Setting up solaris 8 opreating environment after promt interruption
I was setting up my Solaris 8 desktop operating system using the automatically shown promt-questions (domain name, proxy server etc.) when I had to shut the system down.
Does anyone know how I can get to this set up session again so I don't have to set everything manually or reinstall Solaris 8?
Hia,
by my experience ...
If you were 'upgrading to s8 and it started the upgrade, ie, wrote to disk, you may have have to reinstall s8 from scratch ..
If you were installing s8 from scratch, ie, initial install than there is no way back half way into the install program as it is all done from cdrom/tmp so all that info would have been reset when the system was reset.
hope this helps .. sorry!
Similar Messages
-
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava ChunduriHi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava -
Unable to connect to environment after migrating Security from BPC 7.5 to BPC 10.1
Hi Experts,
We are working on BPC 7.5 to BPC 10.1 NW migration and after migrating the environment, we are unable to connect to environment.
While trying to access, we are getting the following error:
After taking a backup of the necessary environment in BPC 7.5 NW we are carrying out the 2 steps in the BPC 10.1 NW box:
Step 1 : Tcode UJBR - Restore the environment in BPC 10.1
Results: This is working fine.
Step 2: Program UJT_MIGRATE_75_TO_101 - Running the migration utility in BPC 10.1 to make the objects compatible with BPC.
2.1 Execute without Security Mapping
Results:
This is working fine. We are able to connect to the Environment and access the dimensions and models.
2.2 Execute with only Security Mapping
Results:
After this step, we are not able to access the environments and are getting the Logon error.
cannot get model "" in environment "xxxxxx" from Admin module
The logon attempt failed; contact your administrator.
If you have any options to resolve this error, it would be great.
Else, we will have to re-build the entire security design manually.
Regards,
Sushant PradhanHi Andy,
Thanks for your response. Yes, my id has SAP_ALL authorization.
Still unable to access the environment after migrating security.
To make things less complicated, we went back to BPC 7.5 NW - deleted all unwanted user ids, we kept only 3 user ids. Then, we took backup of application set and restored it in BPC 10.1.
We created a mapping file of those 3 user ids in BPC 10.1 as NW user ids and executed the Migration utility. Again we have same error.
Regards,
Sushant Pradhan. -
RMAN can't SET NEWNAME for datafiles added after Level 1
Version: 11.2.0.3
Platform : Solaris 10
I have the most recent Level 0 , Level 1 and post-L1 Archive logs of the source DB.
I am trying restore, recover in a different machine using plain RMAN (not RMAN DUPLICATE) into a new datafile location.
After the Level 1 backup was taken, 2 datafiles (namdata01.dbf, finaldata01.dbf) were added ( this got 'recorded' on the subsequent post-L1 archivelogs )
Before I ran restore and recover, I restored the latest control file from the most recent L1
RMAN> restore controlfile from '/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk' ;Understandably, this control file doesn't have info about the 2 datafiles added after L1 .Wish I could restore control file from archive log :)
So, I cataloged the archive logs as well using CATALOG command.
RMAN> catalog start with '/u01/CATALOGTST/rmanBkpPieces';
using target database control file instead of recovery catalog
searching for all files that match the pattern /u01/CATALOGTST/rmanBkpPieces
List of Files Unknown to the Database
=====================================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
RMAN> EXITDuring Recovery , RMAN applied the archive logs and managed to create the datafiles successfully. But it can't restore the datafiles to the new location specified in the SET NEWNAME location. Luckily , I had created the original path and these 2 datafiles got restored there.
RMAN can't seem enforce SET NEWNAME for datafiles added after Level 1 backup despite cataloging.
Does SET NEWNAME .... thing work only for RESTORE ?
Log of restore and recover
$ cat restore-recover.txt
run
set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
restore database;
switch datafile all;
switch tempfile all;
recover database;
$
$ rman target / cmdfile=restore-recover.txt
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Sep 16 21:27:49 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: SNTCDEV (DBID=2498462290, not open)
RMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }
10>
11>
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 16-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/app/CLONE1/oradata/sntcdev/system01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/app/CLONE1/oradata/sntcdev/users01.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/app/CLONE1/oradata/sntcdev/example01.dbf
channel ORA_DISK_1: restoring datafile 00006 to /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk tag=TAG20120828T234834
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:35
Finished restore at 16-SEP-12
datafile 1 switched to datafile copy
input datafile copy RECID=8 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=10 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=11 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/users01.dbf
datafile 5 switched to datafile copy
input datafile copy RECID=12 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/example01.dbf
datafile 6 switched to datafile copy
input datafile copy RECID=13 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
renamed tempfile 1 to /u01/app/CLONE1/oradata/sntcdev/temp01.dbf in control file
Starting recover at 16-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: /u01/app/CLONE1/oradata/sntcdev/system01.dbf
destination for restore of datafile 00002: /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
destination for restore of datafile 00003: /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
destination for restore of datafile 00004: /u01/app/CLONE1/oradata/sntcdev/users01.dbf
destination for restore of datafile 00005: /u01/app/CLONE1/oradata/sntcdev/example01.dbf
destination for restore of datafile 00006: /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk tag=TAG20120829T000356
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
starting media recovery
archived log for thread 1 with sequence 13 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
archived log for thread 1 with sequence 14 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
archived log for thread 1 with sequence 15 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=12
channel ORA_DISK_1: reading from backup piece /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
channel ORA_DISK_1: piece handle=/u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1 tag=TAG20120829T000454
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/archLogs/arch_1_12_790513173.arc thread=1 sequence=12
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
creating datafile file number=7 name=/u01/app/oradata/sntcdev/namdata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc thread=1 sequence=14
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
creating datafile file number=8 name=/u01/app/oradata/sntcdev/finaldata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
unable to find archived log
archived log thread=1 sequence=16
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/16/2012 21:29:51
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 16 and starting SCN of 1004015
Recovery Manager complete.
