Setting up router for ftp filezilla server

I want to share some files with family using filezilla ftp. I have set up my one computer running xp pro as a server using filezilla.
What I am having problems with is getting a complete port forwarding circle back to the client software. I have port 21 forwarded
to the computer that is acting as a server. However under passive mode i cannot complete this return. How do I set up my actiontec router to do this?
I am using the routers external address and the client is coming into my computer but the port (I think) needs to change on the return route. Can anyone help me?
Thanks in advance to anyone who can help.
Solved!
Go to Solution.

Is this correct?
Port Forwarding
This feature enables applications (Games, Webcams, IM & Others) by opening a tunnel between remote (Internet) computers and a specific device port inside your local area network(LAN).
Networked Computer / Device Network Address Public IP Address Remote Host IP Address Protocols WAN Connection Type Status Action localhost localhost Verizon FiOS Service – TCP Any -> 4567 All Broadband Devices Active Basement-2dc128a87 192.168.1.6
Basement FTP - TCP 20-22 -> Any All Broadband Devices Active Add
The TCP settings ? Many thanks !
Steve

Similar Messages

Please Help Me Configure Router for FTP

I have Verizon FIOS with the Actiontec MI424-WR router. I have been studying network configuration for hours, trying to figure out how to set up a simple FTP client with FileZilla, which is supposed to be easy. I have read the entire FileZilla FAQ and wiki, but I still can't connect to any FTP servers. I cannot even complete FileZilla's network configuration wizard. I use Comodo personal firewall too, but I'm pretty sure my problems are being caused by my router settings. Can anyone walk me through how the router should be set up to allow FTP? For starters, I need to set it to "allow outgoing connections to arbitrary remote ports," and I don't know how to do that. :-(

Tech support won't help you out with this..."outside the scope of support".
Now, if you are attempting to connect to it from the computer running the FTP server or another computer in your LAN, you would use it's IP address. You can find this by going to run -> type CMD press OK, -> now type IPCONFIG in the blinking command prompt. The IP address is going to be that computers address. so if you wanted to connect to the FTP from the same computer you can use that address AS WELL AS the prefix 'localhost'. If you wanted a family member to connect to you from outside, you would use the WAN IP which you could find out easily from like http://whatsmyipaddress.net/
Either way should work. Now just make sure you are port forwarding FTP, and should look like this, with the IP address being the FTP server's computer IP or just slect the 'Computer' from the list. Then click apply!

How to set (class)paths for a Managed server?

