Setting up SSO between Sun Web Server and MS6.0

Hi,
I want to set up a trusted SSO between Sun Web server 6.1 and the MS6.0.The document does not give enough information about this.Any one done this before?
Thanks,
Ramnath

I'd recommend to cross-post your inquiry to the Security

Similar Messages

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Communication problem between external web server and SAP WebAS

Hello Experts,
We are having a serious problem over here where we had one external server is pushing XML string using a HTTP-POST request to our SAP WebAS server (a BSP application is handling this request). We are not able to see the request coming to SAP i.e. SAP-BSP is not receiving XML.
Also we found that, if request is routed through another proxy server (apache tomcat server redireting the request) connected through VPN to our network, it works but if the the same server is inside our network it doesn't. Rather in that case it never hits the Apache-Tomcat server itself.
We tried to identify the network issue but it seems it is not the network or any firewall issue. When we had a small Echo server (itu2019s a small Java server) running on our SAP machine, we could see the request coming in. So it is definitely reaching the SAP server but the SAP Web AS is not picking up. Rather what we found that if the URL is simple e.g. http://<hostname>:<port> it works but if the URL is complex like something generated by SAP incase of BSP application it doesn't.
Any idea what is causing this issue?
I tried to look at SMICM trace files but got nothing. Any idea where would find the trace of incoming HTTP requests to SAP WebAS?
Thanks in advance.
regards
rajeev

Hi Rajeev,
Pelase find the below link. i am not sure this is the exactly one for you. But i hope it'll help you.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0350917650DB11174011760851503410End?blog=/pub/wlg/10285
http://www.sap-img.com/basis/basis-faq.htm
Regards,
CSK.

Encrypt communication between SharePoint Web App and SSRS

Hi
I have SharePoint 2010 in multi server farm. The SharePoint web app has SSL enabled. The Reporting Server (SSRS) is http URL.
So when the Report Viewer web part is used, the communication between SharePoint web server and SharePoint Reporting Server is unsecured. The existing SSL has hard coded hostnames and for business reasons we prefer not to modify it.
Does anyone know how can I make that communication secured? Do I need to apply new SSL for SP Reporting Services? Is there any other option?

This should get you off and running on SSL
http://technet.microsoft.com/en-us/library/ms345223(SQL.100).aspx
and if you haven't go SQL on SSL - ->
http://technet.microsoft.com/en-us/library/ms189067(v=sql.100).aspx
Stacy Anothersharepointblog.blogspot.com

Silent install of Sun Web Server help

I tried to do a silent install of the Sun Web Server and I get the following errors....
while doing /path.../setup -s -f /path..../install.inf
after checking this is the error log I saw...I dont even see a SUNWwbsvr folder created under /opt.
[05/09/11:18:09:38] - [Setup] Info Start...
[05/09/11:18:09:38] - [Setup] Info Start silent installation...
[05/09/11:18:09:38] - [Setup] Fatal No components are specified to be installed.
[05/09/11:18:09:38] - [Setup] Fatal ServerRoot is not specified.
[05/09/11:18:09:38] - [Setup] Fatal Can't initialize installation!
[05/09/11:18:09:38] - [Setup] Info DONE
Can anyone help me on what needs to be done??
Thanks!
Anand

Did you follow the supported way for the silent install ? ===>
For windows :
http://docs.sun.com/source/819-0131/win.html#wp25280
For UNIX :
http://docs.sun.com/source/819-0131/unix.html#wp28818