$
$
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Sun Sep 16 21:30:04 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from v$datafile;
NAME
/u01/app/CLONE1/oradata/sntcdev/system01.dbf
/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
/u01/app/CLONE1/oradata/sntcdev/users01.dbf
/u01/app/CLONE1/oradata/sntcdev/example01.dbf
/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
/u01/app/oradata/sntcdev/namdata01.dbf ----------------------> restored to old location ignoring SET NEWNAME ....
/u01/app/oradata/sntcdev/finaldata01.dbf ----------------------> restored to old location ignoring SET NEWNAME ....
8 rows selected.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ cd /u01/app/oradata/sntcdev # -----------------------------> the old location
$
$ ls -alrt
total 243924
drwxr-xr-x 3 oracle oinstall 512 Aug 5 10:55 ..
drwxr-xr-x 2 oracle oinstall 512 Sep 16 20:59 .
-rw-r----- 1 oracle oinstall 104865792 Sep 16 21:29 namdata01.dbf
-rw-r----- 1 oracle oinstall 19931136 Sep 16 21:29 finaldata01.dbfRMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }RMAN executes the commands in the run block stepwise. In your case, starting from "set newname for database..." and lastly executing "recover database...".
Let me interpret it for you.
1. You restored the controlfile from the L1 backup which does not have any information about the 2 newly added datafiles. You cataloged the backuppieces and the archives to this controlfile, which means that the controlfile would now be aware that the required backups and archives are in this cataloged location.
2. You set newname for database to the desired location, thereby this command is executed restoring the database from the L0 and L1 backups. (These 2 backups do not have any information about the newly added datafiles and hence the 2 files would still not be restored).
3. You execute restore database which restores the files from L0 and L1 backup.
4. Switch datafile all, this renames all the files that were restored in the previous steps to the desired name/location that was mentioned in step 2.
5. Recover database: This is where the archivelogs come into picture. The data in the archives would be created & recovered. The newly added datafiles are now created & recovered but RMAN does not go back to STEP 2 and STEP 4 to re-execute the commands in STEP2 and STEP4 to restore it to the desired location (STEP 2) and Rename it (STEP 4). The files will have to renamed later by moving them manually to the location that you require.
So, RMAN does not execute the SET NEWNAME for datafiles which were added after the backup as the information about these files do not exist in the RMAN backuppieces. -
after power interruption -all my folders went back with 3 years dates, How do i return lost files?
Malachi1234 wrote:
all my folders went back with 3 years dates
On what exactly? Your computer?
Do you have a backup off the machine that's stable?
Now your files are still likely there, it's just a naming issue or a PRAM/SMC problem for power and a cache corruption issue for the files.
If you don't have a backup of your files, copy everything you can to a external storage drive and disconnect it.
Next run trhough this list of fixes, I suspect the SMC/PRAM reset will help with the power issues and the #12 OnyX cache cleaning routine will set your folders right.
Remmeber after the PRAM reset to set your time and date correctly. Pehaps that is what s throwing off the date on the folders?
It's really hard to figure your problem out with the information provided.
https://discussions.apple.com/docs/DOC-3353
Again your files are likely very much still on the drive, you can recvoer anything as long as it hasn't be secure erased or overwritten by new data yet
Create a data recovery, undelete boot drive -
i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.
Contact Apple support for warranty service.
-
ISupplier - Setting up the Development Environment with JDeveloper 9.0.3
Hi friends,
Can you please tell me the steps involved in setting up the development environment for iSupplier Module with JDeveloper in my PC.
Please give me the details about what are the files to be downloaded from Apps, folder structure for development environment etc...
Gurus please reply ASAP.
