Setting up Synaptics Touchpad in DV7t

Can the Synaptics touchpad be set up so the upper region of the pad will allow me to use it to scroll Back and Forward in previous pages? I see where Buttons can be used to do this but don't want to lose normal functionality of the left and right buttons to do this... Had an ALPS touchpad previously with my old Dell that allowed this and it was very handy....Don't see how to do it with this touchpad.

Hi and welcome to the HP Support Community.
This is an English language forum, so I have put your question through Google Translate which resulted in this:
Hello everyone, I have a huge problem, for me it is very important to have the mail on my TouchPad, since the buy'm trying to configure my hotmail without good answers, I have tried all the ways I've seen in some forums or amines pages, but nothing has been resolved, there are times when I get to the other server response I get the certificate expired, I tried with gmail is suddenly thinking that failure but no hotmail accounts can be configured .... Help please do not tngo laptop and just tngo this that I can not configure
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

[Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

Hi,
I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
xf86-input-evdev and xf86-input-synaptics are installed.
I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
My current 10-synaptics.conf:
Section "InputClass"
Identifier "Touchpad Catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 2275.127]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2275.130] X Protocol Version 11, Revision 0
[ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 2275.134] Build Date: 27 August 2012 08:04:39AM
[ 2275.135]
[ 2275.136] Current version of pixman: 0.26.2
[ 2275.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
[ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2275.144] (==) No Layout section. Using the first Screen section.
[ 2275.144] (==) No screen section available. Using defaults.
[ 2275.144] (**) |-->Screen "Default Screen Section" (0)
[ 2275.144] (**) | |-->Monitor "<default monitor>"
[ 2275.144] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2275.144] (**) | |-->Device "Intel Graphics"
[ 2275.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2275.144] (==) Automatically adding devices
[ 2275.144] (==) Automatically enabling devices
[ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2275.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2275.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2275.144] (II) Loader magic: 0x7c8b00
[ 2275.144] (II) Module ABI versions:
[ 2275.144] X.Org ANSI C Emulation: 0.4
[ 2275.144] X.Org Video Driver: 12.1
[ 2275.144] X.Org XInput driver : 16.0
[ 2275.144] X.Org Server Extension : 6.0
[ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2275.144] (II) LoadModule: "extmod"
[ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
[ 2275.145] (II) Loading extension XFree86-VidModeExtension
[ 2275.145] (II) Loading extension XFree86-DGA
[ 2275.145] (II) Loading extension DPMS
[ 2275.145] (II) Loading extension XVideo
[ 2275.145] (II) Loading extension XVideo-MotionCompensation
[ 2275.145] (II) Loading extension X-Resource
[ 2275.145] (II) LoadModule: "dbe"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DOUBLE-BUFFER
[ 2275.145] (II) LoadModule: "glx"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2275.145] (II) Module glx: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (==) AIGLX enabled
[ 2275.145] (II) Loading extension GLX
[ 2275.145] (II) LoadModule: "record"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2275.145] (II) Module record: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.13.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension RECORD
[ 2275.145] (II) LoadModule: "dri"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2275.145] (II) Module dri: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension XFree86-DRI
[ 2275.145] (II) LoadModule: "dri2"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.2.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DRI2
[ 2275.145] (II) LoadModule: "intel"
[ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2275.146] (II) Module intel: vendor="X.Org Foundation"
[ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
[ 2275.146] Module class: X.Org Video Driver
[ 2275.146] ABI class: X.Org Video Driver, version 12.1
[ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 2275.146] (--) using VT number 7
[ 2275.149] drmOpenDevice: node name is /dev/dri/card0
[ 2275.149] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2275.150] (==) intel(0): RGB weight 888
[ 2275.150] (==) intel(0): Default visual is TrueColor
[ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
[ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 2275.151] (**) intel(0): Framebuffer tiled
[ 2275.151] (**) intel(0): Pixmaps tiled
[ 2275.151] (**) intel(0): 3D buffers tiled
[ 2275.151] (**) intel(0): Throttling enabled
[ 2275.151] (**) intel(0): Delayed flush enabled
[ 2275.151] (**) intel(0): "Tear free" disabled
[ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
[ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2275.152] (II) intel(0): Output VGA1 has no monitor section
[ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
[ 2275.193] (II) intel(0): Output DP1 has no monitor section
[ 2275.193] (II) intel(0): EDID for output LVDS1
[ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
[ 2275.193] (II) intel(0): Year: 2012 Week: 0
[ 2275.193] (II) intel(0): EDID Version: 1.3
[ 2275.193] (II) intel(0): Digital Display Input
[ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 2275.193] (II) intel(0): Gamma: 2.20
[ 2275.193] (II) intel(0): No DPMS capabilities specified
[ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2275.193] (II) intel(0): First detailed timing is preferred mode
[ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
[ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 2275.193] (II) intel(0): Manufacturer's mask: 0
[ 2275.193] (II) intel(0): Supported detailed timing:
[ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
[ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
[ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
[ 2275.193] (II) intel(0): LG Display
[ 2275.193] (II) intel(0): LP133WH2-TLF1
[ 2275.193] (II) intel(0): EDID (in hex):
[ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
[ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
[ 2275.193] (II) intel(0): 1f505400000001010101010101010101
[ 2275.193] (II) intel(0): 010101010101581b566e500016302424
[ 2275.194] (II) intel(0): 480025a5100000190000000000000000
[ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
[ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
[ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
[ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
[ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
[ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
[ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2275.194] (II) intel(0): EDID for output VGA1
[ 2275.195] (II) intel(0): EDID for output HDMI1
[ 2275.236] (II) intel(0): EDID for output DP1
[ 2275.236] (II) intel(0): Output LVDS1 connected
[ 2275.236] (II) intel(0): Output VGA1 disconnected
[ 2275.236] (II) intel(0): Output HDMI1 disconnected
[ 2275.236] (II) intel(0): Output DP1 disconnected
[ 2275.236] (II) intel(0): Using exact sizes for initial modes
[ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
[ 2275.236] (**) intel(0): DPI set to (119, 121)
[ 2275.236] (II) Loading sub module "dri2"
[ 2275.236] (II) LoadModule: "dri2"
[ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.237] compiled for 1.12.4, module version = 1.2.0
[ 2275.237] ABI class: X.Org Server Extension, version 6.0
[ 2275.237] (==) Depth 24 pixmap format is 32 bpp
[ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
[ 2275.237] (==) intel(0): Backing store disabled
[ 2275.237] (==) intel(0): Silken mouse enabled
[ 2275.237] (II) intel(0): HW Cursor enabled
[ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2275.238] (==) intel(0): DPMS enabled
[ 2275.239] (II) intel(0): [DRI2] Setup complete
[ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
[ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
[ 2275.239] (==) intel(0): hotplug detection: "enabled"
[ 2275.239] (--) RandR disabled
[ 2275.239] (II) Initializing built-in extension Generic Event Extension
[ 2275.239] (II) Initializing built-in extension SHAPE
[ 2275.239] (II) Initializing built-in extension MIT-SHM
[ 2275.239] (II) Initializing built-in extension XInputExtension
[ 2275.239] (II) Initializing built-in extension XTEST
[ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
[ 2275.239] (II) Initializing built-in extension SYNC
[ 2275.239] (II) Initializing built-in extension XKEYBOARD
[ 2275.239] (II) Initializing built-in extension XC-MISC
[ 2275.239] (II) Initializing built-in extension SECURITY
[ 2275.239] (II) Initializing built-in extension XINERAMA
[ 2275.239] (II) Initializing built-in extension XFIXES
[ 2275.239] (II) Initializing built-in extension RENDER
[ 2275.239] (II) Initializing built-in extension RANDR
[ 2275.239] (II) Initializing built-in extension COMPOSITE
[ 2275.239] (II) Initializing built-in extension DAMAGE
[ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2275.250] (II) AIGLX: Loaded and initialized i965
[ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
[ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.319] (II) LoadModule: "evdev"
[ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
[ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
[ 2275.320] Module class: X.Org XInput Driver
[ 2275.320] ABI class: X.Org XInput driver, version 16.0
[ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.320] (**) Power Button: always reports core events
[ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.320] (--) evdev: Power Button: Found keys
[ 2275.320] (II) evdev: Power Button: Configuring as keyboard
[ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2275.320] (**) Option "xkb_rules" "evdev"
[ 2275.320] (**) Option "xkb_model" "evdev"
[ 2275.320] (**) Option "xkb_layout" "se"
[ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
[ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
[ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
[ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 2275.356] (**) Option "xkb_rules" "evdev"
[ 2275.356] (**) Option "xkb_model" "evdev"
[ 2275.356] (**) Option "xkb_layout" "se"
[ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
[ 2275.357] (**) Video Bus: always reports core events
[ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2275.357] (--) evdev: Video Bus: Found keys
[ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
[ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2275.358] (**) Option "xkb_rules" "evdev"
[ 2275.358] (**) Option "xkb_model" "evdev"
[ 2275.358] (**) Option "xkb_layout" "se"
[ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
[ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
[ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
[ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 2275.359] (**) Option "xkb_rules" "evdev"
[ 2275.359] (**) Option "xkb_model" "evdev"
[ 2275.359] (**) Option "xkb_layout" "se"
[ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.360] (**) Power Button: always reports core events
[ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.360] (--) evdev: Power Button: Found keys
[ 2275.360] (II) evdev: Power Button: Configuring as keyboard
[ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 2275.361] (**) Option "xkb_rules" "evdev"
[ 2275.361] (**) Option "xkb_model" "evdev"
[ 2275.361] (**) Option "xkb_layout" "se"
[ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 2275.362] (II) No input driver specified, ignoring this device.
[ 2275.362] (II) This device may have been added with another device file.
[ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
[ 2275.362] (**) FJ Camera: always reports core events
[ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
[ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
[ 2275.363] (--) evdev: FJ Camera: Found keys
[ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
[ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
[ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
[ 2275.363] (**) Option "xkb_rules" "evdev"
[ 2275.363] (**) Option "xkb_model" "evdev"
[ 2275.363] (**) Option "xkb_layout" "se"
[ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2275.365] (II) No input driver specified, ignoring this device.
[ 2275.365] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
[ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2275.366] (**) Option "xkb_rules" "evdev"
[ 2275.366] (**) Option "xkb_model" "evdev"
[ 2275.366] (**) Option "xkb_layout" "se"
[ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
[ 2275.366] (II) LoadModule: "synaptics"
[ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
[ 2275.367] compiled for 1.12.2, module version = 1.6.2
[ 2275.367] Module class: X.Org XInput Driver
[ 2275.367] ABI class: X.Org XInput driver, version 16.0
[ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "Device" "/dev/input/event8"
[ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2275.367] (**) Option "TapButton1" "1"
[ 2275.367] (**) Option "TapButton2" "2"
[ 2275.367] (**) Option "TapButton3" "3"
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
[ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ FJ Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
running
dmesg | grep -i synaptics
doesn't show anything. However running
dmesg | grep -i psmouse
returns a lot of
psmouse serio1: bad data from KBC - timeout
Last edited by flako (2012-11-08 09:44:59)

