safer to use a standard account than an admin account so it won't allow you to mess up your computer on accident and stuff like that)
so stuff like that
please help and thanks in advance!

Hi. I guess it partly depends on whether or not you will be installing the system afresh. If you are, then it is always a good idea to boot from the installer disk and run Disk Utility to repair the volume before installing Panther. Another thing would be to look at the "customize" options during installation, since you may not want to install all the languages or printer drivers, particularly if your Mac is old and has limited hard disk space. Those are two things that come immediately to mind.
Once it is installed, of course you will want to update to 10.3.9, as well as doing other updates.
It's often considered good practice to have a User account that remains untouched. That way if you are troubleshooting you can log into that account to see if whatever problem you are having persists.
I'm sure other people will have more ideas but maybe these will help. Good luck. I like Panther.

Similar Messages

Using SET COUNTRY in SMART forms

Hi All,
We have used SET COUNTRY 'GB' in the smart forms initialization code editor.
But it is not reflecting currency formats & date formats in the country specific formats.
I have to change the setting only in smart forms code only as i will not be able to edit print program.
can any body solve this issue!
Any system setting we need to do!
Thanks in advance.
Thanks,
Deep.

hi..
U can change the settings in SU01.
give ur username.
Change in DEFAULTS tab, in Decimal Notation field.
regards,
Padma

I want to set a up smart album (in iPhoto "11) that auto-updates to a stream in iCloud that i have previously set up. How do i do this?

I want to set a up smart album (in iPhoto "11) that auto-updates to a stream in iCloud that i have previously set up. How do i do this?

I don't believe that this is possible right now.
iPhoto Menu -> Provide iPhoto Feedback for feature requests.

Using smart previews on iMac to control two sets of identical original files on two external drives --- render previews setting when using smart previews

I’m just getting started with Lightroom and if someone can help me I’ll be very appreciative.
I’m using an iMac with a 1TB drive and two external 2.5 TB drives for backup. My active files are on all three drives and I’m running out of room on the iMac drive.
With the smart previews capability of Lightroom 5, I’m hoping to remove all the active files from the iMac drive. I hope to import existing images into the LR catalog from two identical drives with identical folders and have both sets of images reflect the changes I make using smart previews on my iMac.
I just created two identical test folders of junk images on the external drives and was following a beginners tutorial on importing. However, I see nothing about using smart previews on my iMac that, when connected, will update more than one external drive at the same time.
I’m also wondering if, when using smart previews, it matters how I set the render previews during the import process.
Many thanks for any help,
Karl Hentz

I don't see any way to use smart previews to update both external drives at the same time. The smart previews are linked to a specific set of images. But it seems to me that if both drives are in fact identical, once the catalog is updated when one of those drives is connected those changes should also apply to the files on the other drive. It's actually the catalog that gets updated, not the images. Smart previews and regular import previews are completely unrelated. How you have your import previews configured will have no effect on your smart previews.
Incidentally, in order for my suggestion to work it would be necessary to only have one of those external drives connected. And when the other EHD is connected it would have to have the same drive letter or name. In other words it would have to appear to the iMac that it is precisely the same drive.

Can you set up a smart group to send to all email addresses for each card?

So several of my contacts have more than one email address. I'd like to set up smart groups that send to all of the email addresses for each contact. Is there any way to do this? I've seen some topics that mention applescripts, but that required a bunch of prompts. I want to have smart groups that automatically include every email address. Any thoughts?
Thanks!
Dan

A distribution list in Address book will only allow you to choose one email address per contact. There is no way to change that.
As you discovered, you can write an applescript that will send to all addresses in the contact. I'm not sure where you got the idea that it needed lots of prompts. There might have been prompts in the ones you saw because the user wanted to choose.