Thanks,
SanYou should better pick the class files from the JAVA_TOP appropraite to that product and add it to either myclasses in your project in jdev or add it to the classpath.
Once you have these required files then you can launch the pages by either using a test.jsp or use the xml files directly if you know what parameters to pass. I would suggest you to use a test.jsp and launch the first page in the flow which launches from the menu - function by picking it's web_html_call. -
Setting the UNIX file permissions after writing the file to a directory
Hi Experts,
Can we set the UNIX file permissions after writing the file to a directory using Receiver File Adpater in SAP PI 7.1 ?
Thanks in Advance.
Regards,
JyotiHi
you can use the option "Run Operatiing system Command after File Processing" in the file adapter.
Thanks
Rinku Gangwani -
After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly.
This happened after update.
Final Cut Pro X 10.1.1 & Mac Pro 10.9.2Just refuse to open.
Player show me first page (background) & refuse to open.
Thanks. Greg. -
I want to set log_archive _start paramtere true after instance start up. af
i want to set log_archive _start paramtere true after instance start up. after setting database in archive log mode . How
everything OK with you ?
1. . can we use single listner for oracle 9i & 10g which is i
Posted on: Mar 15, 2008 6:01 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
2. how can i change max data file paramtere which is use in create database sc
Posted on: Mar 15, 2008 6:10 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
3. how see the globle name of database
Posted on: Mar 15, 2008 6:28 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
4. how sga use if i execute select * from emp whree empid=111;
Posted on: Mar 15, 2008 6:19 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
5. how u see how many database are on ur linux box & how many start or stop
Posted on: Mar 15, 2008 6:03 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
6. i want to set log_archive _start paramtere true after instance start up. af
Posted on: Mar 15, 2008 6:12 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
7. if i dont specify the log file in export but export complete with warning
Posted on: Mar 15, 2008 6:13 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
8. if ur database crash u have only export of database how u create database f
Posted on: Mar 15, 2008 6:14 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
9. is it possible to take export of close database
Posted on: Mar 15, 2008 6:13 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
10. is it possible we can define the path of control file backup by creating a
Posted on: Mar 15, 2008 6:20 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
11. Re: how we see versions of component those install with oracle
Posted on: Mar 15, 2008 6:36 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
12. row chaning how u eliminate
Posted on: Mar 15, 2008 6:23 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
13. Some inter view Questions Please give prefect answer help me
Posted on: Mar 9, 2008 10:32 AM, by user: aditi -- Relevance: 100% -- Show all results within this thread
14. ur database size is 100gb when u take export eport dmp sixe is 90gb but ur
Posted on: Mar 15, 2008 6:00 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
15. ur mount point have not more space and ur system table space is full how u
Posted on: Mar 15, 2008 6:06 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
16. ur temprory tablespace full . how u resize or increase size of file .
Posted on: Mar 15, 2008 6:04 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
17. user say ur database is slow how u slove this how identified reasons
Posted on: Mar 15, 2008 6:17 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
18. what is diffrence when u install 9i and 10g on linux. which feature provide
Posted on: Mar 15, 2008 6:08 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
19. what is facture block
Posted on: Mar 15, 2008 6:11 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
20. what is grid . how grid work. is it possible grid in 9i . how
Posted on: Mar 15, 2008 6:25 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
21. what is pre reqiest of rman implementation
Posted on: Mar 15, 2008 6:15 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
22. what is process of patching on linux & windows
Posted on: Mar 15, 2008 6:16 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
23. what is steps of cloning
Posted on: Mar 15, 2008 6:24 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
24. when u install oracle where the oracle installation inventory information s
Posted on: Mar 15, 2008 6:07 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
25. which type of joins we can see in tkprof information
Posted on: Mar 15, 2008 6:22 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread
26. why r we not use tablespce begin backup with read only tablespace
Posted on: Mar 15, 2008 6:18 PM, by user: aditi -- Relevance: 100% -- Show all results within this thread -
I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.
4 possible causes of that message:
1] Activation server is actually down. Very rare occurrence, but it does happen.
When it does occur, down time is very short. Solution - try again.
2] Your firewall or antivirus are blocking the connection. Solution - temporarily
deactivate your firewall or antivirus until the update completes.
3] Computer being used for the activation has previously been used to jailbreak
an iOS device. Solution - use a computer that has not been used to jailbreak an
iOs device.
4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
may have made changes that will prevent the iPhone from successfully activating.
Terms of Use for this forum prohibit discussion of jailbroken iPhones. -
Setting Up Shared Development Environment
Is there any diagrams, white papers, guides or best practices on setting up the J-Developer and connecting to shared Services and database? The Developer guide (E10148.pdf) does not really cover what the standards is or the overall infrastructure of the JDeveloper and setting up a Shared Developer enviroment.
I looking for something like http://docs.oracle.com/cd/E25178_01/fusionapps.1111/e15524/gs_install_e.htm but for (11.1.1.6.0) version webcenter.