I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly. So yeah, our problems weren't really related
Anyway, I tried looking into the
psmouse serio1: bad data from KBC - timeout
messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
Last edited by flako (2012-09-09 12:10:51)

Satellite L955-10K - Synaptics Touchpad Driver does not work properly

Hello, ASRR here.
I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
The cursor moves, and works fine but the gestures don't.
When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
I really do not know what to do. Could somebody PLEASE help?
My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
Any help would be greatly appreciated. Thanks

>One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
Back to the Synaptics touchpad driver.
Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
http://www.synaptics.com/en/drivers.php

Synaptics touchpad blocked & delay when using the keyboard in Windows 8.1

Sometimes (possibly when I use the keyboard and then quickly attempt to move the mouse arrow on the screen with the Synaptics touchpad), I am unable to move the cursor for a half of second-or-so.
Sometimes I cannot tap to click, maybe, few seconds (it is very annoying).
There are some Mouse and touchpad settings in Windows 8.1 ("To prevent the cursor from accidentally moving while you type, change the delay before clicks work") which I set to "No Delay (always on)" but it does not work, either.
I also checked the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\PrecisionTouchPad
but "AAPThreshold" is set correctly to 0 (No delay).
But I still experiences problems and touchpad does not work while typing and sometimes also few moments after.
Using HP Zbook 14, Win 8.1 x64, Synaptics driver 17.0.18.23.

Hi,
If you trying connect two Universal apps through Bluetooth, can you check if the
Windows 8.1 Bluetooth RFComm sample runs fine on both the devices? I successfully tested the Windows 8.1 Bluetooth RFComm sample on Laptop (Windows 8.1) and Windows Phone 8.1 (paired).
Make sure the service which you are trying to advertise/listen is supported by both the devices.
-Sagar

Synaptics touchpad on 4540s works for one person but not another

The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

[UNSOLVED] Synaptics Touchpad & Firefox: Horizontal Scroll

Hey guys.. i'm having a problem with my laptop's Synaptics Touchpad and Firefox.
I can't seem to get my touchpad to allow me to scroll horizontally in the browser (when, say, there's a wide image on a page for instance). Whenever I try to scroll by sliding my finger side-to-side on the bottom edge of my touchpad, the page scrolls up and down, just like the vertical scroll on the right edge!
At first I thought it was a problem with horizontal scrolling on the Synaptics driver in general, but I discovered that if I have something like File Browser open, I can scroll horizontally with the touchpad, so the problem lies ONLY with Firefox.
I have looked for solutions already and everything I find only talks about a possible issue where Firefox might treat the Touchpad's horizontal scrolling and Forward and Back actions and how to fix this. But this is not the problem I am having. But I do have mousewheel.horizscroll.withnokey.action set to 1 in my about:config, which from what I've read is supposed to be correct to allow h. scrolling.
Any ideas?
Last edited by flintmecha (2008-12-01 23:24:37)