How does one configure the PATH and CLASSPATH and pass definitions (like "-Djava.library.path=c:\p\bea\wlserver6.1\bin")
to a remotely-started managed server?
The section in the WLS 6.1 AdminGuide.pdf that talks about configuring a managed
server's Remote Start tab says on pages 3-9 to 3-10 that, "If you don't specify
values for these fields and attempt to start the target server from the Administration
Console, the Node Manager will attempt to start the target server with the values
for these attributes that were used when starting the Node Manager. The Node Manager
will be able to start the Managed Server in that case if you specified the required
values on the command line when starting the Node Manager."
So it sounds as if I can get the java.library.path definition and CLASSPATH sent
to the server via the Node Manager startup command.
Does that work when using the Node Manager as an NT Service? Here is my Win2K
command file for setting up the Node Manager as an NT Service. Note that I'm trying
to tell it where to find the Windows native libraries (wlserver6.1\bin for wlntio.dll)
and the JDBC drivers (C:\SHADOW\jdbc\... and C:\Orant\jdbc\... ) :
========== BEGIN installNMNtService.cmd ================ @echo off
SETLOCAL
cd C:\p\bea\wlserver6.1\
rem *** Set Classpath to load Weblogic Classes
set CLASSPATH=.;C:\p\bea\wlserver6.1\lib\weblogic_sp.jar;C:\p\bea\wlserver6.1\lib\weblogic.jar;C:\SHADOW\JDBC\scjd12.jar;C:\orant\jdbc\lib\classes111.zip
rem *** Set Command Line for service to execute
rem *** %JAVA_HOME%\java will automatically be prepended.
set CMDLINE=" -ms16m -mx16m -classpath \"%CLASSPATH%\" \"-Dbea.home=C:\p\bea\"
\"-Djava.security.policy==C:\p\bea\wlserver6.1/lib/weblogic.policy\" \"-Dweblogic.nodemanager.weblogicHome=C:\p\bea\wlserver6.1\"
\"-Dweblogic.nodemanager.reverseDNSenabled=true\" \"-Djava.library.path=c:\p\bea\wlserver6.1\bin\"
\"-Dweblogic.nodemanager.listenAddress=111.111.111.123\" \"-Dweblogic.nodemanager.trustedHosts=./config/nodemanager.hosts\"
weblogic.nodemanager.NodeManager"
rem *** Install the service
"C:\p\bea\wlserver6.1\bin\beasvc" -install -svcname:EDANodeManager -javahome:"C:\p\bea\jdk131"
-execdir:"C:\p\bea\wlserver6.1" -extrapath:"C:\p\bea\wlserver6.1\bin" -cmdline:%CMDLINE%
ENDLOCAL
================= END installNMNtService.cmd ==================
But when I start a server remotely, it can't find the native libraries and it
can't find the JDBC libraries in the CLASSPATH. Otherwise, it can serve up HTML
pages at the correct port number so I know it's running.
When starting a managed server remotely via the WLS 6.1 console, how do I tell
the managed server where the native libraries and JDBC libraries are?
Thanks!

Hi,
The memory setting on the WC_Spaces managed servers can be seen as mentioned below.
ps -eaf | grep Spaces
Above command shows something like this at the top of the output:
/a01/app/oraweb/middle/jrrt-3.1.2-1.6.0/bin/java -jrockit -Xms512m -Xmx1024m -Dweblogic.Name=WC_Spaces1 ...
Regards
Sreedhar

How to set sap directories for FTP via TCode:AL11?

Hi, all
I want transfer data from a FTP server to BW. With TCode AL11 I setup SAP directory for FTP, format as following:
Z_MYDIR ftp://user:[email protected]
ftp://10.5.1.21 is the main directory in my FTP server.
but when I double click the row of the above, error occoured as the following:
Wrong order of calls <- CALL opendir(,,..)
I want to ask how to setup the ftp directory in sap al11, and why the error occoured.
Thank you very much.
Jiande Ding
Edited by: Jiande Ding on Dec 3, 2008 9:24 AM
Edited by: Jiande Ding on Dec 3, 2008 9:49 AM

Hi,
As i know there is no possibility if alphanumeric number range in sap.You check with any exit before updating the no in database.check this and post .
Regards,
Madhu.

Setting portrange directive for FTP

A few weeks ago I posted a question about FTP file listings timing out and got an excellent response from Camelot advising that I create a set of ports for passive FTP connection. This is done using the portrange directive in /etc/ftpd.conf. My Terminal skills are somewhat limited and I was unable to find the portrange directive. I am, however, good at following specific directions in the Terminal and would appreciate someone (Camelot?) detailing the commands to accomplish getting into and setting the portrange directive in /etc/ftpd.conf.
Thanks!
Xserve Mac OS X (10.4.9)

> My Terminal skills are somewhat limited and I was unable to find the portrange directive
That's not (necessarily) your terminal skills. By default there is no portrange directive in /etc/ftpd.conf - off hand I can't even remember if there is a ftpd.conf file at all. The issue is that if the file isn't there, or if a certain directive isn't in it, then ftpd uses the defaults - in this case any port number can be used.
You only need to add/edit the portrange directive if you want to use something other than the default.
So all you need to do is edit /etc/ftpd.conf using your favorite text editor to edit /etc/ftpd.conf and add a line:
<pre class=command>portrange all 60000 60010</pre>
to limit all connections to ports 60000 through 60010.
If you need specifics on driving a command line text editor, post back.