I basically looking for something to help me get our Shared Development Environment setup with Jdeveloper.The issue is connecting the Jdeveloper to the WebCenter DS and Activity DS schemas. In the Development guide it says I need to connect to these schemas to be able to utilize several of the WebCenter Services, ( http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10148/jpsdg_svc_intro.htm#BHCDJHAI - 7.2.2 Setting Up a Database Connection
We are trying to set up the connection to our shared development environment database. Our database group is concerned with giving developers access to these schemas. They are concerned that JDeveloper will changes or modify the schema and cause the database to fail. They created a account with read only access but we are not sure it this will work.
I been trying to find anything in the documentation to find what access JDeveloper needs to the WebCenter DS and Activity DS schemas and if JDeveloper can modify these schema in any way.
Additionally try to find anything on the best practices on connecting to a shared database and setting up a Development environment and its connection to Jdeveloper . -
plz i have i phone 4 i restor it to 7.1.1 ios but icloud activation has been set up on th screen after restor .. this iphone is a gift from my father ..but he is dad plz plz help me
Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.
-
SSL-Problems when setting up a test environment with Exchange
Hello everyone,
I am trying to set up a test environment with Exchange 2013 to learn how the stuff works. However, I am facing some problems due to the fact that Exchange is designed for use with SSL certificates. The main thing that makes problems is the connection with
RPC over HTTP. I've used the MS remote connectivity analyzer to find out why it is not working and as I thought it is because of a missing SSL certificate (it seems the self signed doesn't work here). Now in order to get this working I just bought a certificate
for "mydomain.com". Now here is the first problem: This certificate is NOT a wildcard certificate. So if I understood correctly it works for mydomain.com but it won't work for subdomain.mydomain.com. Is this correct? (First question)
If this is correct I will probably another problem: As I said this is a learning-environment so the server is at home behind a router. This means: Only one WAN-IP. I think could get this working by forwarding everything to the Exchange Server (like mydomain.com
goes to the WAN-IP where the router is forwarding everything like port 25 or 443 directly to the exchange Server). This way I wouldn't have any problems I think: mydomain.com has a valid SSL cert, it resolves to my WAN-IP which forwards everything to the internal
Exchange Server. Now here is the problem: I plan to setup a SharePoint Server as well. I thought about using ARR (IIS) to make both available behind the same WAN-IP without using ports inside the url. Ideally the Exchange Server should then be available via
"mail.mydomain.com". This will work fine with ARR but then I probably have SSL problems again? (second question)
Do you have any ideas what I can do to solve such problems? Should I buy another certificate for mail.mydomain.com? But then I would need to buy several certificates (e.g. for autodiscover.mydomain.com to get this working as well). This can become very expensive...
Thanks!
Regards
ChristianHi,
For your first question, if there is a single certificate just for “mydomain.com”, it cannot work for subdomain.mydomain.com.
Generally, antodiscover.domain.com is used to access the autodiscover service for external users. If you just need test users to access Exchange server from internal environment, it is not necessary to get a certificate for autodiscover.domain.com.
Therefore, for your second question what I can ensure is that if all URLs that used to connect Exchange from internal and external are configured to mail.mydomain.com with all services(IIS,SMTP,POP,IMAP), there will be no certificate problems in Exchange
side.
Best Regards,
Winnie Liang
TechNet Community Support -
Just brought a new iPod touch and when I set it up (twice now, after resenting to factory settings) there are grey squares on all screens at the top and the apps over these squares won't open. Any suggestions?
I can't envision what yo are seeing.
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I have xp and have always been able to use bookmarks. The new Firefox allows me to go to a site with bookmarks, delete bookmarks, but I cannot add a bookmark by clicking on the star. Also, Ebay's pages have smaller print (and pictures) than they shou
-
I have 2 problems with Photoshop Elements 12 that I need help with
The problems: 1) When I bring photos into the editor to work on them and then save them they are not automatically appearing in Organizer 2) When I make changes in Organizer (eg adding or deleting photos) the changes do not appear in Adobe Revel. Whe
-
iTunes 7.0.2.16 for Windows has very slow animations when downloading, which cause ~90% CPU usage on my machine. Example stack from the busy thread in the iTunes process: ---8<--- ntkrnlpa.exe!KiUnlockDispatcherDatabase+0x77 ntkrnlpa.exe!KeSetEventBo
-
Can version 5.5 projects be opened in 8.0?
My team is preparing to upgrade (full license, vice upgrade license, apparently). The lead wants to ensure that our 5.5 projects will be editable/importable/updatable in version 8.0. Anybody know whether we'll encounter any issues when we attempt
-
Can't Open Downloaded Programs
Very wierd. Since upgrading to SL I can't open .dmg's of applications downloaded to the computer. Any ideas?