Replace Quotes, Connection Pooling, and Sun Web Server with MySQL, Oracle

This is code I use to insert data into my MySQL and Oracle databases.
I takes care of quotes and shows use of context, i.e. when you use Sun Web Server's
ConnectionPooling. This code works. Feel free to reply if you have questions on how to set up connection pooling using Sun Web Server 6.1SP - it took quite a long time to learn and I couldn't find much information throughout the web, so I hope this helps...
This is not a question and I am not looking for an answer, but please post comments or suggestions.
dailysun
This is in one class where I have a hashtable containing the
column name / value pairs that I want to enter into my table.
This class simply creates the SQL string from the values in the
hashtable. It then passes that hashtable including the database
name to a class which executes that sql statement (second code
portion).
/* Insert data into sf_parts. Create the column strings from
 * the provided hash table. Be sure to parse out hash elements which
 * are used for the createTemplate process
 StringBuffer values = new StringBuffer();
 StringBuffer fields = new StringBuffer();
 Enumeration keys = fieldHash.keys();
 while(keys.hasMoreElements()){
 Object currentKey = keys.nextElement();
 String fieldValue = (String) fieldHash.get(currentKey);
 if(values.length() >0){
 values.append(",");
 values.append("'"+fieldValue.replaceAll("'","''")+"'"); // Takes care of quotes and various other special characters!
 if(fields.length() >0){
 fields.append(",");
 fields.append(currentKey);
 sql = "INSERT INTO myTable (" + fields.toString() + ") VALUES (" + values.toString() + ");";
 String insertResult = caq.getInsertDelete(sql,"myDatabaseName"); // your database name is defined in web.xml and sun-web.xml when you use Sun Web Server's Connection Pooling.
 returnValue += " Rows inserted into table(myTable): " + insertResult + " \n";
 And, like I describe above, this method executes the sql statement.
 * Takes care of insert, update and delete requests.
 * Must have set both dbName as well as the sql String.
 * Will return number of rows affected as String.
 * @return String Number of rows affected
 * @exception SQLException
 * @exception Exception
 public String getInsertDelete() {
 checkData(); // this simply checks if the variables dbName and sql are not empty ;-)
 InitialContext initContext = null;
 int rv = 0;
 try{
 // Get connection from configured pool
 initContext = new InitialContext();
 source = (DataSource) initContext.lookup("java:comp/env/jdbc/" + dbName); // I have this set up in web.xml and sun-web.xml (I use Sun Web Server 6.1SP which does connection pooling for me)
 conn = source.getConnection();
 if(conn != null){
 stmt = conn.createStatement();
 rv = stmt.executeUpdate(sql);
 }catch (SQLException e){
 // do something
 }catch (Exception e){
 // do something
 }finally{
 try{
 stmt.close();
 }catch(Exception e){
 // do something
 try{
 conn.close();
 }catch(Exception e){
 // do something
 try{
 initContext.close();
 }catch(Exception e){
 // do something
 return rv+"";
 }

This is code I use to insert data into my MySQL and
Oracle databases.
I takes care of quotes and shows use of context, i.e.
when you use Sun Web Server's
ConnectionPooling. This code works. Feel free to
reply if you have questions on how to set up
connection pooling using Sun Web Server 6.1SP - it
took quite a long time to learn and I couldn't find
much information throughout the web, so I hope this
helps...
This is not a question and I am not looking for an
answer, but please post comments or suggestions.Using prepared statements would mean that you wouldn't have to worry about quotes.
You should be closing the result set.
You are handling all fields as strings. That won't work with time fields and might not work for numeric fields.
Presumably most of your variables are member variables. They should be local variables because that is the scope of the usage.
You must do something with the exceptions.
Hashtables although convienent mean that problems with usage can only be resolved at run time rather than compile time.

What is the differece between Apache htttp web server and tomcat

Hi friends,
what is the difference between Apache htttp web server and apache tomcat.
Can i run php in tomcat

hi
1) different of apache and tomcat
http://forum.java.sun.com/thread.jspa?threadID=254299
2) different of apache tomcat and jakarta tomcat
http://forum.java.sun.com/thread.jspa?threadID=5191004

Differences between Web server and Application server

Differences between Web server and Application server:
We use Tomcat web server or sun Application server to deploy web applications . What is the differeences between these two servers?

http://en.wikipedia.org/wiki/Web_server
http://en.wikipedia.org/wiki/Application_server

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

Setting up SSO between EP and back-end SAP systems

Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
Thanu

Hi,
This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Some How-guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
Regards,
Sunil

Sun Java Web Server and IPlanet

Are there any issues with running IPlanet and Sun Java Web Server at the same time. The old Web-site are in Servlet format and the new Web site will be deployed with a .war file, so I would like to run both at the same time until I have customized the new Sun Java Web Server instance. Is this possible and if so are there any issues with running them at the same time?

