Setting up printing format. 3522

I was printing a user manual for a smart phone. After a lot of false starts I finally got just what I needed.
Printing in booklet format, 2 pages to a sheet and auto duplex so I got 4 manual pages on one sheet of paper The manual pages are half size of 8.5 by 11. I could print 16 manual pages at one time on 4 sheets of paper. Exactly what I needed. It would take 20 runs to do the whole job. cutting the sheets in half everything was fine.
Then disaster struck! the printer failed. A call to Canon got a replacment in warrantee.
But now I have lost the setup to print in the right format. I can't duplicate the results and I am only half way through the job.
Coming off the printer, I get a sheet of paper that has 2 manual pages on one side and 2 more on the other side. If I run 6 sheets at a time I get 24 manual pages. I am totally impressed at the software that does it so well.
But now I have lost the recipe for selecting the printing parameters. Can someone help. Is there a manual for the printer that describes the ptoper set-up?
Ever grateful for assistance or direction on finding what the various printer parameters mean.
Solved!
Go to Solution.

Hi Charlie-NP,
The user's manual for the PIXMA MG3522 can be downloaded from the Canon USA website. Please click here to go to the Brochures and Manuals page for the printer. Once on the initial download page for your model, please do the following:
1. Please select your language preference from the "LANGUAGE" section.
2. When the manuals are displayed, please click on the MG3500 series User's Manual you would like to download applicable to the operating system that is on your computer from the GUIDES AND MANUALS section. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

SSRS 2008 R2 why Link Report Print format different from parent?

Hi,
I have created a link report based on Report A.
In Report A I have set the print format to "LANDSCAPE", but the link report always appear in Portrait, any work around on this?
If this is one of the SSRS bugs, is that anyway I can disable the print button in Report Server?
Thanks

Hi SAMSUNG,
I can reproduce the issue in my local environment. As per my understanding, this scenario is caused by design.
In Reporting Services, Report server administrators have the option of disabling the print feature by setting the report server system property EnableClientPrinting to false. But this property will disable client-side printing for all reports managed by
the server. So if you want to hide the print icon in all reports, we can refer to the following document:
http://msdn.microsoft.com/en-us/library/ms155874(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to set print format what I want in ALV Report

Hi, guys...
Let me ask something.
In AVL Report, I want to set print format when users print list.
so, I used function 'SET_PRINT_PARAMETERS' on INITIALIZATION Event. but it doesn't work.
Looks like it works list program(using 'WRITE') only.
Please, give me some hint^^

Thanks for the reply...
But, I want to set print format like 'X_58_170'...
I call the fuction 'SET_PRINT_PARAMETERS'
... example)
CALL FUNCTION 'SET_PRINT_PARAMETERS'
    EXPORTING
      LAYOUT     = 'X_90_120'
      LINE_COUNT = '55'
      LINE_SIZE = '110'.
but, it doesn't work in ALV list program. It only works 'write' list program.
Give me an answer plz...
Regards
Kyung Woo

How to set the default print format for the report

Hi,
In ALV report , i want to defalut specific print format and printer for background processing .
Any clues!!!!!!!!!
Regards
Swatantra

Hi
Please check below code:
DATA: PRIPAR TYPE PRI_PARAMS,
      ARCPAR TYPE ARC_PARAMS,
      LAY    TYPE PRI_PARAMS-PAART,
      LINES TYPE PRI_PARAMS-LINCT,
      ROWS   TYPE PRI_PARAMS-LINSZ.
DATA: val(1).
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LOCL'   " <--- Printer Name
    no_dialog              = 'X'
    immediately            = ' '
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*** Specifying the page formats
    pripar-linct = 65.
    pripar-linsz = 190.
    pripar-paart = 'X_65_132'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    in_archive_parameters = arcpar
    in_parameters          = pripar
    no_dialog              = 'X'
*      list_name              = 'Testing Purpose Only' "l_list
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc EQ 0.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
write:/ 'Unable to create spool'.
ENDIF.
So now a spool is created with the required print parameters...
The list that is created from here will be in the spool.
Once the list is completed, close it with NEW-PAGE PRINT OFF.
Hope this helps.
Regards
Eswar

In printing from download how do you set your printer to print a pdf file without having to save it

i am using a HP OFFICEJET4500 G510g printer. i am usinmg a program that i am allowled to retrive prepareed documents that are pdf formated. my question is how to set my printer to print these pdf formatted document without having to save the document first