Problem setting 7606 router for TACACS+ authentication

Hello Support Community,
I have two Cisco 7606 routers which I have tried in vain to have users authenticated using TACACS+ servers. As shown below, I have two servers (1.1.1.1 and 2.2.2.2) reachable via vrf OAM which is reachable from desktops for ssh login. The true IP addresses and vrf have been altered because it's a company router.
I use the two servers to authenticate many other Cisco devices in the network they are working fine.
I can reach the servers from the vrf and the source interface in use. I can also telnet port 49 if the servers from the source interface and the vrf.
The server key is hidden but at the time of configuration, I can ascertain that it's correct.
The problem is that after confuring for TACACS authentication, the router still uses the enable password instead of TACACS. While the debug output shows 'bad password', why is the router not authenticating using TACACS? Why is it using the enable password?
Please study the outputs below and help point out what I may need to change.
PS: I have tried out many other combinations, including deprecated ones without success including the method suggested in this page;
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html
Please help I'm stuck.
ROUTER#sh running-config | sec aaa
aaa new-model
aaa group server tacacs+ admin
server name admin
server name admin1
ip vrf forwarding OAM
ip tacacs source-interface GigabitEthernet1
aaa authentication login admin group tacacs+ local enable
aaa session-id common
ROUTER#sh running-config | sec tacacs
aaa group server tacacs+ admin
server name admin
server name admin1
ip vrf forwarding OAM
ip tacacs source-interface GigabitEthernet1
aaa authentication login admin group tacacs+ local enable
tacacs server admin
address ipv4 1.1.1.1
key 7 XXXXXXXXXXXXXXXXXXXX
tacacs server admin1
address ipv4 2.2.2.2
key 7 XXXXXXXXXXXXXXXXxxxx
line vty 0 4
login authentication admin
ROUTER#sh tacacs
Tacacs+ Server - public :
               Server name: admin
            Server address: 1.1.1.1
               Server port: 49
              Socket opens:         15
             Socket closes:         15
             Socket aborts:          0
             Socket errors:          0
           Socket Timeouts:          0
   Failed Connect Attempts:          0
        Total Packets Sent:          0
        Total Packets Recv:          0
Tacacs+ Server - public :
               Server name: admin1
            Server address: 2.2.2.2
               Server port: 49
              Socket opens:         15
             Socket closes:         15
             Socket aborts:          0
             Socket errors:          0
           Socket Timeouts:          0
   Failed Connect Attempts:          0
        Total Packets Sent:          0
        Total Packets Recv:          0
Oct 22 12:38:57.587: AAA/BIND(0000001A): Bind i/f
Oct 22 12:38:57.587: AAA/AUTHEN/LOGIN (0000001A): Pick method list 'admin'
Oct 22 12:38:57.587: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:38:57.587: AAA/AUTHEN/ENABLE(0000001A): Done status GET_PASSWORD
Oct 22 12:39:02.327: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:39:02.327: AAA/AUTHEN/ENABLE(0000001A): Done status FAIL - bad password
Oct 22 12:39:04.335: AAA/AUTHEN/LOGIN (0000001A): Pick method list 'admin'
Oct 22 12:39:04.335: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:39:04.335: AAA/AUTHEN/ENABLE(0000001A): Done status GET_PASSWORD
Oct 22 12:39:08.675: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:39:08.675: AAA/AUTHEN/ENABLE(0000001A): Done status FAIL - bad password
Oct 22 12:39:10.679: AAA/AUTHEN/LOGIN (0000001A): Pick method list 'admin'
Oct 22 12:39:10.683: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:39:10.683: AAA/AUTHEN/ENABLE(0000001A): Done status GET_PASSWORD
Oct 22 12:39:14.907: AAA/AUTHEN/ENABLE(0000001A): Processing request action LOGIN
Oct 22 12:39:14.907: AAA/AUTHEN/ENABLE(0000001A): Done status FAIL - bad password
ROUTER#sh ver
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1(3)S3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 30-Mar-12 08:34 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRE, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1(3)S3, RELEASE SOFTWARE (fc1)
ROUTER uptime is 7 weeks, 5 days, 16 hours, 48 minutes
Uptime for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes
System returned to ROM by reload (SP by reload)
System restarted at 20:00:59 UTC Wed Aug 28 2013
System image file is "sup-bootdisk:c7600rsp72043-advipservicesk9-mz.151-3.S3.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO7606-S (M8500) processor (revision 1.1) with 3670016K/262144K bytes of memory.
Processor board ID FOX1623G61B
BASEBOARD: RSP720
CPU: MPC8548_E, Version: 2.1, (0x80390021)
CORE: E500, Version: 2.2, (0x80210022)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1:    D-cache 32 kB enabled
        I-cache 32 kB enabled
Last reset from power-on
3 Virtual Ethernet interfaces
76 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
3964K bytes of non-volatile configuration memory.
500472K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102