FYI, with my Synaptics touch pad and firefox, it works, but I have the mousewheel.horizscroll.withnokey.action set to 0 (default). In fact, all of the settings in about:config with 'mousewheel' in them are all at the default setting. I just had to setup the xorg.conf (old way) or the the /etc/hal/fdi/policy/11-x11-synaptics.fdi (new way) correctly to enable the horizontal scrolling.
Good luck!
Scott

Synaptics Touchpad doesn't work correctly after update

I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
xf86-input-synaptics is installed, version 1.4.0-1
Since an update, I get the following error when running startx:
Query no synaptics: 6003C8
Touchpad unable to query/initialize Synaptics Hardware
PreInit returned NULL for "Touchpad"
That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
[ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
[ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19041.757] (==) ServerLayout "Xorg Configured"
[ 19041.757] (**) |-->Screen "Screen0" (0)
[ 19041.757] (**) | |-->Monitor "Monitor0"
[ 19041.757] (**) | |-->Device "Card0"
[ 19041.757] (**) |-->Input Device "Keyboard0"
[ 19041.757] (**) |-->Input Device "USB Mouse"
[ 19041.757] (**) |-->Input Device "Touchpad"
[ 19041.757] (**) Option "DontZap" "False"
[ 19041.757] (**) Option "AllowMouseOpenFail" "true"
[ 19041.757] (**) Option "AutoAddDevices" "False"
[ 19041.757] (**) Option "AutoEnableDevices" "False"
[ 19041.757] (**) Not automatically adding devices
[ 19041.757] (**) Not automatically enabling devices
[ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19041.758] (II) Loader magic: 0x81f3280
[ 19041.758] (II) Module ABI versions:
[ 19041.758] X.Org ANSI C Emulation: 0.4
[ 19041.758] X.Org Video Driver: 8.0
[ 19041.758] X.Org XInput driver : 11.0
[ 19041.758] X.Org Server Extension : 4.0
[ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "record" will be loaded by default.
[ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dri2" will be loaded by default.
[ 19041.759] (II) LoadModule: "ddc"
[ 19041.759] (II) Module "ddc" already built-in
[ 19041.759] (II) LoadModule: "dbe"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] Module class: X.Org Server Extension
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension DOUBLE-BUFFER
[ 19041.759] (II) LoadModule: "dri"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19041.759] (II) Module dri: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension XFree86-DRI
[ 19041.759] (II) LoadModule: "extmod"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
[ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.760] Module class: X.Org Server Extension
[ 19041.760] ABI class: X.Org Server Extension, version 4.0
[ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
[ 19041.760] (II) Loading extension XFree86-VidModeExtension
[ 19041.760] (II) Loading extension XFree86-DGA
[ 19041.760] (II) Loading extension DPMS
[ 19041.760] (II) Loading extension XVideo
[ 19041.760] (II) Loading extension XVideo-MotionCompensation
[ 19041.760] (II) Loading extension X-Resource
[ 19041.760] (II) LoadModule: "glx"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
[ 19041.782] compiled for 4.0.2, module version = 1.0.0
[ 19041.782] Module class: X.Org Server Extension
[ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
[ 19041.782] (II) Loading extension GLX
[ 19041.782] (II) LoadModule: "synaptics"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
[ 19041.782] compiled for 1.9.4, module version = 1.4.0
[ 19041.782] Module class: X.Org XInput Driver
[ 19041.782] ABI class: X.Org XInput driver, version 11.0
[ 19041.782] (II) LoadModule: "record"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19041.783] (II) Module record: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
[ 19041.783] Module class: X.Org Server Extension
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension RECORD
[ 19041.783] (II) LoadModule: "dri2"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension DRI2
[ 19041.783] (II) LoadModule: "nvidia"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19041.783] compiled for 4.0.2, module version = 1.0.0
[ 19041.783] Module class: X.Org Video Driver
[ 19041.783] (II) LoadModule: "kbd"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4, module version = 1.6.0
[ 19041.783] Module class: X.Org XInput Driver
[ 19041.783] ABI class: X.Org XInput driver, version 11.0
[ 19041.783] (II) LoadModule: "mouse"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
[ 19041.784] compiled for 1.9.4, module version = 1.7.0
[ 19041.784] Module class: X.Org XInput Driver
[ 19041.784] ABI class: X.Org XInput driver, version 11.0
[ 19041.784] (II) LoadModule: "synaptics"
[ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
[ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19041.784] (--) using VT number 7
[ 19041.891] (II) Loading sub module "fb"
[ 19041.891] (II) LoadModule: "fb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19041.891] (II) Module fb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "wfb"
[ 19041.891] (II) LoadModule: "wfb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "ramdac"
[ 19041.891] (II) LoadModule: "ramdac"
[ 19041.891] (II) Module "ramdac" already built-in
[ 19048.959] (**) Option "CoreKeyboard"
[ 19048.959] (**) Keyboard0: always reports core events
[ 19048.959] (**) Option "Protocol" "standard"
[ 19048.959] (**) Option "XkbRules" "xorg"
[ 19048.959] (**) Option "XkbModel" "pc105"
[ 19048.959] (**) Option "XkbLayout" "de"
[ 19048.959] (WW) Option "XkbVariant" requires an string value
[ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
[ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
[ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
[ 19049.058] (==) USB Mouse: Protocol: "Auto"
[ 19049.058] (**) Option "SendCoreEvents" "true"
[ 19049.058] (**) Option "CorePointer"
[ 19049.058] (**) USB Mouse: always reports core events
[ 19049.058] (**) Option "Device" "/dev/input/mice"
[ 19049.191] (**) Option "Buttons" "5"
[ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 19049.191] (**) Option "ZAxisMapping" "4 5"
[ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
[ 19049.191] (**) USB Mouse: Buttons: 9
[ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
[ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
[ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
[ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
[ 19049.510] (**) Option "Device" "/dev/input/mouse0"
[ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
[ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
[ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
[ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
[ 19049.521] (**) Option "SHMConfig" "on"
[ 19049.521] (**) Option "LeftEdge" "1300"
[ 19049.521] (**) Option "RightEdge" "5900"
[ 19049.521] (**) Option "TopEdge" "1100"
[ 19049.521] (**) Option "BottomEdge" "5200"
[ 19049.521] (**) Option "FingerLow" "25"
[ 19049.521] (**) Option "FingerHigh" "30"
[ 19049.521] (**) Option "MaxTapTime" "180"
[ 19049.521] (**) Option "MaxTapMove" "220"
[ 19049.521] (**) Option "VertScrollDelta" "100"
[ 19049.521] (**) Option "VertTwoFingerScroll" "on"
[ 19049.521] (**) Option "MinSpeed" "0.06"
[ 19049.521] (**) Option "MaxSpeed" "0.6"
[ 19049.521] (**) Option "AccelFactor" "0.0040"
[ 19049.541] (EE) Query no Synaptics: 6003C8
[ 19049.541] (--) Touchpad: no supported touchpad found
[ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
[ 19049.558] (EE) PreInit returned NULL for "Touchpad"
Running synclient returns the following:
Couldn't find synaptics properties. No synaptics driver loaded?
Running syndaemon returns the following:
Unable to find a synaptics device.
The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
The section for the touchpad in /proc/bus/input/devices is the following:
I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=b
B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
B: ABS=11000003
I tried the following:
Removing the 10-synaptics.conf and commenting out the touchpad-section in the 10-evdev.conf
Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
Thanks for help