Hi there alpo64,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system and browser are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

SAP report print formats

Hi!
There are several report print formats in an ABAP report. You can choose between them during printing, some examples: X_65_80 (80 columns, 65 lines), X_90_120 (120 columns, 90 lines) and so on...
Is there away to define more "standard" like printer formats?
I know, I can give anything after the REPORT statement (like REPORT zreport LINE-SIZE 99 LINE-COUNT 99) but these are not standard and mostly the printers don1t like them.
Thank you in advance
Tamá

Hi Tamas,
When you run the report, the spool will be displayed on the screen. At this time, click on print,the system will show the print dialog. Click on properties, this will spool request attribites dialog. Click settings. in the next dialog box, select the required field, and the value and select the validity as required. This way you can set the standard format for all reports.
Ravi

Printing formatted Soap Message in conole

Hello,
I have written one service and one SOAPMessageHandler, in this class i need to print formatted soap message,but how i dont know
here is my code:
                                SOAPMessage soapMessage = context.getMessage();
                    SOAPEnvelope soapEnv = soapMessage.getSOAPPart().getEnvelope();
                    SOAPHeader soapHeader = soapEnv.getHeader();
                    if (soapHeader == null) {
                         System.out.println(" Adding Empty Header [" + this.getClass().getSimpleName() + "]");
                         soapHeader = soapEnv.addHeader();
                    QName qIdName =.....
                    SOAPHeaderElement soapHeaderElem = soapHeader.addHeaderElement(qIdName);
                    soapHeaderElem.setActor(SOAPConstants.URI_SOAP_ACTOR_NEXT);
                    soapHeaderElem.addTextNode("some id name");
                    soapMessage.writeTo(System.out);Can anyone tell me how to do that? is there some parameter set needed (As it is JAXB_FORMATTED_OUTPUT )?

Hi,
Can you try using ByteArrayOutputStream to print soap message
here is the snippet of code
=================
SOAPMessage soapMessage = messageContext.getMessage()
dumpSOAPMessage(soapMessage);
============================
private void dumpSOAPMessage(SOAPMessage msg) {
if (msg == null) {
System.out.println("SOAP Message is null");
return;
System.out.println("");
System.out.println("--------------------");
System.out.println("DUMP OF SOAP MESSAGE");
System.out.println("--------------------");
try {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
msg.writeTo(baos);
System.out.println(baos.toString(getMessageEncoding(msg)));
// show included values
String values = msg.getSOAPBody().getTextContent();
System.out.println("Included values:" + values);
} catch (Exception e) {
e.printStackTrace();
Hope that helps
Regards,
sunil

Error in setting up page format for Script.

Hi,
I have set up a customized page format.
I set up Page format, Format types and Device types.
I have throughly checked wit the other working formats, everthing seems right..
Page format : zmed_po - Portait
Format type : zmed_po
Error - No Printer font maintained for ZMED_PO.
Please help me out.
Cheers,
Sam

HI Sam,
For this u need to setup the printer at OS level. There u need to setup the fonts and etc.. related to the printer. I hope this is eror from OS level...
regards
reghu

Discoverer Plus Business Intelligence Print Format Problems

I am having a problem with setting the print settings to landscape. Under page setup before printing i set the Orientation to Landscape. The worksheet is printed in a landscape format, but the margins only go halfway across the page (under print preview the report fits on one page). It seems as if the program is taking the potrait orientation and just printing an image of the potrait printout in landscape. Does anyone know what the problem is? Thanks!

Hi
Discoverer Viewer is licensed the same as Discoverer Plus. If you have 1 Plus user and 20 Viewer users you need to be licensed for 21 users.
You can either buy named users or you can buy an unlimited license. The cutover point is 25 users becauses the last time I looked I believe the per user price was $800 and the perpetual was $20,000 per CPU.
The minimum purchase for named users is 5 so are you absolutely certain that 1 license you have isn't a perpetual license or even perhaps a Discoverer Admin license?
You should discuss this with your Oracle sales rep who may well be able to get you a better price.
Best wishes
Michael

Decimal Values in print formats

Hi All,
I had set 4 as value for amounts and quantity after decimal in
Genaralsetting but in print formats i need only 2 values after decimals. I thinlk for this some caliculations are there
please give me solution
Regards
Srinivas

Hi,
In PLD, By default Total field will be available.
You create one Formula field just over the Total field and make the formula field to display and make the Total field is inactive (ie., Untick the Visible check box of the Total field).
Formula : Round(Field_XYX,2)
Let's assume that, Total field's field name is Field_XYX and Formula Field's name is Field_YXY. Then in Field_YXY you should have the above said formula.
I hope this could help you.
Raja.S

Is it possible to change print format inside application.