You can install iPlanet Web Server and Sun Java System Web Server on the same Solaris system, provided that each server is installed to a separate directoy. If each server is configured to listen on a different port and/or IP address, the two servers can run concurrently without problem.

Difference between web server and application server

Hi Everybody
Could anybody expain difference between web server and application server?
Sharad

Hi there
The difference I know is the application servers provides the containers for the applications to run which is not provided by the web servers.
For example the containers can be an EJB container or JSP container etc

Difference between web server and servlet container

I can't able to figure out the techincal difference between web server(such as java web server) and servlet containers(such as jakarta-tomcat).If you please let me know then I will be very thankful to you.

The web server serves html pages to browsers that request pages. It can also send images, javascript, flash content, and a few other things. When a request comes into the web server for a servlet or jsp, the web server calls on the Servlet container to do THOSE jobs.
The Servlet container is the execution environment for a jsp or servlet (they are both servlets) to run Java code on the server and do logic.
So you see, the web server spits out static content, where either no logic is involved, or the client's web browser does the logic. The Servlet container is used for applications that execute code, perform logic, connect to databases, etc.
So they work together, but are completely separate logically.

Using Sun Web Server 6.1 from the IDE

Using JSE 8 with Sun Web Server 6.1 set as the target container, I have a SUNWS61deployment.xml file created.
That didn't exist in JSE 7. Is it WS 6.1 SP4 or SP5 -related ?
I also have ws61-sun-web.xml with a simple <sun-web-app/> tag (empty deployment descriptor).
What should this file contain? Is it a replacement for sun-web.xml?
Do I still need sun-web.xml? Its DTD declaration sounds like Sun
App Server 7 (http://www.sun.com/software/sunone/appserver/dtds/sun-web-app_2_3-1.dtd)
So you have plans to make "Sun Resources" (pools, JNDI resources, ...) created in the IDE be registerable directly in the Web Server just like it's possible with the sun app server?
How safe is it to use JSE 8 with an older Web Server Service Pack (say 6.1SP1)?

SUNWS61deployment.xml is created bythe IDE to be used internally and not to be used by the developer. This file wouldn't be sent to webserver after deployment.
The ws61-sun-web.xml is sun-web.xml only and yes it is same as it is in Appserver7 as the webcontainer for both Webserver6.1 and Appserver7 are same. After deployment to webserver, ws61-sun-web.xml is renamed to Webserver as sun-web.xml by the IDE. When opened the developer can edit in the XML editor.
The reason for having it as ws61-sun-web.xml in IDE is to avoid the clash between sun-web.xml of Appserver8.1 which is J2EE1.4 based whereas Webserver6.1 Web container is J2EE1.3 based.
It should be okay to use any service pack of Webserver6.1 with JSE8
Hope this helps

How do I use Sun Web Server 7.0u1 reverse proxy to change public URLs?

Some of our installations use the Sun Web Server 7.0 (update 1, usually)
for hosting some of the public resource and reverse-proxying other parts
of the URI namespace from other backend servers (content, application
and other types of servers).
So far every type of backend server served a unique part of the namespace
and there was no collision of names, and the backend resources were
published in a one-to-one manner. That is, a backend resource like, say,
http://appserver:8080/content/page.html would be published in the internet
as http://www.publicsite.com/content/page.html
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.
Another quest, possibly related in solution, was to make a tidy url for the
first page the user opens of the site. That is, in the current solution when
a visitor types the url "www.publicsite.com" in his or her browser, our web
server returns an HTTP-302 redirect to the actual first page URL, so the
browser sends a second request (and changes the URL in its location bar).
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
So far I found that I can't solve these problems. I believe these problems
share a solution because it relies on ability to control the actual URI strings
requested by Sun Web Server from backend servers.
Some details follow, now:
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
[04/Mar/2009:21:45:34] finest (25095) www.publicsite.com: for host xx.xx.xx.83
trying to GET /content/MainPage.html while trying to GET /test, func_exec reports:
fn="service-passthrough" rewrite-host="true" rewrite-location="true"
servers="http://10.16.2.127:8080" Directive="Service" DaemonPool="2b1348"
returned 0 (REQ_PROCEED)My obj.conf file currently has simple clauses like this:
# this causes /content/* to be taken from another (backend) server
NameTrans fn="assign-name" from="/content" name="content-test" nostat="/content"
# this causes requests to site root to be HTTP-redirected to a certain page URI
<If $uri =~ '^/$'>
 NameTrans fn="redirect"
 url="http://www.publicsite.com/content/MainPage.html"
</If>
<Object name="content-test">
### This maps http://public/content/* to http://10.16.2.127:8080/content/*
### Somehow the desired solution should instead map http://public/data/* to http://10.16.2.127:8080/content/*
 Service fn="service-passthrough" rewrite-host="true" rewrite-location="true" servers="http://10.16.2.127:8080"
 Service fn="set-variable" set-srvhdrs="host=www.publicsite.com:80"
</Object>
I have also tried "restart"ing the request like this:
 NameTrans fn="restart" uri="/data"or desperately trying to set the new request uri like this:
 Service fn="set-variable" uri="/magnoliaPublic/Main.html"Thanks for any ideas (including a statement whether this can be done at all
in some version of Sun Web Server 7.0 or its opensourced siblings) ;)
//Jim