I commented the whole
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
#EndSection
part
and the appropiate line
#InputDevice "Synaptics Touchpad" "SendCoreEvents"
on Sever Layout.
It stopped the EE error, touchpad works here
but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
since I get
drini ~ $ synclient
Couldn't find synaptics properties. No synaptics driver loaded?

Synaptics Touchpad, double finger scroll and tap-to-click

I've recently lost tap-to-click functionality on my synaptics touchpad, I have no idea why because I haven't changed anything recently.
Here's my related xorg.conf file:
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "EmulateTwoFingerMinZ" "120"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "3"
Option "TapButton1" "1"
Option "TapButton2" "1"
EndSection
I'm not sure if I have hotplugging installed so I copied my 11-x11-synaptics.fdi file anyway and edited it:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.product" contains="ETPS/2 Elantech Touchpad">
<append key="info.capabilities" type="strlist">input.touchpad</append>
</match>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.AlwaysCore" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
<merge key="input.x11_options.SHMconfig" type="string">on</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.CircularScrolling" type="string">true</merge>
<merge key="input.x11_options.CircularScrollTrigger" type="string">3</merge>


</match>
</device>
</deviceinfo>

I have the same problem, my workaround is setting the options with synclient executed automatically on login.
Im quite annoyed though that gnome just overrides settings done in xorg and hal policies, can anyone tell where to look for gnomes information storage?
MC.