Language Setting for - Hyperion Smart View for Office

Hi,
Here's a scenario I need to find an answer to.
1. We have Essbase system 9 installed on a machine named: USESSSRVR and here the ESSLANG environment variable is set to "English_UnitedStates.US-ASCII@Binary".
2. We build two Unicode cubes, one for Korea Sales called APPKR.SALESCUB & other for Turkey Sales called APPTR.SALESCUB
3. Korean users are sitting in Korea & Turkey users are in Turkey & both these users need to see data in their local languages.
4. Since Essbase Excel Add-In is not compatible with Unicode cubes, we have asked them to use "Hyperion Smart View for Office".
Now question is,
-> Where in this entire system do I need to do Language Settings so that they see their characters correctly?
-> Is there a place in Smart View where you can set languages?
-> Also we have a limitation that we need to have both the applications APPKR & APPTR on the same Essbase server which is in US.
PLEASE HELP.
Thanks.
~Jaymin Darbari.

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

Set up a smart card for user logon to windows server 2012 R2

Good Evening,
I have Windows Server 2012 R2 Datacenter edition (dreamspark license)
Is it possible to successfully set up smart card logon to a server ? I already have the smart card reader, smart card and the certificate (which is also my digital signature) I know how to setup a DC role (as far as I know, the server has to be in a domain
to use smart card logon) I would like to logon using to my PC using a smart card and set the certificate I already have to use as a certificate for logon.
Kind Regards,
Tomasz

It would take a few things to do this, and could cause some security issues. In short, I assume the certificate you "already have" came from another environment or a commercial provider. You would need to configure your computer to trust that CA
to be an issuer of smart card authentication certificates. That effectively moves a good portion of your computer security control out of your environment. For many environments that is an unacceptable security risk.
If you dont have an Active Directory running, you will also need to make some accommodations to the standard guides. I dont believe there are any published guides on how to do this with a single server and third-party CAs.
Here are some references for generic smart card authentications. They are not 100% applicable to your need, so some interpretation is going to be needed.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

How do I set up Intel Smart Response on my hybrid drive

I own a HP Pavilion dv6t-7000 CTO Entertainment Notebook PC. I have a 1TB hard drive with a 32 GB SSD used for caching and accelerating using Intel's Smart Response Technology and Rapid Storage Technology console. I had to send in my computer for warranty service that included replacing the hard drive. I appears that the SSD may not have been configured. Below I have screenshots of the screen that now shows after the POST (that didn't appear before I sent it in for service) and the Intel RST console.
I'm just trying to get it back to its original settings, where it uses Intel's Smart Response Technology to improve performance. How should I configure the SSD given what shows in the screenshots below?
(You might have to right-click on the image and open it in a new tab to see it full size.)
Since it has come back I get the following screen after the POST. I am limited to options 3 (resetting to a non-RAID disk) and 6 (exit):
Intel Rapid Storage Technology console:
This question was solved.
View Solution.

It is fixed now. To fix it I did a complete backup of my files and settings, then, in the Accelerate window I clicked on Disassociate. I also reset to SSD to available. After rebooting a couple of times, all appears to be normal.

How can I set up a smart playlist for those free songs from iTunes?

I have been downloading all those free songs that iTunes gives out every week. I just realized that I never listen to them because they are not all grouped together. Is there a way to do that? I tried using a smart folder to do that but I don't think anything in those files is labeled "single of the week" so nothing came up. Any ideas?

That would work. Another option I just thought of is that since most my iTunes purchases are music videos I could just say show purchased content that is not a music video. I would still end up getting some stuff that wasn't the free songs but the results seem close enough. Since my song library has 3494 songs it would be hard to pick the free songs out individually.

How can I set up a smart album that looks for keywords?

Hi everyone,
I'm in the middle of a rethink on my image management and am wanting to setup smart albums that will search for and display images that have a certain keyword. When I create a new smart album to do this, I'm only given the ability to choose to search for rating and calendar criteria; the keywords and import session options are greyed out. My images have keywords assigned, so where do I go from here?
Thanks,
Andrew

OK, a step forward. It seems that if I create a smart album it will only look for keywords in the project that it is contained in.
Perhaps someone can help me then: I keep a collection of albums for each person that is featured in a photograph. These albums are stored outside of the projects that the images are stored in so I can have a collection of images that show person X from all the different shoots.
What I want to do now is keyword each image with the person's name (as a keyword) and then have a Smart album that will pick out all of their photos from my entire library, not just a certain project. How can I do this?