In order to resolve this issue. Please replace the below listed command
aaa authentication login admin group tacacs+ local enable
with;
aaa authentication login default group admin local enable
You defined the server group name as method list and instead of using admin as a server-group, you used tacacs+
Note: Please ensure you have local user and enable password configured in case of tacacs server unreachable.
~BR
Jatin Katyal
**Do rate helpful posts**

Set cisco router for dhcp

hi ! i want to set up r1 and r2 (see below) to get ip address from r3. what do i need to configure on all routers. thanks.
r1---r2--r3

Hi,
To configure a Cisco router as a DHCP server:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca75c.html
To acquire an IP address via DHCP on an Ethernet interface of the router, use the following command in interface configuration mode:
Router(config-if)# ip address dhcp
The question is how are your routers connected (what type of interfaces), and what is the purpose of this topology.
HTH,
Mohammed Mahmoud.

Set maximum instances for FTP polling

We are in the process of implementing our first BPEL integration involving the FTP Adapter on 10.1.2. However, it is not scaling well.
The FTP Adapter is set up to poll an FTP folder containing XML output from our sales system. Each record is in its own file. We imagine that in the event of communication disruption, the files could accumulate to several thousand fairly quickly.
The problem we are seeing when testing for this scenario is that the adapter picks up all the files at the same time and spawns a separate request for each until it overwhelms the server.
How can we change our process to prevent this from happening?

Oracle will tell you that a correctly tuned BPEL engine will cope...
but for those of us in the real world the only option I can think of that may work in 10.1.2.x is to limit the number of available threads (dspMaxThreads), and because that's a domain wide setting you'd need to create a seperate domain just for the processes with adaptors you need to limit.
I've read that in 10.1.3 you can specify process level thread limits.

How to set the CLASSPATH for an Sql Server 2005 database... help me please

Hello! Guys I want to access a Sql Server 2005 database from Java.I've downloaded the JDBC 2.0 driver from Microsoft.I've copied the sqljdbc4.jar file to C:\Java\jdk1.6.0_14\db\lib.And I've added this to the classpath C:\Java\jdk1.6.0_14\db\lib\sqljdbc4.jar.The classpath variable is defined as a user variable.Well the point is that I get that nasty exception:Exception in thread "main" java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver.So if you know how to help me,please do so.Thank you :)

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

Help setting up router for wireless printer

I recently purchased a wireless printer - but haven't been able to connect to the router. Router is a Linksys wireless G 2.4ghz w/ SecureEasySetup (SES). When I activate the SES button on the router - it will connect with the printer - but the router then re sets itself, my SSID changes to the Linksys default and I loose internet connection.
How can I use SES without the router resetting?