Synaptics touchpad 64-bit enhancements has stopped working.

Hi guys,
I recently bought new HP 15-r022tx Notebook PC (Product Number: J6M27PA) which comes with free dos, have installed windows 7 x64 and updated all drivers from hp online, after all latest update i get a error message on startup 'synaptics touchpad 64-bit enhancements has stopped working'.
have tried to configure mouse setting but wen i try to access mouse setting i get a error message 'unable to connect to synaptics pointing device driver'
have uninstalled and re installed the driver from hp support still the same problem.
so after some online search and no luck in any of them i continued using lap by closing the program on the first error message on every startup without any synaptics touchpad functions like two touch scrolling, zooming etc... but some times the cursor jumps around erratically and moves on its own with no contact in the touchpad, click options are not working wen cursor strats to move on its own, after some observation i noticed mouse works fine on every startup(by closing the program on error message without touchpads some special functions) until i right click it (sometimes after first click some times after many clicks) until i right click using the touchpad the mouse seems to be working fine but after i right click the mouse it goes to its own way.
any suggestions guys
thanks you guys.....
This question was solved.
View Solution.

Hello Zman07,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how the TouchPad on your notebook computer is behaving erratically, and I would be happy to assist you!
To restore the functions on your TouchPad, I recommend uninstalling the driver from Programs and Features and installing this specific Synaptics TouchPad Driver. This parcel of software should be compatible with your current system.
If the issue persists, I also suggest following this document on Using and Configuring the TouchPad (Windows 7 and Vista). This should help adjust the TouchPad to your preferences.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

[solved] Synaptics touchpad scrolling not working...

I have the device set up as follows in xorg.conf
Load "synaptics"
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.24"
Option "MaxSpeed" "0.48"
Option "AccelFactor" "0.0100"
Option "SHMConfig" "on"
EndSection
It works well, but I get no scrolling on the sides. Any ideas? I'm using KDE if that's of any relevance.
Thanks,
Shane
Last edited by krazyshane (2007-12-03 18:24:39)

Hmm.. I see no errors.
Here is my Xorg.0.log file:
[shane@Shane-Arch ~]$ cat /var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux Shane-Arch 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 4 11:34:08 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Alps touchpad"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1028,0191 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,0191 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,0191 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,0191 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,0191 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1028,0191 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,0191 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 14f1,5422 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 1028,2001 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,4401 card 1028,8127 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 104c,ac44 card d000,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 104c,8029 card 1028,0191 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:03:0: chip 8086,1043 card 8086,2565 rev 04 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf6000000 - 0xfbffffff (0x6000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd0000000/28, 0xfcff0000/16, I/O @ 0xc000/8, BIOS @ 0x80000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[1] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[2] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[3] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[4] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[5] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[6] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[7] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[10] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[14] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[1] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[2] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[3] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[4] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[5] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[6] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[7] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[10] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[14] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[20] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 6.7.195
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) ATI: ATI driver wrapper (version 6.7.195) for chipsets: mach64, rage128, radeon
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(--) Chipset ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[20] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[22] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[23] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[25] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[27] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[31] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[32] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[33] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xfcff0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0x80000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=24300
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-3, DACType-0, TMDSType-0, ConnectorType-2
(II) RADEON(0): Port1: DDCType-2, DACType-0, TMDSType-1, ConnectorType-4
(II) RADEON(0): Port4: DDCType-6, DACType-2, TMDSType-2, ConnectorType-1
(II) RADEON(0): Port5: DDCType-0, DACType-1, TMDSType-2, ConnectorType-6
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA_DDC" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI_DDC" initialized.
(II) RADEON(0): External TMDS Table revision: 2
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "GPIO_DDC" initialized.
(II) RADEON(0): Panel ID string: Y0316154X1
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Using LVDS Native Mode
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- VGA_DDC
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- External
DDC Type -- DVI_DDC
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- Proprietary/LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- GPIO_DDC
(II) RADEON(0): Port3:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- None
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "GPIO_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): DDC Type: 6, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on connector: Proprietary/LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3158 Serial#: 0
(II) RADEON(0): Year: 2003 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0): Y0316154X1
(II) RADEON(0): ůr`@
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3583100000000
(II) RADEON(0): 000d0103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0059
(II) RADEON(0): 303331360731353458310a20000000fe
(II) RADEON(0): 00c5af9e8e72604000010a2020200052
finished output detect: 2
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 6, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on connector: Proprietary/LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3158 Serial#: 0
(II) RADEON(0): Year: 2003 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0): Y0316154X1
(II) RADEON(0): ůr`@
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3583100000000
(II) RADEON(0): 000d0103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0059
(II) RADEON(0): 303331360731353458310a20000000fe
(II) RADEON(0): 00c5af9e8e72604000010a2020200052
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "SEC", prod id 12632
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[7] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[8] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[9] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[10] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[11] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[12] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[13] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[15] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[16] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[21] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[25] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[26] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[28] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[30] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[34] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[35] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1838000
(II) RADEON(0): Will use depth buffer at offset 0x1e14000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23f0000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf920000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf91f000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf71f000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf23f000
(II) RADEON(0): [drm] register handle = 0xfcff0000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 2
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6985
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Alps touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "VertScrollDelta" "100"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(--) Alps touchpad touchpad found
(**) Option "CorePointer"
(**) Alps touchpad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: doesn't report core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Alps touchpad)
(II) XINPUT: Adding extended input device "Alps touchpad" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(--) Alps touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(--) Alps touchpad touchpad found
and here's my entire Xorg.conf file. You will see that I have been playing with it some... with little/no success. Due to viewing the log I saw "Alps touchpad sets device to /dev/input/event6" so I tried changing my device to that with the same result, no scroll.
[shane@Shane-Arch ~]$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Alps touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "record"
Load "dri"
Load "extmod"
Load "xtrap"
Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
#MOUSE
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Alps touchpad"
Option "Device" "/dev/input/event6"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons"
# synaptic driver specific options
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.24"
Option "MaxSpeed" "0.48"
Option "AccelFactor" "0.01"
Option "SHMConfig" "on"
EndSection
#Section "InputDevice"
# Identifier "Touchpad"
# Driver "synaptics"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.24"
# Option "MaxSpeed" "0.48"
# Option "AccelFactor" "0.0100"
# Option "SHMConfig" "on"
# Option "SendCoreEvents" "true"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SEC"
ModelName "3158"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "LVDSBiosNativeMode" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
See anything wrong?
Thanks again for all the help.
-Shane