6.0.2 BUG: setting rating in smart playlists

I created a smart playlist and wanted to match all songs that were not one star. When I click on the section with the stars, I can select any number (and the number of stars follow the mouse as I drag it - as expected). However, when I release the mouse, the number of stars changes. I can only select 0, 2, 4, or 5 stars -- not 1 or 3. The cursor location -> number of stars mapping seems wrong because clicking on the first star yields 2 stars, but clicking on the second star yields 4 stars.
Selecting stars works fine in the library view.
Powerboox 17" 1.3GHz Mac OS X (10.4.3) I'm using the built-in LCD screen

Bug has been confirmed by more users.
See this topics:
http://discussions.apple.com/thread.jspa?threadID=309553&tstart=0
http://discussions.apple.com/thread.jspa?threadID=309584&tstart=0
M

Apple please add album art (set/unset) to Smart Playlist criteria

Please allow me to define a smart playlist defining all tracks that have album art vs those that don't. I don't think the criteria allows this right now.

BTW it works just fine too, creating a playlist of all your songs that lack artwork.
I agree. I had been meaning to download and use the no artwork script for some time and this topic got me to finally do it. I had no problems whatsoever, although I learned that a third of my tracks have no cover art.

Z68 G3 - Need help setting up RAID + Smart Response please.

Ok, this is the first time I am going to be setting up RAID. I have two new 64 GB SSD's hooked up to SATA 1-2 (The first 2 white SATA 6.0). I go into BIOS, and I set the settings to RAID, and then I enable SATA 1 + 2. I save and reset, and during the post, I press ctrl I. I see the raid settings with the raid devices... like its going to go into RAID set up; however, it then shows the logo screen for msi m/b and then goes to command and does nothing after that.
What am I doing wrong? Do I need to install the controller drives via floppy drive? Bad thing is I don't have a floppy drive, but I can buy one. Is there any way to install the controller with out the floppy? Can it be done via USB?
I just built this new system today, so I am very anxious to get it up and running, so please reply fast hehe Im waiting =D

Never mind, I wasn't pressure Ctrl I correctly

Smart Folders - How do I set it to search one particular folder only?

I want to set up a Smart Folder that will basically do the following:
1: Look in folder called "Client Work".
2: Find files modified in the last 1 week.
That's it. Point 2 I can easily manage, but I can't figure out how on earth I am supposed to set the Smart Folder to only apply its searches to one particular folder on my hard drive? I really can't figure out which option under "Other..." I am supposed to be using.
I'm sure there must be a simple solution though -- can someone please tell me what it is?
Thanks!

On the locations bar in the Finder Search window (where it says Servers Computer Home Others...) pick others and navigate to (with the + button), or drag the folder you want in the window and make sure it is the only folder selected. You will then have another button on the location bar Folder "Client Work". Select that button and save the search as a Smart Folder.

Smart Collection by Collection Sets?

Hey all,
Quick question on creating a Smart Collection within a Collection Set:
Here's the deal:
I have a collection set. In it, I have a collection of about 358 photos. From there, I rated the photos. I then tried to create a Smart Collection from within that Collection Set, searching for photos that are 3 stars or above as my only criteria. I targeted the Collection Set as the place where the Smart Album should be created. (So it's Collection Set > Collection and Smart Collection)
The issue is, with 3 stars and above being the only criteria selected, it is picking 3 stars and above from across my entire library, (returning about 17,000 photos that meet this criteria).
I only want "3 stars and above" from this particular collection set, but without having to add additional criteria (I am coming from Aperture, and this was easy to do by "Project." )
Is there a way to do this in Lightroom per collection set? I added a keyword as an additional criteria, and with 2 rules, it works the way I would like, but I really was hoping that Smart Albums could search by Collection Set and not across the entire library.
Any tips?
Thanks!
GG

GG,
Smart Collections always work on the entire catalog. You'd have to include the collection name as a additional criteria to achieve what you want.
Beat Gossweiler
Switzerland

Setting up Panther smart

Similar Messages

Maybe you are looking for