I assume that your wireless printer does not have SES.
When you use SES, the router resets the wireless settings. SES is designed to be used when both devices (router and wireless adapter) both have the SES feature. If only one device has the SES feature, then you cannot use the SES button, and the non-SES device must be setup manually.
Login to your router at 192.168.1.1, and write down the following settings on a piece of paper:
SSID
encryption type (probably WPA)
encryption key (sometimes called Password or Passphrase)
Next, follow the installation procedure for your wireless printer. At some point in the install procedure, it will ask you for the above info.
If you need more help, please state the model and version of your router. Also, please state the make and model of your printer.
Message Edited by toomanydonuts on 04-07-2008 12:25 AM

Setting up router for port forwarding - WRT54G

Hi all. I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?
After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?
Please assist! Thanks!

IIt;s usually to set the static IP outside the DHCP range like you said. You can use the router's DHCP reservation feature to set a "static IP", and as for your last question, you can find different methods on how to do that by searching the web.
I don't work for Cisco. I'm just here to help.

Any way to set "active mode" for FTP, or to use sFTP instead?

I have a web host that does not support passive FTP mode. I need to either set the mode to be "active mode", or I need to use secure FTP (sFTP). Is there any support for either of these within Muse?

Hi
By default , Adobe Muse FTP option uses " Passive Mode" , I am afraid its not possible to switch to "Active Mode" or to switch to Secure FTP. Alternatively, you may export the site locally using " Export as HTML " and then you may use third party FTP client to upload the site to your third party hosting using Active or Secure FTP.
Let me know if you have any further query.

Setting up datasource for MS SQL SERVER 2005 Express

Can anyone offer me a little help
I have SQL 2005 Express Edition installed on the same machine
as CF
I've been into it and enabled TCP/IP and NAMED PIPES
I've set TCP port to 1433
I've created a login account called CF and enabled both SQL
and Windows authentication
I've created a database called coldfusionDB
I've set windows firewall to make an exception for that port
In CF Administrator I'm using the supplied Microsoft SQL
driver. Can someone tell me what to put in the fields for the
datasource ? I have the following:
Port = 1433
DATABASE = coldfusionDB
SERVER = DESKTOP\SQLEXPRESS
the Error I'm getting back from CF Administrator is:
* Connection verification failed for data source:
cfclientstore
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver][Macromedia][SQLServer JDBC Driver]The requested instance is
either invalid or not running.
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver][Macromedia][SQLServer JDBC
Driver]The requested instance is either invalid or not running.

Try:
Server = localhost\sqlexpress
Database = coldfusionDB
Port = 1433
Also verify that the SQL server service has started.
These links may also help:
http://www.adobe.com/go/kb400255
http://www.mattwoodward.com/blog/index.cfm?event=showEntry&entryID=01930619-FD0A-4F02-31B1 BFC7D1D9A44C

Need hlp setting up router for gaming

First let me say that im not terribly tech savvy so please remember this if you post a response (thnx) I play Star was Galaxies online and i have wired 2 desktops and one wireless laptop connected to a wrt54gs router and its hooked up yo my modem. my internet works fine. heres the problem awful lag and 10-50 percent packet loss in the game. Gameplay is impossible. I contacted the games tech support and ran a pathping and tracert. after viewing this info the tech support told me that my router firewall was interfering and i should set it up to work with the game. the thing is i dont know how to do that (Doh!) In there response there was mention of configuring ports that the game uses but thats all greek to me. any help would be appreciated or possibly a link to a step by step to doing this thnx

Check this. http://portforward.com/

Setting an Alias for a report server URL

Can anyone guide me to on how to set a reporting server alias?
I have links to a set of reports that are accessed via a Sharepoint server site. I want those links to point to the server alias, and not the fully qualified URL of the report.
Thanks
K

Take a look at this thread...
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/476c0851-d424-46a5-9598-21c6afd41e78/ssrs-2012-with-no-virtual-folder?forum=sqlreportingservices#7473994e-95f2-446b-9919-ed4631ef22b4
You can create a DNS CNAME, but if you have SSL that will throw a loop in things... Otherwise see the last post in the thread linked above.

Setting up router for ftp filezilla server

Similar Messages

Maybe you are looking for