[SOLVED] Hotplugging Synaptics touchpad does not work

Hey there,
I tried to hotplug my touchpad with X.org/HAL but to no avail :(
Here's my /etc/hal/fdi/policy/11-x11-synaptics.fdi:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.product" contains="ETPS/2 Elantech Touchpad">
<append key="info.capabilities" type="strlist">input.touchpad</append>
</match>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">3</merge>
<merge key="input.x11_options.TapButton3" type="string">2</merge>


</match>
</device>
</deviceinfo>
However, lshal doesn't show that my touchpad's input.x11_driver = 'synaptics' thus X.org doesn't recognise it:
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event7' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input7/event7' (string)
I'm at a loss about how to solve this and I've disabled hotplugging as a temporary though not optimal measure. Someone help me :(
Last edited by rofflwaffls (2009-04-08 11:06:41)

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-ARCH i686
Current Operating System: Linux localhost 2.6.29-ARCH #1 SMP PREEMPT Sun Mar 29 18:08:33 UTC 2009 i686
Build Date: 02 March 2009 06:09:25PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 5 08:42:39 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:5:0) nVidia Corporation C51 [Geforce 6150 Go] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216, BIOS @ 0x????????/131072
(--) PCI: (0@0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xb0040000/262144
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.44 Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 6150 (C51) at PCI:0:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.51.28.53.15
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 6150 at PCI:0:5:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_variant" "dvorak"
(II) config/hal: Adding input device HID 062a:0000
(**) HID 062a:0000: always reports core events
(**) HID 062a:0000: Device: "/dev/input/event7"
(II) HID 062a:0000: Found 3 mouse buttons
(II) HID 062a:0000: Found x and y relative axes
(II) HID 062a:0000: Found scroll wheel(s)
(II) HID 062a:0000: Configuring as mouse
(**) HID 062a:0000: YAxisMapping: buttons 4 and 5
(**) HID 062a:0000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 062a:0000" (type: MOUSE)
(**) HID 062a:0000: (accel) keeping acceleration scheme 1
(**) HID 062a:0000: (accel) filter chain progression: 2.00
(**) HID 062a:0000: (accel) filter stage 0: 20.00 ms
(**) HID 062a:0000: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_variant" "dvorak"

Synaptics touchpad problem

Hi.
I've installed synaptics driver, followed all steps from Wiki and my synaptics its working. I only have one problem. When working in the middle of touchpad, sometimes it makes my firefox GO BACK some pages...What could be the problem and how can i resolve it ?

set the value of HorizScrollDelta to zero in the touchpads InputDevice Section xorg.conf,
or add the whole line if it doesn't exist.
Option "HorizScrollDelta" "0"
edit:
there are also some GUIs to configure the (synaptics) touchpads.
http://web.telia.com/~u89404340/touchpa … html#Links
Last edited by SiD (2007-04-10 09:00:18)

Synaptics touchpad doesn't save scroll settings after Windows 10 upgrade

Since the Windows 10 upgrade (upgraded from 7), the Synaptics Touchpad does not save scroll settings. Every time I shut down and restart the machine the next day, I have to go into settings to re-enable touchpad scrolling. It's always unchecked on restart. Please advise on how to fix this!