Some of our installations use the Sun Web Server 7.0 (update 1, usually)please plan on installing the latest service pack - 7.0 Update 4. these updates addresses potentially critical bug fixes.
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.> now, if all the resources are under say /data, then how will you know which pages need to be sent to which back end resources. i guess, you probably meant to check for /data/page.html should go to <back-end>/content/page.html
yes, you could do something like
- edit your corresponding obj.conf (<hostname>-obj.conf or obj.conf depending on your configuration)
<Object name=¨default¨>
<If $uri = ¨/page/¨>
#move this nametrans SAF (for map directive - which is for reverse proxy within <if> clause)
NameTrans.. fn=map
</If
</Object>
and you could do https-<hostname>/bin/reconfig (dynamic reconfiguration) to check out if this is what you wanted. also, you might want to move config/server.xml <log-level> to finest and do your configuration . this way, you would get enough information on what is going on within your server logs.
finally,when you are satisfied, you might have to run the following command to make your manual change into admin config repository.
<install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
you might want to check out this for more info on how you could use <if> else condition to handle your requirement.
http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
finally, you might want to refer to this doc - which explains on ws7 request processing overview. this should provide you with some pointers as to what these different directives mean
http://docs.sun.com/app/docs/doc/820-6599/gbysz?a=view
>
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
please check out the rewrite / restart SAF. this should help you.
http://docs.sun.com/app/docs/doc/820-6599/gdada?a=view
pl. understand that - like with more web servers - ordering of directives is very important within obj.conf. so, you might want to make sure that you verify the obj.conf directive ordering is what you want it to do..
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
now, you are in the totally wrong direction. web server 7 includes a highly integrated reverse proxy solution compared to 6.1. unlike 6.1, you don´t have to download a separate plugin . however, you will need to manually migrate your 6.1 based reverse proxy settings into 7.0. please check out this blog link on how to set up a reverse proxy
http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
feel free to post to us if you need any futher help
you are probably better off - starting fresh
- install ws7u4
- use gui or CLI to create a reverse proxy and map one on one - say content
http://docs.sun.com/app/docs/doc/820-6601/create-reverse-proxy-1?a=view
if you don´t plan on using ws7 integrated web container (ability to process jsp/servlet), then you could disable java support as well. this should reduce your server memory footprint
<install-root>/bin/wadm disable-java user=admin config=<hostname>
<install-root>/bin/wadm create-reverse-proxy user=admin uri-prefix=/content server=<http://your back end server/ config=<hostname> --vs=<hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
now, you can check out the regular express processing and <if> syntax from our docs and try it out within <https-<hostname>/config/<hostname>-obj.conf> file and restart the server. pl. note that once you disable java, ws7 admin server creates <vs>-obj.conf and you need to edit this file and not default obj.conf for your changes to be read by server.
>
I have also tried "restart"ing the request like this:
NameTrans fn="restart" uri="/data"
ordering is very important here... you need to do this some thing like
<Object name=default>
<If not $restarted>
NameTrans fn=restart uri from=/¨ uri=/foo.
</If>

Setting up SSO between Sun Web Server and MS6.0

Similar Messages

Maybe you are looking for