It would be greate if end user can change the print format. For example one user wish get print file in Word, another one in PDF.
Best Regards, Kostya Proskudin.

Kostya,
That's possible, on the print attributes page there's an attribute called "Item" next to the output format. Using this attribute, you can choose an item in your own application to set the output format, e.g. you could use a select list, returning PDF, RTF, XLS or HTM. You will need to use BI Publisher for this to work though.
Regards,
Marc

Pre Printed Format Problem.

Hi, Experts.
My Client Have Pre Printed Formats so i designed PLDS In
PLD When I am Increasing Height Of The Page Header at this
time Page Footer Data Base Fields are changing there Size.
Similarly Page Footer also.
When we are Desiging For Pre Printed Formats What is the
Important things we have to Do ? We are Using DOt Matrix
Printer in this we have setting for Page Formats and Instially I
measure Existing Pre printed format then i conver it to Points
Bsed on this Points i created Layout here also iam not able to
get exactly in that fileds.
When we are using Pre Printed Formats intially what we have
to do ? I set
Printer :Epson LQ -1050+
Page Format:FanFold 8.5*12in
Margins
Left:20
Right 20
Bottom:10
Upper:10
I choose Grid -> Format:Contious Line
Size 10
were i need to set alignments ?
regds,
sampth.

Hi
When using a Dot Matrix printer you should follow the steps from the SAP Note 724904 that helps you with the paper size.
The Dot Matrix printer you are using is not supported so you may getting it working now, but may stop working in future patches or version as the application is not ready to work with this printer.
Those are the support printers
https://service.sap.com/smb/sbo/documentation -> SAP Business One 2005A
SP01 -> Solution Operations Guides: DB2, SQL, SQL2005, Sybase .
- Citizen PROdot 300
- Epson FX-880
- OKI MICROLINE 320 Elite
- Epson FX-890 (SAP Note 1064382)
Paulo Calado
SAP Business One Forums Team

Set Number/ Amount Format in SAPSCRIPT

Hi All,
How do you set the amount format to 111,111,111.00 in sapscript?
Is there a command like set date mask for this?
Thanks.
Tyken

Hi,
can you change your driver program? if so , write the code lines as below.
let us suppose your amount field has length 19 (output length: for this see the domain ) then declare a field of caracter type.
data: v_amount(19) type c, "Total length
v_amt(15) type c, "Length before decimal
v_deci(3) type c. "lenght after decimal
let us say your field is v_netpr
v_amount = v_netpr.
split v_amount at ',' into v_amt v_deci.
replace all occurances of '.' with ',' in v_amt.
clear v_amount .
concatenate v_amt '.' v_deci into v_amount.
now you can use this variable to print in the form.
if you cant change the driver program then the same logic you can use.
if you want to know how to writge the subroutines in the form then search for subroutines, you will get lot many results.
Reward pointgs if useful.
Regards,
Nageswar

PRINT FORMAT issue

Hi ALL,
We have recently upgraded to ECC 6.0.
We are facing an issue with the print format. In the BG job, we have set the page format as 'X_65_132', but when it is creating the spool it is changing the format to X_65_255.
Please give your valuable suggestions on what could be the reason for this?

most probably this is an unicode issue.
/correction
my above statement is crap. it should be the printer setting which make this happen.
just try the proposal of the poster below.
Edited by: Florian Kemmer on Mar 12, 2009 1:52 PM

How to create print format for report

Hi Experts,
Can we create print format for report program. I need x_90_150 format,
means 90 rows and 150 column. If possible then give me solution.
Thanks,
Ashish.

Get with your Basis folks to set up a 90x150 printer option.
Then you set something like this.
REPORT zlmr_lead_account_list LINE-SIZE 150 LINE-COUNT 90.

Setting up printing format. 3522

Similar Messages

Maybe you are looking for