My solution, copied from one of many threads regarding this problem - You have Synaptics Port Touchpad driver installed via Windows Update. Here's is a work around until a fully Win10 compatible driver is issued. Win+X/ Device Manager/ Mice and other pointing devices/ Synaptics PS/2 Port TouchPad. R click/ Update Driver Software/ Browse my computer for driver software / Let me pick from a list of device drivers on my computer. Select the top or latest version of Synaptics PS/2 Port Compatible Touchpad Version 19.0.12.95 (7/15/2015) / Next and driver will install automatically. Reboot to finish install. Go to Settings/ Mouse Properties/ Synaptics Device Settings to access Touchpad settings, adjust to your liking/ Apply/ OK. Advise to tick 'Static tray icon in taskbar' for easy access to the settings tab until you're completely happy. This 19.0.12.95 is the latest one on the HP site for my model (your # may vary) and it installs 2 versions. The one Windows Update uses is the same date Port Touchpad version but the 'Compatible' one is installed at the same time. You can tell the difference immediately because it allows you to create a profile. The old 8.1 version did not and neither does the 'Compatible' one. The touchpad setting screens look the same as before (you'll notice the new one looks different and 3 finger press opens Cortana). Why do I consider this a workaround ? Because the 3-finger press app setting, one finger EdgeMotion and demo vids do not work. But at least you can set the scrolling, pinch zoom, speed and sensitivity to your liking and if you reboot, you'll see the system tray icon and your preferences have stuck. Hope this helps somebody !

Synaptics touchpad doesnt scroll after Windows 10 upgrade

I have HP Pavilion 15 Notebook PC, originally with Win 8.1. I upgraded to Window 10 on 05.08.2015. However, after upgrade the Synaptic touchpad scroll was not working, which I activated from Control Panel. But this activation is only a temporary solution as the setting goes off once the PC is rebooted. Please fix this issue.

See if solution in link below helps solve it http://www.andreafortuna.org/microsoft/2014/10/20/windows-10-solve-the-two-finger-scrolling-issue-for-synaptics-touchpads/ Open Registry Editor (Windows + R, type regedit and hit Enter)Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnhCreate a new DWORD called UseScrollCursor with a value of 0.Logoff or Restart

Spectre x360 (13-4101dx) Synaptics Touchpad Issue

Hello, I just bought a new Spectre x360 (13-4101dx, pre-loaded with Windows 10) and I'm having issues with the Synaptics touchpad. After a Windows update, the driver was updated to version 19.0.12.95. I have reverse scrolling disabled but for some applications, the two finger scrolling is still reversed. Applications like Google Chrome and Device Manager work fine, the reverse scrolling is disabled. However, for applications like Windows settings, Microsoft Edge, and pretty much everything Windows-related, it seems to be permanently reversed. Also, every time I restart my laptop, all of the settings are reverted back to default. Now, on my HP Envy 15-j000, I have the same driver (19.0.12.95) and I don't face the same issues with reverse scrolling being "permanent" on Windows-related applications. However, the settings do still reset itself after every reboot. How can I fix this? Will Synaptics be releasing a fixed driver for this or am I just missing something? I absolutely hate reverse scrolling and only a small handful of my applications actually run with it disabled...

I have this same issue with my HP OMEN using driver 19.0.12.95, windows update says this is the latest driver. Scrolling remains inverted in some apps/settings. I fixed this issue by reverting to an older driver (18.1.30.2), scrolling is now uniform. Kinda annoying that I had to fix it this way, but I had to go the HP Omen driver/support page and download the driver for the synaptics touchpad (even though HP's website insists you use Windows update for Windows 10). I then had to install the old driver, go into device manager and roll back the driver to 18.1.30.2 - you have to do this otherwise Win 10 will just use the latest driver. After that you can change the setting in the synaptics clickpad settings and it will be uniform. This was what worked for me.

Setting up Synaptics Touchpad in DV7t

Similar Messages

Maybe you are looking for